Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
INTRODUCTION
Congratulations on your purchasing the Radio-controlled projection
Clock with digital tuning AM/FM radio RRM968P/RRM968PU.
The unit is a multi-functional radio-controlled clock. The RRM968P
- the Central Europe model - is designed to automatically synchronize
its current time and date when brought within an approximate
1500km radius of the radio signal generated from Frankfurt,
Germany (DCF77). The RRM968PU - the UK model - will do the
same when brought within range of the radio signal MSF-60
generated from Rugby, England.
This unit featured with a projection function that allows the user to
display either (1) the Current Time with Indoor Temperature or (2)
the pre-set Alarm time with Indoor Temperature on the ceiling, wall
or other flat surface. In addition, the Alarm status will also be projected,
which is indicated by the Alarm-on icon. The image projected is in a
deep red color which is easily seen in the dark.
This unit also comes with an digital tuning PLL (Phase Lock Loop)
AM/FM radio with 16 user-preset stations (8 for AM and 8 for FM A1. 3-Line LCD Display
radio). A Radio Sleep-Timer (auto-off) function is also included. - Displays the time, date, indoor temperature and radio function
A2. [ ] Battery-low indicator - Press to increase/ decrease the values in setting modes
- Press and hold for 2 seconds to activate/ deactivate the auto-
- Displays when battery power of clock is low
reception of RF clock radio signal (When Radio is Off)
A3. [ ] Battery-low indicator
TOP VIEW
- Displays when battery power of radio is low
- Press to turn on/off the alarm function - Rotate to adjust the focus of projection
- Press to display the alarm function - Rotate to change the image 90º to the left or right
- Press and hold for 2 seconds to enter the alarm-time setting mode
C3. [PROJECTION ON ] BUTTON
- Slide to enable/disable continuous projection
(when Adapter is connected)
C4. HEADPHONE JACK
3
BACK VIEW
BATTERY INSTALLATION
This unit can be operated by batteries or AC power alone as well as
both together.
Using Battery
STRONG
WEAK
NO RECEPTION
IN PROGRESS
For best reception, place the unit away from other equipment that emit
radio frequency or microwave signals such as TVs, radios, PCs or 3. Clock with Weekday
microwave ovens. Other causes for signal interference include electrical
----------------------------------------------------------
power transmission tower and/or steel reinforced concrete construction.
-
Clock (2nd Zone-time)/Indoor Temperature
HOW TO ENABLE OR DISABLE AUTO-
RECEPTION 4. Clock with Weekday(2nd Zone-time)
----------------------------------------------------------
To disable the automatic reception of radio signal, press and hold
Calendar (2nd Zone-time)/Indoor Temperature
[VOL -] for 2 seconds. The reception icon will disappear and the
unit will stop receiving the radio signal.
To activate the signal reception again, press and hold [VOL +] for 2 SETTING THE CLOCK AND
seconds. The reception icon will appear again and start blinking to CALENDAR MANUALLY
indicate auto reception of radio signal.
When the automatic radio reception is disabled, the main unit can
be set manually. Set the Clock and Calendar by following the
DISPLAY MODES SELECTION procedures below:
1. Press and hold [MODE] for 2 seconds. The 2nd Zone-time hour
Press [MODE] in the normal display mode to scroll through the offset will start flashing.
calendar clock display modes:
2. Enter the hour-offset by using [VOL +] or [VOL -]. Press
[MODE] to confirm the entry.
1. Clock with Second
3. Follow the same procedures to set the 12/24-format, hour, minutes,
---------------------------
year, “mm:dd” or “dd:mm” calendar display format, month, day,
Calendar/Indoor Temperature display languages and hourly chime on/off mode.
4. Press [MODE] to save the changes and exit the setting mode. If
2. Clock with Weekday changes are made after the minute adjustment, the value of
--------------------------------------------- seconds will be reset and start from zero.
Calendar/Indoor Temperature 5. For the day-of-week you can select among 5 languages —English
6
using [VOL +] or [VOL -]. Press [ALARM] to confirm the each hour. You can activate or deactivate this function by setting
entry and exit the setting mode. Press [RADIO] to turn off the this in the clock and calendar setting mode (please refer to Section
radio. “SETTING THE CLOCK AND CALENDAR MANUALLY”).
When the pre-set time arrives, beep sound / radio will be turned on.
Press any key to stop the beep sound. The EL backlight and projection
Section II - Digitally-tuned PLL AM/FM
will also activate for 5 seconds. Radio
To enable/disable the alarm, press [ALARM ON/OFF ] when the
main unit is in Alarm display mode
When [SNOOZE/LIGHT] is pressed to stop the alarm sound (only HOW TO USE THE RADIO
when Beep Alarm mode is selected), the unit will re-alarm again Before you start - All radio functions can only be operated when
after 8 minutes. To disable the snooze function, press [ALARM] Radio is powered on.
or [ALARM ON/OFF ] or press and hold [SNOOZE/LIGHT] for
3 seconds when alarm goes off. To turn on the radio press [RADIO]. The radio will be turned on at
the last preset radio station and volume.
Please note that when Radio is on while Beep Alarm goes off at the
same time, the Radio will be temporarily stopped until the Beep To change the radio frequency, press [AM/FM] to select the radio
Alarm has been turned off. band. Then use [+TUNING -] to locate the desired radio frequency.
Press once and the value will advance by 1 step. Press and hold for
2 seconds to enter the Radio Channel auto-search function.
NOTE ON RADIO ALARM To change the volume, use [VOL +] or [VOL -] to increase or
decrease the volume.There are a total of 16 (0-15) - steps.
When the Radio Alarm is turned on, the Radio will be turned on for
To toggle among the programmed stations, press [STATION].
2 hours. You can intervene by setting the time period for the Sleep
function by pressing [SLEEP] or simply turn off the radio at any To turn off the radio, press [ RADIO ].
time.
AUTO-SEARCH FUNCTION
HOURLY CHIME FUNCTION
The unit is equipped with an Auto-Search function and can
automatically search for the next clear channel. To activate this
When the hourly chime function is on, the indication “ ” will function, press and hold [+TUNING -] for 2 seconds and
be displayed and a beep sound will be given out at the beginning of automatically the value of the frequency will keep increasing or
8
2. To change to view the preset alarm time instead of the current slide the [ PROJECTION ON ] switch to the “off” position
time, press [SNOOZE/LIGHT] again when projection is on. during daytime.
Projector Features
3. Adjust
Featurethe projectedEffect
image as below. Instructions Section V — Others
Adjustable Rotates the Tilt swivel projection
Projection projection 180° housing to alter the
direction of projection
BACKLIGHT
To turn on the EL backlight of the LCD Display, press [SNOOZE/
FOCUS Focuses Rotate Dial D2 to focus LIGHT] to turn it on for 5 seconds.
Knob projection projection
Additional information:
ABOUT OREGON SCIENTIFIC The product herewith complies with the requirements of the Low
Visit our website (www.oregonscientific.com) to learn more about Voltage Directive 73 / 23 / EC, the EMC Directive 89 / 336 / EC and
Oregon Scientific products such as digital cameras; MP3 players; carries the CE marking accordingly.
children's electronic learning products and games; projection clocks;
health and fitness gear; weather stations; and digital and conference
phones. The website also includes contact information for our cus-
tomer care department in case you need to reach us, as well as fre-
quently asked questions and customer downloads.
We hope you will find all the information you need on our website,
however if you'd like to contact the Oregon Scientific Customer
Care department directly, please visit www2.oregonscientific.com/ Carmelo Cubito
service/support or call 949-608-2848 in the US. For international Agrate Brianza (MI) / Italy January 2004
enquiries, please visit www2.oregonscientific.com/about/interna- EC Mandatory of Manufacturer
tional/default.asp.
EC-DECLARATION OF CONFORMITY
This product complies with the essential requirements of Article 3
of the R&TTE 1999 / 5 / EC Directive, if used as intended and the
following standards have been applied:
Electromagnetic compatibility
(Article 3.1.b of the R&TTE Directive)
Applied Standards EN 301 489-3: 2002
12
Reception icon “Antenna” is not shown Auto-reception of clock radio signal has been Enable this function by following the
disabled instructions in the User’s Manual
Displayed Temperature data is different from other (1) The measurement method is different (1) U s e t h e s a m e i n s t r u m e n t s w i t h
measuring instruments (2) The area under evaluation is different or being consideration of the tolerance of readings
influenced by climate (1) Place the 2 instruments very closely for a
time period (no less then 30 minutes),
avoiding direct light and air movements
- Clock time is not correctly set; and/or The clock radio signal is not received because: - Locate the Main Unit far from PC, mobile phone
etc and re-locate it near the window sill. Wait at
- Reception icon “Antenna” displays as “No - Electromagnetic interference exist, or the Main
least 24 hours (note: during night-time signal is
reception” Unit is located within reinforced concrete wall or
less attenuate particularly after raining)
shadowed area location
- The clock radio signal is searched at 1:00,
- Orientation of placement is not at optimum
2:00, 3:00, 9:00, 15:00, 21:00 every day
position for reception of clock radio signal
automatically
- To force the signal reception please refer to
instructions in the User’s manual
The projection LED does not go on when AC/DC Projection-On button is slid to the Off-position Slide the Projection-On button to the On-
adapter is installed position
The unit is reset when SNOOZE button is pressed Batteries are being discharged Replace with new batteries
Warning:
- For other cases not listed in the above, feel free to contact our help line
- Do not dissemble the unit. This will void the warranty
13