Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
, LTD
GUANGZHOU SANQ DIESEL GENERATOR SET CO., LTD
Tel:86-13729889887 Fax:86-20-84550026
Web: www.fdkenergy.com Email: info@fdkenergy.com
DATA SHEET
DIESEL GENERATOR 220KW
MODEL#FDK-P200/H1
50HZ/1500RPM
PERKINS MODEL: 1306C-E87TAG6
General Features:
All qualified generator sets are subjected to a comprehensive performance test which includes 50% load, 70% load, 100%
load, 110% load and to check, verify that all control systems, alarm and shut-down protection.
Equipped with battery charger and 24V high performance maintenance-free lead-acid starting batteries and connecting
cables.
Stainless galvanized zinc plates with strong corrosion-proof.
Vibration isolators between the engine/alternator and base frame.
Equipped with industrial silencer and flexible exhaust hose.
Designed to comply with ISO8528/GB2820.
Powered by Perkins engine and coupled with Stamford alternator.
Water jacket preheater, oil heater and double air cleaner, etc. are available.
(1) Prime power: The rating is available for an unlimited of annual operating hours in variable load applications, in accordance with
ISO8528-1.A 10% overload is available for a period of 1 hour within 12-hour period of operation, in accordance with ISO 3046-1.
(2) Standby power: The rating is applicable for supplying emergency power in variable load applications for up to 200 hours per year in
ISO9001:2008 FDK reserves the right to change the specifications and designs without noice.
www.fdkenergy.com
SHENZHEN FUDIANKANG ENERGY CO., LTD
GUANGZHOU SANQ DIESEL GENERATOR SET CO., LTD
Tel:86-13729889887 Fax:86-20-84550026
Web: www.fdkenergy.com Email: info@fdkenergy.com
Piston Speed 6.8 m/s Fuel Consumption at 100% load (L/HOUR) 56.9 at rated
ElectropaK net engine power 198 kw speed
Total Coolant Capacity (L) 37.2 Minimum cranking speed. 130 rpm
Alternator Specifications
Alternator model UCI274K Number of phase 3
Alternator manufacturer STAMFORD Rated voltage 400V (Available with
Exciter type Single bearing, Brushless, custom requirements)
Self-excited Power factor 0.8
ISO9001:2008 FDK reserves the right to change the specifications and designs without noice.
www.fdkenergy.com
SHENZHEN FUDIANKANG ENERGY CO., LTD
GUANGZHOU SANQ DIESEL GENERATOR SET CO., LTD
Tel:86-13729889887 Fax:86-20-84550026
Web: www.fdkenergy.com Email: info@fdkenergy.com
Optional
Generator set Alternator Low environment Temp ATS
Open generator set Stamford Water heater CHINT
Silent generator set Marathon Oil heater SCHNEIDER
Trailer generator set Mecc Alte Battery heater ABB
ABB MCCB circuit breaker Leroy Somer
Farady
Engga
Sales Promises
FDK provides a full line of brand new and high quality products. Each and every unit is strictly factory tested before
shipment.
Quality warranty is according to our standard conditions: 12 months from BL date or 1000 running hours, whichever comes
first.
Service and parts are available from FDK or distributors in your location.
ISO9001:2008 FDK reserves the right to change the specifications and designs without noice.
www.fdkenergy.com
Technical Data
1300 Series EDi 1306C-E87TAG6
ElectropaK 246 kW @ 1500 rev/min
Basic technical data Centre of gravity
Rating code ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . M433 Position of centre (dry, base engine)
Number of cylinders . ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 6 -forward from rear of block ... ... ... ... ... ... ... ... ... ... ... . 480,1 mm
Cylinder arrangement .. ... ... ... ... ... ... ... ... ... ... ...Vertical, in-line -above centre line of block ... ... ... ... ... ... ... ... ... ... ... . 185,4 mm
Cycle ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... Four stroke -offset to RHS of centre line.. ... ... ... ... ... ... ... ... ... ... ... 25,4 mm
Induction system .. ... ... ... .air to air charged cooled, turbocharged Position of centre (dry, base engine plus accessories)
Compression ratio ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 16·9:1 -forward from rear of block ... ... ... ... ... ... ... ... ... ... ... . 449,6 mm
Bore . ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. 116,6 mm -above centre line of block ... ... ... ... ... ... ... ... ... ... ... . 182,9 mm
Stroke .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. 135,9 mm -offset to RHS of centre line.. ... ... ... ... ... ... ... ... ... ... ... 10,2 mm
Cubic capacity . ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .8,7 litres
Direction of rotation.. ... ... ... ... ... ... ... ...Clockwise, from the front Performance
Firing order .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 1, 5, 3, 6, 2, 4 Data based on ISO/TR14396, SAE J1995 3.1, ISO3046/1, DIN6271
Engine speed control in
Engine weight accordance with ... ... ... .BS5514 pt.4; ISO3046-4 and ISO8528-5
-dry (1), (2) ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 671 kg Cyclic irregularity
-wet (1), (2) .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 698 kg -at 110% stand-by power .. ... ... ... ... ... ... ... ... ... ... ... ... .. 0,0253
-ElectropaK kit (3) ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 225 kg
(1) Includes SAE 2 flywheel and flywheel housing Test conditions
(2) Without ElectropaK kit -air temperature ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 °C
(3) Includes radiator; fan; fan-guards; starter motor; alternator -barometric pressure. ... ... ... ... ... ... ... ... ... ... ... ... ... ... 100 kPa
and air filter assembly. Does not include weight of radiator coolant
-relative humidity ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. 30%
Overall dimensions (includes ElectropaK kit)
-height.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 1369 mm
Sound level
-length.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 1822 mm -bare engine at 1 metre. ... ... ... ... ... ... ... ... ... ... ... ... . 106 dB(A)
-all ratings certified to within . ... ... ... ... ... ... ... ... ... .+3 % to -5 %
-width (including mounting brackets) ... ... ... ... ... ... ... ... . 875 mm
If the engine is to operate in ambient conditions other than those of
Moments of inertia (mk²) the test conditions, suitable adjustments must be made for these
-engine. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. 0,536 kgf m² changes. For full details, contact Perkins Technical Service
-flywheel SAE 2 (option GL08) ... ... ... ... ... ... ... ... .. 1,005 kgf m²
Department; For details of load acceptance values, contact the
applications department at Perkins Engines Company Limited,
Stafford.
www.fdkenergy.com
General installation
Type of operation and application
Designation Units Base Prime Stand-by
50Hz 50Hz 50Hz
Gross engine power kW 204 224 246
Fan power kW 7 7 7
Brake mean effective pressure kPa 1875 2058 2261
Mean piston speed m/s 6,8 6,8 6,8
ElectropaK net engine power kW 198 217 239
Engine coolant flow l/min 238 238 238
Combustion air flow m³/min - - 16,4
Exhaust gas flow (max) m³/min - - 44,5
Exhaust gas temperature (max) °C - - 528
Cooling fan air flow m³/min 375 375 375
kWe - 200 220
Typical Genset electrical output (0.8 pf)
kVa - 250 275
Energy balance
Energy in fuel (Fuel heat of combustion) kW - 529 583
Gross heat to power kW - 224 246
Energy to coolant and lubricating oil kW - 103 110
Energy to exhaust kW - 126 142
Heat to radiation kW - 40 44
Heat charge cooler kW - 36 41
Caution: The airflows shown in this table will provide acceptable cooling for an open power unit operating in ambient temperatures of up
to 53 °C, 46 °C. if a canopy is fitted. If the power unit is to be enclosed totally, a cooling test should be done to check that the engine
cooling is acceptable. If there is insufficient cooling, contact Perkins Technical Service Department.
www.fdkenergy.com
1306C-E87TAG6 ElectropaK, left side view
941,0
582,4
123,5
20,8
Y Y
W1370
www.fdkenergy.com
1306C-E87TAG6 ElectropaK, front and rear views
Z
1/4"- 18 NPTF
Fuel return
1/4"- 18 NPTF
Fuel inlet
389,6
317,0
Y Y
217,3
3/8"- 16 UNC - 2B Thru
12 holes equi-spaced
on 466,73 P.C.D.
31,8
Filter removal
Ø 135,5 Filter
3/8 - 16 UNC - 2B 19,0 (.75) Deep 140,2
8 holes equi-spaced Fuel return
on 333,38 P.C.D. 206,5 174,0
Fuel inlet Breather
260,4 260,4
Mounting face Mounting face
308,1
874,8
97,4
927,0
832,1
3/8"- BSP
Drain plug
112,0
Y Y
15,0
179,0
382,9
418,3
6,4
97,5
2 Holes Ø 21,0
218,0 221,2
Z
W1372
www.fdkenergy.com
1306C-E87TAG6 ElectropaK, right side view
X
698,5 Lifting eyes
4,1
Ø 38,1 Thru
2 places
& conditioner
Coolant filter
Ø 93,2
M12 x 1,75
561,8
571,0
561,4
Thru 8 holes
(4 per side)
215,4
144,0
Y Y
Lube
oil
filter
15,88
101,6
127,0
88,9
63,5
60,7
3/4"- 16 UNF Thru
tach sender 28,83
123,1
239,8
360,4
Coolant drain
711,6
W1371
www.fdkenergy.com
1306C-E87TAG6 ElectropaK, plan view
X
1071,5
773,5
723,6
662,6
12,7 Filter removal
578,0
456,7
437,4
400,0
293,3
Y Y
400,0
437,4
456,4
W1373
www.fdkenergy.com
Cooling system Fuel system
Radiator Type of injection.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. Direct
-face area .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...0,6 m² Fuel feed pump ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . Bosch
-rows and materials ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 3, brass Hydraulic pump ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...Rexroth
-matrix density and material .. ... ... ... ... ... ... ... ... ... ... 12, copper Fuel atomiser .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... Heui
-width of matrix .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 745 mm Feed pump operating pressure... ... ... ... ... ... ... ... ... ... .. 417 kPa
-height of matrix. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 750 mm
-pressure cap setting . ... ... ... ... ... ... ... ... ... ... ... ... ... ...68,9 kPa
Fuel lift pump
Estimated cooling air flow reserve. ... ... ... ... ... ... ... ... .. 0,13 kPa -flow/hour ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .180 litres/hr
-suction depression. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 14 kPa
Fan -pressure. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 137,9 kPa
-diameter ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .711,2 mm Maximum suction head ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 1 m
-drive ratio.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...1·2 : 1 Maximum static pressure head ... ... ... ... ... ... ... ... ... ... ... ... . 3 m
-number of blades.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...7 Maximum fuel pump suction (clean system)... ... ... ... ... ... 14 kPa
-material. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. Plastic Governor type . ... ... ...electronic (isochronous or droop capability)
-type... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . Pusher -speed control for diesel fuel to conform to. ... .. BS 2869 Class A2
... ... ... ... ... ... ... ... ... ... ... ... ... ... . ASTM D975 66T Number 2D
Coolant
Maximum pressure head at pump . ... ... ... ... ... ... ... ... ... 12,95 m Fuel specification
Total system capacity USA Fed Off Highway
Fuel specification
-with radiator.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 37,2 litres EPA 2D 89.330-96
-without radiator. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 12,8 litres Density (kg/l @ 15 °C) 0,845 - 0,85
-draindown capacity .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... 1,3 litres Viscosity (mm²/s @ 40 °C) 2,0 - 3,2
Maximum top tank temperature. ... ... ... ... ... ... ... ... ... ... ..103 °C Sulphur Content 0,03 - 0,05%
Minimum temperature to engine ... ... ... ... ... ... ... ... ... ... ... 79 °C Cetane Number 40 - 48
Temperature rise across engine ... ... ... ... ... ... ... ... ... ... ... ..5 °C
Max permissible external system resistance . ... ... ... ... ... ..35 kPa Fuel consumption
Thermostat start to open ... ... ... ... ... ... ... ... ... ... ... ... ... .87,8 °C -at rated speed ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 56,9 litres/hr
Thermostat fully open ... ... ... ... ... ... ... ... ... ... ... ... ... ... .96,1 °C
Induction system
Electrical system
Maximum air intake restriction
-type... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. Negative ground -clean filter .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 2,5 kPa
-alternator .. ... ... ... ... ... ... ... ... ... ... ... ... ... 12/24V Lucas AC5R
-dirty filter ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 6,22 kPa
-starter motor . ... ... ... ... ... ...12V Lucas PE129 / 24V Lucas S115
-air filter type ... ... ... ... ... ... ... ... ... ... ... ... ... .. dry paper element
Cold start recommendations Turbocharger type .. ... ... ... ... ... ... ... ... ... ... ... ... ... Allied signal
Minimum cranking speed... ... ... ... ... ... ... ... ... ... ... .. 130 rev/min
Minimum Battery specifications
Grade of
starting engine BS3911 SAEJ537 Number
temperature lubricating Cold Cold of Perkins
oil start cranking batteries type
°C °F amps amps needed
-15 5 10W 440 660 2 A
-20 4 5W 440 660 2 A
Exhaust system
Maximum back pressure ... ... ... ... ... ... ... ... ... ... ... ... ...10,7 kPa
Note: For exhaust pipe details, see chapter five of the Gen Set
Manual.
www.fdkenergy.com
1300 Series EDi 1306C-E87TAG6 246 kW @ 1500 rev/min
Lubrication system
Lubricating oil capacity
-dry engine with filter.. ... ... ... ... ... ... ... ... ... ... ... ... ... .28,3 litres
-oil change with filter .. ... ... ... ... ... ... ... ... ... ... ... ... ... .26,4 litres
-oil change without filter . ... ... ... ... ... ... ... ... ... ... ... ... .22,7 litres
Maximum engine operating angles
-front up, front down, right side or left side. ... ... ... ... ... ... ... ...30°
0W
5W20
10W30
15W40
20W50
20
30
40
-30 -20 -10 0 10 20 30 40 50oC
-22 -4 14 32 50 68 86 104 122oF
Ambient temperarture
W1355
Mountings
Maximum static bending moment
at rear face of block .. ... ... ... ... ... ... ... ... ... ... ... ... ... ..2644 Nm
Publication No. TPD1429E, Issue 3. January 2007. © Perkins Engines Company Limited
@Perkins ® Distributed by