Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1 General information
Cable assembly designed for SDH modem, consist of a two RJ45 plugs and a
screened 100 Ω pair cable (4x2x0.25).
2 Design
Lenght L, see §10 Product list.
Lenght tolerance acc. to 1030-TSR 101+ Uen.
Connector A Connector B
50 L
3 2 4 3
Figure 1
PRODUCT SPECIFICATION 2 (4)
Prepared (also subject responsible if other) No.
3 Item list
Item Title Product number Quantity
1 Modular-Plug 8/8 shielded RPV 204 01/6 2
2 Cable TEL 301 6007/004 =
3 Marking sleeve SVK 135 04/2 * 2
4 Marking sleeve SVK 135 04/2 ** 1
*) Marking sleeve for adress marking, XPIC. Other supplier/parts with same
properties can be used.
**) Marking sleeve with Ericsson product number and manufacturing date,
YYWW. Other supplier/parts with same properties can be used.
4 Wiring diagram
Figure 2
PRODUCT SPECIFICATION 3 (4)
Prepared (also subject responsible if other) No.
5 Requirement specification
See quality requirements 1058-TSR 101+ Uen.
All included parts shall be free from Ericsson banned and restricted substances
according to document 03401-2294 Uen
7 Test
The connector cable shall undergo a testing schedule
acc. to ERA/R 1524-RPM+ Uen
9 References
1030-TSR 101+ Uen Tolerance spec
1301-SDD 510 911 Uen Product spec
1058-TSR 101+ Uen Requirement specification
ERA/R 1524-RPM+ Uen Test instruction
125 23-LXE 107 268 Uen Packaging Instructions
102 01-1003 Uen Marking Instructions
PRODUCT SPECIFICATION 4 (4)
Prepared (also subject responsible if other) No.
10 Product list
Product code Figure Length [mm]
RPM 517 551/01 1, 2 320 +/-5
11 Revision record
Revison Description
B Para 2. Drawing changed
Para 3. Modular plug and cable canged in item list.