Sei sulla pagina 1di 2

Product Touch Pilot™

Specification
Part Number: 33CNTPILOT

The Touch Pilot is a component of


Carrier’s control system. It serves as a
user interface and configuration tool for
Carrier's AquaForce™ and all Carrier
communicating devices. The Touch
Pilot can be used to install and com-
mission, monitor, and control any
device operating on the Carrier network
including chillers, 3V zoning systems,
and air sources.

Features/Benefits
Keypad and Display
The Touch Pilot consists of a 1/4 VGA
Liquid Crystal Display (LCD) with
adjustable contrast and backlighting. It
features a touch screen panel and
display that allows a user to navigate
through the menus, select desired
options, and modify data.

Complete System Access


System Interface

• Communicate with Carrier network


devices
• Supports local equipment mode or
network mode
• Network mode allows up to 50
devices in Attach list
• Access configuration, maintenance,
service, set point, time schedule,
alarm history and status data in
Carrier network devices
• Force and auto points in Carrier
network devices
• Modify address of Carrier network
devices
• Modify time/date in Carrier network
devices
• Display metric or customary U.S.
units
• Allows three security levels
• Supports foreign languages

Copyright 2006 Carrier Corporation 11-808-364-01 Rev. 09/06


Specifications subject to change without notice.

Book 4
Tab BC1d
Features/Benefits
Carrier Network Mounting
• Network alarm acknowledgement and indication The Touch Pilot can be wall mounted using four #8 x
• Provide capability to fully monitor and control 1.5 in Phillips panhead screws and four wall anchors
chillers, zoning, and air sources (field supplied).

Specifications
Power Requirements . . 24 Vac + 6 Vac (18 to 30 Vac) Approvals
(47 to 63 Hz)
Dimensions . . . . . . . . 9.7 in. H x 7.1 in. W x 1.4 in. D UL 873 and CE Mark Industrial listed.
(246.4 mm x 180.3 mm x 35.6 mm) European: 73/23CEE and 93/68CEE, with related
Operating Temperature . . -4 F to 158 F (-20 C to 70 C) harmonized standards: EN 60335-1:1994 (General).
Storage Temperature . . -22 F to 176 F (-30 C to 80 C) Australian: C-Tick AS/NZS 4251.1.
Operating Humidity . . . . .10% to 85% non-condensing
at or below 40 C Conforms to guidelines for radiated and conducted
10% to 76% non-condensing at 70 C emissions for a Class A device as stated in FCC Rules
Storage Humidity . . . . . . . 10 to 41% at or below 80 C and Regulations Part 15, Subpart J.

Vibration
Performance Vibration . . . . . . . . . . . . . . . . . . . 1.0 G
measured at 20 to 300 Hz

Dimensions
Touch Pilot

Copyright 2006 Carrier Corporation 11-808-364-01 Rev. 09/06


Specifications subject to change without notice.

Potrebbero piacerti anche