Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
PCC
5 Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in
foundation bed for footing steps, walls, brick works etc. as directed and specified
including dewatering if necessary, and curing complete (shuttering where necessary shall cum 10.000 6141.000 ₹ 61,410.00
be measured and paid separately).
In prop. 1:3: 6 (1 cement:3 coarse sand : 6 coarse agg. by volume (using mixture
machine)
6 Providing and laying 25mm thick damp proof course with cement concrete in prop
1:1.5:3 with graded stone agg. of 10mm down nominal size including providing
cum 10.000 264.000 ₹ 2,640.00
approved damp proof admixture in proportion as recommended by the manufacturer
including curing etc. complete as directed.
4
RCC
7 Providing and laying Concrete in Reinforced Cement Concrete Works using Concrete
Mixture Machine with coarse sand & 20mm down graded stone aggregate including
dewatering if necessary, and curing complete but excluding cost of form work and
reinforcement for reinforced cement concrete work (form work and reinforcement will
be measured and paid separately)
In Foundation and sub - structure including footing, columns with base, tie and plinth
beam, pile cap, raft slab, base slab, RCC walls, retaining walls, walls of septic tank,
inspection pit and the like and other works not less than 100mm thick up to Plinth Level.
cum 38.000 8404.000 ₹ 3,19,352.00
M20 or Prop. 1:1.5:3
Without using admixture, plasticiser
8 In Columns ,pillars, posts ,struts, suspended floor, roof, landing, shelf and support
,balcony ,lintel ,sillb and, beam, girder, bressumer, cantilever, staircase etc.
cum 3.800 8941.000 ₹ 33,975.80
M20 or Prop. 1:1.5:3
REINFORCEMENT
9 Supplying, fitting and fixing in position reinforcement bars upto 1st floor level,
conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening,
cleaning, cutting and bending to proper shapes and length as per details, supplying and
binding with 20G annealed black wire and placing in position with proper blocks,
supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks,
chairs, anchorage etc. and no measurements for the same is required)
From Primary Sources like TATA/ SAIL/ ESSAR/ JINDAL/ SHYAM/ RINL
Qntl 24.000 9944.000 ₹ 2,38,656.00
Super Ductile (SD) TMT reinforcement bars
FORMWORK
10 Providing formwork of ordinary timber planking of thickness not less than 25mm and
removal of the same for concrete members so as to give a rough finish including
centering, shuttering, strutting and propping etc. ,for height of propping and centering of
supporting floor to the soffit of the concrete member not exceeding 4.0M as specified for Sqm 70.000 339.000 ₹ 23,730.00
the following items:
5
11 Providing formwork of 12 mm thick Plywood Board and removal of the same for
concrete members so as to give a rough finish including centering , shuttering, strutting
and propping etc., for height of propping and centering of supporting floor to the soffit
of the concrete member not exceeding 4.0M as specified for the following items:
14 Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand)
finished with a floating coat of neat cement including rounding of junctions with floor.
Sqm 70.000 344.000 ₹ 24,080.00
20 mm thick
6
WALL & FLOOR TILES
Normal range (sizes 300mmx300mm and above)
SOLING
15 Providing soling in foundation and under floor with stone/ best quality picked jhama
brick, sand packed and laid to level and in panel after preparing the subgrade as
directed including all labour and materials and if necessary dewatering, complete. Sqm 70.000 378.000 ₹ 26,460.00
7
CHOWKATHS
20 Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and
other similar works wrought, framed and fixed in position in contact with C.C or brick
masonry wall including supplying, fitting and fixing with M.S. hold fast
(40mmx3mmx250mm) as per design embeded in cement concrete block in proportion cu.m. 2.000 77129.000 ₹ 1,54,258.00
1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and
masonry as directed and specified.
Red Pine
FLUSH DOORS
21 Providing and fixing flush door shutters solid core construction with frame of 1st class
hard wood with cross band and face veneered ply wood face panels conforming to
relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) with
Sqm 12.000 4017.000 ₹ 48,204.00
necessary wood screws.
Non-decorative type face panels and block board core
35 mm thick .
8
GLAZING WORKS
23 Providing and fixing plain frosted glass of ordinary glazing quality beded in putty and
fixed with/without wooden bidding including necessary cutting and glass to be required Sq.m. 14.000 1367.000 ₹ 19,138.00
sized(payment for woodenbead shall be made separately)
3.00mm thick.(Area of glass panes not exceeding 400Sqm)
PAINTING
24 Distempering with dry distemper of approved brand and manufacture (two coats) and of
required shade on new wall surface to give an even shade, over and including
priming coat of white primer after throughly brushing the surface free from mortar Sq.m. 300.000 126.000 ₹ 37,800.00
dropings and other foreign matter and including preparing surface even and sand
papered smooth.
RAILING
25 Prroviding and fixing M.S tube hand rail of approved size by welding etc. to steel ladder
railing, balcony railing, staircase railing and similar works, including applying priming Kg 750.000 102.000 ₹ 76,500.00
coat of approved steel primer
9
PLINTH PROTECTION
26 Plinth Protection by providing 50mm thick Cement Concrete base in prop 1:3:6 (1
cement:3 coarse sand : 6 coarse agg. of 20mm nominal size) with a layer of 10mm thick
cement plaster in prop 1:3 and finishing with a floating coat of neat cement including Sq.m. 7.000 510.000 ₹ 3,570.00
necessary levelling and preparing the subgrade complete as directed.
₹ 16,81,927.80
Misc ₹ 50,457.83
Contractor Profit 10%) ₹ 1,68,549.78
G Total ₹ 19,00,935.41
10