Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
5i-M/M-ESLS
Model: ADU451821
Electrical Properties
790 - 960 1710 - 2180
Frequency range (MHz)
790 - 862 824 - 894 880 - 960 1710 - 1880 1850 - 1990 1920 - 2180
Polarization +45° , -45°
Electrical downtilt (°) 0 - 10 , continuously adjustable 0 - 8 , continuously adjustable
0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 4° 8° 0° 4° 8° 0° 4° 8°
Gain (dBi)
16.6 16.7 16.5 16.9 17.0 16.8 17.0 17.2 16.9 18.1 18.4 18.0 18.3 18.5 18.2 18.3 18.5 18.0
Side lobe suppression (Typ.) (dB) 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 4° 8° 0° 4° 8° 0° 4° 8°
-for first side lobe above main beam 19 19 18 19 19 18 19 18 17 18 16 18 20 16 18 20 16 18
-within 0° - 15° sector above horizon 15 16 15 15 16 15 15 16 15 16 16 15 16 16 15 16 16 15
Horizontal 3dB beam width (°) 69 66 65 64 62 60
Vertical 3dB beam width (°) 8.4 8.0 7.5 5.2 4.9 4.6
VSWR < 1.5
Intra-system: ≥ 30
Isolation between ports (dB)
Inter-system (790 - 960 // 1710 - 2180 MHz): ≥ 40
Front to back ratio, copolar (dB) Typ. 28 Typ. 29
0° Typ. 30 Typ. 20
Cross polar ratio (dB)
±60° Typ. 10 Typ. 10
Max. power per input (W) 500 (at 50℃ ambient temperature) 300 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Squint (°) Avg. 2.5
Tracking (dB) Avg. 1.0 (within 10dB HBW)
Impedance (Ω) 50
Grounding DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2535 x 259 x 135
Packing dimensions (H x W x D) (mm) 2815 x 305 x 190
Antenna weight (kg) 21.6
Clamps weight (kg) 3.0 (2 units)
Antenna packing weight (kg) 31.5 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) -55 .. +65
Frontal: 910 (at 150 km/h)
Wind load (N) Lateral: 470 (at 150 km/h)
Rear side: 1200 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 4 x 7/16 DIN Female
Connector position Bottom
Accessories
Item Model Description Weight Units per antenna
1
DXX-790-960/1710-2180-65/65-17.5i/18.5i-M/M-ESLS
Model: ADU451821
56
55 70 Unit: mm
NOTE
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to
requirements described in the antenna installation guide.
Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
Any previous datasheet issues become invalid. 2 Issue: 2015-11-05