Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
IT6300
Features
Drain port allows draining or venting of downstream line when valve is in the off position Full port Virgin PTFE valve seats are standard. Suitable for a full range of liquids and gases. Consult factory for specific applications Ball is wiped clean during each operation of the valve Blow-out proof, pressure retaining stem Vinyl insulator on heavy duty handles Fast, quarter-turn open or close operation Low operating torque Adjustable stem packing gland
IS6301
Models
IT6300 IS6301
1 1
*This valve is designed to be soft soldered into lines without disassembly using
low temperature solder (420F, 216C). Other solders, such as 95/5 tin antimony (460F, 238C) or 96/4 tin silver (430F, 221C), can be used. However, extreme caution must be used to prevent seat damage. Higher temperature solders will damage the seat material. ANSI B16.18 states that the maximum operating pressure of 50-50 solder connection is 200psi (14 bars) at 100F (38C) and decreases with higher temperatures. Apply heat with the flame directed AWAY from the center of the valve body. Excessive heat can harm the seats. After soldering, the packing nut may have to be tightened.
/2" 1" (15 25mm) threaded NPT end connections /2" 1" (15 25mm) solder end connections*
Specifications
A 2-piece, full port, ball and waste brass ball valve shall be installed as indicated on the plans. The valve shall have a side drain port to drain or vent downstream line when valve is in the off position. Valve shall have blow-out proof stems, virgin PTFE seats and full port. Valve shall be pressure rated at 600psi (41 bars) WOG non-shock. Valve shall be a Watts Regulator Company Series IT6300 (threaded) or IS6301 (solder).
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Materials
Pressure Temperature
Temperature Range: 0F 350F ( 18C 176C) Maximum Working Pressure: 600psi (41 bars) WOG non-shock
A B
C K D
E F
A B C D E F G H I J K L
Handle Nut Handle Packing Nut Stem Packing Stem Body Seats Ball Adapter Seal Cap
Brass Zinc Plated Carbon Steel with Vinyl Insulator Brass PTFE Brass Forged Brass PTFE Brass Brass NBR Brass
Pressure
Temperature
Dimensions Weights
E
C
Threaded Ends
SIZE (DN) A in.
1
C1 Solder Ends
DIMENSIONS B mm in. mm in. C mm in. C1 mm in. D mm in. E mm
mm
in.
1
2 3 4 1
15 20 25
2 3 4
15 20 25
1
1316 138
25 30 35
2
2 716
51 62 80
54 74 90
1916 2 2 316
39 51 55
3 516 4 58 4 58
84 118 118
.5 .9 1.4
.2 .4 .6
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca Watts Regulator Company, 2007
ES-IT/IS-6300 0724