Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Página 1 de 2
Fechar o SIS
Tela anterior
i01175985
Data Link
SMCS - 4490; 7451
Illustration 1 g00490405
Connection Points For The Data Link
ote: These descriptions are for the EMCP II+ for applications with the EUI.
There are four serial data links. The preceding illustration shows the connection points at the GSC+.
https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw... 31/08/2010
Pesquisa de Mídia - RENR1200 - Electronic Modular Control Panel II+ (EMCP II+... Página 2 de 2
The data links provide the means for the GSC+ in order to communicate with other devices. The data
links are defined in the following list:
ALM Data Out - This serial data link is a single directional link. The GSC+ uses this data link for
one-way communication with the optional Alarm Modules (ALM) or with the optional Customer
Interface Module (CIM). The data link for the ALM consists of a single wire that connects the GSC+
(connector contact 35) to an ALM or CIM. A return connection between the GSC+ and the module is
also required. For more information, see Systems Operation, "Alarm Modules" or Systems
Operation, "Customer Interface Module".
RDM Data Out - This serial data link is a single directional link. The GSC+ uses this data link for
one-way communication with the optional Relay Driver Module (RDM). The RDM data link
consists of a single wire that connects the GSC+ (connector contact 30) to the RDM. A return
connection between the GSC+ and the module is also required. An RDM is used in conjunction with
the optional Customer Communication Module (CCM). For more information, see Systems
Operation, "Relay Driver Module".
CAT Data Link (ECM) - This serial data link is bidirectional. The GSC+ uses this data link for
two-way communication with the engine ECM. The CAT data link consists of a cable that connects
the GSC+ (connector contacts 19 and 20) to the engine ECM. The GSC+ expects to receive the data
from the engine ECM on these pins.
Customer Communication Module (CCM) Data Link - This data link is also bidirectional and the
data link connects the GSC+ to the Customer Communication Module (CCM). The second CAT data
link allows eight generator set controls to be connected. The GSC+ expects to receive data from the
CCM on these pins.
Direitos Autorais 1993 - 2010 Caterpillar Inc. Tue Aug 31 15:41:11 UTC-0300 2010
Todos os Direitos Reservados.
Rede Particular Para Licenciados SIS.
https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw... 31/08/2010