0 valutazioniIl 0% ha trovato utile questo documento (0 voti)
45 visualizzazioni3 pagine
This certificate summarizes the performance of a DJF(a) series Swung Drop Hammer Exhaust Fan produced by Shandong yuyun sanhe machinery Co.,Ltd. in China. The fan can be mounted inside or outside buildings, with or without thermal insulation, and vertically or horizontally. It maintained its functioning for at least 120 minutes in testing. The fan has a diameter range of 400mm, unidirectional or reversible flow, and is powered by a Siemens motor between frame sizes 90S minimum and 90S maximum. The fan meets standards including EN 12101-3, EN13501-4, EN1363-1, EN1363-2, and ENV 1363-3
This certificate summarizes the performance of a DJF(a) series Swung Drop Hammer Exhaust Fan produced by Shandong yuyun sanhe machinery Co.,Ltd. in China. The fan can be mounted inside or outside buildings, with or without thermal insulation, and vertically or horizontally. It maintained its functioning for at least 120 minutes in testing. The fan has a diameter range of 400mm, unidirectional or reversible flow, and is powered by a Siemens motor between frame sizes 90S minimum and 90S maximum. The fan meets standards including EN 12101-3, EN13501-4, EN1363-1, EN1363-2, and ENV 1363-3
This certificate summarizes the performance of a DJF(a) series Swung Drop Hammer Exhaust Fan produced by Shandong yuyun sanhe machinery Co.,Ltd. in China. The fan can be mounted inside or outside buildings, with or without thermal insulation, and vertically or horizontally. It maintained its functioning for at least 120 minutes in testing. The fan has a diameter range of 400mm, unidirectional or reversible flow, and is powered by a Siemens motor between frame sizes 90S minimum and 90S maximum. The fan meets standards including EN 12101-3, EN13501-4, EN1363-1, EN1363-2, and ENV 1363-3
AAA Level of National Quality Company” “Honesty and Qualitative Enterprise”, The company strictly executes quality standard, and has passed ISO9001:2008 international quality system certification.
DJF(a)series Swung Drop Hammer Exhaust Fan
No.566 Yineng Road
Qingzhou Economic development Zone Qingzhou, Shandong province produced by or for China This certificate attests that all provisions concerning the assessment and verification of constancy of performance described in Annex 1 of the standard EN 12101-3:2015 Under system 1 for the performance set out in this certificate are applied and that the factory production control conducted by the manufacturer is assessed to ensure the Constancy of performance of the construction product. This certificate comprises an annex with 1 page. It has first been issued on 16-03-2019. It will remain valid till 12-10-2021, as neither the harmonised specification, the construction product, the AVCP methods nor the manufacturing conditions in the plant are modified significantly, unless suspended or withdrawn by the product certification body. Qingzhou, 13-07-2019 ……………………………………………
Zhang Yong Head of certification
Z-3/709/03 Zhang Yong
Smoke Exhaust Ventilator
1. Use and application classes The ventilator may be mounted as follows: [x] outside of the building without thermal insulation [_] outside of the building including thermal insulation X inside the building but outside of the fire zone, without thermal insulation [X] inside the fire zone without thermal insulation [_] inside the fire zone including thermal insulation. The motor axle shall be orientated as follows: [X] horizontal, floor standing [_] horizontal, wall mounted _] horizontal, ceiling mounted [XX] vertical, Ap upward L] vertical, Ap downward [_] vertical, wall mounted [_] vertical, ceiling mounted [x] The ventilator may be used for both functions. [_] Cooling is necessary. 2. Minimum functioning time in the test the ventilator maintained its function for at least 120 min. 3. Technical product data Hub ratio N, M, X, ¥ Range of diameters 400 mm Direction of flow unidirectional, reversible Motor maker Siemens Motor frame size min 90S max 90S 4. Additional information Standards referred to: [ EN 12101-3. | EN13501-4 | EN1363-1 | EN1363-2 | ENV 1363-3 | End of the certificate of constancy of performance -------------------------------