Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
EXECUTIVE SUMMARY
Comparison Chart
Infusion Pumps, Large-Volume
This Product Comparison covers large-volume infusion pumps (LVPs), some of which have two or more channels. Pumps in this report are calibrated in flow settings of milliliters per
hour (mL/hr) ranging from 0.1 to 3,600 mL/hr; most have a drug-/dose-calculation feature that permits programming of the flow setting directly from physician dose orders.
LVPs are used to accurately deliver liquids through intravenous (IV) or epidural routes for therapeutic and/or diagnostic purposes. They are used in hospitals, in alternative care
settings (e.g., homes, long-term care facilities, physicians' offices, outpatient infusion centers), and, occasionally, in emergency medical service vehicles.
In general, infusion pumps are used when the solution to be administered must be delivered with greater accuracy than can be provided through a manually adjusted gravity
administration set. Because they allow more accurate fluid delivery, infusion pumps have proven to be useful in applications such as continuous epidural anesthesia,
administration of IV cardiovascular drugs, chemotherapy, and autotransfusion, as well as in pediatric applications and for home IV therapy. Blood infusions can also be performed
with most pumps, although some pumps require a special administration set for this application.
LVPs can supply higher pressures than those provided by manually clamped gravity infusion sets or infusion controllers—for example, to deliver viscous fluids through micropore
bacteria filters or to deliver arterial infusions.
The following device terms and product codes as listed in ECRI Institute’s Universal Medical Device Nomenclature System™ (UMDNS™) are covered:
These devices are also called: general-purpose infusion pumps, microinfusion pumps, multichannel pumps, volumetric infusion pumps.
Comparison Chart
Infusion Pumps, Large-Volume
These devices are also called: general-purpose infusion pumps, microinfusion pumps, multichannel pumps, volumetric infusion pumps.
Purpose
LVPs are used to accurately deliver liquids through intravenous (IV) or epidural routes for therapeutic and/or diagnostic purposes. They are used in hospitals, in alternative care
settings (e.g., homes, long-term care facilities, physicians' offices, outpatient infusion centers), and, occasionally, in emergency medical service vehicles.
In general, infusion pumps are used when the solution to be administered must be delivered with greater accuracy than can be provided through a manually adjusted gravity
administration set. Because they allow more accurate fluid delivery, infusion pumps have proven to be useful in applications such as continuous epidural anesthesia, administration of
IV cardiovascular drugs, chemotherapy, and autotransfusion, as well as in pediatric applications and for home IV therapy. Blood infusions can also be performed with most pumps,
although some pumps require a special administration set for this application.
LVPs can supply higher pressures than those provided by manually clamped gravity infusion sets or infusion controllers—for example, to deliver viscous fluids through micropore
bacteria filters or to deliver arterial infusions.
Principles of Operation
LVPs use one of two basic types of pumping mechanisms to move fluid from the solution container through the IV set to the patient: peristaltic or cassette.
The most common peristaltic mechanism is the linear peristaltic device, which uses fingerlike disks to occlude the IV tubing successively in a rippling, wavelike motion. The tubing is
held against a stationary backing plate and alternately compressed and released by the moving fingers, forcing the fluid to flow. Similar to the linear peristaltic device, the rotary
peristaltic pump uses a short length of silicone rubber tubing held taut around rollers mounted on a rotor. As the rotor is turned at precise speeds by a motor drive, the rollers occlude
the tubing and force the fluid from the solution container into the patient at the preselected rate. The cycling rate of either a linear or rotary peristaltic mechanism is determined by a
stepper motor, which delivers a specific volume with each pulse; varying the infusion rate changes the frequency of the pulses.
The second type of pumping mechanism uses a cassette normally fitted with either a syringelike or pistonlike device and tubing running from two sides. In syringe cassettes, a motor-
driven plunger moves into and out of a cylinder. The inward motion pumps the fluid out of the cassette toward the patient, while the outward motion draws fresh fluid from the
solution container to refill the cassette. In some cassettes, a valve directs the flow along the desired path at the appropriate times in the plunger cycle.
In piston-actuated diaphragm cassettes, a diaphragm is mounted near a moving piston that displaces a fraction of a milliliter of fluid toward the patient with each inward stroke and
allows the diaphragm to refill with each outward stroke. A valve assembly directs the flow along the desired path at the appropriate time in the plunger cycle. This pumping mechanism
delivers the infusate in discrete volume increments, normally in a pulsating flow. The flow is automatically controlled by varying the piston stroke length and rate. Some pumps use a
pair of pistons to infuse the solution through a dual-chamber cassette.
Most infusion pumps allow the user to select the dose or volume to be infused (VTBI). If this limit is reached before the fluid source is depleted, most pumps will alarm and continue
infusing fluid at a very low rate to prevent the infusion catheter from clogging. This low flow is referred to as the “keep vein open," or “KVO," rate.
Many pumps can deliver secondary (piggyback) infusions, controlling two different solutions sequentially per pumping channel. A variety of mechanisms control primary and secondary
infusions; most pumps require a special administration set with a check valve that prevents secondary infusate from flowing up to the primary bag. Pumps capable of piggyback
delivery can be programmed to revert to a primary flow setting after the secondary infusion dose is delivered. Many models require users to hang the primary bag lower than the
secondary bag; gravity forces the secondary bag to flow until it is empty, at which time the primary bag begins to flow again.
Pumps may have more than one infusion channel. Multichannel devices can simultaneously infuse from and monitor two or more IV lines and can be substituted for several single-
channel infusion pumps that might be used on one patient. One model is modular, permitting up to four pump modules to be attached to a common programming module.
Most infusion pumps sold in the USA, and some marketed globally, now have a dose error reduction system (DERS) or onboard protocol library. Also called “smart pumps," these
devices aid in prevention and warn users of programming errors that could result in under- or overdelivery, and some systems include starting dose parameters. These systems allow
infusion pumps to warn users if the rate programmed is above the set limit for that medication, calculation errors, or misprogramming that would result in significant under- or
overdelivery of a drug, electrolyte, or other fluid. DERS are an important part of a facility's defenses against medication errors and are available on large-volume (also known as
general-purpose), syringe, patient-controlled analgesic (PCA), and ambulatory pumps. To implement such a system, a facility must establish standardized concentrations and
minimum/maximum dose limits for pain medications used in each clinical location (including limits for continuous, bolus, and total dose parameters); all pumps are then programmed
with these parameters in a drug or protocol library.
To give an infusion, a nurse selects the appropriate clinical location/application (e.g., "ICU" or “orthopedic post-op") and then the correct drug entity (name, volume of the reservoir,
and concentration or total drug amount in diluent). The clinician then enters any required patient-specific parameters like starting dose parameters and weight, and the pump will
display a warning if programmed parameters would result in a rate that is outside the predetermined limits for the selected drug. For “soft limits," the nurse can either change the
programmed dose or override the warning and start the pump as programmed. For “hard limits," the nurse must change the settings so that the dose is within the acceptable limits.
Many infusion pumps with a protocol library have both soft- and hard-limit capabilities, which gives the facility the ability to set up the drug library so that any given drug entity may
have only soft limits, only hard limits, or soft limits nested within hard limits. The drug name and concentration are also displayed during infusion.
Some pumps that lack full DERS features offer a programmable or downloadable drug library that allows a clinician to program a pump by selecting a dosing protocol from a computer
via a wired or wireless connection. When a clinician chooses a protocol, the pump is populated with the drug name, concentration, starting dose, time-based dosing limit, and lockout
interval, thus eliminating the possibility of entry errors in initial programming.
Pumps have a series of alarms that warn the operator of conditions in the infusion system that could be harmful to the patient. These include air in line, upstream or downstream
occlusion, empty fluid container, set disengagement, and flow error. Alarm conditions are detected by pressure and/or ultrasonic transducers and optical sensors. A few pumps can
interface with the facility's nurse call system to send alarm conditions to the central nursing station.
Most pumps also have a memory that can retain the programmed settings and the total volume infused in case of temporary power interruption. Most pumps with memory can log
data, such as pump settings, alarm occurrences, system errors, user key presses, and the time and date of each event. In addition, a data port, such as an RS232 or Ethernet port,
allows hospitals to retain electronic or hard copies of infusion data. Some pumps have optional wireless capabilities for transferring data (such as more detailed logs or drug libraries)
to and from a centralized server over a hospital's wireless network.
Many infusion pumps are wireless, which enables wireless drug library updates, infusion pump log analysis, and pump integration. Infusion pump integration is the connecting of pump
servers with other information systems to ensure that pump programming matches provider orders. There are two ways to integrate, namely autoprogramming and
autodocumentation. Autoprogramming increases the safety of infusions by engaging the pump's drug library as well as preventing manual data entry errors. Autodocumentation
automatically populates the patient's records with accurate infusion administration information, thus reducing the documentation burden on caregivers and expediting workflow.
Reported Problems
Infusion devices are the subject of many adverse incident reports to the Food and Drug Administration (FDA) and the consequences of infusion errors can be severe. Patients can be
highly sensitive to the amount of medication or fluid they receive from infusion pumps, and some medications are life-threatening if administered in the wrong amounts or to the
wrong patient. In April 2010, FDA issued a white paper about improving infusion pump safety and announced that it would be looking into the devices in order to aid in the
development of safer and more effective infusion technologies and practices. FDA noted that many of the reported infusion pump problems were unrelated to manufacturer or
brand, or even technology; the most common problems included software defects and user interface issues (e.g., confusing or unclear instructions). Medication errors due to infusion
pump mechanism malfunctions occur less frequently, usually when a pump has been damaged or in rare instances of problems with pump administration sets.
Medication errors that occur with infusion pumps often result from (1) an operator failing to correctly program the infusion order into the pump or (2) a physician issuing an incorrect
or inappropriate order. Such errors can be reduced by establishing clear protocols for ordering infusions and programming pumps (e.g., double-checking medication orders) and by
using pumps with dose-calculation capabilities; these steps will simplify or even eliminate the somewhat error-prone process of performing manual dose calculations. However, even
when these measures are observed, administration errors can still occur (e.g., if a decimal point is omitted or if an incorrect dosing unit is programmed).
Gravity flow, or free-flow (a situation in which fluid flows into the patient without being controlled by the infusion pump) used to be a significant risk of infusion therapy, but over-
infusion due to gravity flow is rarely reported now that ECRI Institute and the Joint Commission consider infusion pumps without set-based free-flow protection to be unacceptable for
purchase or rental. However, gravity flow can still occur if the operator manually opens the set's anti-free-flow clamp or valve.
Infiltration (also called extravasation) is the extravascular accumulation of a solution being infused. This can result in tissue irritation, compartment syndrome, or tissue necrosis; in
addition, the patient is denied the necessary fluids or medications. A number of infiltration incidents have been reported to ECRI Institute implicating all types of infusion pumps.
However, infusion pumps typically play only an ancillary role in such incidents, and the belief that pumps themselves produce infiltration is inaccurate. Rather, the usual causes of
infiltration are dislodgment or improper insertion of either a catheter or, in the case of a subcutaneous injection port, a needle. Thus, to avoid problems, staff members should
monitor IV sites of patients who are receiving infusions through pumps at least hourly to ensure that catheter or needle dislodgment and subsequent infiltration do not occur.
ECRI Institute has received reports about infusion pump cleaning-related problems including difficulty with complying with manufacturer's cleaning instructions and inappropriate
cleaning methods that can result in equipment damage and affect the device's functionality. Repeated use of incompatible cleaning agents can damage equipment surfaces and
degrade plastics, resulting in equipment malfunction including improper battery or inter-unit interface connections. These connection failures can result in frequent alarms, infusion
interruptions, and potentially patient harm.
An inconsistency in the time format between the infusion pump and the EMR can lead to confusion and incorrect time entry on the infusion pump. If the time is entered incorrectly,
infusion therapy rate may be affected resulting in overinfusion or underinfusion of medication, which can lead to patient harm. ECRI Institute recommends verifying time entry format
or using pump integration to avoid the need for manual data entry on the pump to help avoid this hazard.
Infusion errors can be deadly, but simple safety practices can greatly decrease the likelihood of harm. These steps include noticing signs of physical damage to the infusion pump
components, ensuring appropriate use of the roller clamp on the IV tubing, and checking the drip chamber beneath the medication reservoir for unexpected flow. These practices are
commonplace and critical for patient safety.
Purchase Considerations
ECRI Institute Recommendations
Included in the accompanying comparison chart are ECRI Institute's recommendations for minimum performance requirements for LVPs. In general, LVPs should be able to provide a
flow of 0.1 to at least 999 mL/hr and maintain an accurate flow rate to within 5% of flow settings.
ECRI Institute believes that pumps with a DERS will significantly reduce calculation, transcription, and misprogramming errors. ECRI Institute does not recommend using an infusion
pump without a DERS for general patient care. The library should cover at least 10 care areas with at least 100 drug entities per care area. Some units may be able to be extensively
configured with each drug entity and care area. Units that default to the DERS ensure that the user is forced to opt out from the safety software if attempting to infuse without safety
limits. The system must also be able to connect wirelessly to the Internet.
ECRI Institute considers set-based free-flow protection a required feature on all newly purchased infusion pumps. Facilities that currently own pumps that do not use anti-free-flow
infusion sets should make their replacement a very high priority. ECRI Institute has rated all pumps without set-based free-flow protection Unacceptable. The Joint Commission had
included free-flow protection in its National Patient Safety Goals since July 2002. Although the patient safety goal pertaining to free-flow protection was retired for 2006, hospitals will
still be expected to comply with the retired goal under the Joint Commission's Environment of Care standard EC 6.20 (see Health Devices 2004 Dec).
LVPs should alarm and stop infusing when air-in-line volume reaches a level of 100 µL. The alarm should also not activate in response to air volumes of less than 50 µL. This
recommendation is based on the practical consideration that volumes below 50 µL would trigger nuisance alarms for outgassed microbubbles, which are common and
nonthreatening. LVPs detect upstream occlusions. In addition, pumps should have alarms and indicators for downstream occlusions, infusion complete, set loaded improperly, door
open, circuit malfunction, and low/depleted battery. LVPs should also have a log of alarms, volume infused, dose limit warnings, and key presses. The log should be able to store
information from a full week.
The pump should be designed to revert to a KVO rate between 1 and 5 mL/hr (but not greater than the programmed flow rate) once the programmed volume is delivered. Pumps
should have an automated secondary (piggyback) infusion that switches from a programmed secondary flow rate to the primary flow rate once it has delivered the secondary volume.
ECRI Institute recommends that LVPs have integral batteries that can run for at least 5 hours at a flow rate of 25 mL/hr, are commonplace, and are easily replaced. Batteries should
fully recharge in less than 8 hours and should be capable of charging independently of the main power switch. In the case of a line-power failure, pumps should automatically switch
over to battery power. All LVPs should be fluid-proof and should automatically alarm and shut down if fluid penetrates the electronic circuitry. LVPs should also be able to connect to
the hospital's wireless network and communicate to a central pump server.
As with many devices, purchasing infusion pumps is much more complicated than it used to be. Infusion system purchases involve buying a complete drug delivery platform, including
pumps, software, and communication interfaces. In addition, if a facility plans to utilize wireless networking capabilities on its infusion pumps, they must ensure that the hospital
network is equipped to provide reliable wireless communication everywhere a pump will be. Finally, to experience the safety benefits of DERS, a large commitment to drug
standardization and drug library development is required.
Buying a pump involves establishing a long-term relationship with the pump's supplier for initial implementation, product upgrades, and ongoing support. The barrier to switching
suppliers once a facility has already implemented a smart pump model is also much higher than with traditional pumps: if a facility is going to switch, it will probably have to make
changes to the drug library, which can be time-consuming. The facility will also need to consider that the differences in operation between the devices means that users will need to
be retrained, and the differences in the log-analysis and library-editor tools may mean that it is possible to lose some of the expertise administrators have developed from working
with the previous system.
Other Considerations
Before choosing a new infusion pump, healthcare facilities should first consider their needs. Determine the number of pumping channels needed, and find out whether it is
advantageous to purchase single-channel pumps, multichannel pumps, or both. Facilities should attempt to standardize on one supplier's LVP or family of pumps (that use the same
administration set and control panel) for use throughout the hospital. Standardization will greatly simplify protocol library implementation and maintenance, user training, and supplier
involvement. If standardization on a single model is impractical, the next most desirable option is to standardize on a single supplier's product line.
Apart from the basic concerns for pump safety and performance, pumps must include data logs that store all user interactions and pumps settings. A date- and time-stamped event
log (typically activated in service mode) is extremely valuable in determining the cause of a pump-associated adverse incident. Pumps with a DERS should have a separate log that
records dose limit events and clinician responses (e.g., override soft limit, reprogram pump).
Because DERSs vary greatly in their features and functionality, evaluating these systems is a critical part of the pump selection process. Some features to look for include larger drug
libraries, wireless connectivity, log-analysis software, and interfaces between a pump server and third-party information systems. Wireless connectivity can allow pushing new drug
libraries or dosing information to the pump as well as pulling event logs from the pump. Log analysis software is useful for tracking near misses, monitoring the use of the drug library,
and for refining the library to match the clinical needs of the practice. In addition, interfaces between the pump and EMRs or pharmacy dispensing systems are desirable.
Establishing drug libraries and limits requires planning and clinician compliance. Some facilities wish to include a clinical trial in their selection process; generally, smart-pump vendors
work with facilities to identify a few representative clinical locations in which to deploy trial pumps and then develop a small drug library for those locations. Such a library is typically
limited to five or six drugs per location, with the drugs being those that pose the greatest risk or that are delivered most frequently (or some combination of both). Other vendors
prefer to forgo the trial process, opting instead for clinical simulations to allow clinicians to assess the interface and functionality of their pump model. Drug library editing and log
analysis are two of the most important elements of successful smart pump-implementation, so any pump selection process should also include an assessment of the vendors'
software applications for these functions. Hospitals should also consider the vendor's ability to assist with drug library creation, training, and overall smart pump implementation.
Pump vendors often play a valuable role in the implementation of such a system because they are generally more experienced than the hospital and can assist with specific library
development questions. Therefore, vendors who are established within several hospitals, and/or offer a comprehensive support program should be considered.
Medical device integration (MDI) is of growing interest to hospitals in the United States, and interest in connecting pump servers to other information systems is growing in two
applications: (1) automatically programming infusion pumps or checking manual programming against electronic provider orders, and (2) automatically documenting infusion status
and administration in a patient's electronic medical record. Hospitals that wish to connect their infusion pump servers to other information systems should carefully document their
expectations of such an implementation, and should carefully consider whether each pump and information system supplier can support these expectations. For further information,
refer to ECRI Institute's Health Devices citations in the bibliography of this report.
Cost Containment
Because infusion pumps entail ongoing maintenance and operating costs, the initial acquisition cost does not accurately reflect the total cost of ownership. A life-cycle cost (LCC)
analysis that takes into account the cost of software licenses, maintenance, and upgrades; disposables (e.g., primary and secondary infusion sets, needleless accessories); device
maintenance; and personnel training should be prepared. Many suppliers offer various programs for rental, lease, or purchase of infusion pumps, including volume discounts.
An acquisition decision should be based on issues such as LCC, local service support, discount rates and non-price-related benefits offered by the supplier, and standardization with
existing equipment in the department or hospital (i.e., purchasing all infusion pumps from one supplier). Prices quoted from the suppliers (not list prices) will be needed to make a
useful cost comparison. Hospitals interested in purchasing infusion pumps with a DERS should also be aware of additional fees for software licensing, software maintenance, and
implementation consulting. The software licensing fee is a one-time fee paid at the time of purchase that covers the right to use the supplier's DERS software. The software
maintenance fee is an annual fee that covers software updates, patches and virus protection, and other technical support. The implementation consulting fee is a one-time fee paid
at the time of purchase, covering services such as staff and clinician training and developing a customized drug library. ECRI Institute recommends taking advantage of supplier
licensing, maintenance, and consulting plans; therefore, hospitals should consider these fees when requesting quotes for pumps with a DERS. Fees for developing and maintaining
interfaces to other information systems (if MDI is desired) should also be considered in a cost comparison.
Stage of Development
Pumping mechanism technology has remained stable; however, notable developments include smaller and lighter pumps, and infusion pump integration.
Some pumps with DERSs offer wireless connectivity between pumps and a server, allowing the transfer of event and alarm logs from the pumps to the server in near-real-time and
the transfer of new drug libraries from the server to pumps. This capability enhances the use of DERSs by allowing for regular review of alarm and event logs for library revision (an
important maintenance activity) and updates to drug libraries without the need for locating pumps and physically connecting them to a computer.
Standardizing infusion devices that have DERS capabilities can be a struggle for facilities. Replacing pumps with DERS-capable systems may not be possible for facilities that are
under contract with an original equipment manufacturer (OEM). Standardization is also difficult in areas where pumps are purchased for specific criteria and applications. A lack of
proper training on these devices, coupled with frequent staff turnover can often negate the benefits provided by the DERS-capable pumps.
Some pumps with server-based architecture may be interfaced with other hospital information systems (e.g., pharmacy information systems, electronic medication administration
records) to populate these systems with real-time or near-real-time administration information; order-checking and auto-documentation capabilities are possible. This would require a
method of accurately associating infusion pumps with patients (e.g., bar-code readers), a network connection between the pumps and the server to populate the server with updated
log information from the pumps, and customized software to pull administration information from these logs and send it to other hospital systems. Pump integration is being driven
both by safety concerns and by the desire to electronically document infusion activities, the latter of which will allow hospitals to meet meaningful use goals required by the Health
Information Technology for Economic and Clinical Health (HITECH) Act of 2009. Infusion pump integration to computer-provided order entry systems, electronic medical records
(EMRs), and even patient monitors can dramatically reduce medication administration errors. It is rapidly expanding and is available from most vendors.
BIBLIOGRAPHY
Breland BD. Continuous quality improvement using intelligent infusion pump data analysis. Am J Health Syst Pharm 2010 Sep 1;67(17):1,446-55.
Burdeu G, Crawford R, van de Vreede M, et al. Taking aim at infusion confusion. J Nurs Care Qual 2006 Apr-Jun;21(2):151-9.
Cummings K, McGowan R. “Smart" infusion pumps are selectively intelligent. Nursing 2011 Mar;41(3):58-9.
ECRI Institute. A road map for medical device interoperability: seven key steps to help your facility establish and maintain interoperability [guidance article]. Health Devices 2013
Feb;42(2):62-6.
BD—Alaris Pump Modules: ECRI Institute members continue to report inter-unit interface connector problems [ECRI Exclusive Hazard Report]. Health Devices 2017 Nov 1.
Checklist: dose error reduction systems. Health Devices 2007 Oct;36(10):332-6.
Choosing an air-in-line alarm threshold: why we recommend 100 μL. Health Devices 2016 Feb 3.
Dose error reduction systems: features and functions. Health Devices 2015 Feb 25.
Ease of use: a critical component of infusion pumps. Health Devices 2015 Feb 25.
ECRI Institute's infusion pump criteria [guidance article]. Health Devices 2008 Feb;37(2):52-8.
Epidural infusion pumps: safe selection and use. Health Devices 2017 May 31.
Evaluation background: large-volume infusion pumps. Health Devices 2017 Jan 11.
Executive brief: top 10 health technology hazards for 2017. Health Devices 2016 Nov.
General-purpose infusion pumps [inspection and preventive maintenance procedure]. BiomedicalBenchmark. Procedure no. 416-20081015-01.
Infiltration during infusion therapy: why it occurs and how to prevent it. Health Devices 2016 Feb 3.
Infusion errors can be deadly if simple safety steps are overlooked. Health Devices 2016 Nov 4.
Infusion pump dose error reduction systems [guidance article]. Health Devices 2004 Dec;33(12):427-9.
Infusion pump inspection frequencies: how often is enough? Health Devices 2016 Feb 3.
Infusion pump integration: why is it needed, and what are the challenges? [guidance article]. Health Devices 2013 Jul;42(7):210-21.
Infusion pumps. Healthc Risk Control 2011 Jul;3, Medical Technology 15:1-9.
Infusion pumps/electronic medical records—time format inconsistency may lead to over—or underdelivery of medication [ECRI Exclusive Hazard Report]. Health Devices
Alerts 2017 Nov 30.
Infusion pumps—failure to follow manufacturers' recommended cleaning instructions may cause premature device failures. [ECRI Exclusive Hazard Report]. Health Devices
Alerts 2016 Jun 16.
Infusion pumps to consider for use with hyperbaric chambers. Health Devices 2016 Feb 17.
Infusion pumps: understanding key terms and concepts. Health Devices 2016 Feb 3.
Infusion technology purchasing: it's not just about pumps. Health Devices 2015 Feb 25.
Large-volume infusion pumps: features and functions. Health Devices 2015 Feb 25.
MR-conditional pumps: the smarter choice for infusions in the MR environment. Health Devices 2015 Jul 29.
Tips and tools for a smart pump clinical assessment. Health Devices 2017 Jan 6.
What is infusion pump integration, and which models offer it? Health Devices 2018 Jan 17.
Gebhart F. Are smart pumps being used intelligently? Drug Topic Suppl [online]. 2007 Aug 20 [cited 2017 Nov 15]. Available from Internet:
http://www.drugtopics.com/hospitalhealth-system-pharmacy.
Healthcare Technology Safety Institute. Best practice recommendations for infusion pump-information network integration. 2012 [cited 2017 Nov 15]. Available from Internet:
https://www.pharmamedtechbi.com/~/media/Supporting%20Documents/The%20Gray%20Sheet/38/33/Infusion_Pump_White_Paper_Aug4.pdf
Iacovides I, Blandford A, Cox A. Infusion standardization and dose error reduction software. Br J Nurs 2014 Jul;23 Suppl 14:S16-24.
Ibarra-Perez R, Puertolas-Balint F, Lozano-Cruz E, et al. Intravenous administration errors intercepted by smart infusion technology in an adult intensive care unit. J Patient Saf
2017 Apr 1 [Epub ahead of print].
Infusing Patients Safely. Priority issues from the AAMI/FDA infusion device summit. 2010 [cited 2017 Nov 15]. Available from Internet:
http://s3.amazonaws.com/rdcmsaami/files/production/public/FileDownloads/Summits/AAMI_FDA_Summit_Report.pdf
Koutnik E. Infusion pumps are reducing medication errors Pharm Times [online]. 2004 Nov 1 [cited 2017 Nov 15]. Available from Internet: http://www.pharmacytimes.com.
O'Brien G, Edwards S, Littlefield K, et al. Securing wireless infusion pumps in healthcare delivery organization NIST SP 1800-8 Practice Guide, DRAFT [online]. 2016 July [cited
2017 Dec 5]. Available from the Internet: https://nccoe.nist.gov/publication/1800-8/.
Phelps PK. Smart infusion pumps: implementation, management, and drug libraries. 2nd ed. Bethesda: American Society of Health-System Pharmacists; 2011.
Sparnon E. Select smarter pumps that work for you. Mater Manag Health Care 2009 Jul;18(7):30-2.
Trbovich P, Easty A. Smart pump implementation: a guide for healthcare institutions. 2012 [cited 2017 Nov 15]. Available from Internet:
http://www.aami.org/htsi/SI_Series/Smart_Pump_Implementation.pdf.
Weinger MB, Kline A. Reflections on the current state of infusion therapy [online]. Biomed Instrum Technol 2016 Jul-Aug;50(4):253-62.
Wetterneck TB, Skibinski KA, Roberts TL, et al. Using failure mode and effects analysis to plan implementation of smart i.v. pump technology. Am J Health Syst Pharm 2006
Aug;63(16):1,528-38.
RESOURCE LIST
Comparison Chart
Infusion Pumps, Large-Volume
RELATED RESOURCES
UMDNS
Infusion Pumps, Multitherapy, Large Volume [28-057]
Infusion Pumps, Multitherapy, Large Volume, MRI Safe/Conditional [28-063]
Infusion Pumps, Multitherapy, Large Volume, Multichannel [17-634]
Infusion Pumps, Multitherapy, Large Volume, Single-Channel [27-889]
Manufacturer Advance Medical Technology AMPall Co Ltd Arcomed AG Ascor Med Sp z o o
Co Ltd IP-7700 Volumed µVP7000 AP 31
AM-601A
WHERE MARKETED Worldwide, except USA Worldwide, except Canada and Worldwide<1> Worldwide, except USA
USA
FDA CLEARANCE No No No No
CE MARK (MDD) Yes Yes Yes Yes
CONFIGURATION
Number of channels 1 1 1 1
DISPLAY
Data displayed Time, battery capacity, infusion Infusion rate, infused volume, Infusion parameters, history All alarms and indicators, all
status, mode, rate, accumulated VTBI, infusion time, remaining infusion data, all settings
volume, pressure, bed number, time, remaining battery capacity,
drug temperature, department, IV increasing pressure level, text
specification, air bubble, empty, and symbol for alarm and pre-
completion, occlusion, faulty alarm situations, medication set-
signal, misoperation. up, other
PUMP CAPABILITIES
Flow range, mL/hr 1-1,200 0.1-1,000 0.1-999 1-1,000
Increments, mL 0.1 0.1 0.01, 0.1, 1, 10, 100, 1,000 1
Accuracy, % 2 5 5 5
Pressure, psi Not specified 4.5-14.5, adjustable 0.0193-19.31 5.8-11.6 (0.145 increments)
Autoprogramming Not specified Not specified With bedside module Not specified
DATA PORT Not specified RS232 Wireless communication between RS232 (for printing out event logs
pumps with or without docking only)
station
Events stored Not specified Not specified Settings, alarms, system errors Yes
POWER SOURCE
Line power, VAC (Hz) 100-240 (50/60) 115-230 (50/60) 110-230 (50/60) 200-240 (50/60)
Recharge time, hr 8 6 8 24
H x W x D, cm (in) 18.8 x 19.8 x 28.8 (7.4 x 7.8 x 10 x 19 x 25 (3.9 x 7.5 x 9.8) 24.5 x 9 x 18 (9.6 x 3.5 x 7) 23 x 14 x 23 (9 x 5.5 x 9)
11.3)
WEIGHT, kg (lb) 2.2 (4.9) 3.5 (7.7) 2.4 (5.2) 3.6 (8)
PURCHASE INFORMATION
List price Not specified $520 Not specified Not specified
Warranty 1 year 2 years 2 years 2 years
UMDNS CODE(S) 27889, 28057 27889, 28057 27889, 28057, 28063 27889, 28057
LAST UPDATED December 2017 January 2018 January 2018 December 2017
Supplier Footnotes
Model Footnotes
Max units per pole ≤18 with B Braun Station ≤16 with B Braun Space pole ≤16 with B Braun Space pole Depends on pole
compact plus
DISPLAY
Data displayed Drug/solution name, rate, dose, Drug/solution name, rate, dose, Drug/solution name, rate, dose, Drug/solution name, rate, dose,
battery life indicator, infusion within or outside soft limits, no within or outside soft limits, no VTBI, care area, location, time
running, drug concentration, limits assigned, battery life limits assigned, battery life remaining, bolusing, indicator bar
volume, dose and time since indicator, infusion pressure, indicator, infusion pressure, with current dose/rate marker and
infusion started infusion running, drug infusion running, drug associated soft and/or hard
concentration, volume, dose and concentration, volume, dose and DoseGuard/RateGuard limit
time since infusion started, care time since infusion started, care values
unit, therapy mode, wireless unit, therapy mode, wireless
status status
PUMP CAPABILITIES
Flow range, mL/hr 0.1-1,200 0.1-1,200 0.1-1,200 0.1-999.9; 0.1-99.9 (micro)
Increments, mL Not specified 0.01 (<99.99 mL/hr), 0.1 (100- 0.01 (<99.99 mL/hr), 0.1 (100- 0.1
999.9 mL/hr), 1 (1,000-1,200 999.9 mL/hr), 1 (1,000-1,200
mL/hr) mL/hr)
KVO rate, mL/hr Not specified Configurable (limits) Configurable (limits) 0.1-3
Accuracy, % 5 5 5 5
Syringe delivery Not specified No (Perfusor Space syringe No (Perfusor Space Syringe Yes
module available) module available)
MRI conditional Not specified With MRI Station With MRI Station<1> No
Pressure, psi Not specified Max 15.4 (1,060 mbar) Max 15.4 (1,060 mbar) 1.5-15
Depleted battery Not specified Pump will run on AC power Pump will run on AC power Yes, pump will run on AC power
with depleted battery
Clinical advisory messages Not specified Yes Yes Yes
AUDIBLE ALARM
Library size 3,000 ≤1,200 drugs divided in ≤30 drug ≤1,200 drugs divided in ≤30 drug 9,000 drugs, 750 solutions
categories 16 patient condition categories 16 patient condition
profiles; ≤10 concentrations for profiles; ≤10 concentrations for
long drug name long drug name
No. of care areas ≥30 15 50 15
No. of drug entities per Not specified ≤1,200 ≤1,200 600 drugs, 50 solutions
care area
Wireless connectivity With data module Yes Yes No
Log-analysis software Not specified Space DoseTrac provides real Space DoseTrac provides real DoseTrac with RealTime views
time views and retrospective time views and retrospective
reporting reporting
DATA PORT Ethernet, USB, Wi-Fi, HDMI, Mini Ethernet, RS232, USB, Ethernet, RS232, USB, Nurse call interface, Ethernet
DIN 9 with Data module compact master/slave, wireless LAN, PS/2 master/slave, wireless LAN, PS/2 (configuration and download)
plus with SpaceStation and with SpaceStation and
SpaceCom SpaceCom
EVENT LOG Not specified Yes Yes Yes
Printout Not specified Yes Yes Yes
Number of events Not specified 3,000 3,000 3,024
Events stored Not specified All keystrokes/inputs and infusion All keystrokes/inputs and infusion Settings, alarms, system errors,
data data all changes, drug menu, dose
limit warning
POWER SOURCE
Line power, VAC (Hz) Not specified 100-240 (50/60) 100-240 (50/60) 120-240 (50/60)
Battery Lithium ion Ni-MH, lithium ion (Wi-Fi) Ni-MH, lithium ion (Wi-Fi) Ni-MH
Life, hr @ flow (mL/hr) 6 @ 25 12 @ 100 (Ni-MH, lithium ion), 4 12 @ 100 (Ni-MH, lithium ion), 4 7 @ 25
@ 100 (lithium ion wireless) @ 100 (lithium ion wireless)
H x W x D, cm (in) 9.8 x 22.9 x 22 (3.9 x 9 x 8.7) 6.8 x 21.4 x 12.4 (2.7 x 8.4 x 4.9) 6.8 x 21.4 x 12.4 (2.7 x 8.4 x 4.9) 11.4 x 30.5 x 22.2 (4.5 x 12 x 8.7)
PURCHASE INFORMATION
List price Not specified $2,550 $2,550 $3,000
Warranty Not specified 1 year 1 year 1 year
UMDNS CODE(S) 27889, 28057 13215, 28057 27889, 28057 27889, 28057
LAST UPDATED March 2019<1> August 2018 August 2018 November 2017
Supplier Footnotes
Model Footnotes
Max units per pole Depends on pole Depends on pole Depends on pole Depends on pole
DISPLAY
Data displayed Drug/solution name, rate, dose, Drug/solution name, rate, dose, Drug/solution name, rate, dose, Mode, rate, VTBI, time, KVO rate,
VTBI, care area, location, time VTBI, care area, location, time VTBI, care area, location, time total infusion time, battery left,
remaining, bolusing, indicator bar remaining, bolusing, indicator bar remaining, bolusing, indicator bar total operation time
with current dose/rate marker and with current dose/rate marker and with current dose/rate marker and
associated soft and/or hard associated soft and/or hard associated soft and/or hard
DoseGuard/RateGuard limit DoseGuard/RateGuard limit DoseGuard/RateGuard limit
values values values
PUMP CAPABILITIES
Flow range, mL/hr 0.1-999.9; 0.1-99.9 (micro) 0.1-999.9; 0.1-99.9 (micro) 0.1-999.9; 0.1-99.9 (micro) 0.1-800
Increments, mL 0.1 0.1 0.1 0.1
Accuracy, % 5 5 5 5
MRI conditional No No No No
Depleted battery Yes, pump will run on AC power Yes, pump will run on AC power Yes, pump will run on AC power Yes, pump will run on AC power
with depleted battery with depleted battery with depleted battery with depleted battery
Clinical advisory messages Yes Yes Yes Yes
AUDIBLE ALARM
Library size 9,000 drugs, 750 solutions 9,000 drugs, 750 solutions 9,000 drugs, 750 solutions NA
Autoprogramming No No Yes NA
Log-analysis software DoseTrac with log analysis DoseTrac with Analytic Services DoseTrac Analytic Services with NA
with RealTime views RealTime views
DATA PORT Nurse call interface, Ethernet Nurse call interface, Ethernet Nurse call interface, Ethernet MFC plug
(configuration and download) (configuration and download), (configuration and download),
wireless COM ports wireless COM ports
Events stored Settings, alarms, system errors, Settings, alarms, system errors, Settings, alarms, system errors, NA
all changes, drug menu, dose all changes, drug menu, dose all changes, drug menu, dose
limit warning, all scanned limit warning, all scanned limit warning, all scanned
information information information
POWER SOURCE
Line power, VAC (Hz) 120-240 (50/60) 120-240 (50/60) 120-240 (50/60) 110-120 (50/60)
H x W x D, cm (in) 11.4 x 30.5 x 22.2 (4.5 x 12 x 8.7) 11.4 x 30.5 x 22.2 (4.5 x 12 x 8.7) 11.4 x 30.5 x 22.2 (4.5 x 12 x 8.7) 24 x 14 x 20 (9.4 x 5.5 x 7.8)
PURCHASE INFORMATION
List price $3,500 $4,000 $4,500 $2,895
Warranty 1 year 1 year 1 year 1 year
UMDNS CODE(S) 27889, 28057 27889, 28057 27889, 28057 27889, 28057
LAST UPDATED November 2017 November 2017 November 2017 November 2017
Supplier Footnotes
Model Footnotes
Data Footnotes
Manufacturer Baxter Healthcare Corp Baxter Healthcare Corp BD BD
Medication Delivery Medication Delivery Alaris GP Plus Alaris Pump Module
SIGMA Spectrum Version 8 Spectrum IQ
WHERE MARKETED Canada, Puerto Rico, USA USA Asia Pacific, Canada, Europe, Worldwide
Latin America
FDA CLEARANCE Yes Yes No Yes
CE MARK (MDD) No No Yes Yes
CONFIGURATION
Number of channels 1 1 1 ≤4
DISPLAY
Data displayed Care area, drug name, dose rate, Care area, drug name, dose rate, Infusion status, drug name, Infusion status, drug name, dose,
rate (mL/hr), time remaining, rate (mL/hr), time remaining, profile name, primary or concentration, primary or
audio level indicator, volume audio level indicator, volume secondary, infusion rate, dose secondary, infusion rate, VTBI,
remaining, indicator for primary or remaining, indicator for primary or rate, VTBI, volume infused, time patient weight (if used), volume
secondary, alarms, network secondary, alarms, network remaining, downstream occlusion infused, profile name, dataset
status, battery level status, battery level name, channel indicator, patient
ID, dynamic pressure display,
alarm information
PUMP CAPABILITIES
Flow range, mL/hr 0.5-999 0.5-999 0.1-1,200 0.1-999
Increments, mL 0.1 (0.5-99.9 mL/hr), 1 (>99.9 0.1 (0.5-99.9 mL/hr), 1 (>99.9 0.1 (0.1-99.9 mL/hr), 1 (100-999 0.1 (0.1-99.9 mL/hr), 1 (10-999
mL/hr) mL/hr) mL/hr), 10 (1,000-1,200 mL/hr) mL/hr)
KVO rate, mL/hr Defined in drug library Defined in drug library; 1 default 0.1-20 0.1-20 (0.1 mL increments)
MRI conditional No No No No
DATA PORT RS232, IrDA IrDA RS232, IrDA RS232 (RJ45), wireless
Events stored Parameter settings, alarms, Time stamp, system errors, drug All All, including Guardrails alerts
power source, time stamp, IV set limit violations, others with subsequent programming
events, pump events, drug errors,
others
POWER SOURCE
Line power, VAC (Hz) 100-240 (50/60) 100-240 (50/60) 100-230 (50/60) 100-240 (50/60)
H x W x D, cm (in) 14.7 x 10.6 x 6.4 (5.8 x 4.2 x 2.5) 19.1 x 19.7 x 14 (7.5 x 7.8 x 5.5) 22.5 x 14.8 x 14.8 (8.8 x 5.8 x 22.6 x 8.4 x 14 (8.9 x 3.3 x 5.5)
5.8) pump module; 22.4 x 17.5 x 22.9
(8.8 x 6.9 x 9) PC unit
WEIGHT, kg (lb) 0.95 (2.1) 1.5 (3.2) 2.5 (5.5) 1.2 (2.6) pump module; 3.3 (7.2)
PC unit
PURCHASE INFORMATION
List price $3,200 Not specified Not specified $3,000
Warranty 1 year Not specified 2 years 1 year
UMDNS CODE(S) 27889, 28057 13215, 27889, 28057 27889, 28057 17634, 28057
LAST UPDATED December 2017 August 2018 December 2017 December 2017
Supplier Footnotes
Model Footnotes <1>Model 8100. Formerly
marketed as Medley Medication
System.
Data Footnotes
Manufacturer BD CODAN ARGUS AG CODAN ARGUS AG Daiwha Corp Ltd
Alaris VP Plus ARGUS 717 V ARGUS 718 V Medifusion DI-2000
WHERE MARKETED Canada, Europe, South America Worldwide, except Canada and Worldwide, except Canada and Worldwide, with exceptions
USA USA
FDA CLEARANCE No No No No
CE MARK (MDD) Yes Yes Yes Yes
CONFIGURATION
Number of channels 1 1 1 1
DISPLAY
Data displayed Infusion status, drug name, Infusion rate, infused volume, Infusion rate, infused volume, Infusion rate, infusion volume,
profile name, primary or VTBI, infusion time, remaining VTBI, infusion time, remaining time
secondary, infusion rate, dose time, remaining battery capacity, time, remaining battery capacity,
rate, VTBI, volume infused, time increasing pressure level, text increasing pressure level, text
remaining, line pressure, and symbol for alarm and pre- and symbol for alarm and pre-
downstream occlusion alarm situations, medication set- alarm situations, medication set-
up, other up, other
PUMP CAPABILITIES
Flow range, mL/hr 0.1-1,200 0.1-1,200 0.1-1,200 0.1-99.9, 100-1,200
Increments, mL 0.1 (0.1-99.9 mL/hr), 1 (100-999 0.1 0.1 0.1 (0.1-99.9 mL/hr), 1 (100-
mL/hr), 10 (1,000-1,200 mL/hr) 1,200 mL/hr)
Syringe delivery No No No No
MRI conditional No No No No
Pressure, psi 0.02-18.36 1.4-14.5, adjustable 1.4-14.5, adjustable 2.1-18.4 (110-950 mm Hg)
Events stored All Settings, alarms, system errors, Settings, alarms, system errors, Yes
rate changes, configuration, rate changes, configuration,
others others
POWER SOURCE
Line power, VAC (Hz) 100-230 (50/60) 115/230 (50/60) 115/230 (50/60) 100-240 (50/60)
H x W x D, cm (in) 22.5 x 14.8 x 15.8 (8.8 x 5.8 x 16 x 19 x 13 (6.3 x 7.4 x 5.1) 16 x 19 x 13 (6.3 x 7.4 x 5.1) 12 x 13 x 20.6 (4.7 x 5.1 x 8.1)
6.2)
PURCHASE INFORMATION
List price Not specified Not specified Not specified Not specified
Warranty 2 years 2 years 2 years 1 year
OTHER SPECIFICATIONS None specified. Uses standard IV sets; 4 certified Uses dedicated IV sets from None specified.
sets configurable; IV-pole, rail CODAN with patented set
mounting, or tabletop operation; integrated anti-free-flow clamp;
ARGUS 60 and 100 docking IV-pole, rail mounting, or tabletop
station compatible; LCD-display operation; ARGUS 60 and 100
for easy access to pump docking station compatible; LCD-
information, menu- and sub-menu display for easy access to pump
format, bar graph indicates line information, menu- and sub-menu
pressure; auto pressure release format, bar graph indicates line
on occlusion alarm; auto rate pressure; auto pressure release
calculation; 20 VDC supply; on occlusion alarm; auto rate
selectable options for customized calculation; 20 VDC supply;
operation; remote selectable options for customized
monitoring/computer control; operation; remote
manual/auto bolus; neonatal monitoring/computer control;
mode; flash memory for fast manual/auto bolus; neonatal
firmware updates; Windows- mode; flash memory for fast
based ARGUSservice tool; firmware updates; Windows-
continuous software upgrades. based ARGUSservice tool;
continuous software upgrades.
UMDNS CODE(S) 27889, 28057 27889, 28057 27889, 28057 27889, 28057
LAST UPDATED December 2017 January 2018<1> January 2018<1> January 2018<1>
Supplier Footnotes
Model Footnotes
Data Footnotes <1>Specifications updated using <1>Specifications updated using <1>Specifications for this model
manufacturer's website. manufacturer's website. have been obtained from
manufacturer's website. As a
reference for our readers, we are
including these preliminary
specifications.
Manufacturer Daiwha Corp Ltd Fresenius Kabi AG Fresenius Kabi AG Fresenius Kabi AG
Medifusion DI-2200 Agilia VP Agilia VP MC WiFi Module MVP MS
WHERE MARKETED Worldwide, with exceptions Worldwide, except North America Worldwide, except North America Worldwide, except North America
FDA CLEARANCE No No No No
CE MARK (MDD) Yes Yes Yes Yes
CONFIGURATION
Number of channels 2 1-8 1-8 1-8
DISPLAY
Data displayed Infusion rate, infusion volume, Volumetric rate, volume infused, Volumetric rate, dose rate, Rate, volume infused, VTBI,
time VTBI, pressure, drug name, volume infused, VTBI, pressure, pressure, drug name, alarm
alarm message, battery charge drug name, alarm message, message, battery charge level
level, user prompt, data log, ward battery charge level, user prompt,
name data log, ward name
PUMP CAPABILITIES
Flow range, mL/hr 0.1-1,200 0.1-1,200 0.1-1,500 0.1-1,000
Increments, mL 0.1 (0.1-99.9 mL/hr), 1 (100- 0.1 0.1 0.1 in micro mode,1 in normal
1,200 mL/hr) mode
Accuracy, % 5 5 5 5
MRI conditional No With MRI Guard Agilia With MRI Guard Agilia No
Autoprogramming NA No No No
DATA PORT USB USB, RS232, IrDA USB, RS232, IrDA RS232
Events stored Yes Settings alarms, system errors, Settings alarms, system errors, Settings alarms, system errors,
keys pressed keys pressed keys pressed
POWER SOURCE
Line power, VAC (Hz) 100-240 (50/60) 100-240 (50/60) 100-240 (50/60) 230 (50/60)
Recharge time, hr 10 6 6 16
H x W x D, cm (in) 12 x 21.5 x 20.6 (4.7 x 8.5 x 8.1) 14.5 x 13 x 13.5 (5.7 x 5.1 x 5.3) 14.5 x 13 x 13.5 (5.7 x 5.1 x 5.3) 10.5 x 31.5 x 13 (4.1 x 12.4 x 5.1)
PURCHASE INFORMATION
List price Not specified Not specified Not specified Not specified
Warranty 1 year 2 years 2 years 2 years
OTHER SPECIFICATIONS None specified. Occlusion check system; Occlusion check system; Occlusion check system;
automatic volume/time automatic volume/time volume/time function; antibolus at
calculation; antibolus at occlusion calculation; antibolus at occlusion occlusion release; pressure-
release; pressure-increase release; pressure-increase increase warning; line-
warning; line-disconnection warning; line-disconnection disconnection warning; end-of-
warning; end-of-infusion warning; end-of-infusion infusion prealarm; bolus function;
prealarm; dose rate function, prealarm; dose rate function, macro/micro; ramp up/ramp
dose time function, drop/min dose time function, drop/min down; sequential; induction
function; bolus function; function; bolus function; loading dose; drug library.
macro/micro; ramp up/ramp macro/micro; ramp up/ramp
down; sequential; induction down; sequential; induction
loading dose; drug library; loading dose; drug library;
priming function; night mode; priming function; night mode;
extended battery life mode. extended battery life mode.
UMDNS CODE(S) 17634, 28057 17634, 28057, 28063, 27889 17634, 28057, 28063, 27889 17634, 28057, 27889
LAST UPDATED January 2018<1> January 2018 January 2018 January 2018
Supplier Footnotes
Model Footnotes
DISPLAY
Data displayed Volumetric rate, dose rate, Program dependent Program dependent Battery level, wireless strength,
volume infused, VTBI, pressure, channel number, time; basic
drug name, alarm message, mode: mL/hr, VTBI, VI; DERS:
battery charge level, user prompt, drug name, dose, concentration,
data log, ward name rate, infusion time remaining,
VTBI, VI, bolus; optional: SpO2%,
BPM, PI graph
PUMP CAPABILITIES
Flow range, mL/hr 0.1-1,500 0.1 to 999 0.1 to 999 0.1-1,400
Increments, mL 0.1 in micro mode,1 in normal 0.1 (0.1-99.9 mL/hr), 1 (100-999 0.1 (0.1-99.9 mL/hr), 1 (100-999 0.1 (0.1-99.9mL/hr), 1 (100-1,400
mode mL/hr) mL/hr) mL/hr)
KVO rate, mL/hr 3 1, or the last delivery rate on the 1 or continue current rate Adjustable, 0-5
associated line (whichever is
less)
Accuracy, % 5 5 (1-999 mL/hr), 10 (0.1-0.9 5 (1-1-999 mL/hr), 10 (0.1-0.9 5 (1-1,400 mL/hr), 10 (0.1-0.9
mL/hr) mL/hr) mL/hr)
VTBI, mL 1-9,999 0.1-9,999 0.1-9,999 0.1-999
Events stored Settings alarms, system errors, Settings, alarms, alerts, system Settings, alarms, alerts, system Memory retains each operating
keys pressed errors, hard and soft limits errors, hard and soft limits step and alarm
POWER SOURCE
Line power, VAC (Hz) 100-240 (50/60) 120 (50/60), 50 VA 120 V (50/60), 50 VA 100-240 (50/60)
Battery Lithium ion Internal sealed lead-acid Internal sealed lead-acid Rechargeable lithium polymer
rechargeable 6 V rechargeable 6 V pack, 14.8 V @ 5.8 Ah
Life, hr @ flow (mL/hr) >8 @ 125 >6 @ 125 3 @ 125, or delivers 250 mL total >12 @ 125; 4 @ 999
volume if pumping at a rate of
≥126 mL/hr
Recharge time, hr 6 ≤8 hours operating at 125 mL/hr ~6 hours with the device <9 to 95%
on one line operating at 125 mL/hr on one
line
H x W x D, cm (in) 14.5 x 13 x 13.5 (5.7 x 5.1 x 5.3) 20 x 20 x 15 (8 x 8 x 6) 20.3 x 20.3 x 15.2 (8 x 8 x 6) 15.2 x 20.3 x 22.8 (6 x 8 x 9)
WEIGHT, kg (lb) 2 (4.4) 4.5 (10) with battery 4.3 (9.5) 4.5 (9.9), 5.2 (11.4) with battery
PURCHASE INFORMATION
List price Not specified $5,500 $5,095 $18,900<1>
Warranty 2 years 1 year 1 year 1 year, 1-3 years extended
available
Year first sold 2013 2015 2000 2009
Fiscal year January to December January to December January to December January to December
OTHER SPECIFICATIONS Occlusion check system; Customizable, hospital-specific Customizable, hospital-specific Optional wireless remote for
automatic volume/time drug library; Hospira MedNet drug library; Hospira MedNet monitoring and titrating
calculation; antibolus at occlusion software provides hospital- software provides hospital- medications from the MRI control
release; pressure-increase defined best practice guidance defined best practice guidance room, DERS, sidecar; optional
warning; line-disconnection and safety rule sets supporting a and safety rule sets supporting a SpO2 monitoring available
warning; end-of-infusion hospital's drug delivery and hospital's drug delivery and utilizing Masimo technology and
prealarm; dose rate function, standardization of practices; standardization of practices; fiber optic SpO2 cable; world's
dose time function, drop/min enables delivery of concurrent enables delivery of concurrent only non-magnetic MRI infusion
function; bolus function; secondary infusion without secondary infusion without pump; Smart Pump Technology,
macro/micro; ramp up/ramp changing head height of primary changing head height of primary 0.2 to 3 T magnets, delivery via
down; sequential; induction container; enables automated container; enables automated bag, bottle or syringe, 12 battery
loading dose; drug library; backpriming to remove backpriming to remove at 125 mL/hr, optional remote
priming function; night mode; accumulated air without accumulated air without control for pump observation and
extended battery life mode. disconnecting patient line; data disconnecting patient line; data infusion titration without
transfer between MedNet server transfer between MedNet server interrupting the MRI scan.
and pump facilitated by a/b/g/n and pump facilitated by a/b/g/n
wireless functionality; the infuser wireless functionality.
has an intelligent alarm system
that handles more than one alarm
at a time; different indicators for
high, medium, and low priority
alarms; ICU Medical MedNet 6.21
forwards alarm messages to third
party alarm notification systems.
UMDNS CODE(S) 17634, 28057, 27889 17634, 28057 17634, 28057 17634, 28057, 28063
LAST UPDATED January 2018 December 2017 December 2017 December 2017
Supplier Footnotes
Model Footnotes
DISPLAY
Data displayed Flow status, IV set type, flow rate Flow status, IV set type, flow rate Alarm, battery symbol, dose Alarm, battery symbol, dose
setting, volume infused/volume setting, volume infused/volume concentration, drug name, flow concentration, drug name, flow
limit, alarms limit, alarms, pressure level rate, IV set brand, pressure, rate, IV set brand, pressure,
VTBI, volume infused, remaining VTBI, volume infused, remaining
infusion time, current infusion infusion time, network connection
mode, bed number, network status, relay sequence, screen
connection status, relay lock status
sequence, screen lock status
PUMP CAPABILITIES
Flow range, mL/hr 1-450 1-999 0.1-2,000 0.1-1,200
Increments, mL 1 0.1 0.01 (0.1-99.99 mL/hr), 0.1 (100- 0.01 (0.1-99.99 mL/hr), 0.1 (100-
999.9 mL/hr), 1 (1,000-2,000 999.9 mL/hr), 1 (1,000-1,200
mL/hr) mL/hr)
KVO rate, mL/hr 1 1 0.1-5 0.1-5
Syringe delivery No No No No
MRI conditional No No No No
POWER SOURCE
Line power, VAC (Hz) 85-264 (50/60) 85-264 (50/60) 100-240 (50/60), DC 12 V, 1 A 100-240 (50/60), DC 12 V, 1 A
Recharge time, hr 30 30 6 10
H x W x D, cm (in) 21 x 10.8 x 14.8 (8.3 x 4.3 x 5.8) 21 x 10.8 x 14.8 (8.3 x 4.3 x 5.8) 7.5 x 21.4 x 14.2 (2.9 x 8.4 x 5.6) 7.4 x 20.2 x 13.3 (2.9 x 7.9 x 5.2)
WEIGHT, kg (lb) 2.3 (5.1) 2.3 (5.1) 1.6 (3.5) 1.2 (2.6)
PURCHASE INFORMATION
List price Not specified Not specified $650-800 $500-600
Warranty 1.5 years 1.5 years 18 or 24 months 18 or 24 months
UMDNS CODE(S) 27889, 28057 27889, 28057 17634, 28057 17634, 28057
LAST UPDATED November 2017 November 2017 January 2018 January 2018
Supplier Footnotes
Model Footnotes
Data Footnotes
Manufacturer Medcaptain Medical Medical Technology Products Medima Ltd Medima Ltd
Technology Co Ltd Inc P100 P200
SYS-6010 MTP
WHERE MARKETED Worldwide Worldwide Worldwide, except North America Worldwide, except North America
DISPLAY
Data displayed Alarm, battery symbol, dose Not specified Flow rate, bolus rate and its Flow/dose rate, bolus rate and its
concentration, drug name, flow volume, VTBI, volume, dose volume/dose, VTBI, volume/dose,
rate, IV set brand, pressure, done, ETTA, infusion pressure, dose done, ETTA, concentration,
VTBI, volume infused, remaining occlusion level, owner, battery infusion pressure, occlusion level,
infusion time, network connection status, alarms, infusion history owner, battery status, alarms,
status, screen lock status infusion history
PUMP CAPABILITIES
Flow range, mL/hr 0.1-1,200 1-499.9 0.1-1,200 0.1-1,200
Increments, mL 0.01 (0.1-99.99 mL/hr), 0.1 (100- Not specified 0.01 0.01
999.9 mL/hr), 1 (1,000-1,200
mL/hr)
KVO rate, mL/hr 0.1-5 0.5-1 0-20 0-20
Accuracy, % 5 5 5 5
Automatic piggybacking No No No No
Bolus mode Yes Not specified Yes Yes
Autodocumentation Yes NA No No
Autoprogramming Yes NA No No
DATA PORT RS485, USB No Opto isolated and RS232C Opto isolated and RS232C
Events stored 2,000 NA Infusion parameters, user activity, Infusion parameters, user activity,
alarms with time and date alarms with time and date
POWER SOURCE
Line power, VAC (Hz) 100-240 (50/60), DC 12 V, 1 A 120/220 (60) 100-240 (50/60) 100-240 (50/60)
H x W x D, cm (in) 23 x 10 x 19 (9.1 x 3.9 x 7.5) 10.2 x 10.2 x 17.8 (4 x 4 x 7) 11.2 x 27.4 x 16.1 (4.41 x 10.79 x 11.2 x 27.4 x 16.1 (4.41 x 10.79 x
6.34) 6.34)
PURCHASE INFORMATION
List price $400-450 $2,175 Not specified Not specified
Warranty 18 or 24 months 1 year 2 years 2 years
UMDNS CODE(S) 17634, 27889, 28057 27889, 28057 27889, 28057 27889, 28057
LAST UPDATED January 2018 January 2018 December 2017 December 2017
Supplier Footnotes
Model Footnotes
Data Footnotes
Manufacturer Medima Ltd Mindray Mindray Mindray
P300 BeneFusion VP1 BeneFusion VP3 BeneFusion VP5
WHERE MARKETED Worldwide, except North America Worldwide, except Canada and Worldwide, except Canada and Worldwide, except Canada and
USA USA USA
FDA CLEARANCE No No No No
CE MARK (MDD) Yes Yes Yes Yes
CONFIGURATION
Number of channels 1 1 1 1
Max units per pole 8 Depends on pole Depends on pole Depends on pole
DISPLAY
Data displayed Flow/dose rate, rate limits, bolus Alarms, battery capacity, current Alarms, battery capacity, current Alarms, battery capacity, current
rate and its volume/dose, VTBI, infusion, drug name, flow rate, IV infusion, drug name, flow rate, IV infusion, drug name, flow rate, IV
volume/dose, dose done, ETTA, set brand, pressure limit, set brand, pressure limit, set brand, pressure limit,
infusion pressure, occlusion level, remaining time, total volume, remaining time, total volume, remaining time, total volume,
drug name, concentration, owner VTBI VTBI VTBI
or CCA name, battery status,
alarms, infusion history
PUMP CAPABILITIES
Flow range, mL/hr 0.1-1,200 0.1-600 0.1-1,500 0.1-2,000
Increments, mL 0.01 0.1 0.1 0.01 (0.1-99.99 mL/hr), 0.1 (100-
999.9 mL/hr), 1 (1,000-2,000
mL/hr)
KVO rate, mL/hr 0-20 0.5 0.1-5 0.1-5
Accuracy, % 5 5 5 5
Syringe delivery No No No No
MRI conditional No No No No
Pressure, psi 1.45-17.4 Low: 2.9 ±2.2 (2 kPa), medium: Low: 2.9 ±2.2 (20 kPa), medium: 1.5-18.89
10.2 ±2.2 (70 kPa), high: 17.4 10.2 ±2.2 (70 kPa), high: 17.4
±3.5 (120 kPa) ±3.5 (kPa)
Real-time display Yes Yes Yes Yes
Air in line Yes Yes Yes Yes
System malfunction Yes Yes Yes Yes
Set loaded improperly Yes No No No
Door open Yes Yes Yes Yes
Infusion complete Yes Yes Yes Yes
Low battery Yes Yes Yes Yes
Clinical advisory messages Yes Not specified Not specified Not specified
AUDIBLE ALARM
DATA PORT Opto isolated and RS232C RS232, nurse call RS232, nurse call RS232, nurse call
Events stored Infusion parameters, user activity, None Alarm, bolus, drug information, Alarms, drug information, infusion
alarms with time and date on/off, parameter changing, data, inputs and changes
silence, start/stop infusion
POWER SOURCE
Line power, VAC (Hz) 100-240 (50/60) 100-240 (50/60) 100-240 (50/60) 100-240 (50/60)
Recharge time, hr 5 ≤6 ≤6 ≤6
H x W x D, cm (in) 11.2 x 27.4 x 16.1 (4.41 x 10.79 x 25 x 9 x 15 (9.8 x 3.5 x 5.9) 25 x 9 x 15 (9.8 x 3.5 x 5.9) 8.7 x 17.4 x 24.5 (3.4 x 6.9 x 9.6)
6.34)
WEIGHT, kg (lb) 2.3 (5.1) <1.5 (3.2) <1.5 (3.2) <2.5 (5.5)
PURCHASE INFORMATION
List price Not specified Not specified Not specified Not specified
Warranty 2 years Not specified Not specified Not specified
OTHER SPECIFICATIONS Automatic IV set installation and 2.4 in LCD monochrome screen; 3 in LCD monochrome screen; 3 3 in TFT color screen; 3 basic
correct IV set installation control; general, dedicated silicone basic and 2 programmable and 3 programmable infusion
high/medium/low priority alarms; segment, and PVC IV sets; infusion modes; general, modes; general, dedicated
programmable volume/dose and dynamic pressure system. dedicated silicone segment, and silicone segment, and PVC IV
rate/time; security; MedimaNet PVC IV sets; operation guidance; sets; operation guidance;
LAN system allows review of dynamic pressure system. dynamic pressure system.
pump state, transmission of drug
libraries, firmware and pump
configuration, presents alarms,
history of infusion, patient data
and report printing (≤500 pumps
per software system).
UMDNS CODE(S) 27889, 28057 27889, 28057 27889, 28057 27889, 28057
LAST UPDATED December 2017 October 2016 October 2016 October 2016
Supplier Footnotes
Model Footnotes
Data Footnotes
Manufacturer Moog Medical Devices Group Q Core Medical Ltd Q Core Medical Ltd Samtronic Industria e
Inc Div Moog Inc Sapphire H100 SapphirePlus Comercio Ltda
AITECS 3017 ICATU
WHERE MARKETED Worldwide, except USA Chile, France, Spain, United Canada, USA Worldwide, except Canada and
Kingdom USA
FDA CLEARANCE No No Yes No
CE MARK (MDD) Yes Yes No Yes
CONFIGURATION
Number of channels 1 1 1 1
Max units per pole Dependent on type and stability Depends on hospital Depends on hospital 6
of pole
DISPLAY
Data displayed Infusion mode, drug name, Screen title (start up, running, Screen title (start up, running, Flow rate, time remaining, VTBI,
infusion rate, dose rate, volume paused), running icon, infusion paused), running icon, infusion dose, concentration, drug library,
infused, VTBI, time remaining to mode, battery status, infusion mode, battery status, infusion elapsed time
end of VTBI, selected occlusion parameters, pump settings parameters, pump settings,
alarm level, actual infusion wireless connection status
pressure, battery charge level,
infusion status, icons, other
infusion information
PUMP CAPABILITIES
Flow range, mL/hr 0.1-1,500 0.1-999 0.1-999 0.1-1,200 macro, 0.1-150 micro
Increments, mL 0.001 0.1 (0.1-100 mL/hr), 1 (100-999 0.1 (0.1-100 mL/hr), 1 (100-999 0.1
mL/hr) mL/hr)
Battery Lithium ion Rechargeable lithium ion battery Rechargeable lithium ion battery Ni-MH
7.4 V, 1,960 mA/h 7.4 V, 1,960 mA/h
Life, hr @ flow (mL/hr) 10 @ 25 24 @ 125 24 @ 125 (with Wi-Fi 5 @ 125) 5 @ 25
H x W x D, cm (in) 12 x 34.6 x 14 (4.7 x 13.6 x 5.5) 14.3 x 9.6 x 4.9 (5.6 x 3.8 x 1.9) 14.3 x 9.6 x 4.9 (5.6 x 3.8 x 1.9) 17 x 19.5 x 21.5 (6.7 x 7.7 x 8.5)
WEIGHT, kg (lb) 2.3 (5.1) 0.42 (0.9) 0.43 (1) 1.8 (4)
PURCHASE INFORMATION
List price Not specified $3,074 (€2,500) $7,000 Not specified
Warranty 1 year 1 year 1 year 1 year
UMDNS CODE(S) 27889, 28057 27889, 28057 27889, 28057 27889, 28057
LAST UPDATED April 2018 December 2017 December 2017 May 2016
Supplier Footnotes
Model Footnotes
DISPLAY
Data displayed Flow rate, time remaining, VTBI, Flow rate, time remaining, VTBI, Flow rate, time remaining, VTBI, Flow rate, time remaining, VTBI,
dose, concentration, drug library, dose, concentration, elapsed time dose, concentration, drug library, elapsed time
elapsed time elapsed time
PUMP CAPABILITIES
Flow range, mL/hr 0.1-1,200 0.1-999.9 macro, 0.1-150 micro 0.1-999.9 0.1-999.9
Increments, mL 0.1 0.1 0.1 0.1
Accuracy, % 5 5 5 5
Automatic piggybacking No No No No
Bolus mode Not specified Not specified Not specified Not specified
Syringe delivery No No No No
MRI conditional No No No No
Library size NA NA NA NA
Log-analysis software NA NA NA NA
Recharge time, hr 10 10 10 10
H x W x D, cm (in) 17 x 19.5 x 21.5 (6.7 x 7.7 x 8.5) 21 x 16 x 23 (8.3 x 6.3 x 9.1) 21 x 16 x 23 (8.3 x 6.3 x 9.1) 20 x 16 x 20 (7.9 x 6.3 x 7.9)
WEIGHT, kg (lb) 1.8 (4) 2.3 (5.1) 2.3 (5.1) 1.5 (3.3)
PURCHASE INFORMATION
List price Not specified Not specified Not specified Not specified
Warranty 1 year 1 year 1 year 1 year
UMDNS CODE(S) 27889, 28057 27889, 28057 27889, 28057 27889, 28057
LAST UPDATED May 2016 May 2016 May 2016 May 2016
Supplier Footnotes
Model Footnotes
Data Footnotes
Manufacturer Samtronic Industria e Shanghai LEIEN Medical Shenzhen Osen Technology Co Sino Medical Device
Comercio Ltda Equipment Co Ltd Ltd Technology Co Ltd
ST 550T2 Plus Enteral LINS-7 OIP-900 SN-1500H
WHERE MARKETED Worldwide, except Canada and Worldwide, except Canada and Worldwide, except Canada Worldwide
USA USA
FDA CLEARANCE No No No Not specified
CE MARK (MDD) No Yes Yes Yes
CONFIGURATION
Number of channels 1 1 1 1
DISPLAY
Data displayed Flow rate, time remaining, VTBI, Infusion rate, infused volume, Infusion rate, infused volume, Not specified
elapsed time time SpO2, NIBP, battery level
indicator
PUMP CAPABILITIES
Flow range, mL/hr 0.1-999.9 0.1-1,200 1-1,200 0.1-1,500
Increments, mL 0.1 0.1 0.1 0.1
POWER SOURCE
Line power, VAC (Hz) 110-240 (50/60) 100-240 (50/60) Not specified 110-230 (50/60 Hz)
H x W x D, cm (in) 18 x 17 x 18 (7.1 x 6.7 x 7.1) 22 x 16 x 14 (8.7 x 6.3 x 5.5) 18.8 x 19.8 x 22.8 (74 x 7.8 x 9) 14 x 30.8 x 14.4 (5.5 x 12.1 x 5.7)
WEIGHT, kg (lb) 1.4 (3.2) 2.2 (4.9) 2.5 (5.5) 2.5 (5.5)
PURCHASE INFORMATION
List price Not specified Not specified $500 Not specified
Warranty 1 year Not specified Not specified Not specified
UMDNS CODE(S) 27889, 28057 27889, 28057 27889, 28057 13215, 27889, 28057
LAST UPDATED May 2016 January 2018 December 2017 August 2018
Supplier Footnotes
Model Footnotes
Data Footnotes
Manufacturer Sino Medical Device Sino Medical Device Sino Medical Device Sino Medical Device
Technology Co Ltd Technology Co Ltd Technology Co Ltd Technology Co Ltd
SN-1500HR SN-1600V SN-1600VR SN-1800V
WHERE MARKETED Worldwide Worldwide Worldwide Worldwide
FDA CLEARANCE Not specified Not specified Not specified Not specified
CE MARK (MDD) Yes Yes Yes Yes
CONFIGURATION
Number of channels 1 1 1 1
Max units per pole Not specified Not specified Not specified Not specified
DISPLAY
Data displayed Not specified Not specified Not specified Not specified
PUMP CAPABILITIES
Flow range, mL/hr 0.1-1,500 1-1,500 1-1,500 1-1,500
Increments, mL 0.1 0.1 0.1 0.1
Automatic piggybacking Not specified Not specified Not specified Not specified
Bolus mode Not specified Not specified Not specified Not specified
Syringe delivery Not specified Not specified Not specified Not specified
MRI conditional Not specified Not specified Not specified Not specified
Needleless IV connection Not specified Not specified Not specified Not specified
ALARMS & INDICATORS
Occlusion upstream Yes Yes Yes Yes
Occlusion downstream Yes Yes Yes Yes
Detection mechanism Ultrasonic Ultrasonic Ultrasonic Ultrasonic
Pressure, psi 1.9, 9.7, 17.5 1.9-17.4 (10 levels) 1.9-17.4 (10 levels) 1.9-17.4 (10 levels)
Real-time display Not specified Not specified Not specified Not specified
Air in line Yes Yes Yes Yes
System malfunction Yes Yes Yes Yes
Set loaded improperly Not specified Not specified Not specified Not specified
Door open Yes Yes Yes Yes
Infusion complete Yes Yes Yes Yes
Low battery Yes Yes Yes Yes
Clinical advisory messages Not specified Not specified Not specified Not specified
AUDIBLE ALARM
Momentary silence Not specified Not specified Not specified Not specified
DOSE ERROR REDUCTION Not specified Not specified Not specified Not specified
SYSTEM (smart technology)
Defaults to DERS on startup Not specified Not specified Not specified Not specified
Library size Not specified Not specified Not specified Not specified
No. of care areas Not specified Not specified Not specified Not specified
No. of drug entities per Not specified Not specified Not specified Not specified
care area
Wireless connectivity Yes No Yes No
Log-analysis software Not specified Not specified Not specified Not specified
Events stored Not specified Not specified Not specified Not specified
POWER SOURCE
Line power, VAC (Hz) 110-230 (50/60 Hz) 110-240 (50/60 Hz) 110-240 (50/60 Hz) 110-240 (50/60 Hz)
Battery DC12 V, 2,300 mAH DC12 V, 2,300 mAH DC12 V, 2,300 mAH DC12 V, 2,300 mAH
Recharge time, hr Not specified Not specified Not specified Not specified
H x W x D, cm (in) 14 x 30.8 x 14.4 (5.5 x 12.1 x 5.7) 13 x 12.9 x 21.5 (5.1 x 5.1 x 8.5) 13 x 12.9 x 21.5 (5.1 x 5.1 x 8.5) 13 x 12.9 x 21.5 (5.1 x 5.1 x 8.5)
WEIGHT, kg (lb) 2.5 (5.5) 1.8 (4) 1.8 (4) 1.8 (4)
PURCHASE INFORMATION
List price Not specified Not specified Not specified Not specified
Warranty Not specified Not specified Not specified Not specified
Year first sold Not specified Not specified Not specified Not specified
Fiscal year Not specified Not specified Not specified Not specified
UMDNS CODE(S) 13215, 27889, 28057 13215, 27889, 28057 13215, 27889, 28057 13215, 27889, 28057
LAST UPDATED August 2018 August 2018 August 2018 August 2018
Supplier Footnotes
Model Footnotes
Data Footnotes
Manufacturer Sino Medical Device Sino Medical Device Sino Medical Device Smiths Medical
Technology Co Ltd Technology Co Ltd Technology Co Ltd Graseby 1200
SN-1800VR SN-2000V SN-2000VR
WHERE MARKETED Worldwide Worldwide Worldwide Worldwide, except USA
Max units per pole Not specified Not specified Not specified Not specified
DISPLAY
Data displayed Not specified Not specified Not specified Time, volume, pressure indicator,
battery indicator, Infusion rate
unit, infusion rate value, infusion
time left
PUMP CAPABILITIES
Flow range, mL/hr 1-1,500 1-1,200 1-1,200 1-1,200
Increments, mL 0.1 0.1 0.1 0.1
Accuracy, % 5 5 5 5
MRI conditional Not specified Not specified Not specified Not specified
Needleless IV connection Not specified Not specified Not specified Not specified
ALARMS & INDICATORS
Occlusion upstream Yes Yes Yes Yes
Occlusion downstream Yes Yes Yes Yes
Detection mechanism Ultrasonic Ultrasonic Ultrasonic Not specified
Pressure, psi 1.9-17.4 (10 levels) 1.9-17.4 (10 levels) 1.9-17.4 (10 levels) Not specified
Clinical advisory messages Not specified Not specified Not specified Not specified
AUDIBLE ALARM
Momentary silence Not specified Not specified Not specified Not specified
DOSE ERROR REDUCTION Not specified Not specified Not specified Not specified
SYSTEM (smart technology)
Defaults to DERS on startup Not specified Not specified Not specified Not specified
Library size Not specified Not specified Not specified Not specified
No. of care areas Not specified Not specified Not specified Not specified
No. of drug entities per Not specified Not specified Not specified Not specified
care area
Wireless connectivity Yes No Yes Not specified
Log-analysis software Not specified Not specified Not specified Not specified
Events stored Not specified Not specified Not specified Not specified
POWER SOURCE
Line power, VAC (Hz) 110-240 (50/60 Hz) 110-240 (50/60 Hz) 110-240 (50/60 Hz) 110-230, 50/60 Hz
Battery DC12 V, 2,300 mAH DC12 V, 2,300 mAH DC12 V, 2,300 mAH Lithium ion
H x W x D, cm (in) 13 x 12.9 x 21.5 (5.1 x 5.1 x 8.5) 12.5 x 12.9 x 21.5 (4.9 x 5.1 x 12.5 x 12.9 x 21.5 (4.9 x 5.1 x 12 x 17 x 28.2 (4.7 x 6.7 x 11.1)
8.5) 8.5)
PURCHASE INFORMATION
List price Not specified Not specified Not specified Not specified
Warranty Not specified Not specified Not specified Not specified
Year first sold Not specified Not specified Not specified Not specified
Fiscal year Not specified Not specified Not specified Not specified
UMDNS CODE(S) 13215, 27889, 28057 13215, 27889, 28057 13215, 27889, 28057 27889, 28057
LAST UPDATED August 2018 August 2018 August 2018 July 2018
Supplier Footnotes
Model Footnotes
Data Footnotes
Manufacturer Suzhou Uniontech Import & Suzhou Uniontech Import & Terumo Corp (Japan) Terumo Corp (Japan)
Export Co Ltd Export Co Ltd Terufusion TE-171 Terufusion TE-172
M-IP1100 M-IP1200
WHERE MARKETED Worldwide, except USA Worldwide, except USA Asia, Europe, Japan, South Asia, Europe, Japan, South
America America
FDA CLEARANCE No No No No
CE MARK (MDD) Yes Yes Yes Yes
CONFIGURATION
Number of channels 1 1 1 1
DISPLAY
Data displayed Infusion rate, infused volume, AC power connection, power, Flow rate, VTBI, other Flow rate, VTBI, other
VTBI, air in line, occlusion, over, volume, door open, tube,
AC/battery symbol, low battery, occlusion level, air in line,
error, door open, tube, occlusion occlusion level, low battery, over,
level error, infusion time, infusion rate,
VTBI, volume infused
PUMP CAPABILITIES
Flow range, mL/hr 0-3,600 0-3,600 0.1-1,200 0.1-1,200
Increments, mL 1 (1-600 mL/hr) 0.1 (0.1-99.9 mL/hr),1 (1-1,200 0.1 (0.1-99.9 mL/hr), 1 (100- 0.1 (0.1-99.9 mL/hr), 1 (100-
mL/hr) 1,200 mL/hr) 1,200 mL/hr)
KVO rate, mL/hr 6 1-8 1, <1 same as flow rate 1, <1 same as flow rate
Accuracy, % 2 2 3 3
Library size NA NA NA NA
Autodocumentation NA NA NA NA
Autoprogramming NA NA NA NA
Log-analysis software NA NA NA NA
DATA PORT RS485, USB, RJ45 RS485, USB, RJ45 No RS232C, RS485
Events stored Not specified Not specified Flow rate, VTBI at time of Flow rate, VTBI at time of
start/stop, alarm occurrence start/stop, alarm occurrence
POWER SOURCE
Line power, VAC (Hz) 100-240 (50/60); 7.4 V, 1,600 100-240 (50/60); 7.4 V, 2,400 100-240 (50) 100-240 (50)
mAh mAh
Battery Lithium Lithium Ni-Cd Ni-Cd
Recharge time, hr 10 with power on; 3 with power 10 with power on; 3 with power 15 15
off off
H x W x D, cm (in) 13 x 13 x 8 (5.1 x 5.1 x 3.1) 13.5 x 13.5 x 9 (5.3 x 5.3 x 3.5) 21.5 x 10 x 20.8 (8.5 x 3.9 x 8.2) 21.5 x 10 x 20.8 (8.5 x 3.9 x 8.2)
WEIGHT, kg (lb) 1.3 (2.9) 1.4 (3.1) 3.6 (8) 3.7 (8.2)
PURCHASE INFORMATION
List price $240-300 $260-350 $1,200 $1,200
Warranty 1 year 1 year 1 year 1 year
UMDNS CODE(S) 27889, 28057 27889, 28057 27889, 28057 27889, 28057
LAST UPDATED February 2018 February 2018 January 2018<1> January 2018<1>
Supplier Footnotes
Model Footnotes
WHERE MARKETED Asia, Europe, Japan, Middle Asia, Europe, Japan, Middle Asia, Europe, Japan, Middle Asia, Europe, Japan, Middle
East, South America East, South America East, South America East, South America
FDA CLEARANCE No No No No
CE MARK (MDD) Yes Yes Yes Yes
CONFIGURATION
Number of channels 1 1 1 1
DISPLAY
Data displayed Flow rate, VTBI, others Flow rate, VTBI, others Flow rate, VTBI, others Flow rate, VTBI, patient
information, others
PUMP CAPABILITIES
Flow range, mL/hr 0.1-999 0.1-999 0.1-1,200 0.1-1,200
Increments, mL 0.01 (0.01-10 mL/hr), 0.1 (10-100 0.01 (0.01-10 mL/hr), 0.1 (10-100 0.1 (0.1-100 mL/hr), 1 (100-1,200 0.1 (0.1-100 mL/hr), 1 (100-1,200
mL/hr), 1 (100-999 mL/hr) mL/hr), 1 (100-999 mL/hr) mL/hr) mL/hr)
KVO rate, mL/hr 3 (20 drops/mL), 1-3 (60 3 (20 drops/mL), 1-3 (60 0.1-3, <1 same as flow rate 0.1-3, <1 same as flow rate
drops/mL) drops/mL)
Syringe delivery No No No No
MRI conditional No No No No
Library size NA NA NA NA
Autodocumentation NA NA NA NA
Autoprogramming NA NA NA NA
Log-analysis software NA NA NA NA
Events stored Not specified Not specified Flow rate, VTBI at time of Flow rate, VTBI at time of
start/stop, alarm occurrence, start/stop, alarm occurrence,
other other
POWER SOURCE
Line power, VAC (Hz) 100-240 100-240 100-120, 100-240 (50/60) 100-120, 100-240 (50/60)
Recharge time, hr ≥8 ≥8 9 9
H x W x D, cm (in) 12 x 25.3 x 10.2 (4.7 x 10 x 4) 12 x 25.3 x 12.1 (4.7 x 10 x 4.8) 12 x 25.3 x 10.2 (4.7 x 10 x 4) 12 x 25.3 x 10.2 (4.7 x 10 x 4)
PURCHASE INFORMATION
List price Not specified Not specified $1,600 $1,600
Warranty Not specified Not specified 1 year 1 year
OTHER SPECIFICATIONS None specified. None specified. 4.3" full-color LCD display; flow 4.3" full-color LCD display; flow
rate/VTBI volume limit alarm; dial rate/VTBI volume limit alarm; dial
setting; setting step 100 times; setting; setting step 100 times;
shortcut call; power off alert; message function; shortcut call;
optional one-touch pole clamp; power off alert; optional one-
optional rack system; Class I touch pole clamp; optional rack
equipment and internally powered system; Class I equipment and
equipment, type CF. internally powered equipment,
type CF.
UMDNS CODE(S) 27889, 28057 27889, 28057 27889, 28057 27889, 28057
LAST UPDATED March 2019<1> March 2019<1> January 2018<1> January 2018<1>
Supplier Footnotes
Model Footnotes
Data Footnotes <1>Specifications for this model <1>Specifications for this model <1>Specifications updated using <1>Specifications updated using
have been obtained from have been obtained from manufacturer's website. manufacturer's website.
manufacturer’s website. As a manufacturer’s website. As a
reference to our readers, we are reference to our readers, we are
including these preliminary including these preliminary
specifications. specifications.
Manufacturer Terumo Corp (Japan) Zyno Medical Zyno Medical
Terufusion TE-LM800 Z-800F Z-800WF
DISPLAY
Data displayed Flow rate, patient information, Drug, rate, time, VTBI, volume Drug, rate, time, VTBI, volume
VTBI, others infused, battery strength infused, battery strength, wireless
signal strength, access point
connected
PUMP CAPABILITIES
Flow range, mL/hr 0.1-1,200 1-1,200 1-1,200
Increments, mL 0.1 (0.1-100 mL/hr), 1 (100-1,200 1 1
mL/hr)
KVO rate, mL/hr 0.1-3, <1 same as flow rate 1-5 1-5
Accuracy, % 3 5 5
Syringe delivery No No No
MRI conditional No No No
Events stored Flow rate, VTBI at time of Error codes, alarms, user keypad Error codes, alarms, user keypad
start/stop, alarm occurrence, actions, VTBI, VINF, flow rate, actions, VTBI, VINF, flow rate,
other infusion mode infusion mode
POWER SOURCE
Line power, VAC (Hz) 100-120, 100-240 (50/60) 100/240 (50/60) 100/240 (50/60)
Battery Lithium-ion 12 V 12 V
Recharge time, hr 8 5 5
H x W x D, cm (in) 12 x 25.3 x 10.2 (4.7 x 10 x 4) 21.8 x 14.4 x 13.4 (8.6 x 5.7 x 21.8 x 14.4 x 13.4 (8.6 x 5.7 x
5.3) 5.3)
PURCHASE INFORMATION
List price $1,800 $2,475 $2,899
Warranty 1 year 1 year 1 year
OTHER SPECIFICATIONS 4.3" full-color LCD display; flow Upgradable software; 45 degree Wireless pump; upgradable
rate/VTBI limit alert; link tilt mount; alarm light extension; software; 45° tilt mount; alarm
interruption alarm; dial setting; protocol feature; configurable UI; light extension; protocol feature;
shortcut call; power off alert; dose durable aluminum casing. configurable UI; durable
mode select; intermittent dose; aluminum casing; Z-800WF
multi-step dose; delayed start wireless gateway supports
dose; optional one-touch pole 802.11 b/g to enable information
clamp; optional rack system; transfer between Z-800WF
Class I equipment and internally pumps, IVSafe applications,
powered equipment, type CF. EMRs, and medication
dispensing and billing systems.