Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Facultad de ingenieria.
Programa ingenieria civil.
PANDEO ELASTICO.
G. FLOREZ , E. HERNANDEZ1, A. MARTINEZ1, L. ROJA1, L. MONROY1
1
W. RIVERA2.
1Estudiante de Ingeniería Civil, Facultad de ingeniería; Universidad de Cartagena, Cartagena de Indias D.T. y C.
2Profesor, Del Laboratorio De Resistencia De Maetriales, Facultad de Ingenieria, Programa de Ingenieria Civil,
Universidad de Cartagena.
Recibido 27 de mayo de 2019; Aceptado 27 de Mayo de 2019.
Resumen.
Abstract
In the following laboratory practice, the objective was to study and understand the phenome-
non of buckling in columns, a type of failure that occurs without prior notice and therefore it
must be paid close attention. To evaluate them and their different ways in which they are
presented, we used a device that allowed us to use a steel sheet and simulate that it was
restricted by different types of supports. After trying different possibilities with the resources
we had at hand and realizing that this sheet actually behaved as dictated by the theory, we
proceeded to draw conclusions.
II. Objetivos
2
Resistencia De Materiales.
IV. Procedimiento
3
Pandeo Elastico.
𝐸 = 22.74 𝐺𝑃𝑎
ℎ𝑏 3
𝐼= (5.3)
12
4
Resistencia De Materiales.
(0.202)2 (55𝑁)
𝐸 =
𝜋 2 (7.27𝑥10−12 𝑚4 )