Sei sulla pagina 1di 6

Portfolio

Name: Issam Said

Nationality: British

Educations: Msc in Civil and Structural Engineering – The University of Sheffield 1994-1995

BEng Civil Engineering – Sheffield Hallam University 1992-1994

HND in Civil Engineering – Sheffield City Polytechnic 1990-1983

Work Experience

Date Location-Role Projects and Duties



Jan2019-Apr2019 Senior Structural Engineer -Analysis and designing both steel and reinforced concrete
Storage Tanks.
Balmoral Tanks - Designing special steel space roof tanks
Thutnscoe, Rotherham -Supervising and graduate Engineers and Cad Technicians.
All the design and analysis carried in accordance to Eurocodes and
American standards where seismic analysis required.
The Steel Tanks varies from small to very large in diameters and
heights.
-StaadPro design software was used in the space roof analysis and
in-house design spread sheet used for the steel wall designs.
- Tanks foundations vary from reinforced concrete in some cases to
steel supported on reinforced concrete foundation.

Feb2014-May 2019 Consultant Structural Carried out Multi storey design up to eight storeys high. Most of
Engineer building are residential reinforced concrete with shear force cores
Taha Mahmood Structural to resist the lateral shear force cause by the Earthquake forces.
and Architectural the floor slabs designed and constructed as ribbed hollow block
Consultancy slabs, Foundations mostly are isolated pads, other cases need raft
Amman foundations. As a consultant Engineer, I advise the architect on
Jordan. which schemes to follow and adopt for the design and meet the
client requirements.
Analysis and the structure design carried out by the Etabs
software, also Procken for structural elements design as columns,
beams, slabs and foundations.
Also, my duty checking the final design and structural drawings and
details before submitting it to the local authority for approval and
finally following up site work if there is any structural queries.

May2011-Jan2014 Senior Structural Engineer I was responsible for the structure department within the
Sabeel Al Handasah Consultancy. Main duty is to supervise the structure Engineers and
Structural And CAD Technicians, also design, detailing the Building designs.
Architectural; Consulting
Engineers.

Al Deeban Secondary school-Multi Purpose Hall
Madaba -Jordan

A large school consisting class rooms and sport Hall. The main
building cosiest of reinforced concrete columns and flat slabs
flooring, the sport Hall steel Rafters supported on reinforced
concrete columns. The stability and integrity of the structure
achieved by shear walls and the roof rafters used ties to resist the
spreading forces on the concrete columns due to large spans.
Carried out several site visits while constructions.
Plan Area = 5000 m2
Value 650 K JD

Hamdan Secondary Residential Flats, Amman -Jordan

Carried out the full analysis and the full design for Residential
flats with underground car park, the building was designed as
reinforced concrete of 8 story height, The floor slab designed
as Ribbed hollow block slab.
The car park columns were a need to be spaced large
distance therefore a transfer beams used to carry the
columns above.
Raft foundation was adopted due to the ground conditions to
limit the differential settlement.
Plane area
Total plan Area = 3000 m2
Value= 400 k JD

2008-2011 Senior Structural Engineer Self-employed designing building and liaising with architects and
Self employed contractors to carry out the structural design work including
Commercial, residential, schools,

2007-2008 Senior Structural Engineer Worked on designing steel framed structure for commercial
3E Consultant Engineers building and offices,
Assisting in analysis and design for large multi-storeys building in
Saudi Arabia.
Large steel trusses were used to overcome the roof large spans.

2006-2007 Senior Structural Engineer Worked on the design and detailing large secondary school -
Scot Wilson Doncaster.
Chesterfield The school was two storey building mainly steel frames with
prestressed hollow floor slabs.
Also worked on varies structures varies from retaining walls design
and assisting other department .
2004-2005 Senior Structural Engineer Designed and detail the 25 multi storey residential building. The
BWB Consulting building skeleton consist of reinforced concrete columns, with
Nottingham posttensioned flat slabs.

Due to the poor ground conditions a piled foundations 12-15m
deep was used. Reinforced concrete shear walls was used to
sustain the lateral stability.
I was also involved on other projects which another engineer were
designing.

2000-2002 Senior Structural Engineer Sweet Street Block of Flats- Leeds
Roscoe Capita PLC The project consists of four multi storey residential flats and
Sheffield two storey underground car parking.
Block 1-
22 storey Each floor area= 300 m2
The nett total area =6600 m2
The structure consists of reinforced concrete with concrete stairs
with solid shear walls to resist lateral wind loadings.
700 mm thick flat slab (Transfer slab}was used to overcome the
irregularity of the columns from above and below which are not
continuous all the way through.
Staad pro (FEA) was used for the analysis and design.
The rest of the blocks were on smaller scale in height.
Block 2 - 8 floors, 1600 m2
Block 3- 9 floors 1800 m2
Block 4-16 floors 3200 m2


2002-2004 Self Employed Position: Structural Engineer. (Contract work)
Structural Engineer Worked in The Building Control for checking the application for
Sheffield City Council structural approvals.
Then moved to the structure department where I carried out
structural design and detailing for new built schools. Also carried
out structural surveys for Sheffield city council schools.

1997-2000 Self Employed Local Authorities – Contract Base Jobs: 1997-2000
UK
Position: Structural Engineer

Worked for Leeds, East Riding and Leicester City councils.
Mainly involved for the checking and application for building
control applications for the structural calculations. Also designed
and detailed various local authorities including schools.
Carried out a number of structural survey for local authority’s
properties.

1984-1990 KUWAIT PREFABRICATD • Taking the project from planning stage through to completion
BUILDING COMPANY within cost and time restraints.
Kuwait
• Construction and overall management of projects such as schools,
commercial buildings, infrastructures and residential housings.
• Management of construction resources and co-ordination of
specialist sub-contractors, claims negotiation, and change orders.
• Liaison with client, supervision of subcontractors, programming of
works also detailed planning of activities, resources using
primavera.



Structural Engineering Software used in structural design


• Staad Pro Using finite element in designing Multi-Story Buildings
• FEM Software for analysis 3D structures
• Strap software for building design
• Scale
• Smart Modular (Finite element Computer Software – Used for modelling Reinforced Concrete Multi
Storey Buildings
• MasterSeries
• CSC Building Designer for Steelwork design
• Etabs
• Safe
• Proken
• Autocad
• Rivet

REGISTRATIONS:
• Member of Kuwait Engineering Society No. 10437
• Member of Jordanian Engineering Society – Consultant Engineer
• Ministry of Works – Jordan- Approved as consultant Engineer

Training Courses Certificates_ Jordanian Engineering Associations Training

Potrebbero piacerti anche