Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Home LCD LCD Panel Scan system Drivers "High-Voltage Level-Shifting" POPULAR POSTS
LCD Panel Scan system Drivers "High-Voltage Level-Shifting" Voltage-Supply (Voltage Display/LCD
panel)
LCD monochrome only need voltage
4:10 PM / Topi Dea / LCD, regulator ON, OFF course and intensity
which means only need 3 voltage
The workings of the Scan-Driver panel there are several kinds. One of these was used by conditions, i.e. the voltage ON, OFF...
Samsung Panel called the "High-Voltage Level-Shifting".
Timing Control (T-CON) LCD TV
Generally, data output of the mainboard on
How to get pulsa2 drive, CKVB, CKV STVP can be understood with an example block diagram TV/LCD Monitor has a level LVDS (Low-
voltage Differential Signaling) data series.
as shown below. Pulse-pulse CKV, CKVB, STVP used as pulse "Row driver" or also called "Gate The word differ...
– driver".
Regular/conventional Panel
(Row/Gate drivers and Driver Column)
Conventional LCD Viewer consists of a
panel of liquid crystal matrix, row drivers
(often called ear, because the shape of COF
or embedded) a...
http://tvrepairsolution.blogspot.in/2016/04/lcd-panel-scan-system-drivers-high.html 1/4
10/21/2017 LCD Panel Scan system Drivers "High-Voltage Level-Shifting" | TV Problems and Repair Solutions
Pulse-pulse CKV, CKVB, STVP, formed from the pulse-pulse STV and CPV.
Pulse-pulse CKV, CKVB, STVP has high voltage level of about 35-40v, and got positive
suply of VGH (Von) and negative suply of VGL (Voff).
Pulse-pulse CKV, CKVB, STVP from scan-driver ic broken into 2 lines. One line goes into
the panel through the left side, and the other through the right side.
Loss of pulse-pulse CKV, CKVB, STVP (due to short, line break up, or loss of voltage,
VGH-VGL) on both sides will lead to a blank screen-no osd, whereas if only one side of
the break up is usually the image still persists.
High-voltge Shift-Registers on the Row-driver in the glass panel is sometimes damaged and
result in impaired "double vertical picture". If only one side is sometimes damaged panels can
still be repaired with break lines, CKVB, CKV STVP everything, or sometimes simply just one of
the lines on the side of the damaged area. but this does not guarantee 100% will have to do.
Related Articles :
http://tvrepairsolution.blogspot.in/2016/04/lcd-panel-scan-system-drivers-high.html 2/4
10/21/2017 LCD Panel Scan system Drivers "High-Voltage Level-Shifting" | TV Problems and Repair Solutions
Nandu said...
Very nice.
August 4, 2016 at 9:58 AM
Nandu said...
Very nice.
August 4, 2016 at 9:59 AM
Basha Sk said...
Nice
October 30, 2016 at 9:06 PM
Basha Sk said...
Nice
October 30, 2016 at 9:06 PM
Unknown said...
Nice
June 18, 2017 at 12:40 PM
Thanks sir
September 22, 2017 at 10:04 AM
Thanks sir
September 22, 2017 at 10:04 AM
Post a Comment
http://tvrepairsolution.blogspot.in/2016/04/lcd-panel-scan-system-drivers-high.html 3/4
10/21/2017 LCD Panel Scan system Drivers "High-Voltage Level-Shifting" | TV Problems and Repair Solutions
Copyright © TV Problems and Repair Solutions. All Right Reserved. Designed By Templatoid - Powered By Blogger
http://tvrepairsolution.blogspot.in/2016/04/lcd-panel-scan-system-drivers-high.html 4/4