Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
ASOPROPIMOPLA
MONTE PLATA, REPUBLICA DOMINICANA, MAYO 2018
A SOLICITUD DE:
DISEÑADO POR:
CODIA 23759
ING. VICTOR MANUEL VALDEZ MARTINEZ
CALCULOS ESTRUCTURALES, PRESUPUESTOS Y SUPERVISION DE PROYECTOS
victorvaldez@hotmail.es, vicmanuelvaldez@gmail.com Cel.: 829-564-5465, 829-629-4719 y Tel.:809-537-6253
CALCULOS ESTRUCTURALES, PLANTA EMPACADORA DE PIÑA
ASOPROPIMOPLA
MONTE PLATA, REPUBLICA DOMINICANA, MAYO 2018
Dicha edificación será destinada para uso de ocupación normal, empacar alimentos.
Posee 1 nivel de altura con un mezzanine +8.15m sobre su nivel de piso, en su punto
más alto. El sistema estructural principal consta de un pórtico (vigas y columnas)
metálicos en vigas H, pedestales de hormigón armado y muros de mampostería, losas
compuestas en metaldeck, concreto armado y aluzinc, capaces de resistir las
solicitaciones por cargas gravitacionales, vientos y sismicas.
EL OBJETIVO
Poder determinar si la edificación y el sistema elegido por quien diseña, proporcionan la
estabilidad y seguridad ante las solicitación de servicio (Cargas gravitacionales), sismos
y vientos.
Revisar los datos obtenidos y compararlo con las normas y reglamentos que exige el
Ministerio de Obras Públicas y Comunicaciones, y verificar que cumplan con las
solicitaciones mínimas para este tipo de estructuras.
ESPECIFICACIONES GENERALES
A continuación se presentan las especificaciones técnicas utilizadas en el análisis y
diseño del edificio:
Códigos y reglamentos:
American Concrete Institute ACI 318-14
Reglamento para Diseño y Construcción de Edificios en Mampostería
Estructural R-027
International Building Code IBC-2000
Reglamento para Diseño y Construcción de estructuras en Hormigón Armado R-
033
American Society of Civil Engineers ASCE 7-05
Manual of Steel Construction AISC LRFD 3RA Edition 2001
Reglamento para Diseño, Fabricación y Montaje en Estructuras de Acero R-028
CONSIDERACIONES DE DISEÑO
Para el diseño estructural se consideraron las solicitaciones laterales del sismo y
vientos, las solicitaciones estáticas gravitatorias del peso muerto y muerto
adicional de la superestructura en conjunto con las cargas vivas asignadas.
También fueron verificados las deflexiones L/180 para las cargas gravitatorias
muertas + vivas.
Softwares utilizados
Los programas utilizados para el análisis y diseño de la estructura fueron los
siguientes:
Consideraciones de Suelo
Para el diseño de la estructura se tomaron los siguientes datos:
CARGAS UTILIZADAS
Cargas laterales
Para este, se utilizó la metodología del ASCE 7-98, con las siguientes consideraciones:
Cargas gravitatorias
Cargas Sísmicas
ESPECTRO DE DISEÑO
1.800
1.600
1.400
1.200
1.000
ESPECTRO DE DISEÑO
0.800
0.600
0.400
0.200
0.000
SOLICITACIONES SISMICAS.
Datos:
L= 14.00 mt.
H= 6.40 mt.
L/2= 7.00 mt.
Corona= 2.00 mt.
Z= 1.00 Angulo= 0.29
U= 1.10 θ= 15.945
K= 1.00
C= 1.20
V= 180 Km/h
* Intencidad
A= 89.60 M²
*Fuerza resultante
0.8P= 1155.00
Px(1.2sen<-0.4)= -95.35
0.4P= 577.50
Design Preferences
Page 2
®
ETABS v9.7.4 Steel Frame Design Design Input
AISC-LRFD99 Units: Kgf-cm
Load Combinations
Load Combinations
Combination Combination
Name Definition
COMB1 1.400*DEAD
COMB2 1.200*DEAD + 1.600*LIVE
COMB3 1.200*DEAD + 1.000*LIVE + 1.600*VIENTO
COMB4 1.200*DEAD + 1.000*LIVE – 1.600*VIENTO
COMB5 1.200*DEAD + 0.800*VIENTO
COMB6 1.200*DEAD – 0.800*VIENTO
COMB7 0.900*DEAD + 1.600*VIENTO
COMB8 0.900*DEAD – 1.600*VIENTO
COMB9 0.260*DEAD + 1.000*SPECX
COMB10 0.260*DEAD + 1.000*SPECY
COMB11 1.200*DEAD + 1.000*LIVE + 1.000*COMB9
COMB12 1.200*DEAD + 1.000*LIVE + 1.000*COMB10
COMB13 1.200*DEAD + 1.000*LIVE – 1.000*COMB9
COMB14 1.200*DEAD + 1.000*LIVE – 1.000*COMB10
COMB15 0.900*DEAD + 1.000*COMB9
COMB16 0.900*DEAD + 1.000*COMB10
COMB17 0.900*DEAD – 1.000*COMB9
COMB18 0.900*DEAD – 1.000*COMB10
DSTLD1 1.000*DEAD
DSTLD2 1.000*DEAD + 1.000*LIVE
Page 3
®
ETABS v9.7.4 Steel Frame Design Design Input
AISC-LRFD99 Units: Kgf-cm
Page 4
®
ETABS v9.7.4 Steel Frame Design Design Input
AISC-LRFD99 Units: Kgf-cm
Page 5
®
ETABS v9.7.4 Steel Frame Design Design Input
AISC-LRFD99 Units: Kgf-cm
Page 6
®
ETABS v9.7.4 Steel Frame Design Design Input
AISC-LRFD99 Units: Kgf-cm
Page 7
®
ETABS v9.7.4 Steel Frame Design Design Input
AISC-LRFD99 Units: Kgf-cm
Page 8
®
ETABS v9.7.4 Steel Frame Design Design Input
AISC-LRFD99 Units: Kgf-cm
Page 9
®
ETABS v9.7.4 Steel Frame Design Design Input
AISC-LRFD99 Units: Kgf-cm
Page 10
®
ETABS v9.7.4 Steel Frame Design Design Input
AISC-LRFD99 Units: Kgf-cm
Page 11
®
ETABS v9.7.4 Steel Frame Design Design Input
AISC-LRFD99 Units: Kgf-cm
Page 12
®
ETABS v9.7.4 Steel Frame Design Design Input
AISC-LRFD99 Units: Kgf-cm
Page 13
®
ETABS v9.7.4 Steel Frame Design Design Input
AISC-LRFD99 Units: Kgf-cm
Page 14
®
ETABS v9.7.4 Steel Frame Design Design Summary Output
AISC-LRFD99 Units: Kgf-cm
Page 15
®
ETABS v9.7.4 Steel Frame Design Design Summary Output
AISC-LRFD99 Units: Kgf-cm
Page 16
®
ETABS v9.7.4 Steel Frame Design Design Summary Output
AISC-LRFD99 Units: Kgf-cm
Page 17
®
ETABS v9.7.4 Steel Frame Design Design Summary Output
AISC-LRFD99 Units: Kgf-cm
Page 18
®
ETABS v9.7.4 Steel Frame Design Design Summary Output
AISC-LRFD99 Units: Kgf-cm
Page 19
®
ETABS v9.7.4 Steel Frame Design Design Summary Output
AISC-LRFD99 Units: Kgf-cm
Page 20
®
ETABS v9.7.4 Steel Frame Design Design Summary Output
AISC-LRFD99 Units: Kgf-cm
Page 21
®
ETABS v9.7.4 Steel Frame Design Design Summary Output
AISC-LRFD99 Units: Kgf-cm
Page 22
®
ETABS v9.7.4 Steel Frame Design Design Summary Output
AISC-LRFD99 Units: Kgf-cm
Page 23
®
ETABS v9.7.4 Steel Frame Design Design Summary Output
AISC-LRFD99 Units: Kgf-cm
Page 24
®
ETABS v9.7.4 Concrete Frame Design Design Preferences
ACI 318-08/IBC 2009 Units: Kgf-cm
Design Preferences
Page 2
®
ETABS v9.7.4 Concrete Frame Design Design Input
ACI 318-08/IBC 2009 Units: Kgf-cm
Load Combinations
Load Combinations
Combination Combination
Name Definition
COMB1 1.400*DEAD
COMB2 1.200*DEAD + 1.600*LIVE
COMB3 1.200*DEAD + 1.000*LIVE + 1.600*VIENTO
COMB4 1.200*DEAD + 1.000*LIVE – 1.600*VIENTO
COMB5 1.200*DEAD + 0.800*VIENTO
COMB6 1.200*DEAD – 0.800*VIENTO
COMB7 0.900*DEAD + 1.600*VIENTO
COMB8 0.900*DEAD – 1.600*VIENTO
COMB9 0.260*DEAD + 1.000*SPECX
COMB10 0.260*DEAD + 1.000*SPECY
COMB11 1.200*DEAD + 1.000*LIVE + 1.000*COMB9
COMB12 1.200*DEAD + 1.000*LIVE + 1.000*COMB10
COMB13 1.200*DEAD + 1.000*LIVE – 1.000*COMB9
COMB14 1.200*DEAD + 1.000*LIVE – 1.000*COMB10
COMB15 0.900*DEAD + 1.000*COMB9
COMB16 0.900*DEAD + 1.000*COMB10
COMB17 0.900*DEAD – 1.000*COMB9
COMB18 0.900*DEAD – 1.000*COMB10
Page 3
®
ETABS v9.7.4 Concrete Frame Design Design Input
ACI 318-08/IBC 2009 Units: Kgf-cm
Page 4
®
ETABS v9.7.4 Concrete Frame Design Design Summary Output
ACI 318-08/IBC 2009 Units: Kgf-cm
Page 5
®
ETABS v9.7.4 Concrete Frame Design Design Summary Output
ACI 318-08/IBC 2009 Units: Kgf-cm
Concrete Column Joint Design - Beam to Column D/C Ratios & Joint Shear Check
Concrete Column Joint Design - Beam to Column D/C Ratios & Joint Shear Check
Story Column Section (6/5)Beam-Column (6/5)Beam-Column Joint Shear Joint Shear
Level Line Name Ratio Major Ratio Minor Ratio Major Ratio Minor
STORY1 C1-1 PEDESTAL
STORY1 C5-1 PEDESTAL
STORY1 C9-1 PEDESTAL
STORY1 C11-1 PEDESTAL
STORY1 C15-1 PEDESTAL
STORY1 C17-1 PEDESTAL
STORY1 C21-1 PEDESTAL
STORY1 C23-1 PEDESTAL
STORY1 C27-1 PEDESTAL
STORY1 C29-1 PEDESTAL
STORY1 C33-1 PEDESTAL
STORY1 C35-1 PEDESTAL
STORY1 C39-1 PEDESTAL
STORY1 C41-1 PEDESTAL
STORY1 C45-1 PEDESTAL
STORY1 C47-1 PEDESTAL
STORY1 C51-1 PEDESTAL
STORY1 C53-1 PEDESTAL
STORY1 C57-1 PEDESTAL
STORY1 C59-1 PEDESTAL
STORY1 C63-1 PEDESTAL
STORY1 C65-1 PEDESTAL
STORY1 C69-1 PEDESTAL
STORY1 C71-1 PEDESTAL
STORY1 C75-1 PEDESTAL
STORY1 C78-1 PEDESTAL
STORY1 C81-1 PEDESTAL
STORY1 C84-1 PEDESTAL
STORY1 C87-1 PEDESTAL
Page 6
TABLAS DE COMPACIDAD DE LOS ELEMENTOS METALICOS SOMETIDOS A CARGAS SISMICAS
ALAS ALMAS
ELEMENTO
bf/2tf ≤ 0.30√E/Fy T/tw ≤ 2.45√E/Fy
W10x22 7.986 8.515 O.k. 34.375 69.537 O.k., No Necesita Rigidizantes
W12x30 7.409 8.515 O.k. 38.942 69.537 O.k., No Necesita Rigidizantes
W10x30 5.696 8.515 O.k.
COLUMNA = W10x30
Steel connections
Results
________________________________________________________________________________________________________________________
________________________________________________________________________________
DEMANDS
Description Pu Mu22 Mu33 Vu2 Vu3 Load type
[Ton] [Ton*m] [Ton*m] [Ton] [Ton]
-----------------------------------------------------------------------------------------------------
DL -1.50 0.00 1.49 -0.40 0.00 Design
LL -1.06 0.00 1.25 -0.36 0.00 Design
W -0.87 0.00 1.48 0.40 0.00 Design
SX -0.72 0.00 -0.28 0.08 0.00 Design
SY -0.10 0.00 0.72 0.17 0.00 Design
comb1 -2.10 0.00 2.09 -0.56 0.00 Design
comb2 -3.50 0.00 3.79 -1.06 0.00 Design
comb3 -4.25 0.00 5.41 -0.20 0.00 Design
comb4 -1.47 0.00 0.67 -1.48 0.00 Design
comb5 -2.50 0.00 2.97 -0.16 0.00 Design
comb6 -1.10 0.00 0.60 -0.80 0.00 Design
comb7 -2.74 0.00 3.71 0.28 0.00 Design
comb8 0.04 0.00 -1.03 -1.00 0.00 Design
comb9 -3.58 0.00 2.76 -0.76 0.00 Design
com10 -2.14 0.00 3.32 -0.92 0.00 Design
com11 -2.96 0.00 3.76 -0.67 0.00 Design
com12 -2.76 0.00 2.32 -1.01 0.00 Design
com13 -2.07 0.00 1.06 -0.28 0.00 Design
com14 -0.63 0.00 1.62 -0.44 0.00 Design
com15 -1.45 0.00 2.06 -0.19 0.00 Design
com16 -1.25 0.00 0.62 -0.53 0.00 Design
-----------------------------------------------------------------------------------------------------
DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Pedestal
Axial bearing [kg/m2] 1450313.00 791086.40 comb3 0.55 DG1 3.1.1;
Base plate
Flexural yielding (bearing interface) [Ton*m/m] 3.67 3.45 comb3 0.94 DG1 Eq. 3.3.13,
DG1 Sec 3.1.2
Flexural yielding (tension interface) [Ton*m/m] 3.67 3.29 comb3 0.90 DG1 Eq. 3.3.13
Column
Weld capacity [Ton/m] 186.45 70.35 comb3 0.38 p. 8-9,
Sec. J2.5,
Sec. J2.4,
DG1 p. 35
Elastic method weld shear capacity [Ton/m] 124.30 3.28 comb4 0.03 p. 8-9,
Sec. J2.5,
Sec. J2.4
Elastic method weld axial capacity [Ton/m] 186.45 69.14 comb3 0.37 p. 8-9,
Sec. J2.5,
Sec. J2.4
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ratio 0.94
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Major axis
Anchors
GEOMETRIC CONSIDERATIONS
Dimensions Unit Value Min. value Max. value Sta. References
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Anchors
Anchor spacing [cm] 15.60 7.62 -- Sec. D.8.1
Concrete cover [cm] 8.85 5.08 -- Sec. 7.7.1
Effective length [cm] 31.72 -- 98.76
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Anchor tension [Ton] 6.60 6.24 comb3 0.94 Eq. D-3
Pullout of anchor in tension [Ton] 8.50 6.24 comb3 0.73 Sec. D.4.1.1
Side-face blowout of anchor in tension [Ton] 7.44 6.24 comb3 0.84 Sec. D.5.4.1,
Sec. D.4.1.1
Side-face blowout of group of anchors in tension [Ton] 16.77 12.47 comb3 0.74 Eq. D-17,
Sec. D.4.1.1
Group of Anchors reinforcement in tension [Ton] 35.77 17.69 comb3 0.49 Sec. D.5.2.9,
D.6.2.9
Anchor shear [Ton] 2.75 0.25 comb4 0.09 Eq. D-20,
Sec. D.6.1.3
Pryout of anchor in shear [Ton] 8.71 0.25 comb4 0.03 Eq. D-4,
Sec. D.4.1.1
Pryout of group of anchors in shear [Ton] 10.28 0.99 comb4 0.10 Eq. D-5,
Sec. D.4.1.1
Group of Anchors reinforcement in shear [Ton] 22.35 1.48 comb4 0.07 Sec. D.5.2.9,
D.6.2.9
Interaction of tensile and shear forces [Ton] 1.20 0.00 DL 0.00 Eq. D-3,
Sec. D.4.1.1,
Sec. D.5.4.1,
Eq. D-17,
Eq. D-20,
Sec. D.6.1.3,
Eq. D-4,
Eq. D-5,
Sec. D.7
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ratio 0.94
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Minor axis
Anchors
GEOMETRIC CONSIDERATIONS
Dimensions Unit Value Min. value Max. value Sta. References
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Anchors
Anchor spacing [cm] 15.60 7.62 -- Sec. D.8.1
Concrete cover [cm] 8.85 5.08 -- Sec. 7.7.1
Effective length [cm] 31.72 -- 98.76
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Anchor tension [Ton] 6.60 0.01 comb8 0.00 DG1 3.1.1
Pullout of anchor in tension [Ton] 8.50 0.01 comb8 0.00 Sec. D.4.1.1
Group of Anchors reinforcement in tension [Ton] 35.77 0.04 comb8 0.00 Sec. D.5.2.9,
D.6.2.9
Anchor shear [Ton] 2.75 0.00 DL 0.00 Eq. D-20,
Sec. D.6.1.3
Pryout of anchor in shear [Ton] 8.71 0.00 DL 0.00 Eq. D-4,
Sec. D.4.1.1
Pryout of group of anchors in shear [Ton] 16.25 0.00 comb8 0.00 Eq. D-5,
Sec. D.4.1.1
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ratio 0.00
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Major axis
Maximum compression and tension (comb3)
--------------------------------------------------------------------
Maximum bearing pressure 79.11 [kg/cm2]
Minimum bearing pressure 79.11 [kg/cm2]
Maximum anchor tension 6.24 [Ton]
Minimum anchor tension 0.00 [Ton]
Neutral axis angle 0.00
Bearing length 9.10 [cm]
--------------------------------------------------------------------
Anchors tensions
Anchor Transverse Longitudinal Shear Tension
[cm] [cm] [Ton] [Ton]
-----------------------------------------------------------------------------
1 11.19 15.60 -0.03 6.24
2 11.19 0.00 -0.03 2.61
3 11.19 -15.60 -0.03 0.00
4 -11.19 -15.60 -0.03 0.00
5 -11.19 0.00 -0.03 2.61
6 -11.19 15.60 -0.03 6.24
-----------------------------------------------------------------------------
Hewlett-Packard
Current Date: 19-May-18 2:19 PM
Units system: Metric
File name: C:\Users\Victor Valdez\Downloads\NAVE EMPACADORA DE PIÑA (ARQ. JOSE VLADIMIR PIMENTEL)\CONECCIONES NAVE
EMPACADORA DE PIÑA.cnx\
Steel connections
Results
________________________________________________________________________________________________________________________
________________________________________________________________________________
DEMANDS
Description Pu Mu22 Mu33 Vu2 Vu3 Load type
[Ton] [Ton*m] [Ton*m] [Ton] [Ton]
------------------------------------------------------------------------------------------------------
DL -5.65 0.00 -0.10 -0.58 -0.02 Design
LL -5.00 0.00 -0.16 -0.54 -0.01 Design
W -0.17 0.00 0.36 0.18 -0.01 Design
SX 0.31 -0.63 -0.11 -0.05 -0.29 Design
SY -0.89 0.02 1.50 0.66 -0.01 Design
comb1 -7.91 0.00 -0.14 -0.81 -0.03 Design
comb2 -14.78 0.00 -0.38 -1.56 -0.04 Design
comb3 -12.05 0.00 0.30 -0.95 -0.05 Design
comb4 -11.51 0.00 -0.86 -1.52 -0.02 Design
comb5 -6.92 0.00 0.17 -0.55 -0.03 Design
comb6 -6.64 0.00 -0.41 -0.84 -0.02 Design
comb7 -5.36 0.00 0.49 -0.23 -0.03 Design
comb8 -4.81 0.00 -0.67 -0.81 0.00 Design
comb9 -11.47 -0.63 -0.39 -1.29 -0.32 Design
com10 -12.09 0.63 -0.17 -1.19 0.26 Design
com11 -12.67 0.02 1.22 -0.58 -0.04 Design
com12 -10.89 -0.02 -1.78 -1.90 -0.02 Design
com13 -4.78 -0.63 -0.20 -0.57 -0.31 Design
com14 -5.40 0.63 0.02 -0.47 0.27 Design
com15 -5.98 0.02 1.41 0.14 -0.03 Design
com16 -4.20 -0.02 -1.59 -1.18 -0.01 Design
------------------------------------------------------------------------------------------------------
Ratio 0.56
DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Pedestal
Axial bearing [kg/m2] 1450313.00 265713.60 com12 0.18 DG1 3.1.1;
Base plate
Flexural yielding (bearing interface) [Ton*m/m] 2.08 1.16 com12 0.56 DG1 Eq. 3.3.13,
DG1 Sec 3.1.2
Flexural yielding (tension interface) [Ton*m/m] 2.08 0.91 SY 0.44 DG1 Eq. 3.3.13
Column
Weld capacity [Ton/m] 186.45 19.33 SY 0.10 p. 8-9,
Sec. J2.5,
Sec. J2.4,
DG1 p. 35
Elastic method weld shear capacity [Ton/m] 124.30 4.20 com12 0.03 p. 8-9,
Sec. J2.5,
Sec. J2.4
Elastic method weld axial capacity [Ton/m] 186.45 22.77 com12 0.12 p. 8-9,
Sec. J2.5,
Sec. J2.4
WARNINGS
- High value moments detected in the axis perpendicular to the design axis
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Major axis
Anchors
GEOMETRIC CONSIDERATIONS
Dimensions Unit Value Min. value Max. value Sta. References
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Anchors
DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Anchor tension [Ton] 3.86 1.71 SY 0.44 Eq. D-3
Pullout of anchor in tension [Ton] 3.45 1.71 SY 0.50 Sec. D.4.1.1
Side-face blowout of anchor in tension [Ton] 4.74 1.71 SY 0.36 Sec. D.5.4.1,
Sec. D.4.1.1
Side-face blowout of group of anchors in tension [Ton] 10.68 3.43 SY 0.32 Eq. D-17,
Sec. D.4.1.1
Group of Anchors reinforcement in tension [Ton] 107.30 4.96 SY 0.05 Sec. D.5.2.9,
D.6.2.9
Anchor shear [Ton] 1.71 0.32 com12 0.18 Eq. D-20,
Sec. D.6.1.3
Pryout of anchor in shear [Ton] 8.71 0.32 com12 0.04 Eq. D-4,
Sec. D.4.1.1
Pryout of group of anchors in shear [Ton] 11.70 1.26 com12 0.11 Eq. D-5,
Sec. D.4.1.1
Group of Anchors reinforcement in shear [Ton] 22.35 1.90 com12 0.08 Sec. D.5.2.9,
D.6.2.9
Interaction of tensile and shear forces [Ton] 1.20 0.00 LL 0.00 Eq. D-3,
Sec. D.4.1.1,
Sec. D.5.4.1,
Eq. D-17,
Eq. D-20,
Sec. D.6.1.3,
Eq. D-4,
Eq. D-5,
Sec. D.7
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ratio 0.50
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Minor axis
Anchors
GEOMETRIC CONSIDERATIONS
Dimensions Unit Value Min. value Max. value Sta. References
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Anchors
DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Anchor tension [Ton] 3.86 0.93 SX 0.24 DG1 3.1.1
Pullout of anchor in tension [Ton] 3.45 0.93 SX 0.27 Sec. D.4.1.1
Group of Anchors reinforcement in tension [Ton] 107.30 2.80 SX 0.03 Sec. D.5.2.9,
D.6.2.9
Anchor shear [Ton] 1.71 0.05 comb9 0.03 Eq. D-20,
Sec. D.6.1.3
Pryout of anchor in shear [Ton] 8.71 0.05 comb9 0.01 Eq. D-4,
Sec. D.4.1.1
Pryout of group of anchors in shear [Ton] 9.32 0.16 comb9 0.02 Eq. D-5,
Sec. D.4.1.1
Group of Anchors reinforcement in shear [Ton] 22.35 0.32 comb9 0.01 Sec. D.5.2.9,
D.6.2.9
Interaction of tensile and shear forces [Ton] 1.20 0.00 SX 0.00 Eq. D-3,
Sec. D.4.1.1,
Eq. D-20,
Sec. D.6.1.3,
Eq. D-4,
Eq. D-5,
Sec. D.7
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ratio 0.27
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Major axis
Maximum compression (com12)
--------------------------------------------------------------------
Maximum bearing pressure 26.57 [kg/cm2]
Minimum bearing pressure 26.57 [kg/cm2]
Maximum anchor tension 0.65 [Ton]
Minimum anchor tension 0.00 [Ton]
Neutral axis angle 0.00
Bearing length 15.45 [cm]
--------------------------------------------------------------------
Anchors tensions
Anchor Transverse Longitudinal Shear Tension
[cm] [cm] [Ton] [Ton]
-----------------------------------------------------------------------------
1 11.19 15.60 -0.32 0.00
2 11.19 0.00 -0.32 0.16
3 11.19 -15.60 -0.32 0.65
4 -11.19 -15.60 -0.32 0.65
5 -11.19 0.00 -0.32 0.16
6 -11.19 15.60 -0.32 0.00
-----------------------------------------------------------------------------
--------------------------------------------------------------------
Maximum bearing pressure 25.05 [kg/cm2]
Minimum bearing pressure 25.05 [kg/cm2]
Maximum anchor tension 1.71 [Ton]
Minimum anchor tension 0.00 [Ton]
Neutral axis angle 0.00
Bearing length 7.67 [cm]
--------------------------------------------------------------------
Anchors tensions
Anchor Transverse Longitudinal Shear Tension
[cm] [cm] [Ton] [Ton]
-----------------------------------------------------------------------------
1 11.19 15.60 0.11 1.71
2 11.19 0.00 0.11 0.77
3 11.19 -15.60 0.11 0.00
4 -11.19 -15.60 0.11 0.00
5 -11.19 0.00 0.11 0.77
6 -11.19 15.60 0.11 1.71
-----------------------------------------------------------------------------
Hewlett-Packard
Current Date: 19-May-18 2:22 PM
Units system: Metric
File name: C:\Users\Victor Valdez\Downloads\NAVE EMPACADORA DE PIÑA (ARQ. JOSE VLADIMIR PIMENTEL)\CONECCIONES NAVE
EMPACADORA DE PIÑA.cnx\
Steel connections
Results
________________________________________________________________________________________________________________________
________________________________________________________________________________
DEMANDS
Beam Right beam Left beam Column Panel
Description Ru Pu Mu PufTop PufBot PufTop PufBot Pu Vu Load type
[Ton] [Ton] [Ton*m] [Ton] [Ton] [Ton] [Ton] [Ton] [Ton]
---------------------------------------------------------------------------------------------------------------------------------------------------------
DL -0.52 -0.79 -1.51 5.44 -6.23 0.00 0.00 -1.50 5.83 Design
LL -0.45 -0.69 -1.27 4.56 -5.25 0.00 0.00 -1.06 4.92 Design
W -0.08 -0.64 -1.12 4.01 -4.65 0.00 0.00 -0.80 4.25 Design
SX -0.13 0.13 -0.10 0.45 -0.32 0.00 0.00 0.75 0.39 Design
SY -0.02 -0.11 -0.36 1.34 -1.45 0.00 0.00 -0.10 1.28 Design
comb1 -0.73 -1.11 -2.11 7.62 -8.72 0.00 0.00 -2.10 8.16 Design
comb2 -1.34 -2.05 -3.84 13.83 -15.88 0.00 0.00 -3.50 14.87 Design
comb3 -1.20 -2.67 -4.87 17.50 -20.17 0.00 0.00 -4.14 20.00 Design
comb4 -0.95 -0.61 -1.29 4.68 -5.29 0.00 0.00 -1.58 3.84 Design
comb5 -0.69 -1.46 -2.71 9.73 -11.20 0.00 0.00 -2.44 11.04 Design
comb6 -0.57 -0.44 -0.92 3.32 -3.76 0.00 0.00 -1.16 2.96 Design
comb7 -0.59 -1.74 -3.15 11.31 -13.05 0.00 0.00 -2.63 12.77 Design
comb8 -0.35 0.31 0.43 -1.52 1.83 0.00 0.00 -0.07 0.83 Design
comb9 -1.20 -1.51 -3.18 11.54 -13.05 0.00 0.00 -2.11 12.30 Design
com10 -0.95 -1.77 -2.98 10.64 -12.41 0.00 0.00 -3.61 11.54 Design
com11 -1.10 -1.75 -3.44 12.43 -14.18 0.00 0.00 -2.96 13.54 Design
com12 -1.05 -1.53 -2.72 9.75 -11.28 0.00 0.00 -2.76 10.30 Design
com13 -0.60 -0.58 -1.46 5.35 -5.93 0.00 0.00 -0.60 5.63 Design
com14 -0.34 -0.84 -1.26 4.44 -5.29 0.00 0.00 -2.10 4.87 Design
com15 -0.49 -0.82 -1.72 6.23 -7.05 0.00 0.00 -1.45 6.86 Design
com16 -0.45 -0.60 -1.00 3.56 -4.16 0.00 0.00 -1.25 3.63 Design
---------------------------------------------------------------------------------------------------------------------------------------------------------
GEOMETRIC CONSIDERATIONS
Dimensions Unit Value Min. value Max. value Sta. References
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Extended end plate
Vertical bolt spacing (external flange) [cm] 7.62 4.23 -- Sec. J3.3
Horizontal center-to-center spacing (gage) [cm] 8.89 6.67 14.60 Sec. J3.3,
DG4 Sec. 2.4,
DG4 Sec. 2.1,
2.4,
DG16 Sec. 2.5
Inner bolt distance (external flange) [cm] 3.81 2.86 -- DG4 Sec. 2.1
Inner bolt distance (internal flange) [cm] 3.81 2.86 -- DG4 Sec. 2.1
DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Moment end plate (external flange)
Flexural yielding [Ton*m] 6.90 4.53 comb3 0.66 DG16 Sec 2.5
No prying bolt moment strength [Ton*m] 6.69 4.53 comb3 0.68 DG16 Sec 2.5
Bolt rupture with prying moment strength [Ton*m] 6.07 4.53 comb3 0.75 DG16 Sec 2.5
Bolts shear [Ton] 22.56 0.35 comb8 0.02 Tables (7-1..14)
Bolt bearing under shear load [Ton] 73.99 1.34 comb2 0.02 Eq. J3-6
Shear yielding [Ton] 38.58 8.75 comb3 0.23 DG4 Eq. 3.12
Moment end plate (internal flange)
Flexural yielding [Ton*m] 6.10 0.47 comb8 0.08 DG16 Sec 2.5
No prying bolt moment strength [Ton*m] 4.06 0.47 comb8 0.12 DG16 Sec 2.5
Bolts shear [Ton] 11.28 1.34 comb2 0.12 Tables (7-1..14)
Bolt bearing under shear load [Ton] 37.00 0.00 DL 0.00 Eq. J3-6
Shear yielding [Ton] 38.58 10.08 comb3 0.26 DG4 Eq. 3.12
Beam
Web weld shear strength [Ton] 17.42 0.00 DL 0.00 Eq. J2-4
Web weld strength to reach yield stress [Ton/m] 219.96 138.86 DL 0.63 Eq. J2-4,
Eq. J4-1
Shear yielding [Ton] 23.98 0.00 DL 0.00 Eq. J4-3
Flange weld capacity (external flange) [Ton] 34.04 17.50 comb3 0.51 Eq. J2-4
Flange weld capacity (internal flange) [Ton] 34.04 20.17 comb3 0.59 Eq. J2-4
Support
Flexural yielding (external flange) [Ton*m] 5.27 4.53 comb3 0.86 DG4 Eq. 3.20,
Sec. 2.2.3,
DG4 Eq. 3.21
Bolt rupture with prying moment strength [Ton*m] 6.07 4.53 comb3 0.75 DG16 Sec 2.5
Support bolt bearing (external flange) [Ton] 60.38 1.34 comb2 0.02 Eq. J3-6
Flexural yielding (internal flange) [Ton*m] 7.24 0.47 comb8 0.07 DG4 Eq. 3.20,
Sec. 2.2.3,
DG4 Eq. 3.21
Support bolt bearing (internal flange) [Ton] 30.19 0.00 DL 0.00 Eq. J3-6
Panel web shear [Ton] 27.78 20.00 comb3 0.72 Sec. J10-6,
Eq. J10-9
Support - right side
Local web yielding [Ton] 37.14 20.17 comb3 0.54 DG4 eq. 3.24,
DG13 Eq. 4.3-1,
Sec. J10
Transverse stiffeners - top
Yielding strength due to axial load [Ton] 18.57 0.28 comb3 0.01 Eq. J4-1
Compression [Ton] 15.43 0.00 DL 0.00 Sec. J4.4
Flange weld capacity [Ton] 17.82 0.28 comb3 0.02 Eq. J2-4
Web weld capacity [Ton] 53.84 0.28 comb3 0.01 Eq. J2-4
Transverse stiffeners - bottom
Yielding strength due to axial load [Ton] 18.57 0.00 DL 0.00 Eq. J4-1
Compression [Ton] 15.43 1.60 comb3 0.10 Sec. J4.4
Flange weld capacity [Ton] 17.82 1.60 comb3 0.09 Eq. J2-4
Web weld capacity [Ton] 53.84 1.60 comb3 0.03 Eq. J2-4
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Global critical strength ratio 0.86
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hewlett-Packard
Current Date: 19-May-18 2:24 PM
Units system: Metric
File name: C:\Users\Victor Valdez\Downloads\NAVE EMPACADORA DE PIÑA (ARQ. JOSE VLADIMIR PIMENTEL)\CONECCIONES NAVE
EMPACADORA DE PIÑA.cnx\
Steel connections
Results
________________________________________________________________________________________________________________________
________________________________________________________________________________
DEMANDS
Beam Column
Description Ru Pu Pu Mu22 Mu33 Load type
[Ton] [Ton] [Ton] [Ton*m] [Ton*m]
------------------------------------------------------------------------------------------------------
DL 0.88 0.00 -5.60 0.00 0.00 Design
LL 1.75 0.00 -5.02 0.00 0.00 Design
W 0.00 0.00 0.00 0.00 0.00 Design
SX 0.09 0.00 -0.19 0.00 0.00 Design
SY 0.00 0.00 0.00 0.00 0.00 Design
comb1 1.23 0.00 -7.84 0.00 0.00 Design
comb2 3.85 0.00 -14.75 0.00 0.00 Design
comb3 2.80 0.00 -11.74 0.00 0.00 Design
comb4 2.80 0.00 -11.74 0.00 0.00 Design
comb5 1.05 0.00 -6.72 0.00 0.00 Design
comb6 1.05 0.00 -6.72 0.00 0.00 Design
comb7 0.79 0.00 -5.04 0.00 0.00 Design
comb8 0.79 0.00 -5.04 0.00 0.00 Design
comb9 2.89 0.00 -11.93 0.00 0.00 Design
com10 2.71 0.00 -11.55 0.00 0.00 Design
com11 2.80 0.00 -11.74 0.00 0.00 Design
com12 2.80 0.00 -11.74 0.00 0.00 Design
com13 0.88 0.00 -5.23 0.00 0.00 Design
com14 0.70 0.00 -4.85 0.00 0.00 Design
com15 0.79 0.00 -5.04 0.00 0.00 Design
com16 0.79 0.00 -5.04 0.00 0.00 Design
------------------------------------------------------------------------------------------------------
GEOMETRIC CONSIDERATIONS
Dimensions Unit Value Min. value Max. value Sta. References
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Shear plate
Distance from the bolt line to the weld line [cm] 5.00 -- 8.89 p 10-102
Minimum plate or beam web thickness [cm] 0.61 -- 0.95 Table 10-9
Vertical center-to-center spacing (pitch) [cm] 6.35 4.23 8.53 Sec. J3.3,
Sec. J3.5
Beam
DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Shear plate
Bolts shear [Ton] 14.86 3.85 comb2 0.26 Tables (7-1..14)
Bolt bearing under shear load [Ton] 19.01 3.85 comb2 0.20 p. 7-18,
Sec. J3.10
Shear yielding [Ton] 19.60 3.85 comb2 0.20 Eq. J4-3
Shear rupture [Ton] 17.02 3.85 comb2 0.23 Eq. J4-4
Block shear [Ton] 17.49 3.85 comb2 0.22 Eq. J4-5
Plate (support side)
Weld capacity [Ton] 30.31 3.85 comb2 0.13 Tables 8-4 .. 8-11
Beam
Bolt bearing under shear load [Ton] 18.72 3.85 comb2 0.21 p. 7-18,
Sec. J3.10
Shear yielding [Ton] 23.98 3.85 comb2 0.16 Eq. J4-3
Support
Welds rupture [Ton/m] 186.44 12.63 comb2 0.07 p. 9-5
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Global critical strength ratio 0.26
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hewlett-Packard
Current Date: 19-May-18 2:25 PM
Units system: Metric
File name: C:\Users\Victor Valdez\Downloads\NAVE EMPACADORA DE PIÑA (ARQ. JOSE VLADIMIR PIMENTEL)\CONECCIONES NAVE
EMPACADORA DE PIÑA.cnx\
Steel connections
Results
________________________________________________________________________________________________________________________
________________________________________________________________________________
DEMANDS
Beam Column
Description Ru Pu Pu Mu22 Mu33 Load type
[Ton] [Ton] [Ton] [Ton*m] [Ton*m]
--------------------------------------------------------------------------------------------------------
DL -4.41 0.00 -9.38 0.00 -0.07 Design
LL -4.29 0.00 -8.87 0.00 -0.07 Design
W 0.11 0.00 -0.09 0.00 -0.31 Design
SX 0.01 0.00 -0.17 0.00 -0.08 Design
SY 0.26 0.00 -0.03 0.00 0.70 Design
comb1 -6.17 0.00 -13.13 0.00 -0.10 Design
comb2 -12.16 0.00 -25.45 0.00 -0.20 Design
comb3 -9.41 0.00 -20.27 0.00 -0.65 Design
comb4 -9.76 0.00 -19.98 0.00 0.34 Design
comb5 -5.20 0.00 -11.33 0.00 -0.33 Design
comb6 -5.38 0.00 -11.18 0.00 0.16 Design
comb7 -3.79 0.00 -8.59 0.00 -0.56 Design
comb8 -4.15 0.00 -8.30 0.00 0.43 Design
comb9 -9.57 0.00 -20.30 0.00 -0.23 Design
com10 -9.59 0.00 -19.96 0.00 -0.07 Design
com11 -9.32 0.00 -20.16 0.00 0.55 Design
com12 -9.84 0.00 -20.10 0.00 -0.85 Design
com13 -3.96 0.00 -8.61 0.00 -0.14 Design
com14 -3.98 0.00 -8.27 0.00 0.02 Design
com15 -3.71 0.00 -8.47 0.00 0.64 Design
com16 -4.23 0.00 -8.41 0.00 -0.76 Design
--------------------------------------------------------------------------------------------------------
GEOMETRIC CONSIDERATIONS
Dimensions Unit Value Min. value Max. value Sta. References
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Shear plate
Distance from the bolt line to the weld line [cm] 5.00 -- 8.89 p 10-102
Minimum plate or beam web thickness [cm] 0.64 -- 0.95 Table 10-9
Vertical center-to-center spacing (pitch) [cm] 6.35 4.23 15.24 Sec. J3.3,
Sec. J3.5
Beam
DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Shear plate
Bolts shear [Ton] 20.80 12.16 comb2 0.58 Tables (7-1..14)
Bolt bearing under shear load [Ton] 26.77 12.16 comb2 0.45 p. 7-18,
Sec. J3.10
Shear yielding [Ton] 25.72 12.16 comb2 0.47 Eq. J4-3
Shear rupture [Ton] 22.20 12.16 comb2 0.55 Eq. J4-4
Block shear [Ton] 22.08 12.16 comb2 0.55 Eq. J4-5
Plate (support side)
Weld capacity [Ton] 39.78 12.16 comb2 0.31 Tables 8-4 .. 8-11
Beam
Bolt bearing under shear load [Ton] 28.37 12.16 comb2 0.43 p. 7-18,
Sec. J3.10
Shear yielding [Ton] 31.33 12.16 comb2 0.39 Eq. J4-3
Support
Welds rupture [Ton/m] 316.94 30.39 comb2 0.10 p. 9-5
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Global critical strength ratio 0.58
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hewlett-Packard
Current Date: 19-May-18 2:28 PM
Units system: Metric
File name: C:\Users\Victor Valdez\Downloads\NAVE EMPACADORA DE PIÑA (ARQ. JOSE VLADIMIR PIMENTEL)\CONECCIONES NAVE
EMPACADORA DE PIÑA.cnx\
Steel connections
Results
________________________________________________________________________________________________________________________
________________________________________________________________________________
DEMANDS
Description Ru Pu Mu PufTop PufBot Load type
[Ton] [Ton] [Ton*m] [Ton] [Ton]
----------------------------------------------------------------------------------------------------
DL 0.60 -1.64 1.00 0.00 0.00 Design
LL 1.10 -1.68 1.00 0.00 0.00 Design
W 0.29 -0.83 1.00 0.00 0.00 Design
SX 0.09 -0.05 0.00 0.00 0.00 Design
SY 0.04 -0.25 0.00 0.00 0.00 Design
comb1 0.83 -2.30 1.40 0.00 0.00 Design
comb2 2.48 -4.66 2.80 0.00 0.00 Design
comb3 2.29 -4.99 3.80 0.00 0.00 Design
comb4 1.35 -2.32 0.60 0.00 0.00 Design
comb5 0.95 -2.64 2.00 0.00 0.00 Design
comb6 0.48 -1.30 0.40 0.00 0.00 Design
comb7 1.01 -2.81 2.50 0.00 0.00 Design
comb8 0.07 -0.14 -0.70 0.00 0.00 Design
comb9 1.91 -3.71 2.20 0.00 0.00 Design
com10 1.73 -3.60 2.20 0.00 0.00 Design
com11 1.85 -3.90 2.20 0.00 0.00 Design
com12 1.78 -3.40 2.20 0.00 0.00 Design
com13 0.63 -1.53 0.90 0.00 0.00 Design
com14 0.45 -1.42 0.90 0.00 0.00 Design
com15 0.57 -1.72 0.90 0.00 0.00 Design
com16 0.50 -1.23 0.90 0.00 0.00 Design
----------------------------------------------------------------------------------------------------
GEOMETRIC CONSIDERATIONS
Dimensions Unit Value Min. value Max. value Sta. References
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Extended end plate
Vertical bolt spacing (external flange) [cm] 8.69 4.23 -- Sec. J3.3
Horizontal center-to-center spacing (gage) [cm] 6.99 4.23 14.60 Sec. J3.3,
DG4 Sec. 2.4,
DG4 Sec. 2.1,
2.4,
DG16 Sec. 2.5
Inner bolt distance (external flange) [cm] 3.81 2.86 -- DG4 Sec. 2.1
Inner bolt distance (internal flange) [cm] 3.81 2.86 -- DG4 Sec. 2.1
DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Moment end plate (external flange)
Flexural yielding [Ton*m] 4.80 0.68 comb8 0.14 DG16 Sec 2.5
No prying bolt moment strength [Ton*m] 6.49 0.68 comb8 0.11 DG16 Sec 2.5
Bolt rupture with prying moment strength [Ton*m] 5.81 0.68 comb8 0.12 DG16 Sec 2.5
Bolts shear [Ton] 22.56 2.48 comb2 0.11 Tables (7-1..14)
Bolt bearing under shear load [Ton] 59.19 0.00 DL 0.00 Eq. J3-6
Shear yielding [Ton] 27.56 8.59 comb3 0.31 DG4 Eq. 3.12
Moment end plate (internal flange)
Flexural yielding [Ton*m] 4.01 3.15 comb3 0.79 DG16 Sec 2.5
No prying bolt moment strength [Ton*m] 4.06 3.15 comb3 0.78 DG16 Sec 2.5
Bolt rupture with prying moment strength [Ton*m] 3.64 3.15 comb3 0.87 DG16 Sec 2.5
Bolts shear [Ton] 11.28 0.07 comb8 0.01 Tables (7-1..14)
Bolt bearing under shear load [Ton] 29.60 2.48 comb2 0.08 Eq. J3-6
Shear yielding [Ton] 27.56 6.10 comb3 0.22 DG4 Eq. 3.12
Beam
Web weld shear strength [Ton] 17.42 2.48 comb2 0.14 Eq. J2-4
Web weld strength to reach yield stress [Ton/m] 219.96 138.86 DL 0.63 Eq. J2-4,
Eq. J4-1
Shear yielding [Ton] 23.98 2.48 comb2 0.10 Eq. J4-3
Flange weld capacity (external flange) [Ton] 34.04 17.18 comb3 0.50 Eq. J2-4
Flange weld capacity (internal flange) [Ton] 34.04 12.19 comb3 0.36 Eq. J2-4
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Global critical strength ratio 0.87
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
REACCIONES EN LOS PUNTOS DE APOYO DE LA ESTRUCTURA
HP
L O A D C O M B I N A T I O N D A T A
COMB1
DEAD DEAD 1.400
COMB2
DEAD DEAD 1.200
LIVE LIVE 1.600
COMB3
DEAD DEAD 1.200
LIVE LIVE 1.000
VIENTO WIND 1.600
COMB4
DEAD DEAD 1.200
LIVE LIVE 1.000
VIENTO WIND -1.600
COMB5
DEAD DEAD 1.200
VIENTO WIND 0.800
COMB6
DEAD DEAD 1.200
VIENTO WIND -0.800
COMB7
DEAD DEAD 0.900
VIENTO WIND 1.600
COMB8
DEAD DEAD 0.900
VIENTO WIND -1.600
COMB9
DEAD DEAD 1.200
SX QUAKE 1.000
LIVE LIVE 1.000
COMB10
DEAD DEAD 1.200
LIVE LIVE 1.000
SY QUAKE 1.000
COMB11
DEAD DEAD 1.200
LIVE LIVE 1.000
SX QUAKE -1.000
COMB12
DEAD DEAD 1.200
LIVE LIVE 1.000
SY QUAKE -1.000
COMB13
DEAD DEAD 0.900
SX QUAKE 1.000
COMB14
DEAD DEAD 0.900
SY QUAKE 1.000
COMB15
DEAD DEAD 0.900
SX QUAKE -1.000
COMB16
DEAD DEAD 0.900
SY QUAKE -1.000
COMB17
DEAD DEAD 1.000
LIVE LIVE 1.000
COMB18
DEAD DEAD 1.000
LIVE LIVE 1.000
VIENTO WIND 1.000
COMB19
DEAD DEAD 1.000
VIENTO WIND 0.800
COMB20
DEAD DEAD 1.000
VIENTO WIND -0.800
COMB21
DEAD DEAD 0.900
VIENTO WIND 1.000
COMB22
DEAD DEAD 0.900
VIENTO WIND -1.000
COMB23
DEAD DEAD 1.000
LIVE LIVE 1.000
SX QUAKE 0.750
SAFE v8.0.8 File: CIMIENTOS NAVE EMPACADORA DE PIÑA Kgf-cm Units PAGE 2
May 17,2018 0:35
HP
L O A D C O M B I N A T I O N D A T A
COMB24
DEAD DEAD 1.000
LIVE LIVE 1.000
SY QUAKE 0.750
COMB25
DEAD DEAD 1.000
LIVE LIVE 1.000
SX QUAKE -0.750
COMB26
DEAD DEAD 0.900
SX QUAKE 0.750
COMB27
DEAD DEAD 0.900
SY QUAKE 0.750
COMB28
DEAD DEAD 0.900
SX QUAKE -0.750
COMB29
DEAD DEAD 0.900
SY QUAKE -0.750