Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
C O N T E N T S
Features B8-2
Structure & Accessories B8-6
Rating & Specification B8-8
Application & Selection / Characteristics B8-10
Ordering Information & Dimension B8-12
Dimension B8-14
Control Circuit Diagram B8-20
Certificates B8-29
Vacuum Contactor Switch _ Feature
Fixed Type
VITZRO TECH Vacuum Contact Switch is a miniature, high-performance HV VCS. It is highly reliable and stable and easy to
use. There are 2 types fixed excitation mode and instantaneous excitation mode that do not require maintenance. It is a switch
for high voltage motor, transformer and condenser circuits and it contributed greatly to the modernization and simplification of
the equipment.
B8-2 VITZROTECH
Its performance was recognized through technology integration and
international standard certificates. B8
It is a product with the maximum short circuit capacity conforming to the
B8-4 VITZROTECH
Standard Draw-Out Type
It is compatible with draw-out type power fuse. B8
It can be installed with up to 2 potential transformers.
Power fuse
Protective cover
Fuse check
Molded case
Potential transformer(inside)
Counter
Control circuit connector
Draw-out grip
Grounding contact
Stopper pin
Bus
Barrier
Draw-out unit
Guide rail
Earth
B8-6 VITZROTECH
Vacuum Contact Switch
Our VCS performs the short circuit protection at the power fuse and the general load switching is performed
Accessories at high-voltage VCS. It is an optimal product as a combination starter. It can install up to 2 short-circuit
potential transformers and it is fully equipped with the draw-out unit.
Standard Accessories
Item Name Quantity Purpose Remarks
Mounted when it is an
Manual Closing Handle 1ea/set For manual closing
instantaneous excitation mod
Control Circuit Connec
1ea/set For power connection Standard Product1.5m
ting Cable
The following accessories are supplied based on the requirements of the demanding part.
B8
Item Name Specification/Rating Remarks
Draw-Out Unit
7.2kV 5~250A40kA
Single-Phase full wave rectifier mounted
Silicon Rectifier(Si-Rf) For both AC100~220V with a surge absorber
Power Fuse Melting Detector Switch(1C contact) mounted Refer to connection diagram
Fixed Excitation Mode KVP-322E KVP-342E KVP-625E KVP-645E KVPD-322E KVPD-342E KVPD-625E KVPD-645E
Type
Instantaneous
Excitation Mode
KVP-322E KVS-342E KVS-625E KVS-645E KVSD-322E KVSD-342E KVSD-625E KVSD-645E
Rated Voltage kV 3.3 / 3.6 6.6 / 7.2 3.3 / 3.6 6.6 / 7.2
Rated Current A 200 400 200 400 200 400 200 400
Mode times
Mechanical Instantaneous 10,000
25 25
Excitation Mode times
10,000
Electrical 25 25
times
Closing Coil V DC, 24, 48/50, 100/110, 115/125, 200/220, 230/250, ***AC(Single phase)100/110, 200/220
Rated Voltage kV - - - - - - - -
(Note) (1) The impulse withstand voltage between phases of in-phase main circuit marked with * is 30kV.
(2) The impulse withstand voltage between phases of in-phase main circuit marked with ** is 45kV.
(3) When the operating voltage (single-phase AC) is marked as ***, a silicon rectifier should be installed on the VC.
(4) 2 operating and potential transformers can be installed on the draw-out type VC or VC with power fuse.
(5) The maximum weight is measured with 2 operating transformers installed and when the power fuse in the VC is the maximum rated current.
B8-8 VITZROTECH
Vacuum Contact Switch
Standard Type
fixed type of mechanical interlock installation
Power Fuse When not installed Power Fuse when installed
4 4 4
4 4 4
40 50 40 50 40 40 50 40 50
10 20 20 10 20
25 25 25
25 25 25
DC, 24, 48/50, 100/110, 115/125, 200/220, 230/250, ***AC(Single phase)100/110, 200/220
DC, 24, 48/50, 100/110, 115/125, 200/220, 230/250, ***AC(Single phase)100/110, 200/220
- - - - - - - - -
- - - - - - - - -
- - -
44 45 44 45 Max.52 45 47 45 47
VCS
VC
VTHF07010 10
VTHF07020 20
VTHF07040 40
VTHF07050 50
VTHF07063 63 50 4×In
VTHF07080 80 1.4
VTHF07100 100
VTHF07125 125
VTHF07200 200
B8-10 VITZROTECH
Vacuum Contact Switch
Closing:
IEC-470(1974) 250,000
10times
HV AC AC-4 - 1200 - 300 AC-3 Closing:6times
Breaking:
Contact Switch Breaking:1times
8times
Closing:
BS-775(1976) 250,000
10times
AC-4 10Class 1200 Class-3 300 AC-3 Closing:6times
Contact
Switch
Breaking:
Breaking:1times
B8
8times
Closing:
250,000
10times
VDE-660 AC-4 D1Class 1200 Class-3 300 AC-3 Closing:6times
Breaking:
Breaking:1times
8times
Applied to E1 Class
(Without Fuse)
NEMA-
ICS(1976) 2.5kV 17MVA
Part: ICS2- 5.0kV 35MVA 250,000
324 - 120 - 300 - Closing:6times
Industrial Applied to E2 Class Breaking:1times
control and (With Fuse)
systems 2.5kV 150MVA
5.0kV 350MVA
Breaking Capability
An arc time is always 0.5cycle or less. Rapid arc extinguishing and excellent insulation recovery are vital
characteristics.
Capacitor Bank Switching Capability
A Vacuum Valve performs an excellent breaking operation without re-ignition of arc at the capacitor
bank circuit that requires the closing/breaking at high recovery voltage and high frequency.
KV P 3 2 2 E 2
VITZRO HV Vacuum VCS
Contact Switch
Structure & Power Fuse Rated
Operation Mode Rated Voltage Rated Current
Breaking Current
Fixed Type Fixed 3 3300/3600V 2 200A
P 2 3.6kV 40kA(250MVA)
Excitation Mode
Fixed Type 6 6600/7200V 4 400A 5 7.2kV 40kA(500MVA)
S Instantaneous
Excitation Mode(Latch) 6 7.2kV 50kA(623MVA)
Standard Draw-Out
N Type Fixed Excitation
Short Circuit
Mode
Breaking Current
Standard Draw-Out
Type Instantaneous 2 3.3/3.6kV 4kA(24MVA)
R
Excitation Mode(Latch)
5 6.6/7.2kV 4kA(50MVA)
Fixed Mechanical
Interlock Mounting
PM
Type, Fixed Excitation
Mode
Fixed Mechanical
Interlock Mounting
SM Type, Instantaneous
Excitation Mode(Latch)
Individual Draw-Out
PD Type, Fixed Excitation
Mode
Individual Draw-Out
SD Type, Instantaneous
Excitation Mode
UVS D E 3 2 S Z
Draw-Out Unit for VCS
HV VCS Draw-Out Unit
B8-12 VITZROTECH
Vacuum Contact Switch
Fixed Type
Dimension
B8
Type Rated A B
KVPD. 322E
3300V 200A 4kA
KVSD. 322E
390 100
KVPD. 342E
3300V 400A 4kA
KVSD. 342E
KVPD. 625E
6600V 200A 4kA
KVSD. 625E
440 120
KVPD. 645E
6600V 400A 4kA
KVSD. 645E
Type Rated A B
KVN. 322E
3300V 200A 4kA
KVR. 322E
410 100
KVN. 342E
3300V 400A 4kA
KVR. 342E
KVN. 625E
6600V 200A 4kA
KVR. 625E
440 120
KVN. 645E
6600V 400A 4kA
KVR. 645E
Standard draw-out type with power fuse installed (Rated current of power fuse: 10-200A)
Type Rated A B
VVCI 625E-6 6600V 200A 4kA 440 120
B8-14 VITZROTECH
Vacuum Contact Switch
B8
형 식 정 격 A B Type Rated A B
VVCI 625E-6 6600V 200A 4kA 440 120 VVCI 625E-6 6600V 200A 4kA 440 55
Optional parts
① Position detector
② Surge absorber
Optional parts
① Position detector
② Surge absorber
B8-16 VITZROTECH
Vacuum Contact Switch
B8
Optional parts
① Position detector
② Surge absorber
Type Applied to VCS Type Applied to VCS Type Applied to VCS Type Applied to VCS
KVN. 322E KVN. 342E KVN. 625E KVN. 645E
UVSE 3-2SZ KVR. 322E UVSE 3-4SZ KVR. 342E UVSE 6-2SZ KVR. 625E UVSE 6-4SZ KVR. 645E
VVCI 625E-6 VVCI 625E-6 VVCI 625E-6 VVCI 625E-6
B8-18 VITZROTECH
Vacuum Contact Switch
B8
KVS-322E KVS-625E
KVS-342E KVS-645E
KVS-322E KVS-625E
KVS-342E KVS-645E
B8-20 VITZROTECH
Vacuum Contact Switch
B8
KVSD-322E KVSD-625E
KVSD-342E KVSD-645E
KVSD-322E KVSD-625E
KVSD-342E KVSD-645E
B8-22 VITZROTECH
Vacuum Contact Switch
B8
KVR-322E KVR-625E
KVR-342E KVR-645E
KVR-322E KVR-625E
KVR-342E KVR-645E
B8-24 VITZROTECH
Vacuum Contact Switch
VVCI-625E-6
B8
KVSM-322E KVSM-625E
KVSM-342E KVSM-645E
The connection of VC main circuit is the same as the normal excitation type
B8-26 VITZROTECH
Vacuum Contact Switch
KVPM-322E KVPM-625E
KVPM-342E KVPM-645E
B8
KVSM-322E KVSM-625E
KVSM-342E KVSM-645E
VCS High Voltage Vacuum Contact Switch Si-Rf Silicon Silicon Rectifier
High Voltage Vacuum Contact
VCS-F SA Surge Absorber
Switch for Power Failure
High Voltage Vacuum Contact
VCS-R Switch for Reverse Power F Fuse
MCH Protecting & Supporting Coil MCX Auxiliary Contact Switch for Closing
MC Auxiliary Switch
B8-28 VITZROTECH
Vacuum Contact Switch
B8