Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Series B6400-SE
Sizes: 14" 2" (8 50mm)
B6400-SE
BAA/ARRA Compliant*
*This product complies with the Buy American Act and The American Recovery and Reinvestment Act. For more information, visit watts.com.
Features
Valve body and ball are drilled to provide vent for relieving air pressure downstream. In the closed or off position, the B6400-SE provides continuous air relief on the downstream side of the valve. Ideal for use where protection of machine tools is critical Actuator mounting pads Virgin PTFE valve seats are standard Pressure rated at 175psi (12 bars) Chrome plated brass ball is wiped clean during each operation of the valve Minimal pressure drop due to large ports Blowout proof, pressure retaining stem Vinyl insulator on heavy duty, zinc-plated, carbon steel handles Low operating torque Adjustable stem packing gland Each valve factory tested Valve is unidirectional due to body hole on downstream, with body flow directional arrow
OPEN
Compressor Side Upstream Pressure Tool Side Downstream
CLOSED
Compressor Side Tool Side Exhaust
Options
Suffix LL LC OV RH Latch-Lok handle to lock in open or closed position Latch-Lok handle to lock in closed position only High profile safety oval handle Round handle
Specifications
A 2-piece standard port bronze safety exhaust ball valve to be installed as indicated on the plans. Valve shall have ASTM B584 bronze body, chrome plated ASTM B16 brass ball, ASTM B16 brass blowout proof stem, virgin PTFE seats, PTFE stem packing, PTFE stem thrust bearing, and adjustable packing nut. Top loaded stems or valves without adjustable packing are not acceptable. Pressure rating no less than 175psi (12 bars). Valve shall be a Watts Regulator Company Series B6400-SE.
Pressure Temperature
Temperature Range: 50F 120F (10C 49C) Maximum Working Pressure: 175psi (12 bars)
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Materials
A B C D Pressure
4",
G E F
H I H J
A B C D E F G H I J
Handle Nut Handle Packing Nut Stem Packing Thrust Washer Stem Body Seats Ball Adapter
Zinc Plated Carbon Steel Zinc Plated Carbon Steel with Vinyl Insulator Brass ASTM B16, C36000 PTFE PTFE Brass ASTM B16, C36000 Bronze ASTM B584, C84400 Virgin PTFE Chrome Plated Brass ASTM B16, C36000 Brass ASTM B16, C36000
2"
4"
10 8 6 4 3 2 38 30 23 15 11 8
SIZE DN in. mm
100 80 60 40 30 20
gpm 2000
lpm 7600
Flow
Dimensions Weights
H
C I E L F1 F Panel/Actuator Hole F - 14" 1" (8 25) 10 24 UNC Threads F1 - 114" 2" (32 50mm) 14" 20 UNC Threads
SIZE (DN) C Center to Handle in. mm E Radius of Center to End in. mm DIMENSIONS H End to End mm
12 34 1 114 112 2
38
14
8 10 15 20 25 32 40 50
in.
mm
in.
in.
38 38
12 34 1 114 112 2
38
14
8 10 15 20 25 32 40 50
38
1 16
34
1 16
USA: No. Andover, MA Tel. (978) 688-1811 Fax: (978) 794-1848 www.watts.com Canada: Burlington, ONT. Tel. (905) 332-4090 Fax: (905) 332-7068 www.wattscanada.ca
ES-B6400-SE 1038
2010 Watts