Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
I Description Rate Per Sample Total Amount Qty Required Turn Around Time
3 Soil Penetration Test:Soil SBC Including Labaoratry Tests as per the Area & Client Requirements
1 of 6
E Division Physical and Chemical Properties of Reinforcement Steel
Rate Per
I Description Qty Required Turn Around Time
Diameter
Test on Reinforcement Steel Physical
1 70cm,40cm,30cm 1200
Properties (Tensile, Bend, Rebend)
&10 Each 3
03-04 working days
no's(Totally 12
Test on Reinforcement Steel Chemical
2 Pieces per dia) 1050
Properties (C, S, P)
4 Ph value
Rate Per
I Description Sample /Item Turn Around Time
(Rs.)
2 of 6
J Division Cement & Flyash
1 Chloride
900 10 kg 2-3 days
2 Sulphate
3 of 6
N Division Chemical Properties of Fine Aggregate
Coarse Aggregate - 10mm, 12.5mm,
II Rate Per sample Qty Required Turn Around Time
20mm, 40mm
1 Chloride
900 10 kg 2-3 days
2 Sulphate
3 Proctor Density (MDD & OMC) 1000 3-4 working days / 25 kg of sample
3200
required
4 Impact Value 450
Flakiness and
4 600 4450 50kg 3-4 working days
Elongation Index
5 Soundness 1000
Flakiness and
3 600 3350 50kg 3-4 working days
Elongation Index
4 of 6
R Division Solid Blocks
Rate Per Sample
I Description Qty Required Turn Around time
/Item (Rs.)
1 Compressive Strength 320 8 no's
3 Suitability for Drinking with Micro Biological 3000 2 lit 7-8 working days
2 Density 450
5 Ph 450
6 Sand Content 450
X Division Wood Sample
I Description Rate Per Sample Qty Required Turn Around Time
Fluxural Strength
/Item (Rs.)
1 650
50cm-03 no's 3-4 Working days
2 Moistrue Content 400
Y Division Tiles
I Description Rate Per Sample Qty Required Turn Around Time
1 Concrete Strength /Item (Rs.)
600 10 no's
3-4 Working days
2 Water Absorption 400 10 no's
5 of 6
Z Division Vertified Tiles
Vertified Tiles Per Sample Qty Required Turn Around Time
1 Dimension on tiles 765
2 Water Absorption of tiles 250
3 Straightness of tiles 150
4 Rectangularity on tiles 150
5 Warpage of tiles 280
6 Grassing Resistance of Tiles 150 12-15 no's 11-12 Working days
7 Modulus of Ruputure 250
8 Scratch Hardness 250
9 Impact value of Tiles 850
10 Abrasive 600
11 Chemical resistance of tiles 600
A1 Division Ply Wood
Turn Round Time/Sample
Ply Wood Per Sample
Requirement
1 Moisture Content 600
2 Glue adhesion in dry state 1400
3 Resistance to water test 1350 5800 11-12 Working days/Full Board Required
4 Tensile Strength 1250
5 Static and wet bending strength 1200
B1 Division GGBS
GGBS Per Sample Qty Required Turn Around Time
1 Fineness (M2/Kg)
2 Insoluable Residue(%)
3 Magnesia content(%)
4 Sulphide Sulphur(%)
5 Sulphate content as SO3(%)
6 Loss on Ignition (%)
7 Manganese content(%)
4200 25 kg 7-8 Working days
8 Chloride content(%)
9 Glass content(%)
10 Moisture Content
Chemical Modulus
A.CaO+MgO+SiO2
11
B.CaO+MgO/SiO2
C.CaO/SiO2
6 of 6