14EC405: NETWRORK ANALYSIS AND SYNTHESIS MAX. MARKS: 10 marks CLASS: 2/4 B.Tech ECE (A,B&C) DATE: 08/03/2019 TIME: 40MIN *************************************************************************************** 1 (a) Derive the design equations for m-derived Band pass Filter. 5M (b) Design m-derived T section Low pass filter to work into load of 500Ω and cutoff 5M frequency at 4KHz and peak attenuation at 4.5KHz. 2 (a) Design a composite high pass filter to operate into a load of 600 Ω and have a cutoff 5M frequency of 1.2KHz with f∞ = 1.1KHz. (b) Discuss about terminating half sections both T and π sections. 5M 3 (a) Derive the design equations of symmetrical T and π attenuators. 5M (b) Design an asymmetrical T attenuator so that it works between a source and load 5M impedance of 260Ω and 490 Ω respectively and provides an attenuation of 40dB. 4 (a) Derive the design equations of symmetrical L attenuator. 5M (b) Design a bridged T attenuator having a load resistance of 500 Ω and attenuation of 5M 40dB. 5 (a) Design a Lattice attenuator having a load resistance of 300 Ω and attenuation of 5M 60dB. (b) Design an asymmetrical π attenuator so that it works between a source and load 5M impedance of 260Ω and 490 Ω respectively and provides an attenuation of 40dB. 6 (a) Define attenuator. What is attenuation? Differentiate symmetrical and 5M asymmetrical attenuators. (b) Derive the design equations for m derived T and π sections. 5M 7 (a) Derive design equations for L-type Asymmetrical attenuator. 5M (b) If the ratio of R1& R2 of a symmetrical network is 1/4. Find the ratio of input to 5M output current. Also calculate the attenuation in dB. 8 (a) Derive design equations for Lattice symmetrical attenuator. 5M (b) Design a symmetrical T-attenuator offers 5dB attenuation when the load is 450 Ω. 5M 9 (a) Derive the design equations for symmetrical bridge T-type attenuator. 5M (b) Design bridge T attenuator that offers 650 Ω at 45dB attenuation. 5M 10 (a) Derive design equations for T-type Asymmetrical attenuator 5M (b) Design a T-type Asymmetrical attenuator between the source and load impedance 5M of 260 Ω and 490 Ω, attenuation of 40dB.