Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
www.dextragroup.com
2 Dextra | | The Ultimate Splicing System
Benefits
STEP 1
(Standard / Position). Position splice
STEP 2
▪▪ Type 2 coupler suitable for seismic areas. Even when both bars cannot be turned,
▪▪ Tested under reverse cyclic conditions. the Fortec® system uses a standard
TYPE
Rebar Preparation:
A 3-Steps Process
90°
The end of the reinforcing bar is The sawn end of the reinforcing Finally, the enlarged end of the
sawn square. bar is then enlarged by a patented rebar is threaded to the required
cold forging process. The core length.
diameter of the bar is increased
to a pre-determined size.
www.dextragroup.com 3
Applications
Caging splice
To connect cages that haven’t been Standard coupler
Small size
Large size
Headed Bars
Also called “End Anchors” they are convenient
alternative to hooked bars to provide end anchorages
in congested areas. Fortec® standard anchorage heads
are circular and have a net bearing area of 4 times or Prefabricated Cages
9 times the cross-section of the bar.
Generic specification
● No reduction of the nominal cross section area of the parent bars.
● Parallel-thread system.
www.dextragroup.com