Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1 COMPANY PROFILE
About Us
The company was established in 2015 as a leading manufacturer of flat glass tempering, active in both
Philippine domestic market thanks to its long-standing knowledge and experience in the glass
industries, using some of the most sophisticated technological innovations and maintaining high
standards of quality never reached before.
Right from the start, thanks to the enthusiasm and passion of a closely-knit team, it didn’t take long
for the results to achieve, allowing the company to become increasingly more successful, starting in
the Philippine market by installing various glass applications for both architectural and interior
applications in the Philippine market, then expanding to the surrounding ASEAN countries.
EUROTEMP have become a synonym for reliability and production quality thanks to the commitment
and choices made by the company’s management, orientated towards constant research and
technological product development.
The in-house technical department is responsible for research and development, with the help of a
team of experts working on systems of the latest generation, carefully following new designs and
updating and operating programs for glass tempering process. The company has always been
committed to meeting the most difficult challenges and an increasingly high number of these are
related to the environment. The company operates through a widespread sales network covering the
whole Philippine Islands, major cities and developing areas.
Euro Tempered Glass Industries Corporation offers custom glass products and glass fabrication and
finishing services to help you meet your entire specialty glass needs. From architectural glass to
interior glass requirements.
Through the use of our state of the art tools, including our glass specialty equipment, we assure highly
accurate finished dimensions. While both of our cutting methods (by hand, and water jet) provide
measurements surpassing industry standards, these machines produces such precision that surpasses
anything on the market. This attention to detail, only second to our customer service, is top notch.
Whether you are a contractor looking at large orders, or a home owner just trying to complete a
project around the house, we provide custom tempered glass.
2 COMPANY PROFILE
Core Values & Beliefs:
We define ourselves as a company of people that genuinely care. We value talent, experience and
expect high performance. We believe in creating an environment where people attain consistent
excellence. We believe in striving for the best by maximizing our unwavering potential. We believe in
expanding our knowledge of products, services, and market requirements. Our future rests on
creativity, skills, teamwork and integrity of our most valued employees. We value hard work. We are
honest. We honor our commitments. We are consistent and fair. We are privileged to be able to serve
our market. We genuinely care and sincerely appreciate all your support.
OUR VISION
Euro Tempered Glass Industries Corp intends to become leader in the tempered and safety glass
industry thru its utmost commitment to produce and deliver the most reliable, most innovative and
most advanced products possible.
OUR MISSION
Our mission is to become the most desirable company to work with and strengthen our relationships
with our valued customers. Encourage new ideas and innovations in our team. Build a reputation for
reliability, quality, service, and convenience. We must know our business the best and therefore serve
the best.
- To deliver innovative quality products, most advanced design, production and installation
methodologies.
- To provide individualized customer service – providing our customers with what they want, when
and how they want it.
- To incorporate fully integrated programs developed for the partners and customers.
- To combine experience of the principal owners, bring upper office management skills, high levels of
customer service, and over 20 years in distribution and sales management.
3 COMPANY PROFILE
EUROTEMP PRODUCTS & SEVICES
Tempered Glass
Clear Float Glass (Annealed)
Low-E Glass
Reflective Glass
Laminated Glass
Insulated Glass Unit
Over-size Glass
Back-Painted / Frosted Glass
Digi-Glass
Glass Hardware and Accessories:
o DORMA - Germany
o Preference – Premiere Singapore brand
Hi-Grade Lear Doors and Windows
Aluminum Composite Panels (EUROBOND)
Railings and Façade Solutions
Services Offered:
o Glass Tempering
o Façade and Curtain-Wall Consultation
o Aluminum Powder-coating
o Glass/Aluminum Installation Training Program
o Glass Safety and Maintenance Services
4 COMPANY PROFILE
Tempered Glass
When you are designing with the involvement of glass, you should be aware that there are
City or Municipal Building Codes that you need to follow. The main one is you need to
understand when it is required to use Tempered safety glass.
Tempered glass is used in buildings for unframed assembles, structurally loaded applications,
and any other application that would become dangerous in the event of human impact.
Building codes in some cities in the Philippines require tempered glass in several situations.
Applications:
Curtain walls of high-rise & mid-rise buildings
Exterior and interior glass for building
Interior spandrels for wall partition
Doors & Windows opening
Showroom
Lobby facade
Escalator Side Plates
Glass Railings & Staircase
Viewing partitions for sports complex, resorts, airport & hospital
Malls & shopping center store front
Shower enclosures
Frameless glass partitions
Scenic elevators
Automobile, Home and Industrial Applications
5 COMPANY PROFILE
Curtain Wall Glass Railings
6 COMPANY PROFILE
Low-E Glass
- Low-E- Low emissivity (Low-E glass) is a critical component of high performance energy
efficient windows. This glass has unique coating that allows the passage of short wave solar
energy into a building but prevents long-wave energy produced by heating systems
and lighting from escaping outside. Low-E glass allows light to enter while also providing
thermal insulation.
Reflective Glass
SUNERGY
STOPSOL
The Stopsol range of solar protection glasses comprises three types of coatings, which
gives rise to three distinct product lines:
STOPSOL SILVERLIGHT: glass with a lower degree of reflections with a bluish hue. This
product line stands out with its remarkable photometric and energy.
7 COMPANY PROFILE
Laminated Glass
- Eurotemp-Laminated Glass features an interlayer bonded between two or more glass plies
using heat and pressure. The glass plies may be of equal or unequal thickness. Laminated glass
is a durable, high-performance glazing product, designed to remain integral in the
opening should glass damage occur.
Often laminated glass is required to provide protection against man-made threats or natural
disasters such as hurricanes, bomb blasts or forcible-entry.
- Insulating glass units, or IGU’s, are designed to keep home warmer during the wet season and
cooler in the summer. An insulating glass unit commonly consists of two (sometimes more) panes
of glass separated by a spacer material and sealed together at the edge. The insulating airspace is
filled with air or a noble gas, such as argon or krypton inside. Each glass pane has two surfaces, so
typical double-paned IGUs have four surfaces.
Spacers, features a unique design that creates an effective thermal barrier at the edge of the IGU
to help reduce conducted heat loss through the window, making them stronger and better at
retaining insulating gas than many conventional designs.
8 COMPANY PROFILE
Over-sized Glass
Is also named as extra-large glass (XXL glass), BIG glass, super-
sized glass, or jumbo glass.
- ColorSpray™ is a hardwearing, cost effective and durable coating for glass that can be used
both internally and externally in many glass applications. ColorSpray is a 2-part, resin-based
system with added colourant and special effects materials based on our proven specialist
formulations.
Digi Glass
- DigiGlass provides architects and designers the ability to create a one-of-a-kind aesthetic
giving them artistic freedom to create limitless possibilities.
9 COMPANY PROFILE
EUROTEMP HARDWARE ACCESSORIES
- The ST FLEX Green sliding door illustrates DORMA’s commitment to increasing energy
efficiency and thus to improving the sustainability of buildings. Despite its slender profile
design, the ST FLEX Green comes with outstanding thermal insulation, as confirmed by
the German testing, surveillance and certification body “ift Rosenheim”.
10 COMPANY PROFILE
- Preference Pte Ltd designs, manufactures and distributes architectural hardware, glass
fittings, extruded aluminum profiles, hydraulic closers, hinges, high performance louvers and
stainless steel products for the building industry.
SF96 AJ51
Applicat
ions:
A
r
e
v
o
SC60
l
u
Applicati t
ons: i
o
G n
e a
n r
t SLF 300 SLIDE AND STACK GLASS PANEL SYSTEM
y
l s
e - Features a comprehensive combination of
l
a aluminum top track that facilitates
i
GX990.1 n flexibility in design layout. This system is
m
d able to carry frameless glass door panels
- of
Applicatis up to 4000mm in height and width of l up to
ons: m i
1100mm.
o n
Po e
rt a
oh l
vc u
il m
do Brianna i
es n
si Applications: u
mn m
eg Freely hinged t
ca model r
PC404 hc PD41(LH) Rising hinge a
GK34
at model c
ni
Applications: - In the Provide for k - I
io field of continuous g n
cn
Provi architectvinyl seal e
11 COMPANY PROFILE de t
a. ural installation o h
mech
lA Versatility
fittings in m e
fid
anical for glassfolding door e fi
Lear Windows and Door
12 COMPANY PROFILE
Our Facilities:
Tempering Facility
13 COMPANY PROFILE
Lear Fabrication Facility
Powder-Coating Facility
14 COMPANY PROFILE
Key Projects:
Completed
15 COMPANY PROFILE
Century City, Milano
16 COMPANY PROFILE
Luxent Hotel
ON-GOING
17 COMPANY PROFILE
Manila Bay Resort
18 COMPANY PROFILE