Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Previous Screen
Welcome: q661wi
Product: POWER MODULE
Model: PM3516 POWER MODULE NBR
Configuration: PM3516 3516B Power Module NBR00001UP
Specifications
3500B Engines for Caterpillar Built Power Modules
Media Number RENR492704 Publication Date 01/04/2014 Date Updated 15/04/2014
i06167059
Engine Oil Pump
SMCS 1304
Part Number 1069872
S/N NBR1UP
Part Number
S/N BPD1UP
Part Number
S/N 1HZ1UP
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sis… 1/3
12/21/2016 PM3516 3516B Power Module NBR00001UP(SEBP5738 25) Documentation
Illustration 1 g03836625
Table 1
Specification for the 1069872 Engine Oil Pump Gp
Item Qty Part Specification Description
Length of the new gear is 110.000 ± 0.015 mm
(4.3307 ± 0.0006 inch).
1 2 1069866 Gear
Depth of the bore in the oil pump body for the new gear is
110.15 ± 0.02 mm (4.337 ± 0.001 inch).
Diameter of the 1069865 Idler Shaft is 31.742 ± 0.008 mm
(1.2497 ± 0.0003 inch).
1069867 Idler Shaft Distance (B) from the end of the shaft to the gear face is
2 2
Assembly 34.0 ± 0.5 mm (1.34 ± 0.02 inch).
Bore in the bushing for idler shaft assembly is 31.811 ± 0.013 mm
(1.2524 ± 0.0005 inch).
Length under test force is 107.16 mm (4.219 inch).
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sis… 2/3
12/21/2016 PM3516 3516B Power Module NBR00001UP(SEBP5738 25) Documentation
3 1 1077175 Spring Test force is 555.6 ± 20.0 N (124.9 ± 4.5 lb).
Free length after test is 144.5 mm (5.69 inch).
Diameter of the new 1069868 Shaft is 31.742 ± 0.008 mm
(1.2497 ± 0.0003 inch).
1069869 Oil Pump Bore in the bushing for oil pump drive shaft assembly is
4 1
Drive Shaft As 31.811 ± 0.013 mm (1.2524 ± 0.0005 inch).
Distance (C) from the end of the shaft to the gear face is
47.0 ± 0.5 mm (1.85 ± 0.02 inch).
5 1 2986387 ORing Seal Lubricate the bore lightly with the fluid that is being sealed.
Installation depth is 1.5 ± 0.5 mm (0.06 ± 0.02 inch).
6 6 7W0060 Bushing Position of bushing joints from the centerline through the bearing
bores is 45 ± 15 degrees.
4M3248 Hollow Extension of the hollow dowel from the oil pump cover is
F 2
Dowel 6.0 ± 0.5 mm (0.24 ± 0.02 inch).
Extension of the dowel from the oil pump cover is 6.0 ± 1.0 mm
G 2 7N2043 Dowel
(0.24 ± 0.04 inch).
The rotation of the drive gear is clockwise when you view the engine oil pump from the drive end.
Before you install the pump, lubricate the moving parts with clean engine oil. Rotate the pump by hand in
order to ensure that the pump rotates freely.
Copyright 1993 2016 Caterpillar Inc. Wed Dec 21 2016 10:54:08 GMT+0400 (Arabian Standard Time)
All Rights Reserved.
q661wi
Private Network For SIS Licensees.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sis… 3/3