Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
類別 TMB4 作 成 部 門
技 術 資 料
番号 T617-09 流通交通機器事業部 設計部
承 認 検 印 担 当
取 扱 要 領 資 料 佐藤友康 松浦伸治 佐藤
型 式 GFB-800型
製品名 小型紙幣計算機
資料名 取扱説明書
GLORY
0901 000048:2001-07-01
頁 2/2
改 正 履 歴
版 数 年 月 日 主 な 内 容 担 当
初版 2001- 8- 9 宝達
P8最下部文章修正
01 2001- 9-21 佐藤
シリ-ズ機追加により全面改訂
02 2001-10-19 佐藤
GFB941追加により改訂
03 2002- 2-14 矢野
GFB830A仕様変更に伴い変更
04 2002- 5-31 矢野
・GFB836仕様変更に伴い変更(P14、P17)
05 2002-6-24 ・誤記訂正(P23)accesory削除 矢野
GFB841追加により変更(P13、P17)
06 2003-01-10 佐藤
CEマーキング規格改正による適合宣言書の変更
07 2003-07-07 矢野
CEマーキング規格改正による適合宣言書の変更
08 2005-10-26 矢野
CEマーキング規格改正による適合宣言書の変更
09 2006-06-05 矢野
10 - -
11 - -
12 - -
13 - -
14 - -
15 - -
16 - -
17 - -
GFB-800・900 series
FOREWORD
Congratulations on your selection of a GLORY Bank Note
Counting Machine. This manual has been compiled to provide
complete instructions for operating the machine.
Before starting, please read the instructions thoroughly to
familiarize yourself with all of its functions and operations of the
machine and keep this manual nearby for quick reference.
→ Three-pole plug which can be grounded to the →Don't spill drink etc. on the machine.
building ground should be used for power supply.
→For maintenance, use specified parts;
*Use the power cable attached to the machine as don't make improper maintenance.
accessories.
WARNING:
This is Class A product. In a domestic environment this product may cause radio
interface in which case the user may be required to take adequate measure.
UK 200-240V BS 1363
240V IEC 83 Type SVT or<HAR>
6A IEC 127 No. 18/3AWG
300V, 10A
Australian 200-240V AS C112
240V IEC 127 Type SVT or<HAR>
10A No. 18/3AWG
300V, 10A
North 200-240V ANSI C73-20 UL Listed
American NEMA 6-45-P Type SVT
240V IEC 83 No. 18/3AWG
15A UL 198.6 300V, 10A
Switzerland 200-240V SEV Type SVT or<HAR>
240V IEC 127 No. 18/3AWG
6A 300V, 10A
If your line voltage is 100 to 120V, use one of the following types of cable. (For 100V to 120V)
Plug Line Voltage Reference
Configuration Plug Type Selector Setting Standards Power Cord
7 ACCESSORIES
18
① ④
⑤
⑥
1
Appearance
① HOPPER ⑤ STACKER
Notes to be counted are placed in the Hopper. Counted notes are stacked in the Stacker.
2
Operation panel and display
⑯ ⑱ ⑮ ⑭ ⑪
⑬ ⑫ ⑰ ⑨ ⑩ ⑧
3
Operation panel and display ⑬ BATCH NUMBER DISPLAY
The optioned number of notes to be batched is
displayed here.
⑧ RESTART KEY
Used to start counting operation in the following ⑭ DOUBLE NOTE DETECTION LEVEL KEY
cases. This key changes the threshold for double note
a. To resume counting after an error is cleared. detection according to the degree of stain/printing
b. To clear the displayed counted number. darkness of notes to be counted.
c. To start counting when the AUTO/MNL key is ⑮ ADD KEY
set to MNL. By this key, the machine is set so that each counted
number of notes in a bundle successively set in the
⑨ TEN-KEY PAD Hopper can be added up. (add function)
This is set of numerical keys (0-9); used to input
optional batch sizes. ⑯ DD KEY
By pressing this key, the size of the first counted
note is memorized and in case a smaller or larger
⑩ BATCH KEY size note is detected, the machine will stop.
Everytime this key is pressed, one of the preset
batch amounts “10”, “20”, “25”, “50”, “100” and ⑰ COUNTING SPEED CHANGE KEY
“(infinity)” will be displayed and selected by Counting speed is selected from the four rates.
rotation on the Batch Number Display. (1800, 1500, 1000, 500 notes/min.)
⑱ AUTO/MANUAL KEY
⑪ CLEAR KEY
Start of counting operation can be set either to Auto
Pressing this key clears the displayed Batch Size. start or to Manual start.
4
HOW TO OPERATE MACHINE
2
Counting Bank Notes
Note:
When dirty notes are mixed, do not use the AUTO position as
there is a possibility that the detection function does not work
correctly.
Please set notes at the center of the Hopper. If they are
laterally shifted to the right or left greatly, there is a possibility
that correct detection cannot be assured.
5
Counting Bank Notes
6
Counting Bank Notes
7
Counting Bank Notes
* If a batch number has been set, the machine will ■What is the “ADD function”
stop when the batch number is reached. After the When counting operation for a bundle of notes
batched notes are removed from the Stacker, the placed in the Hopper is finished, the counting
next counting operation will start automatically. operation for the next bundle of notes will be
started from “0” on the Counting Number Display.
When counting operation is started in the ADD
function, the counted numbers for succeeding
bundles of notes will be added and displayed.
8
Different Denomination Detection Function
⇒ Through this function the size of the first counted note is memorized and if a note whose size is different from the
memorized value is detected, the machine will stop. (While the GFB800 series machines detect size difference
widthwise, the GFB900 series detect size difference both widthwise and lengthwise.)
NOTE:
①Notes of other denominations are detected by difference in size between various denominations by
checking the width of each note to be counted. The machine is set at the time of shipment from factory
so that it can detect the size difference 5 mm or more.
This limit of 5 mm can be reduced to 3 mm, if necessary, by contacting a Glory representative for this
modification.
②One/two is subtracted from the counted number when “dd” / “dd2” is displayed on the Batch Number
Display respectively. It is also possible to set a mode to subtract nothing from the displayed number.
③If this function is activated while the counting speed 1800 notes/min is selected, the counting speed will
be automatically changed to 1500 notes/min.
10
Counterfeit note detection function
⇒ This function makes the machine stop when it detects a suspicious note.
Pressing the detection method selection key on the ten-key pad while
“CF SET” is displayed makes the corresponding detection method
effective and the corresponding LED light up.
2. When the machine stops through this function, remove the detected
note from the Stacker and recount all the other notes in the Stacker.
NOTE
Check the removed suspected note. If it is found to be a genuine note, return it to the stacker and press
the REATART KEY to continue counting.
11
Counterfeit note detection function
Notes: The following are applicable to all the counterfeit note detection function modes (AUTO, US and EU) in the
subsequent pages.
①If the counterfeit note detection function at the speed 1500 notes/min or 500 notes/min is not
satisfactory, count notes at the speed 1000 notes/min.
②If the counterfeit note detection function is activated while the counting speed 1800 notes/min is
selected, the counting speed will be automatically changed to 1500 notes/min.
12
Counterfeit note detection function (CF AUTO MODE)
⇒ This function automatically sets the detection method by investigating the
characteristics of the first counted note. The subsequent notes from the
second note will be checked by this detection method.
When notes to be counted have different characteristics, it is not necessary
to change the setting.
(Applicable only to GFB-830, 832, 841,850, 932, 937, 941, 946, 955 and 956)
Activating the CF AUTO detection mode
1. Press the CF key to activate the counterfeit note detection function.
Then “CF SET” is displayed on the display.
Pressing the AUTO key while “CF SET” is displayed activates the
counterfeit note detection AUTO mode and the corresponding LED will
blink.
Once the first note is counted and its characteristics are known, the LED
showing the detection method will light up.
2. When the machine stops after detecting a suspicious note, remove the
detected note from the Stacker and recount all the other notes in the
Stacker.
3. Deactivating the function
Pressing the detection method selection key on the ten-key pad again
while “CF SET” is displayed makes the corresponding detection
method ineffective.
Pressing the CF key again while “CF SET” is displayed makes all the
detection methods ineffective.
NOTE
Check the removed suspected note. If it is found to be a genuine note, return
it to the stacker and press the REATART KEY to continue counting.
13
Counterfeit note detection function (CF US 100 MODE)
⇒ This function makes the machine stop when it detects a suspicious US $100 note.
(Applicable only to GFB-830, 832, 836 and 850)
2. When the machine stops after detecting a suspicious note, remove the
detected note from the Stacker and recount all the other notes in the
Stacker.
NOTE
If this mode is used for counting notes other than the US $100 notes,
erroneous detection may occur. Please use this mode only for the US
$100 notes.
14
Counterfeit note detection function (CF US 100 MODE)
⇒ This function makes the machine stop when it detects a suspicious US $100 note.
(Applicable only to GFB-830A)
Press the CF+ key to activate the counterfeit note detection function.
Then “US SET” is displayed on the display and the CF LED
automatically light up. (A dot will appear at the lower left corner on the
batch number display.)
2. When the machine stops after detecting a suspicious note, remove the
detected note from the Stacker and recount all the other notes in the
Stacker.
NOTE
If this mode is used for counting notes other than the US $100 notes,
erroneous detection may occur. Please use this mode only for the US
$100 notes.
15
Counterfeit note detection function (CF US MODE)
⇒ This function makes the machine stop when it detects a suspicious US
dollar note.
(Applicable only to GFB-932, 937, 955 and 956)
2. When the machine stops after detecting a suspicious note, remove the
detected note from the Stacker and recount all the other notes in the
Stacker.
NOTE
If this mode is used for counting notes other than the US dollar notes,
erroneous detection may occur. Please use this mode only for the US
dollar notes.
16
Counterfeit note detection function (CF EU MODE)
⇒ This function makes the machine stop when it detects a suspicious Euro note.
(Applicable only to GFB-832, 836, 841,932, 937, 941, 946, 955 and 956)
1. Press the CF key to activate the counterfeit note detection function.
Then “CF SET” is displayed on the display.
Pressing the “2” key on the ten-key pad while “CF SET” is displayed
makes “EU SET” appear on the counted number display and the CF
LED automatically light up. (A dot will appear at the lower left corner on
the batch number display.)
2. When the machine stops after detecting a suspicious note, remove the
detected note from the Stacker and recount all the other notes in the
Stacker.
NOTE
・If this mode is used for counting notes other than the Euro notes, erroneous
detection may occur. Please use this mode only for the Euro notes.
・If this mode is used by 500 notes/min, erroneous detection may occur.
Please use this mode only by 1000 or 1500 notes/min.
17
TROUBLE SHOOTING
3
⇒ When an error occurs, its corresponding error code is displayed on the Batch Number Display. Find the
cause of error by the displayed error code and remove the cause according to the following procedure.
Error Type of error Cause of error Procedure for removing the cause of error
code
1. Remove notes from in the Hopper and/or Stacker.
A note is jammed
Jam 2. Open the upper part of the Hopper and remove the
in the machine.
(EJ) jammed note(s).
CAUTION:
Before the Hopper is opened, be
sure to switch off the machine
18
Error Type of error Cause of error Procedure for removing the cause of error
code
Double note Abnormal note is mixed Check all the notes on the Hopper, then set them
(Ed) detection in the bundle of notes again. Press the RESTART key to start counting
to be counted. operation.
Half note
(EH) detection
Chained note
(EC) detection
Batch over
(Eo) stop
Incorrect Improper setting of notes Set the bundle of notes correctly.
setting of in Hopper, or no notes are
notes set in Hopper
(Hp) Sensor Auto start sensor is dirty. Switch off the machine and refer to the displayed error
cleaning code, then clean the parts indicated by the error code,
as shown in the photo on page 23 with the brush.
Note is in the Note(s) is remains in Remove the note(s) left in the Stacker.
(St) Stacker the Stacker.
Sensor Sensor(s) is dirty. Switch off the machine and refer to the displayed error
cleaning code, then clean the parts indicated by the error code,
(CL1∼CL5) as shown in the photo on page 23 with the brush.
Abnor Abnormality occurs in Switch off the machine once, then switch on it again.
(Er1∼Er8) mality the unit.
19
Error Type of error Cause of error Procedure for removing the cause of error
code
DD note(s) Different size notes Check the last note in the Stacker.
detection are mixed.
(dd)
Abnormal notes are Check all notes in the Stacker, and then set them
mixed. again.
DD note(s) Different size notes Check the last two notes in the Stacker.
detection are mixed.
(dd2)
Abnormal notes are Check all notes in the Stacker, and then set
mixed. them again.
Detection Abnormal notes are Check all notes in the Stacker, and then set
impossible mixed. them again.
(En1∼En2)
⇒ CAUTION
In case that many “dd errors” or “dd2 errors” happens, remove all notes from the Hopper and Stacker, and
make sure the condition of notes (holes, tear, folds, etc.) then align and set notes again.
Refer to the Chapter 4“Precautions for Handling of Machine”
20
Error Type of error Cause of error Procedure for removing the cause of error
code
21
PRECAUTIONS FOR HANDLING OF MACHINE
4
How to Set Bank Notes Clip
Piece of paper
⇒ Precautions related to proper setting of
bank notes to be counted
22
DAILY CLEANING OF THE MACHINE
5
⇒ Piece of paper, dust and/or trash etc. accumulated in the Hopper and/or stacker may be taken into the
machine; this may cause a malfunction of the machine. Clean the Hopper and Stacker in the same way as
above.
IR sensor (GFB900 Series only) Auto start sensor
23
6 SPECIFICATIONS
● Dimensions 275mm(W)×235mm(H)×230mm(D)
● Counting speed 1800, 1500, 1000, 500 notes/min. (Four step system)
7 ACCESSORIES
● Power cord………………………1 pc.
24