Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
foo
1. Introduction
1.1 Scope
These release notes summarize the operational requirements and known issues for the
following 3Com Baseline Switch 2948-SFP Plus software release.
To obtain the latest technical information for your Switch, including a list of known
problems and solutions, visit the 3Com Knowledgebase:
http://knowledgebase.3Com.com
Please note that the flow control will work for all 48 ports in full duplex mode which is the
typical scenario.
3.2 ARP
Static ARP entry is lost after reboot the switch in earlier versions of code. This has been
fixed in this release.
3.3 ACL
• ACL web page display error for “Any” radio button for mac address range and
mask. Settings on create page were not being displayed on the mdofiy page.
This is now fixed.
• ACL help web page display error format for MAC Address format, and VLAN ID
range. This has been corrected on the help page.
4. Upgrading Software
For instructions on how to upgrade the Switch to this firmware version, please refer to
the 3Com Baseline Switch 2948-SFP Plus User Guide (part number 10016089-AA).
3Com Baseline Switch 2948-SFP Plus (3CBLSG48) v01.00.09 Release Notes
Page 3 of 3
5. Additional Information
5.1 Backing up Configuration Files
Please note that prior to backing up configuration information, you must select Save
Configuration on the web interface. This saves the current “running configuration” to the
switch’s internal non-volatile memory. This applies regardless of web browser being
used.