Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Procedure
You will need a PC, a Parrot serial cable and the Parrot Flash Update wizard
software.
- Click on "Next".
- Select the kind of car kit you want to update: CK3x00 series.
- Click on "Next".
- Click on "OK".
- Click on "Next".
- When the Parrot Flash Update Wizard reaches the “XPRAM downloading”, plug the car kit’s power supply.
- Wait until the Parrot Flash Update wizard completes all of the steps.
- Click on "Next".
- Click on "Finish".
- Disconnect the kit from the PC.
- Wait until your Parrot car kit reboots. This can take up to a few minutes. Do not switch off the ignition or
power of your car kit in the mean time
You will need a PC, a Bluetooth Dongle and the Parrot Flash Update wizard.
In order to update your kit, please follow these steps:
- Select the kind of car kit you want to update: CK3x00 series.
- Click on "Next".
- Click on "Download Latest Version".
- Wait until the following window appears:
- Click on "OK".
- If you need to disconnect your PC from the Internet in order to get into your vehicle, you can find the binary
files you have downloaded on your hard disk by following the path C:\Program Files\Parrot Flash Update
Wizard\Internet Files path.
- Find the Parrot car kit with the Bluetooth manager that is provided with the Bluetooth Dongle’s software.
- Click on your Parrot car kit.
- Click on "Next".
- Enter the PASSKEY 1234.
- Click on "Next".
- The serial port by the Bluetooth dongle software is now active. Please write down the outgoing COM port
number that the Bluetooth manager gives you on your computer. (In this example the active serial port is
number 10.)
- Select the kind of car kit you want to update: CK3x00 series.
- Click on "Next".
- Click on "Browse" and reload the binary files you have downloaded on your hard disk by following the
C:\Program Files\Parrot Flash Update Wizard\Internet Files path.
- Click on "Next".
- Wait until the Parrot Flash Update wizard completes all of the steps.
- Click on "Next".
- Click on "Finish".
- Wait until your Parrot car kit reboots. This can take up to a few minutes. Do not switch off the ignition or
power your car kit in the mean time and do not remove the Dongle.
You will need a PC, a Bluetooth Dongle and the Parrot Flash Update wizard.
You can do it by this way only if you have Windows XP with the Service Pack
2. Please make sure that the Bluetooth Dongle’s drivers are not installed. If
needed uninstalled them.
- Select the kind of car kit you want to update: CK3x00 series.
- Click on "Next"
- Click on "Download Latest Version".
- Wait until the following window appears:
- If you need to disconnect your PC from the Internet in order to get into your vehicle, you can find the binary
files you have downloaded on your hard disk by following the path C:\Program Files\Parrot Flash Update
Wizard\Internet Files.
- Click on "Next".
- Select "Bluetooth connection".
- Click on "Next".
- Wait until the Parrot Flash Update wizard completes all of the steps.
- Click on "Next".
- Click on "Finish".
- Wait until your Parrot car kit reboots. This can take up to a few minutes. Do not switch off the ignition or
power off your car kit in the mean time and do not remove the Dongle.