Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
Tel : (33) 5 61 93 33 33
Telex : AIRBU 530526F
Fax : (33) 5 61 93 42 51
ATA SYSTEM: 23
ADDITIONAL WORK
**CONF ALL
No additional work is required by this revision for aircraft modified by any previous issue.
REASON
Revision No. 01 issued to add the procedure to load and install Satellite Data Unit (SDU) by floppy disk.
CHANGES
- Effectivity updated
FRONT MATTER
COMMUNICATIONS - SATELLITE CONFIGURATION UPDATED R
COMMUNICATION - INSTALL HIGH
SPEED DATA UNIT (HSDU) AND
SATELLITE DATA UNIT (SDU) SBB
STANDARD MOD C.
SUMMARY
REASON/DESCRIPTION/OPERATIONAL REASON UPDATED R
CONSEQUENCES
MATERIAL INFORMATION
MATERIAL - PRICE AND AVAILABILITY
Procurement Addresses PROCUREMENT ADDRESSES UPDATED R
MATERIAL SET UPDATED
Price and Availability PRICE AND AVAILABILITY UPDATED R
MATERIAL SET UPDATED
INDUSTRY SUPPORT INFORMATION INDUSTRY SUPPORT INFORMATION UPDATED R
LIST OF MATERIALS - OPERATOR
SUPPLIED
Equipment EQUIPMENT UPDATED R
Equipement BFEA01 PART MATERIAL SET UPDATED R
NOTE UPDATED
PART NUMBER UPDATED
Equipement BFEA02 PART MATERIAL SET UPDATED R
NOTE UPDATED
KEYWORD UPDATED
PART NUMBER UPDATED
QUANTITY UPDATED
Equipement BFEA03 PART MATERIAL SET UPDATED R
NOTE UPDATED
PART NUMBER UPDATED
Equipement BFEA04 PART MATERIAL SET UPDATED R
NOTE UPDATED
KEYWORD UPDATED
PART NUMBER UPDATED
QUANTITY UPDATED
Equipement BFEA05 PART MATERIAL SET UPDATED R
NOTE UPDATED
KEYWORD UPDATED
PART NUMBER UPDATED
QUANTITY UPDATED
Equipement BFEA08 PART MATERIAL SET UPDATED R
NOTE UPDATED
KEYWORD UPDATED
PART NUMBER UPDATED
QUANTITY UPDATED
Equipement BFEA09 PART MATERIAL SET ADDED N
TOOLING
Tools TOOLS UPDATED R
ACCOMPLISHMENT INSTRUCTIONS
TASK 233367- 831-802-001-Modification TASK SOLUTION UPDATED R
of the SDU (FIN 5RV1) in accordance with NOTE UPDATED
VSB on Bench
FILING INSTRUCTIONS
This Service Bulletin has been generated electronically and is reissued as a complete document.
Replace the complete document.
No previous revision
REVISION SEQUENCE
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
Tel : (33) 5 61 93 33 33
Telex : AIRBU 530526F
Fax : (33) 5 61 93 42 51
This summary is for information only and is not approved for modification of the aircraft.
ATA SYSTEM: 23
MODIFICATIONS
MODIFICATION CLASSIFICATION
MAJOR None
MINOR 204338S32712 204339S32713 204453S33250
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting the
airworthiness of the product. All other changes are major changes.
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
A new enhanced standard "MOD C" of Satellite Data Unit (SDU) and High Speed Data Unit (HSDU)
Swift Broad Band (SBB) capable provided by HONEYWELL has been developed.
This new standard SBB MOD C SATCOM is proposed in replacement of SBB MOD B and is a software
modification only.
The SDU embedded software is now managed in configuration and identified as below:
The new management of SDU software requires the installation of MEDIA in the cockpit as identified
below:
This Service Bulletin is published to advise all operators of Long Range aircraft of the issue of
HONEYWELL Service Bulletin No. 7516118-23-0025 (for SDU conversion) and Service Bulletin No.
7520061-23-0009 (for HSDU conversion).
- Upgrading the existing HSDU and SDU software by a new HSDU "MOC C" SBB software on
Aircraft or on bench with HONEYWELL Service Bulletin or AMM,
or
- replacement of HSDU hardware (FIN 63RV1) and SDU hardware (FIN 5RV1) by new hardware
with SBB MOD C software loaded.
Accomplishment of this Service Bulletin will introduce new standard SBB "MOD C" SATCOM with
following improvements:
- EPR correction (involving SDU reset during flight, channel card deregistration, satellite In-Lock
wrong status, ...),
- Corrections of issues "Tx blocked", and "Backoff failure" raised following SBB "MOD B" entry into
service monitoring,
GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE RECOMMENDED (1) CANCELS INSPECTION SB NO
POTENTIAL AD NO A/C OPERATION AFFECTED NO
RELIABILITY AFFECTED YES PAX COMFORT AFFECTED NO
COST SAVING NO ETOPS AFFECTED NO
STRUCTURAL LIFE EXTN NO VENDOR SB INVOLVED YES
**CONF 001
**CONF 002
**CONF 003
**CONF 004
EFFECTIVITY
**CONF ALL
43P AAW AEA AFL AVA AZA BEL CBJ CCA CES CHH CRK CSN
ETD FIN GIA HAL IRA KLM LAA MAS MAU MNB MSR NMB OMA
ONE P2C PAL PLM QTR RSY SVA TAP TCX THA THY TOW TPA
TSC UAF VIR WOW XAX XLF
CONCURRENT REQUIREMENTS
None
REFERENCES / REPERCUSSIONS
TFU None
OEB None
AOT None
SIL None
ISI None
LINE MAINTENANCE AFFECTED No
LIFE LIMIT None
OTHER None
AIRCRAFT NO
EQUIPMENT YES
HARD YES
SOFT YES
OBRM NO
MANPOWER
**CONF 001
Task 233367-831-802-001: Modification of the SDU (FIN 5RV1) in accordance with VSB on
Bench
TOTAL MANHOURS 2.50
ELAPSED TIME (HOURS) 2.50
Task 233367-831-806-001: Modification of the HSDU (FIN 63RV1) in accordance with VSB on
Bench
TOTAL MANHOURS 1.75
ELAPSED TIME (HOURS) 1.75
Task 233367-831-805-001: Modification of the HSDU (FIN 63RV1) in accordance with VSB on
Aircraft
TOTAL MANHOURS 1.25
ELAPSED TIME (HOURS) 1.25
**CONF 002
Task 233367-831-802-001: Modification of the SDU (FIN 5RV1) in accordance with VSB on
Bench
TOTAL MANHOURS 2.50
ELAPSED TIME (HOURS) 2.50
Task 233367-831-806-001: Modification of the HSDU (FIN 63RV1) in accordance with VSB on
Bench
TOTAL MANHOURS 1.75
ELAPSED TIME (HOURS) 1.75
Task 233367-831-805-001: Modification of the HSDU (FIN 63RV1) in accordance with VSB on
Aircraft
TOTAL MANHOURS 1.25
ELAPSED TIME (HOURS) 1.25
**CONF 003
Task 233367-831-802-001: Modification of the SDU (FIN 5RV1) in accordance with VSB on
Bench
TOTAL MANHOURS 2.50
ELAPSED TIME (HOURS) 2.50
Task 233367-831-802-001: Modification of the SDU (FIN 5RV1) in accordance with VSB on
Bench
Modify the SDU (FIN 5RV1) in accordance with VSB on HONEYWELL Service Bulletin No.
Bench 7516118-23-0025
**CONF 004
Task 233367-831-802-001: Modification of the SDU (FIN 5RV1) in accordance with VSB on
Bench
TOTAL MANHOURS 2.50
ELAPSED TIME (HOURS) 2.50
APPENDICES
**CONF ALL
**CONF ALL
Z210
B
FR20
FR17
FR11 Z120
FR10 5RV1
63RV1
5RVMD1
5RVMD2
A
800VU
G_SB_233367_5_SAAA_01_00
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
Tel : (33) 5 61 93 33 33
Telex : AIRBU 530526F
Fax : (33) 5 61 93 42 51
ATA SYSTEM: 23
1. PLANNING INFORMATION
**CONF ALL
A. EFFECTIVITY
NOTE: This Service Bulletin is only applicable to aircraft on which MOD No.
201201S31588 (Service Bulletin No. A330-23-3282 or Service Bulletin
No. A330-23-3330 or Service Bulletin No. A330-23-3337) or MOD No.
202378S32195 (Service Bulletin No. A330-23-3323 or Service Bulletin No.
A330-23-3330) is embodied.
(1) Models
0082 0095 0261 0265 0713 0720 0728 0732 0735 0773 0777 0781-0782 0788-0789
0791-0792 0809-0810 0813 0815 0818 0820-0821 0824 0826 0830 0832 0836
0839-0840 0849 0851-0852 0854 0860 0862 0866-0868 0873-0875 0877 0879 0881
0883-0884 0889-0891 0893 0899 0903-0904 0906-0909 0914 0916 0918-0919
0927-0928 0930 0934-0937 0939 0941-0942 0944 0946 0948 0954 0957-0958
0963-0964 0967 0973 0975 0982 0988 0991 0994 1004 1007 1009 1013-1014 1016
1020 1023 1028 1032-1033 1038 1043-1047 1049 1052-1053 1057-1058 1063 1065
The Operator/MSN relationship is provided for information only and is correct at the time
of issue in accordance with the information available to AIRBUS. Any future changes
resulting from transfer of an aircraft from one operator to another will not be reflected in
this list unless the Service Bulletin is revised for another reason.
OPERATOR MSN
43P 1053
AAW 1043 1472 1535
AEA 1574
AFL 0963 0973 1014 1045 1047 1058 1065 1072 1077 1103 1232 1247
1264 1270 1284 1299 1301 1323 1328 1345 1356 1371
AVA 1009 1016 1073 1208 1224 1279 1342 1357 1378 1400
AZA 1123 1135 1218 1225 1252 1283 1308 1313 1327 1354
BEL 0082 0095
CBJ 0988 1020 1028 1052
CCA 0810 0815 0839 0860 0867 0873 0884 0890 0903 0909 0930 0941
0944 0957 1087 1110 1130 1187 1199 1216 1237 1260 1282 1304
1330 1333 1353 1373 1383 1396 1413 1434 1444 1459 1471 1493
1509 1525 1538 1541 1563
CES 0713 0735 0773 0777 0781 0782 0791 0821 0830 0836 0851 0862
0866 0916 0928 0936 0942 1262 1267 1280 1291 1303 1324 1331
1372 1375 1402 1421 1429 1440 1461 1468 1479 1484 1500 1520
1537 1547 1551
CHH 0875 0881 0906 0919 0982 1159 1168 1178 1190 1255 1325 1438
1532 1558
CRK 1277 1286 1322 1358 1369 1384 1398
CSN 0818 0840 0879 0889 0908 0935 0937 0954 0958 0964 1096 1116
1129 1202 1220 1233 1244 1297 1309 1335
ETD 0788 0809 0824 0832 0852 0854 0868 0975 0991 1032 1070 1071
1081 1167 1205 1226 1245 1414 1486 1521 1524
FIN 0994 1007 1013 1023 1067 1078 1088 1173
GIA 1184 1214 1261 1288 1364 1410 1446 1474 1548 1560
HAL 1104 1114 1171 1217 1259 1295 1302 1310 1316 1389 1399 1404
1422 1469 1488 1496 1511 1530 1565
OPERATOR MSN
IRA 1540 1586
KLM 1287 1294 1300 1381
LAA 1412 1505 1543
MAS 1209 1219 1229 1234 1243 1281 1318 1336 1337 1347 1388 1395
1431 1470 1489
MAU 0883 1057
MNB 1332
MSR 1143 1230 1238 1246
NMB 1451 1466
OMA 1038 1044 1049 1063 1093 1120 1227
ONE 1492 1506 1508 1608 1657
P2C 0891 0927
PAL 1449 1456 1460 1463 1467 1475 1482 1504 1510 1531 1546 1553
1559
PLM 0261 0265
QTR 0789 0792 0813 0820 0826 0849 0893 0907 0918 1578 1584 1594
RSY 0946
SVA 1108 1127 1137 1141 1147 1153 1189 1192 1454 1462 1473 1513
TAP 0877 0899 0904 0914 0934
TCX 0948 0967
THA 1263 1269 1289 1338 1348 1374 1408
THY 0874 0939 1004 1092 1150 1160 1170 1172 1204 1212 1228 1240
1298 1307 1311 1344 1418 1442 1458 1476 1483 1487 1491 1499
1542 1550 1554 1592 1635 1651
TOW 1033 1046 1248 1275 1312 1334 1363 1390 1419 1439 1498 1555
TPA 1368 1380 1428 1448 1534
TSC 0728 0732
UAF 1080 1186 1250
VIR 1195 1201 1206 1215 1231 1296 1315 1329 1341 1352
WOW 1607 1624
XAX 0720
XLF 1360
MSN CONFIGURATION
0082 0095 0261 0265 0713 0720 0728 0732 0735 0773 0777 004
0781 0782 0788 0789 0791 0792 0809 0810 0813 0815 0818
0820 0821 0824 0826 0830 0832 0836 0839 0840 0849 0851
0852 0854 0860 0862 0866 0867 0868 0873 0874 0875 0879
0881 0883 0884 0889 0890 0891 0893 0903 0906 0907 0908
0909 0916 0918 0919 0927 0928 0930 0935 0936 0937 0939
0941 0942 0944 0946 0948 0954 0957 0958 0964 0967 0975
0982 0988 0991 1004 1009 1016 1020 1028 1033 1043 1046
1052 1053 1057 1073 1080 1087 1092 1096 1104 1110 1114
1116 1129 1130 1159 1171 1184 1186 1202 1208 1214 1217
1220 1224 1233 1244 1248 1250 1259 1261 1275 1279 1280
1288 1295 1297 1302 1309 1310 1312 1316 1332 1334 1335
1342 1360 1363 1368 1380 1418 1428 1442 1448 1451 1466
1483 1491 1492 1506 1508 1534 1540 1542 1550 1554 1574
1578 1584 1586 1592 1594 1607 1608 1624 1635 1651 1657
0877 0899 0904 0914 0934 0963 0973 1014 1032 1038 1044 001 002
1045 1047 1049 1058 1063 1065 1070 1071 1072 1077 1081
1093 1103 1108 1120 1127 1137 1141 1143 1147 1153 1167
1168 1178 1187 1189 1190 1192 1195 1199 1201 1205 1206
1215 1216 1226 1227 1231 1232 1237 1238 1245 1247 1255
1260 1263 1264 1269 1270 1277 1281 1282 1284 1286 1287
1289 1294 1296 1298 1299 1300 1301 1304 1307 1311 1315
1318 1322 1325 1328 1329 1330 1333 1336 1337 1338 1341
1345 1347 1348 1352 1353 1356
0994 1007 1013 1023 1067 1078 1088 1150 1160 1170 1172 001 002 004
1173 1204 1209 1212 1219 1228 1229 1234 1240 1243
1123 1135 1218 1225 1230 1246 1252 1262 1267 1283 1291 002
1303 1308 1313 1323 1324 1327 1331 1354 1357 1358 1364
1369 1371 1372 1373 1374 1375 1378 1381 1383 1384 1388
1389 1390 1395 1396 1398 1399 1400 1402 1404 1408 1410
1412 1413 1414 1419 1421 1422 1429 1431 1434 1438 1439
1440 1444 1446 1449 1454 1456 1458 1459 1460 1461 1462
1463 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476
1479 1482 1484 1486 1487 1488 1489 1493 1496 1498 1499
1500 1504 1505 1509 1510 1511 1513 1520 1521 1524 1525
1530 1531 1532 1535 1537 1538 1541 1543 1546 1547 1548
1551 1553 1555 1558 1559 1560 1563 1565
1344 003 004
**CONF 001
Config. 001 is valid for aircraft on which:
- MOD No. 202378S32195 (Service Bulletin No. A330-23-3323 or Service Bulletin No.
A330-23-3330) is not embodied,
- MOD No. 201409S31636 (Service Bulletin No. A330-23-3282 or Service Bulletin No.
A330-23-3337) is embodied,
- MOD No. 201201S31588 (Service Bulletin No. A330-23-3282 or Service Bulletin No.
A330-23-3330 or Service Bulletin No. A330-23-3337) is embodied.
**CONF 002
Config. 002 is valid for aircraft on which:
- MOD No. 202378S32195 (Service Bulletin No. A330-23-3323 or Service Bulletin No.
A330-23-3330) is embodied,
- MOD No. 201409S31636 (Service Bulletin No. A330-23-3282 or Service Bulletin No.
A330-23-3337) is embodied,
- MOD No. 201201S31588 (Service Bulletin No. A330-23-3282 or Service Bulletin No.
A330-23-3330 or Service Bulletin No. A330-23-3337) is embodied or not.
**CONF 003
Config. 003 is valid for aircraft on which:
- MOD No. 202378S32195 (Service Bulletin No. A330-23-3323 or Service Bulletin No.
A330-23-3330) is not embodied,
- MOD No. 201409S31636 (Service Bulletin No. A330-23-3282 or Service Bulletin No.
A330-23-3337) is not embodied,
- MOD No. 201201S31588 is embodied in production line and Service Bulletin
No. A330-23-3282 and Service Bulletin No. A330-23-3330 and Service Bulletin No.
A330-23-3337 are not embodied.
**CONF 004
Config. 004 is valid for aircraft on which:
- MOD No. 202378S32195 (Service Bulletin No. A330-23-3323 or Service Bulletin No.
A330-23-3330) is embodied,
- MOD No. 201409S31636 (Service Bulletin No. A330-23-3282 or Service Bulletin No.
A330-23-3337) is not embodied,
- MOD No. 201201S31588 (Service Bulletin No. A330-23-3282 or Service Bulletin No.
A330-23-3330 or Service Bulletin No. A330-23-3337) is embodied or not.
For the retrofitted modifications after accomplishment of this Service Bulletin, refer to
Appendix 01 - Retrofitted Modifications .
**CONF 001
**CONF 002
**CONF 003
**CONF 004
**CONF ALL
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
A new enhanced standard "MOD C" of Satellite Data Unit (SDU) and High Speed Data
Unit (HSDU) Swift Broad Band (SBB) capable provided by HONEYWELL has been
developed.
This new standard SBB MOD C SATCOM is proposed in replacement of SBB MOD B
and is a software modification only.
The SDU embedded software is now managed in configuration and identified as below:
The new management of SDU software requires the installation of MEDIA in the cockpit
as identified below:
(2) Objective/Action
This Service Bulletin is published to advise all operators of Long Range aircraft of the
issue of HONEYWELL Service Bulletin No. 7516118-23-0025 (for SDU conversion) and
Service Bulletin No. 7520061-23-0009 (for HSDU conversion).
- Upgrading the existing HSDU and SDU software by a new HSDU "MOC C" SBB
software on Aircraft or on bench with HONEYWELL Service Bulletin or AMM,
or
- replacement of HSDU hardware (FIN 63RV1) and SDU hardware (FIN 5RV1) by
new hardware with SBB MOD C software loaded.
(3) Advantages
Accomplishment of this Service Bulletin will introduce new standard SBB "MOD C"
SATCOM with following improvements:
- EPR correction (involving SDU reset during flight, channel card deregistration,
satellite In-Lock wrong status, ...),
- Corrections of issues "Tx blocked", and "Backoff failure" raised following SBB "MOD
B" entry into service monitoring,
None
D. DESCRIPTION
NOTE: For Config. 001 and Config. 002, to accomplish this Service Bulletin, twelve
possibilities are available:
NOTE: For Config. 003 and Config. 004, to accomplish this Service Bulletin, four
possibilities are available:
on Aircraft
**CONF 001
Task 233367-831-802-001: Modification of the SDU (FIN 5RV1) in accordance with VSB on
Bench
(1) Remove the SDU (FIN 5RV1) in the Aft Electronics Rack 800VU
(2) Modify the SDU (FIN 5RV1) in accordance with VSB on Bench
(3) Install the modified SDU (FIN 5RV1) in the Aft Electronics Rack 800VU
(4) Install the Medias (FINs 5RVMD1 and 5RVMD2) in the stowage box, in the cockpit
(1) Modify the SDU Software (FINs 5RV1SW1 and 5RV1SW2) in accordance with VSB
on Aircraft with Compact Disk (CD) or Floppy Disk
(2) Install the Medias (FINs 5RVMD1 and 5RVMD2) in the stowage box, in the cockpit
(1) Upload the SDU Software (FINs 5RV1SW1 and 5RV1SW2) with Compact Disk (CD)
or Floppy Disk
(2) Install the Medias (FINs 5RVMD1 and 5RVMD2) in the stowage box, in the cockpit
(2) Install the Medias (FINs 5RVMD1 and 5RVMD2) in the stowage box, in the cockpit
Task 233367-831-806-001: Modification of the HSDU (FIN 63RV1) in accordance with VSB
on Bench
(2) Modify the HSDU (FIN 63RV1) in accordance with VSB on Bench
Task 233367-831-805-001: Modification of the HSDU (FIN 63RV1) in accordance with VSB
on Aircraft
(1) Modify the HSDU (FIN 63RV1) in accordance with VSB on Aircraft
**CONF 002
Task 233367-831-802-001: Modification of the SDU (FIN 5RV1) in accordance with VSB on
Bench
(1) Remove the SDU (FIN 5RV1) in the Aft Electronics Rack 800VU
(2) Modify the SDU (FIN 5RV1) in accordance with VSB on Bench
(3) Install the modified SDU (FIN 5RV1) in the Aft Electronics Rack 800VU
(4) Install the Medias (FINs 5RVMD1 and 5RVMD2) in the stowage box, in the cockpit
(1) Modify the SDU Software (FINs 5RV1SW1 and 5RV1SW2) in accordance with VSB
on Aircraft with Compact Disk (CD) or Floppy Disk
(2) Install the Medias (FINs 5RVMD1 and 5RVMD2) in the stowage box, in the cockpit
(1) Upload the SDU Software (FINs 5RV1SW1 and 5RV1SW2) with Compact Disk (CD)
or Floppy Disk
(2) Install the Medias (FINs 5RVMD1 and 5RVMD2) in the stowage box, in the cockpit
(2) Install the Medias (FINs 5RVMD1 and 5RVMD2) in the stowage box, in the cockpit
Task 233367-831-806-001: Modification of the HSDU (FIN 63RV1) in accordance with VSB
on Bench
(2) Modify the HSDU (FIN 63RV1) in accordance with VSB on Bench
Task 233367-831-805-001: Modification of the HSDU (FIN 63RV1) in accordance with VSB
on Aircraft
(1) Modify the HSDU (FIN 63RV1) in accordance with VSB on Aircraft
**CONF 003
Task 233367-831-802-001: Modification of the SDU (FIN 5RV1) in accordance with VSB on
Bench
(1) Remove the SDU (FIN 5RV1) in the Aft Electronics Rack 800VU
(2) Modify the SDU (FIN 5RV1) in accordance with VSB on Bench
(3) Install the modified SDU (FIN 5RV1) in the Aft Electronics Rack 800VU
(4) Install the Medias (FINs 5RVMD1 and 5RVMD2) in the stowage box, in the cockpit
(1) Modify the SDU Software (FINs 5RV1SW1 and 5RV1SW2) in accordance with VSB
on Aircraft with Compact Disk (CD) or Floppy Disk
(2) Install the Medias (FINs 5RVMD1 and 5RVMD2) in the stowage box, in the cockpit
(1) Upload the SDU Software (FINs 5RV1SW1 and 5RV1SW2) with Compact Disk (CD)
or Floppy Disk
(2) Install the Medias (FINs 5RVMD1 and 5RVMD2) in the stowage box, in the cockpit
(2) Install the Medias (FINs 5RVMD1 and 5RVMD2) in the stowage box, in the cockpit
**CONF 004
Task 233367-831-802-001: Modification of the SDU (FIN 5RV1) in accordance with VSB on
Bench
(1) Remove the SDU (FIN 5RV1) in the Aft Electronics Rack 800VU
(2) Modify the SDU (FIN 5RV1) in accordance with VSB on Bench
(3) Install the modified SDU (FIN 5RV1) in the Aft Electronics Rack 800VU
(4) Install the Medias (FINs 5RVMD1 and 5RVMD2) in the stowage box, in the cockpit
(1) Modify the SDU Software (FINs 5RV1SW1 and 5RV1SW2) in accordance with VSB
on Aircraft with Compact Disk (CD) or Floppy Disk
(2) Install the Medias (FINs 5RVMD1 and 5RVMD2) in the stowage box, in the cockpit
(1) Upload the SDU Software (FINs 5RV1SW1 and 5RV1SW2) with Compact Disk (CD)
or Floppy Disk
(2) Install the Medias (FINs 5RVMD1 and 5RVMD2) in the stowage box, in the cockpit
(2) Install the Medias (FINs 5RVMD1 and 5RVMD2) in the stowage box, in the cockpit
**CONF ALL
E. COMPLIANCE
(1) Classification
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organisation Approval No. EASA.21J.031.
If an aircraft listed in the effectivity has a modification or repair embodied that is not of
AIRBUS origin, and which affects the content of this Service Bulletin, the operator is
responsible for obtaining approval by its airworthiness authority for any adaptation necessary
before incorporation of the Service Bulletin.
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also not
included.
**CONF 001
Task 233367-831-802-001: Modification of the SDU (FIN 5RV1) in accordance with VSB on
Bench
Get Access 0.50
On Aircraft
Remove the SDU (FIN 5RV1) in the Aft Electronics 0.25
Rack 800VU
Install the modified SDU (FIN 5RV1) in the Aft 0.25
Electronics Rack 800VU
Install the Medias (FINs 5RVMD1 and 5RVMD2) in the 0.50
stowage box, in the cockpit
Tests 0.50
Close-Up 0.50
TOTAL MANHOURS 2.50
ELAPSED TIME (HOURS) 2.50
Task 233367-831-806-001: Modification of the HSDU (FIN 63RV1) in accordance with VSB on
Bench
Get Access 0.50
On Aircraft
Remove the HSDU (FIN 63RV1) 0.25
Install the modified HSDU (FIN 63RV1) 0.25
Tests 0.25
Close-Up 0.50
TOTAL MANHOURS 1.75
ELAPSED TIME (HOURS) 1.75
Task 233367-831-805-001: Modification of the HSDU (FIN 63RV1) in accordance with VSB on
Aircraft
Get Access 0.50
Tests 0.25
Close-Up 0.50
TOTAL MANHOURS 1.25
ELAPSED TIME (HOURS) 1.25
Task 233367-831-805-001: Modification of the HSDU (FIN 63RV1) in accordance with VSB on
Aircraft
**CONF 002
Task 233367-831-802-001: Modification of the SDU (FIN 5RV1) in accordance with VSB on
Bench
Get Access 0.50
On Aircraft
Remove the SDU (FIN 5RV1) in the Aft Electronics 0.25
Rack 800VU
Install the modified SDU (FIN 5RV1) in the Aft 0.25
Electronics Rack 800VU
Install the Medias (FINs 5RVMD1 and 5RVMD2) in the 0.50
stowage box, in the cockpit
Tests 0.50
Close-Up 0.50
TOTAL MANHOURS 2.50
ELAPSED TIME (HOURS) 2.50
Task 233367-831-806-001: Modification of the HSDU (FIN 63RV1) in accordance with VSB on
Bench
Get Access 0.50
On Aircraft
Remove the HSDU (FIN 63RV1) 0.25
Install the modified HSDU (FIN 63RV1) 0.25
Tests 0.25
Close-Up 0.50
TOTAL MANHOURS 1.75
ELAPSED TIME (HOURS) 1.75
Task 233367-831-805-001: Modification of the HSDU (FIN 63RV1) in accordance with VSB on
Aircraft
Get Access 0.50
Tests 0.25
Close-Up 0.50
TOTAL MANHOURS 1.25
ELAPSED TIME (HOURS) 1.25
**CONF 003
Task 233367-831-802-001: Modification of the SDU (FIN 5RV1) in accordance with VSB on
Bench
Get Access 0.50
On Aircraft
Remove the SDU (FIN 5RV1) in the Aft Electronics 0.25
Rack 800VU
Install the modified SDU (FIN 5RV1) in the Aft 0.25
Electronics Rack 800VU
Install the Medias (FINs 5RVMD1 and 5RVMD2) in the 0.50
stowage box, in the cockpit
Tests 0.50
Close-Up 0.50
TOTAL MANHOURS 2.50
ELAPSED TIME (HOURS) 2.50
**CONF 004
Task 233367-831-802-001: Modification of the SDU (FIN 5RV1) in accordance with VSB on
Bench
Get Access 0.50
On Aircraft
Remove the SDU (FIN 5RV1) in the Aft Electronics 0.25
Rack 800VU
Task 233367-831-802-001: Modification of the SDU (FIN 5RV1) in accordance with VSB on
Bench
Install the modified SDU (FIN 5RV1) in the Aft 0.25
Electronics Rack 800VU
Install the Medias (FINs 5RVMD1 and 5RVMD2) in the 0.50
stowage box, in the cockpit
Tests 0.50
Close-Up 0.50
TOTAL MANHOURS 2.50
ELAPSED TIME (HOURS) 2.50
**CONF ALL
Not Changed
Not Changed
J. REFERENCES
**CONF 001
**CONF 002
**CONF 003
**CONF 004
**CONF ALL
K. PUBLICATION AFFECTED
L. INTERCHANGEABILITY/MIXABILITY
The interchangeability/mixability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
**CONF 001
**CONF 002
**CONF 003
**CONF 004
**CONF ALL
M. SPARES
SDU 7516118-27151
SDU 7516118-47151
HSDU 7520061-34016
The parts listed here must not be installed anymore on aircraft which have accomplished this
Service Bulletin or which have the equivalent production modification embodied.
2. MATERIAL INFORMATION
**CONF ALL
Refer to the HONEYWELL Service Bulletin No. 7516118-23-0025 for the equipment
modification sales terms.
Equipment BFEA06
Refer to the HONEYWELL Service Bulletin No. 7520061-23-0009 for the equipment
modification sales terms.
Procurement terms for the equipment must be negotiated with the equipment supplier.
From Equipment BFEA01 to Equipment BFEA02 and from Equipment BFEA08 to Equipment
BFEA09
Refer to the HONEYWELL Service Bulletin No. 7516118-23-0025 for the industry support
terms of the Vendor Service Bulletin parts and labor.
Equipment BFEA06
Refer to the HONEYWELL Service Bulletin No. 7520061-23-0009 for the industry support
terms of the Vendor Service Bulletin parts and labor.
Industry support terms for the equipment must be negotiated with the equipment supplier.
C. LIST OF COMPONENTS
No Kit
None
(2) Components
None
(3) Equipment
Equipment BFEA01
ITEM NEW PART N˚ QTY (UM) KEYWORD ITEM OLD PART N˚ INT SEE
NOTES
HNI472000089902 1 MEDIA (1) (2)
HNI474088550927 1 SOFTWARE
HNI4F2000091903 1 MEDIA (2) (3)
HNI5CABFUSR0002 1 SOFTWARE
NOTE: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
NOTE: Install one of these PNs in relation with the aircraft configuration:
NOTE (1): Operators with CD-ROM on board shall only order MEDIA CD-ROM (FIN
5RVMD1) PN HNI472000089902 which contains the SDU Software PN
HNI5CABFUSR0002.
NOTE (2): Operators with Disk on board shall only order Disk PN PS4088550-927
which contain the necessary Softwares.
NOTE (3): Operators with CD-ROM on board shall only order MEDIA CD-ROM (FIN
5RVMD2) PN HNI4F2000091903 which contains the SDU Software PN
HNI474088550927.
Equipment BFEA02
ITEM NEW PART N˚ QTY (UM) KEYWORD ITEM OLD PART N˚ INT SEE
NOTES
7516118-27145 1 SDU 7516118-27151 03
NOTE: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
Equipment BFEA03
ITEM NEW PART N˚ QTY (UM) KEYWORD ITEM OLD PART N˚ INT SEE
NOTES
HNI472000089902 1 MEDIA (1) (2)
HNI474088550927 1 SOFTWARE
HNI4F2000091903 1 MEDIA (2) (3)
HNI5CABFUSR0002 1 SOFTWARE
NOTE: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
NOTE: Install one of these PNs in relation with the aircraft configuration:
NOTE (1): Operators with CD-ROM on board shall only order MEDIA CD-ROM (FIN
5RVMD1) PN HNI472000089902 which contains the SDU Software PN
HNI5CABFUSR0002.
NOTE (2): Operators with Disk on board shall only order Disk PN PS4088550-927
which contain the necessary Softwares.
NOTE (3): Operators with CD-ROM on board shall only order MEDIA CD-ROM (FIN
5RVMD2) PN HNI4F2000091903 which contains the SDU Software PN
HNI474088550927.
Equipment BFEA04
ITEM NEW PART N˚ QTY (UM) KEYWORD ITEM OLD PART N˚ INT SEE
NOTES
7516118-27145 1 SDU 7516118-27151 03
NOTE: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
Equipment BFEA05
ITEM NEW PART N˚ QTY (UM) KEYWORD ITEM OLD PART N˚ INT SEE
NOTES
7516118-47145 1 SDU 7516118-47151 03
NOTE: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
Equipment BFEA06
ITEM NEW PART N˚ QTY (UM) KEYWORD ITEM OLD PART N˚ INT SEE
NOTES
7520061-34017 1 HSDU 7520061-34016 03
NOTE: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
Equipment BFEA07
ITEM NEW PART N˚ QTY (UM) KEYWORD ITEM OLD PART N˚ INT SEE
NOTES
7520061-34017 1 HSDU 7520061-34016 03
NOTE: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
Equipment BFEA08
ITEM NEW PART N˚ QTY (UM) KEYWORD ITEM OLD PART N˚ INT SEE
NOTES
7516118-47145 1 SDU 7516118-47151 03
NOTE: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD ITEM OLD PART N˚ INT SEE
NOTES
PS4088550-927 1 MEDIA (1)
NOTE: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
NOTE: Install one of these PNs in relation with the aircraft configuration:
NOTE (1): Operators with Disk on board shall only order MEDIA floppy
disk PN PS4088550-927 which contains the SDU Software PN
HNI5CABFUSR0002 and PN HNI474088550927.
F. TOOLING
None
(2) Tools
NOTE: To accomplish this Service Bulletin it is necessary to use the tools listed
in the subsequent referenced task:
None
3. ACCOMPLISHMENT INSTRUCTIONS
Task 233367-831-802-001 - Modification of the SDU (FIN 5RV1) in accordance with VSB on
Bench
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
NOTE: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
’refer to’ are used and the operator has a procedure accepted by the local authority
he belongs to, the accepted alternative procedure can be used. When the words ’in
accordance with’ are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms.
NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance
necessary to ensure the continued airworthiness of the aircraft.
**CONF 001
Zone
120 210
Modified FIN
5RV1 5RV1SW1 5RV1SW2 5RVMD1 5RVMD2
Access
Door 811 831 841
Manpower
TOTAL MANHOURS 2.50
ELAPSED TIME (HOURS) 2.50
**CONF 002
Zone
120 210
Modified FIN
5RV1 5RV1SW1 5RV1SW2 5RVMD1 5RVMD2
Access
Door 811 831 841
Manpower
TOTAL MANHOURS 2.50
ELAPSED TIME (HOURS) 2.50
**CONF 003
Zone
120 210
Modified FIN
5RV1 5RV1SW1 5RV1SW2 5RVMD1 5RVMD2
Access
Door 811 831 841
Manpower
TOTAL MANHOURS 2.50
ELAPSED TIME (HOURS) 2.50
**CONF 004
Zone
120 210
Modified FIN
5RV1 5RV1SW1 5RV1SW2 5RVMD1 5RVMD2
Access
Door 811 831 841
Manpower
TOTAL MANHOURS 2.50
ELAPSED TIME (HOURS) 2.50
**CONF ALL
A. GENERAL
**CONF 001
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
(a) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
Manpower Resources
Skills NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
(a) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
Manpower Resources
Skills NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF 003
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
(a) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
Manpower Resources
Skills NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF 004
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
(a) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
Manpower Resources
Skills NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF ALL
B. PREPARATION
**CONF 001
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 12-34-24-860-802
Task 23-28-34-000-801
NOTE: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Do the Job Set-up procedure as specified in the removal of the SDU (FIN 5RV1),
refer to AMM Task 23-28-34-000-801.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 12-34-24-860-802
Task 23-28-34-000-801
NOTE: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Do the Job Set-up procedure as specified in the removal of the SDU (FIN 5RV1),
refer to AMM Task 23-28-34-000-801.
**CONF 003
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 12-34-24-860-802
Task 23-28-34-000-801
NOTE: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Do the Job Set-up procedure as specified in the removal of the SDU (FIN 5RV1),
refer to AMM Task 23-28-34-000-801.
**CONF 004
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 12-34-24-860-802
Task 23-28-34-000-801
NOTE: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Do the Job Set-up procedure as specified in the removal of the SDU (FIN 5RV1),
refer to AMM Task 23-28-34-000-801.
**CONF ALL
C. PROCEDURE
**CONF 001
(1) Subtask 233367-831-003-001 - Remove the SDU (FIN 5RV1) in the Aft Electronics
Rack 800VU
Manpower Resources
Manhours 0.25
Minimum number of person 1
Subtask elapsed time 0.25
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-000-801
(a) Remove:
FIN 5RV1
1 SDU 7516118-27151 Retain
(2) Subtask 233367-831-004-001 - Modify the SDU (FIN 5RV1) in accordance with VSB
on Bench
References
Vendor Service Bulletin (VSB) HONEYWELL 7516118-23-0025
(a) Modify the SDU (FIN 5RV1) as per instructions given in HONEYWELL Service
Bulletin No. 7516118-23-0025.
(3) Subtask 233367-831-005-001 - Install the modified SDU (FIN 5RV1) in the Aft
Electronics Rack 800VU
Manpower Resources
Manhours 0.25
Minimum number of person 1
Subtask elapsed time 0.25
Skills NON SPECIFIC
Equipment BFEA01
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI474088550927 1 SOFTWARE
HNI5CABFUSR0002 1 SOFTWARE
Equipment BFEA02
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
7516118-27145 1 SDU
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-400-801
NOTE: Install one of these PNs in relation with the aircraft configuration:
(a) Install:
FIN 5RV1
1 SDU 7516118-27145
FIN 5RV1SW1
1 Software-SDU HNI5CABFUSR0002
and
FIN 5RV1SW2
1 Software-SDU HNI474088550927
or
(4) Subtask 233367-831-006-001 - Install the Medias (FINs 5RVMD1 and 5RVMD2) in
the stowage box, in the cockpit
Manpower Resources
Manhours 0.50
Minimum number of person 1
Subtask elapsed time 0.50
Skills NON SPECIFIC
Equipment BFEA01
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI472000089902 1 MEDIA
HNI4F2000091903 1 MEDIA
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
(a) Install:
FIN 5RVMD1
1 CD-SATCOM SDU HNI472000089902
NOTE: The CD-ROM (FIN 5RVMD1) contains the software (FIN 5RV1SW1)
Part Number (PN) HNI5CABFUSR0002.
and
FIN 5RVMD2
1 CD-SATCOM-SDU- HNI4F2000091903
PROG
NOTE: The CD-ROM (FIN 5RVMD2) contains the software (FIN 5RV1SW2)
Part Number (PN) HNI474088550927.
or
**CONF 002
(1) Subtask 233367-831-003-003 - Remove the SDU (FIN 5RV1) in the Aft Electronics
Rack 800VU
Manpower Resources
Manhours 0.25
Minimum number of person 1
Subtask elapsed time 0.25
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-000-801
(a) Remove:
FIN 5RV1
1 SDU 7516118-47151 Retain
(2) Subtask 233367-831-004-001 - Modify the SDU (FIN 5RV1) in accordance with VSB
on Bench
References
Vendor Service Bulletin (VSB) HONEYWELL 7516118-23-0025
(a) Modify the SDU (FIN 5RV1) as per instructions given in HONEYWELL Service
Bulletin No. 7516118-23-0025.
(3) Subtask 233367-831-005-003 - Install the modified SDU (FIN 5RV1) in the Aft
Electronics Rack 800VU
Manpower Resources
Manhours 0.25
Minimum number of person 1
Subtask elapsed time 0.25
Skills NON SPECIFIC
Equipment BFEA01
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI474088550927 1 SOFTWARE
HNI5CABFUSR0002 1 SOFTWARE
Equipment BFEA08
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
7516118-47145 1 SDU
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-400-801
NOTE: Install one of these PNs in relation with the aircraft configuration:
(a) Install:
FIN 5RV1
1 SDU 7516118-47145
FIN 5RV1SW1
1 Software-SDU HNI5CABFUSR0002
and
FIN 5RV1SW2
1 Software-SDU HNI474088550927
or
(4) Subtask 233367-831-006-003 - Install the Medias (FINs 5RVMD1 and 5RVMD2) in
the stowage box, in the cockpit
Manpower Resources
Manhours 0.50
Minimum number of person 1
Subtask elapsed time 0.50
Skills NON SPECIFIC
Equipment BFEA01
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI472000089902 1 MEDIA
HNI4F2000091903 1 MEDIA
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
(a) Install:
FIN 5RVMD1
1 CD-SATCOM SDU HNI472000089902
NOTE: The CD-ROM (FIN 5RVMD1) contains the software (FIN 5RV1SW1)
Part Number (PN) HNI5CABFUSR0002.
and
FIN 5RVMD2
1 CD-SATCOM-SDU- HNI4F2000091903
PROG
NOTE: The CD-ROM (FIN 5RVMD2) contains the software (FIN 5RV1SW2)
Part Number (PN) HNI474088550927.
or
**CONF 003
(1) Subtask 233367-831-003-001 - Remove the SDU (FIN 5RV1) in the Aft Electronics
Rack 800VU
Manpower Resources
Manhours 0.25
Minimum number of person 1
Subtask elapsed time 0.25
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-000-801
(a) Remove:
FIN 5RV1
1 SDU 7516118-27151 Retain
(2) Subtask 233367-831-004-001 - Modify the SDU (FIN 5RV1) in accordance with VSB
on Bench
References
Vendor Service Bulletin (VSB) HONEYWELL 7516118-23-0025
(a) Modify the SDU (FIN 5RV1) as per instructions given in HONEYWELL Service
Bulletin No. 7516118-23-0025.
(3) Subtask 233367-831-005-001 - Install the modified SDU (FIN 5RV1) in the Aft
Electronics Rack 800VU
Manpower Resources
Manhours 0.25
Minimum number of person 1
Subtask elapsed time 0.25
Skills NON SPECIFIC
Equipment BFEA01
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI474088550927 1 SOFTWARE
HNI5CABFUSR0002 1 SOFTWARE
Equipment BFEA02
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
7516118-27145 1 SDU
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-400-801
NOTE: Install one of these PNs in relation with the aircraft configuration:
(a) Install:
FIN 5RV1
1 SDU 7516118-27145
FIN 5RV1SW1
1 Software-SDU HNI5CABFUSR0002
and
FIN 5RV1SW2
1 Software-SDU HNI474088550927
or
(4) Subtask 233367-831-006-001 - Install the Medias (FINs 5RVMD1 and 5RVMD2) in
the stowage box, in the cockpit
Manpower Resources
Manhours 0.50
Minimum number of person 1
Subtask elapsed time 0.50
Skills NON SPECIFIC
Equipment BFEA01
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI472000089902 1 MEDIA
HNI4F2000091903 1 MEDIA
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
(a) Install:
FIN 5RVMD1
1 CD-SATCOM SDU HNI472000089902
NOTE: The CD-ROM (FIN 5RVMD1) contains the software (FIN 5RV1SW1)
Part Number (PN) HNI5CABFUSR0002.
and
FIN 5RVMD2
1 CD-SATCOM-SDU- HNI4F2000091903
PROG
NOTE: The CD-ROM (FIN 5RVMD2) contains the software (FIN 5RV1SW2)
Part Number (PN) HNI474088550927.
or
**CONF 004
(1) Subtask 233367-831-003-003 - Remove the SDU (FIN 5RV1) in the Aft Electronics
Rack 800VU
Manpower Resources
Manhours 0.25
Minimum number of person 1
Subtask elapsed time 0.25
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-000-801
(a) Remove:
FIN 5RV1
1 SDU 7516118-47151 Retain
(2) Subtask 233367-831-004-001 - Modify the SDU (FIN 5RV1) in accordance with VSB
on Bench
References
Vendor Service Bulletin (VSB) HONEYWELL 7516118-23-0025
(a) Modify the SDU (FIN 5RV1) as per instructions given in HONEYWELL Service
Bulletin No. 7516118-23-0025.
(3) Subtask 233367-831-005-003 - Install the modified SDU (FIN 5RV1) in the Aft
Electronics Rack 800VU
Manpower Resources
Manhours 0.25
Minimum number of person 1
Subtask elapsed time 0.25
Skills NON SPECIFIC
Equipment BFEA01
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI474088550927 1 SOFTWARE
HNI5CABFUSR0002 1 SOFTWARE
Equipment BFEA08
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
7516118-47145 1 SDU
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-400-801
NOTE: Install one of these PNs in relation with the aircraft configuration:
(a) Install:
FIN 5RV1
1 SDU 7516118-47145
FIN 5RV1SW1
1 Software-SDU HNI5CABFUSR0002
and
FIN 5RV1SW2
1 Software-SDU HNI474088550927
or
(4) Subtask 233367-831-006-003 - Install the Medias (FINs 5RVMD1 and 5RVMD2) in
the stowage box, in the cockpit
Manpower Resources
Manhours 0.50
Minimum number of person 1
Subtask elapsed time 0.50
Skills NON SPECIFIC
Equipment BFEA01
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI472000089902 1 MEDIA
HNI4F2000091903 1 MEDIA
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
(a) Install:
FIN 5RVMD1
1 CD-SATCOM SDU HNI472000089902
NOTE: The CD-ROM (FIN 5RVMD1) contains the software (FIN 5RV1SW1)
Part Number (PN) HNI5CABFUSR0002.
and
FIN 5RVMD2
1 CD-SATCOM-SDU- HNI4F2000091903
PROG
NOTE: The CD-ROM (FIN 5RVMD2) contains the software (FIN 5RV1SW2)
Part Number (PN) HNI474088550927.
or
**CONF ALL
D. TEST
**CONF 001
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-400-801
Task 24-41-00-862-801
Task 45-10-00-860-801
1 Remove the safety clip(s) and/or tag(s) and close/unlock the circuit breakers
as specified after the installation of the SDU (FIN 5RV1), refer to AMM Task
23-28-34-400-801.
(b) Procedure:
1 Do the test procedure as specified after the installation of the SDU (FIN
5RV1), refer to AMM Task 23-28-34-400-801.
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the line key adjacent to the SATCOM - The SAT-1 page comes into view.
indication.
ACTION RESULT
2. Push the line key adjacent to the LRU IDENT - The LRU IDENTIFICATION page comes into
indication. view.
3. On the LRU IDENTIFICATION page, make sure
that:
- The S/W reference is the same as the new S/W
reference that you uploaded.
- The USER ORT S/W reference is the same as
the new USER ORT S/W reference that you
uploaded.
3 Test:
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the MCDU MENU mode key. - The MCDU MENU page comes into view.
2. Push the line key adjacent to the SAT - The SATCOM MAIN MENU page comes into
indication. view.
3. On the SATCOM MAIN MENU page, make
sure that the status of the SAT1 and SAT2 is
"Available".
(c) Close-Up:
a On the MCDU, push the MCDU MENU mode key to get the MCDU
MENU page.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-400-801
Task 24-41-00-862-801
Task 45-10-00-860-801
1 Remove the safety clip(s) and/or tag(s) and close/unlock the circuit breakers
as specified after the installation of the SDU (FIN 5RV1), refer to AMM Task
23-28-34-400-801.
(b) Procedure:
1 Do the test procedure as specified after the installation of the SDU (FIN
5RV1), refer to AMM Task 23-28-34-400-801.
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the line key adjacent to the SATCOM - The SAT-1 page comes into view.
indication.
2. Push the line key adjacent to the LRU IDENT - The LRU IDENTIFICATION page comes into
indication. view.
3. On the LRU IDENTIFICATION page, make sure
that:
- The S/W reference is the same as the new S/W
reference that you uploaded.
- The USER ORT S/W reference is the same as
the new USER ORT S/W reference that you
uploaded.
3 Test:
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the MCDU MENU mode key. - The MCDU MENU page comes into view.
2. Push the line key adjacent to the SAT - The SATCOM MAIN MENU page comes into
indication. view.
3. On the SATCOM MAIN MENU page, make
sure that the status of the SAT1 and SAT2 is
"Available".
(c) Close-Up:
a On the MCDU, push the MCDU MENU mode key to get the MCDU
MENU page.
**CONF 003
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-400-801
Task 24-41-00-862-801
Task 45-10-00-860-801
1 Remove the safety clip(s) and/or tag(s) and close/unlock the circuit breakers
as specified after the installation of the SDU (FIN 5RV1), refer to AMM Task
23-28-34-400-801.
(b) Procedure:
1 Do the test procedure as specified after the installation of the SDU (FIN
5RV1), refer to AMM Task 23-28-34-400-801.
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the line key adjacent to the SATCOM - The SAT-1 page comes into view.
indication.
2. Push the line key adjacent to the LRU IDENT - The LRU IDENTIFICATION page comes into
indication. view.
3. On the LRU IDENTIFICATION page, make sure
that:
- The S/W reference is the same as the new S/W
reference that you uploaded.
- The USER ORT S/W reference is the same as
the new USER ORT S/W reference that you
uploaded.
3 Test:
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the MCDU MENU mode key. - The MCDU MENU page comes into view.
2. Push the line key adjacent to the SAT - The SATCOM MAIN MENU page comes into
indication. view.
ACTION RESULT
3. On the SATCOM MAIN MENU page, make
sure that the status of the SAT1 and SAT2 is
"Available".
(c) Close-Up:
a On the MCDU, push the MCDU MENU mode key to get the MCDU
MENU page.
**CONF 004
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-400-801
Task 24-41-00-862-801
Task 45-10-00-860-801
1 Remove the safety clip(s) and/or tag(s) and close/unlock the circuit breakers
as specified after the installation of the SDU (FIN 5RV1), refer to AMM Task
23-28-34-400-801.
(b) Procedure:
1 Do the test procedure as specified after the installation of the SDU (FIN
5RV1), refer to AMM Task 23-28-34-400-801.
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the line key adjacent to the SATCOM - The SAT-1 page comes into view.
indication.
ACTION RESULT
2. Push the line key adjacent to the LRU IDENT - The LRU IDENTIFICATION page comes into
indication. view.
3. On the LRU IDENTIFICATION page, make sure
that:
- The S/W reference is the same as the new S/W
reference that you uploaded.
- The USER ORT S/W reference is the same as
the new USER ORT S/W reference that you
uploaded.
3 Test:
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the MCDU MENU mode key. - The MCDU MENU page comes into view.
2. Push the line key adjacent to the SAT - The SATCOM MAIN MENU page comes into
indication. view.
3. On the SATCOM MAIN MENU page, make
sure that the status of the SAT1 and SAT2 is
"Available".
(c) Close-Up:
a On the MCDU, push the MCDU MENU mode key to get the MCDU
MENU page.
**CONF ALL
E. CLOSE-UP
**CONF 001
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-400-801
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the Close-up procedure as specified in the installation of the SDU (FIN 5RV1),
refer to AMM Task 23-28-34-400-801.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-400-801
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the Close-up procedure as specified in the installation of the SDU (FIN 5RV1),
refer to AMM Task 23-28-34-400-801.
**CONF 003
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-400-801
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the Close-up procedure as specified in the installation of the SDU (FIN 5RV1),
refer to AMM Task 23-28-34-400-801.
**CONF 004
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-400-801
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the Close-up procedure as specified in the installation of the SDU (FIN 5RV1),
refer to AMM Task 23-28-34-400-801.
**CONF ALL
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
NOTE: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
’refer to’ are used and the operator has a procedure accepted by the local authority
he belongs to, the accepted alternative procedure can be used. When the words ’in
accordance with’ are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms.
NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance
necessary to ensure the continued airworthiness of the aircraft.
**CONF 001
Zone
210
Modified FIN
5RV1SW1 5RV1SW2 5RVMD1 5RVMD2
Access
Door 831 841
Manpower
TOTAL MANHOURS 1.75
ELAPSED TIME (HOURS) 1.75
**CONF 002
Zone
210
Modified FIN
5RV1SW1 5RV1SW2 5RVMD1 5RVMD2
Access
Door 831 841
Manpower
TOTAL MANHOURS 1.75
ELAPSED TIME (HOURS) 1.75
**CONF 003
Zone
210
Modified FIN
5RV1SW1 5RV1SW2 5RVMD1 5RVMD2
Access
Door 831 841
Manpower
TOTAL MANHOURS 1.75
ELAPSED TIME (HOURS) 1.75
**CONF 004
Zone
210
Modified FIN
5RV1SW1 5RV1SW2 5RVMD1 5RVMD2
Access
Door 831 841
Manpower
TOTAL MANHOURS 1.75
ELAPSED TIME (HOURS) 1.75
**CONF ALL
A. GENERAL
**CONF 001
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
(a) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
Manpower Resources
Skills NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
(a) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
Manpower Resources
Skills NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF 003
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
(a) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
Manpower Resources
Skills NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF 004
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
(a) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
Manpower Resources
Skills NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF ALL
B. PREPARATION
**CONF 001
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 12-34-24-860-802
Task 24-41-00-861-801
NOTE: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Energize the aircraft electrical circuits, refer to AMM Task 24-41-00-861-801.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 12-34-24-860-802
Task 24-41-00-861-801
NOTE: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Energize the aircraft electrical circuits, refer to AMM Task 24-41-00-861-801.
**CONF 003
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 12-34-24-860-802
Task 24-41-00-861-801
NOTE: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Energize the aircraft electrical circuits, refer to AMM Task 24-41-00-861-801.
**CONF 004
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 12-34-24-860-802
Task 24-41-00-861-801
NOTE: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Energize the aircraft electrical circuits, refer to AMM Task 24-41-00-861-801.
**CONF ALL
C. PROCEDURE
**CONF 001
(1) Subtask 233367-831-001-001 - Modify the SDU Software (FINs 5RV1SW1 and
5RV1SW2) in accordance with VSB on Aircraft with Compact Disk (CD) or Floppy
Disk
Equipment BFEA01
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI474088550927 1 SOFTWARE
HNI5CABFUSR0002 1 SOFTWARE
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
References
Aircraft Maintenance Manual (AMM) Task 45-10-00-860-801
Vendor Service Bulletin (VSB) HONEYWELL 7516118-23-0025
NOTE: Install one of these PNs in relation with the aircraft configuration:
ACTION RESULT
On the MCDU: On the MCDU:
ACTION RESULT
1. Push the line key adjacent to the SATCOM - The SAT-1 page comes into view.
indication.
2. Push the line key adjacent to the LRU IDENT - The LRU IDENTIFICATION page comes into
indication. view.
3. On the LRU IDENTIFICATION page, make sure
that:
- The S/W reference is not the same as the new
S/W reference that you want to upload.
- The USER ORT S/W reference is not the same
as the new USER ORT S/W reference that you
want to upload.
(c) Do the uploading of the SDU software as per instructions given in HONEYWELL
Service Bulletin No. 7516118-23-0025.
(d) After the uploading, software (FINs 5RV1SW1 and 5RV1SW2) become:
FIN 5RV1SW1
1 Software-SDU HNI5CABFUSR0002
and
FIN 5RV1SW2
1 Software-SDU HNI474088550927
or
NOTE: To remove the electrical power from the SDU, open, safety/lock and
tag this circuit breaker:
NOTE: To apply the electrical power to the SDU, remove the safety clip(s)
and/or tag(s) and close/unlock this circuit breaker:
(f) Remove the safety clip(s) and/or tag(s) and close/unlock this circuit breaker:
(2) Subtask 233367-831-002-001 - Install the Medias (FINs 5RVMD1 and 5RVMD2) in
the stowage box, in the cockpit
Manpower Resources
Manhours 0.50
Minimum number of person 1
Subtask elapsed time 0.50
Skills NON SPECIFIC
Equipment BFEA01
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI472000089902 1 MEDIA
HNI4F2000091903 1 MEDIA
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
(a) Install:
FIN 5RVMD1
1 CD-SATCOM SDU HNI472000089902
NOTE: The CD-ROM (FIN 5RVMD1) contains the software (FIN 5RV1SW1)
Part Number (PN) HNI5CABFUSR0002.
and
FIN 5RVMD2
1 CD-SATCOM-SDU- HNI4F2000091903
PROG
NOTE: The CD-ROM (FIN 5RVMD2) contains the software (FIN 5RV1SW2)
or
**CONF 002
(1) Subtask 233367-831-001-001 - Modify the SDU Software (FINs 5RV1SW1 and
5RV1SW2) in accordance with VSB on Aircraft with Compact Disk (CD) or Floppy
Disk
Equipment BFEA01
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI474088550927 1 SOFTWARE
HNI5CABFUSR0002 1 SOFTWARE
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
References
Aircraft Maintenance Manual (AMM) Task 45-10-00-860-801
Vendor Service Bulletin (VSB) HONEYWELL 7516118-23-0025
NOTE: Install one of these PNs in relation with the aircraft configuration:
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the line key adjacent to the SATCOM - The SAT-1 page comes into view.
indication.
ACTION RESULT
2. Push the line key adjacent to the LRU IDENT - The LRU IDENTIFICATION page comes into
indication. view.
3. On the LRU IDENTIFICATION page, make sure
that:
- The S/W reference is not the same as the new
S/W reference that you want to upload.
- The USER ORT S/W reference is not the same
as the new USER ORT S/W reference that you
want to upload.
(c) Do the uploading of the SDU software as per instructions given in HONEYWELL
Service Bulletin No. 7516118-23-0025.
(d) After the uploading, software (FINs 5RV1SW1 and 5RV1SW2) become:
FIN 5RV1SW1
1 Software-SDU HNI5CABFUSR0002
and
FIN 5RV1SW2
1 Software-SDU HNI474088550927
or
NOTE: To remove the electrical power from the SDU, open, safety/lock and
tag this circuit breaker:
NOTE: To apply the electrical power to the SDU, remove the safety clip(s)
and/or tag(s) and close/unlock this circuit breaker:
(f) Remove the safety clip(s) and/or tag(s) and close/unlock this circuit breaker:
(2) Subtask 233367-831-002-001 - Install the Medias (FINs 5RVMD1 and 5RVMD2) in
the stowage box, in the cockpit
Manpower Resources
Manhours 0.50
Minimum number of person 1
Subtask elapsed time 0.50
Skills NON SPECIFIC
Equipment BFEA01
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI472000089902 1 MEDIA
HNI4F2000091903 1 MEDIA
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
(a) Install:
FIN 5RVMD1
1 CD-SATCOM SDU HNI472000089902
NOTE: The CD-ROM (FIN 5RVMD1) contains the software (FIN 5RV1SW1)
Part Number (PN) HNI5CABFUSR0002.
and
FIN 5RVMD2
1 CD-SATCOM-SDU- HNI4F2000091903
PROG
NOTE: The CD-ROM (FIN 5RVMD2) contains the software (FIN 5RV1SW2)
or
**CONF 003
(1) Subtask 233367-831-001-001 - Modify the SDU Software (FINs 5RV1SW1 and
5RV1SW2) in accordance with VSB on Aircraft with Compact Disk (CD) or Floppy
Disk
Equipment BFEA01
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI474088550927 1 SOFTWARE
HNI5CABFUSR0002 1 SOFTWARE
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
References
Aircraft Maintenance Manual (AMM) Task 45-10-00-860-801
Vendor Service Bulletin (VSB) HONEYWELL 7516118-23-0025
NOTE: Install one of these PNs in relation with the aircraft configuration:
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the line key adjacent to the SATCOM - The SAT-1 page comes into view.
indication.
ACTION RESULT
2. Push the line key adjacent to the LRU IDENT - The LRU IDENTIFICATION page comes into
indication. view.
3. On the LRU IDENTIFICATION page, make sure
that:
- The S/W reference is not the same as the new
S/W reference that you want to upload.
- The USER ORT S/W reference is not the same
as the new USER ORT S/W reference that you
want to upload.
(c) Do the uploading of the SDU software as per instructions given in HONEYWELL
Service Bulletin No. 7516118-23-0025.
(d) After the uploading, software (FINs 5RV1SW1 and 5RV1SW2) become:
FIN 5RV1SW1
1 Software-SDU HNI5CABFUSR0002
and
FIN 5RV1SW2
1 Software-SDU HNI474088550927
or
NOTE: To remove the electrical power from the SDU, open, safety/lock and
tag this circuit breaker:
NOTE: To apply the electrical power to the SDU, remove the safety clip(s)
and/or tag(s) and close/unlock this circuit breaker:
(f) Remove the safety clip(s) and/or tag(s) and close/unlock this circuit breaker:
(2) Subtask 233367-831-002-001 - Install the Medias (FINs 5RVMD1 and 5RVMD2) in
the stowage box, in the cockpit
Manpower Resources
Manhours 0.50
Minimum number of person 1
Subtask elapsed time 0.50
Skills NON SPECIFIC
Equipment BFEA01
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI472000089902 1 MEDIA
HNI4F2000091903 1 MEDIA
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
(a) Install:
FIN 5RVMD1
1 CD-SATCOM SDU HNI472000089902
NOTE: The CD-ROM (FIN 5RVMD1) contains the software (FIN 5RV1SW1)
Part Number (PN) HNI5CABFUSR0002.
and
FIN 5RVMD2
1 CD-SATCOM-SDU- HNI4F2000091903
PROG
NOTE: The CD-ROM (FIN 5RVMD2) contains the software (FIN 5RV1SW2)
or
**CONF 004
(1) Subtask 233367-831-001-001 - Modify the SDU Software (FINs 5RV1SW1 and
5RV1SW2) in accordance with VSB on Aircraft with Compact Disk (CD) or Floppy
Disk
Equipment BFEA01
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI474088550927 1 SOFTWARE
HNI5CABFUSR0002 1 SOFTWARE
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
References
Aircraft Maintenance Manual (AMM) Task 45-10-00-860-801
Vendor Service Bulletin (VSB) HONEYWELL 7516118-23-0025
NOTE: Install one of these PNs in relation with the aircraft configuration:
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the line key adjacent to the SATCOM - The SAT-1 page comes into view.
indication.
ACTION RESULT
2. Push the line key adjacent to the LRU IDENT - The LRU IDENTIFICATION page comes into
indication. view.
3. On the LRU IDENTIFICATION page, make sure
that:
- The S/W reference is not the same as the new
S/W reference that you want to upload.
- The USER ORT S/W reference is not the same
as the new USER ORT S/W reference that you
want to upload.
(c) Do the uploading of the SDU software as per instructions given in HONEYWELL
Service Bulletin No. 7516118-23-0025.
(d) After the uploading, software (FINs 5RV1SW1 and 5RV1SW2) become:
FIN 5RV1SW1
1 Software-SDU HNI5CABFUSR0002
and
FIN 5RV1SW2
1 Software-SDU HNI474088550927
or
NOTE: To remove the electrical power from the SDU, open, safety/lock and
tag this circuit breaker:
NOTE: To apply the electrical power to the SDU, remove the safety clip(s)
and/or tag(s) and close/unlock this circuit breaker:
(f) Remove the safety clip(s) and/or tag(s) and close/unlock this circuit breaker:
(2) Subtask 233367-831-002-001 - Install the Medias (FINs 5RVMD1 and 5RVMD2) in
the stowage box, in the cockpit
Manpower Resources
Manhours 0.50
Minimum number of person 1
Subtask elapsed time 0.50
Skills NON SPECIFIC
Equipment BFEA01
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI472000089902 1 MEDIA
HNI4F2000091903 1 MEDIA
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
(a) Install:
FIN 5RVMD1
1 CD-SATCOM SDU HNI472000089902
NOTE: The CD-ROM (FIN 5RVMD1) contains the software (FIN 5RV1SW1)
Part Number (PN) HNI5CABFUSR0002.
and
FIN 5RVMD2
1 CD-SATCOM-SDU- HNI4F2000091903
PROG
NOTE: The CD-ROM (FIN 5RVMD2) contains the software (FIN 5RV1SW2)
or
**CONF ALL
D. TEST
**CONF 001
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 24-41-00-862-801
Task 45-10-00-860-801
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the line key adjacent to the SATCOM - The SAT-1 page comes into view.
indication.
2. Push the line key adjacent to the LRU IDENT - The LRU IDENTIFICATION page comes into
indication. view.
3. On the LRU IDENTIFICATION page, make sure
that:
- The S/W reference is the same as the new S/W
reference that you uploaded.
- The USER ORT S/W reference is the same as
the new USER ORT S/W reference that you
uploaded.
(b) Test:
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the MCDU MENU mode key. - The MCDU MENU page comes into view.
2. Push the line key adjacent to the SAT - The SATCOM MAIN MENU page comes into
indication. view.
ACTION RESULT
3. On the SATCOM MAIN MENU page, make
sure that the status of the SAT1 and SAT2 is
"Available".
1 On the MCDU, push the MCDU MENU mode key to get the MCDU MENU
page.
(d) De-energize the aircraft electrical circuits, refer to AMM Task 24-41-00-862-801.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 24-41-00-862-801
Task 45-10-00-860-801
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the line key adjacent to the SATCOM - The SAT-1 page comes into view.
indication.
2. Push the line key adjacent to the LRU IDENT - The LRU IDENTIFICATION page comes into
indication. view.
3. On the LRU IDENTIFICATION page, make sure
that:
- The S/W reference is the same as the new S/W
reference that you uploaded.
- The USER ORT S/W reference is the same as
the new USER ORT S/W reference that you
uploaded.
(b) Test:
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the MCDU MENU mode key. - The MCDU MENU page comes into view.
ACTION RESULT
2. Push the line key adjacent to the SAT - The SATCOM MAIN MENU page comes into
indication. view.
3. On the SATCOM MAIN MENU page, make
sure that the status of the SAT1 and SAT2 is
"Available".
1 On the MCDU, push the MCDU MENU mode key to get the MCDU MENU
page.
(d) De-energize the aircraft electrical circuits, refer to AMM Task 24-41-00-862-801.
**CONF 003
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 24-41-00-862-801
Task 45-10-00-860-801
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the line key adjacent to the SATCOM - The SAT-1 page comes into view.
indication.
2. Push the line key adjacent to the LRU IDENT - The LRU IDENTIFICATION page comes into
indication. view.
3. On the LRU IDENTIFICATION page, make sure
that:
- The S/W reference is the same as the new S/W
reference that you uploaded.
- The USER ORT S/W reference is the same as
the new USER ORT S/W reference that you
uploaded.
(b) Test:
ACTION RESULT
On the MCDU: On the MCDU:
ACTION RESULT
1. Push the MCDU MENU mode key. - The MCDU MENU page comes into view.
2. Push the line key adjacent to the SAT - The SATCOM MAIN MENU page comes into
indication. view.
3. On the SATCOM MAIN MENU page, make
sure that the status of the SAT1 and SAT2 is
"Available".
1 On the MCDU, push the MCDU MENU mode key to get the MCDU MENU
page.
(d) De-energize the aircraft electrical circuits, refer to AMM Task 24-41-00-862-801.
**CONF 004
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 24-41-00-862-801
Task 45-10-00-860-801
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the line key adjacent to the SATCOM - The SAT-1 page comes into view.
indication.
2. Push the line key adjacent to the LRU IDENT - The LRU IDENTIFICATION page comes into
indication. view.
3. On the LRU IDENTIFICATION page, make sure
that:
- The S/W reference is the same as the new S/W
reference that you uploaded.
- The USER ORT S/W reference is the same as
the new USER ORT S/W reference that you
uploaded.
(b) Test:
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the MCDU MENU mode key. - The MCDU MENU page comes into view.
2. Push the line key adjacent to the SAT - The SATCOM MAIN MENU page comes into
indication. view.
3. On the SATCOM MAIN MENU page, make
sure that the status of the SAT1 and SAT2 is
"Available".
1 On the MCDU, push the MCDU MENU mode key to get the MCDU MENU
page.
(d) De-energize the aircraft electrical circuits, refer to AMM Task 24-41-00-862-801.
**CONF ALL
E. CLOSE-UP
**CONF 001
Manpower Resources
Skills NON SPECIFIC
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
**CONF 003
Manpower Resources
Skills NON SPECIFIC
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
**CONF 004
Manpower Resources
Skills NON SPECIFIC
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
**CONF ALL
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
NOTE: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
’refer to’ are used and the operator has a procedure accepted by the local authority
he belongs to, the accepted alternative procedure can be used. When the words ’in
accordance with’ are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms.
NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance
necessary to ensure the continued airworthiness of the aircraft.
**CONF 001
Zone
210
Modified FIN
5RV1SW1 5RV1SW2 5RVMD1 5RVMD2
Access
Door 831 841
Manpower
TOTAL MANHOURS 2.25
ELAPSED TIME (HOURS) 2.25
**CONF 002
Zone
210
Modified FIN
5RV1SW1 5RV1SW2 5RVMD1 5RVMD2
Access
Door 831 841
Manpower
TOTAL MANHOURS 2.25
ELAPSED TIME (HOURS) 2.25
**CONF 003
Zone
210
Modified FIN
5RV1SW1 5RV1SW2 5RVMD1 5RVMD2
Access
Door 831 841
Manpower
TOTAL MANHOURS 2.25
ELAPSED TIME (HOURS) 2.25
**CONF 004
Zone
210
Modified FIN
5RV1SW1 5RV1SW2 5RVMD1 5RVMD2
Access
Door 831 841
Manpower
TOTAL MANHOURS 2.25
ELAPSED TIME (HOURS) 2.25
**CONF ALL
A. GENERAL
**CONF 001
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
(a) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
Manpower Resources
Skills NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
(a) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
Manpower Resources
Skills NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF 003
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
(a) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
Manpower Resources
Skills NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF 004
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
(a) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
Manpower Resources
Skills NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF ALL
B. PREPARATION
**CONF 001
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 12-34-24-860-802
Task 23-28-00-610-801
Task 24-41-00-861-801
NOTE: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 12-34-24-860-802
Task 23-28-00-610-801
Task 24-41-00-861-801
NOTE: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
**CONF 003
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 12-34-24-860-802
Task 23-28-00-610-801
Task 24-41-00-861-801
NOTE: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
**CONF 004
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 12-34-24-860-802
Task 23-28-00-610-801
Task 24-41-00-861-801
NOTE: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
**CONF ALL
C. PROCEDURE
**CONF 001
(1) Subtask 233367-831-007-001 - Upload the SDU Software (FINs 5RV1SW1 and
5RV1SW2) with Compact Disk (CD) or Floppy Disk
Manpower Resources
Manhours 0.50
Minimum number of person 1
Subtask elapsed time 0.50
Skills NON SPECIFIC
Equipment BFEA03
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI474088550927 1 SOFTWARE
HNI5CABFUSR0002 1 SOFTWARE
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
References
Aircraft Maintenance Manual (AMM) Task 23-28-00-610-801
Task 45-10-00-860-801
NOTE: Install one of these PNs in relation with the aircraft configuration:
(a) Procedure:
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the line key adjacent to the SATCOM - The SAT-1 page comes into view.
indication.
2. Push the line key adjacent to the LRU IDENT - The LRU IDENTIFICATION page comes into
indication. view.
3. On the LRU IDENTIFICATION page, make sure
that:
- The S/W reference is not the same as the new
S/W reference that you want to upload.
- The USER ORT S/W reference is not the same
as the new USER ORT S/W reference that you
want to upload.
FIN 5RV1SW1
1 Software-SDU HNI5CABFUSR0002
and
FIN 5RV1SW2
1 Software-SDU HNI474088550927
or
(2) Subtask 233367-831-008-001 - Install the Medias (FINs 5RVMD1 and 5RVMD2) in
the stowage box, in the cockpit
Manpower Resources
Manhours 0.50
Minimum number of person 1
Subtask elapsed time 0.50
Skills NON SPECIFIC
Equipment BFEA03
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI472000089902 1 MEDIA
HNI4F2000091903 1 MEDIA
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
(a) Install:
FIN 5RVMD1
1 CD-SATCOM SDU HNI472000089902
NOTE: The CD-ROM (FIN 5RVMD1) contains the software (FIN 5RV1SW1)
Part Number (PN) HNI5CABFUSR0002.
and
FIN 5RVMD2
1 CD-SATCOM-SDU- HNI4F2000091903
PROG
NOTE: The CD-ROM (FIN 5RVMD2) contains the software (FIN 5RV1SW2)
Part Number (PN) HNI474088550927.
or
**CONF 002
(1) Subtask 233367-831-007-001 - Upload the SDU Software (FINs 5RV1SW1 and
5RV1SW2) with Compact Disk (CD) or Floppy Disk
Manpower Resources
Manhours 0.50
Minimum number of person 1
Subtask elapsed time 0.50
Skills NON SPECIFIC
Equipment BFEA03
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI474088550927 1 SOFTWARE
HNI5CABFUSR0002 1 SOFTWARE
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
References
Aircraft Maintenance Manual (AMM) Task 23-28-00-610-801
Task 45-10-00-860-801
NOTE: Install one of these PNs in relation with the aircraft configuration:
(a) Procedure:
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the line key adjacent to the SATCOM - The SAT-1 page comes into view.
indication.
2. Push the line key adjacent to the LRU IDENT - The LRU IDENTIFICATION page comes into
indication. view.
3. On the LRU IDENTIFICATION page, make sure
that:
- The S/W reference is not the same as the new
S/W reference that you want to upload.
- The USER ORT S/W reference is not the same
as the new USER ORT S/W reference that you
want to upload.
FIN 5RV1SW1
1 Software-SDU HNI5CABFUSR0002
and
FIN 5RV1SW2
1 Software-SDU HNI474088550927
or
(2) Subtask 233367-831-008-001 - Install the Medias (FINs 5RVMD1 and 5RVMD2) in
the stowage box, in the cockpit
Manpower Resources
Manhours 0.50
Minimum number of person 1
Subtask elapsed time 0.50
Skills NON SPECIFIC
Equipment BFEA03
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI472000089902 1 MEDIA
HNI4F2000091903 1 MEDIA
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
(a) Install:
FIN 5RVMD1
1 CD-SATCOM SDU HNI472000089902
NOTE: The CD-ROM (FIN 5RVMD1) contains the software (FIN 5RV1SW1)
Part Number (PN) HNI5CABFUSR0002.
and
FIN 5RVMD2
1 CD-SATCOM-SDU- HNI4F2000091903
PROG
NOTE: The CD-ROM (FIN 5RVMD2) contains the software (FIN 5RV1SW2)
Part Number (PN) HNI474088550927.
or
**CONF 003
(1) Subtask 233367-831-007-001 - Upload the SDU Software (FINs 5RV1SW1 and
5RV1SW2) with Compact Disk (CD) or Floppy Disk
Manpower Resources
Manhours 0.50
Minimum number of person 1
Subtask elapsed time 0.50
Skills NON SPECIFIC
Equipment BFEA03
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI474088550927 1 SOFTWARE
HNI5CABFUSR0002 1 SOFTWARE
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
References
Aircraft Maintenance Manual (AMM) Task 23-28-00-610-801
Task 45-10-00-860-801
NOTE: Install one of these PNs in relation with the aircraft configuration:
(a) Procedure:
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the line key adjacent to the SATCOM - The SAT-1 page comes into view.
indication.
2. Push the line key adjacent to the LRU IDENT - The LRU IDENTIFICATION page comes into
indication. view.
ACTION RESULT
3. On the LRU IDENTIFICATION page, make sure
that:
- The S/W reference is not the same as the new
S/W reference that you want to upload.
- The USER ORT S/W reference is not the same
as the new USER ORT S/W reference that you
want to upload.
FIN 5RV1SW1
1 Software-SDU HNI5CABFUSR0002
and
FIN 5RV1SW2
1 Software-SDU HNI474088550927
or
(2) Subtask 233367-831-008-001 - Install the Medias (FINs 5RVMD1 and 5RVMD2) in
the stowage box, in the cockpit
Manpower Resources
Manhours 0.50
Minimum number of person 1
Subtask elapsed time 0.50
Skills NON SPECIFIC
Equipment BFEA03
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI472000089902 1 MEDIA
HNI4F2000091903 1 MEDIA
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
(a) Install:
FIN 5RVMD1
1 CD-SATCOM SDU HNI472000089902
NOTE: The CD-ROM (FIN 5RVMD1) contains the software (FIN 5RV1SW1)
Part Number (PN) HNI5CABFUSR0002.
and
FIN 5RVMD2
1 CD-SATCOM-SDU- HNI4F2000091903
PROG
NOTE: The CD-ROM (FIN 5RVMD2) contains the software (FIN 5RV1SW2)
Part Number (PN) HNI474088550927.
or
**CONF 004
(1) Subtask 233367-831-007-001 - Upload the SDU Software (FINs 5RV1SW1 and
5RV1SW2) with Compact Disk (CD) or Floppy Disk
Manpower Resources
Manhours 0.50
Minimum number of person 1
Subtask elapsed time 0.50
Skills NON SPECIFIC
Equipment BFEA03
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI474088550927 1 SOFTWARE
HNI5CABFUSR0002 1 SOFTWARE
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
References
Aircraft Maintenance Manual (AMM) Task 23-28-00-610-801
Task 45-10-00-860-801
NOTE: Install one of these PNs in relation with the aircraft configuration:
(a) Procedure:
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the line key adjacent to the SATCOM - The SAT-1 page comes into view.
indication.
2. Push the line key adjacent to the LRU IDENT - The LRU IDENTIFICATION page comes into
indication. view.
3. On the LRU IDENTIFICATION page, make sure
that:
- The S/W reference is not the same as the new
S/W reference that you want to upload.
- The USER ORT S/W reference is not the same
as the new USER ORT S/W reference that you
want to upload.
FIN 5RV1SW1
1 Software-SDU HNI5CABFUSR0002
and
FIN 5RV1SW2
1 Software-SDU HNI474088550927
or
(2) Subtask 233367-831-008-001 - Install the Medias (FINs 5RVMD1 and 5RVMD2) in
the stowage box, in the cockpit
Manpower Resources
Manhours 0.50
Minimum number of person 1
Subtask elapsed time 0.50
Skills NON SPECIFIC
Equipment BFEA03
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI472000089902 1 MEDIA
HNI4F2000091903 1 MEDIA
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
(a) Install:
FIN 5RVMD1
1 CD-SATCOM SDU HNI472000089902
NOTE: The CD-ROM (FIN 5RVMD1) contains the software (FIN 5RV1SW1)
Part Number (PN) HNI5CABFUSR0002.
and
FIN 5RVMD2
1 CD-SATCOM-SDU- HNI4F2000091903
PROG
NOTE: The CD-ROM (FIN 5RVMD2) contains the software (FIN 5RV1SW2)
Part Number (PN) HNI474088550927.
or
**CONF ALL
D. TEST
**CONF 001
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 24-41-00-862-801
Task 45-10-00-860-801
(a) Test:
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the line key adjacent to the SATCOM - The SAT-1 page comes into view.
indication.
2. Push the line key adjacent to the LRU IDENT - The LRU IDENTIFICATION page comes into
indication. view.
3. On the LRU IDENTIFICATION page, make sure
that:
- The S/W reference is the same as the new S/W
reference that you uploaded.
- The USER ORT S/W reference is the same as
the new USER ORT S/W reference that you
uploaded.
2 Test:
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the MCDU MENU mode key. - The MCDU MENU page comes into view.
2. Push the line key adjacent to the SAT - The SATCOM MAIN MENU page comes into
indication. view.
3. On the SATCOM MAIN MENU page, make
sure that the status of the SAT1 and SAT2 is
"Available".
(b) Close-up:
a On the MCDU, push the MCDU MENU mode key to get the MCDU
MENU page.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 24-41-00-862-801
Task 45-10-00-860-801
(a) Test:
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the line key adjacent to the SATCOM - The SAT-1 page comes into view.
indication.
2. Push the line key adjacent to the LRU IDENT - The LRU IDENTIFICATION page comes into
indication. view.
3. On the LRU IDENTIFICATION page, make sure
that:
- The S/W reference is the same as the new S/W
reference that you uploaded.
- The USER ORT S/W reference is the same as
the new USER ORT S/W reference that you
uploaded.
2 Test:
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the MCDU MENU mode key. - The MCDU MENU page comes into view.
2. Push the line key adjacent to the SAT - The SATCOM MAIN MENU page comes into
indication. view.
3. On the SATCOM MAIN MENU page, make
sure that the status of the SAT1 and SAT2 is
"Available".
(b) Close-up:
a On the MCDU, push the MCDU MENU mode key to get the MCDU
MENU page.
**CONF 003
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 24-41-00-862-801
Task 45-10-00-860-801
(a) Test:
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the line key adjacent to the SATCOM - The SAT-1 page comes into view.
indication.
2. Push the line key adjacent to the LRU IDENT - The LRU IDENTIFICATION page comes into
indication. view.
3. On the LRU IDENTIFICATION page, make sure
that:
- The S/W reference is the same as the new S/W
reference that you uploaded.
- The USER ORT S/W reference is the same as
the new USER ORT S/W reference that you
uploaded.
2 Test:
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the MCDU MENU mode key. - The MCDU MENU page comes into view.
2. Push the line key adjacent to the SAT - The SATCOM MAIN MENU page comes into
indication. view.
3. On the SATCOM MAIN MENU page, make
sure that the status of the SAT1 and SAT2 is
"Available".
(b) Close-up:
a On the MCDU, push the MCDU MENU mode key to get the MCDU
MENU page.
**CONF 004
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 24-41-00-862-801
Task 45-10-00-860-801
(a) Test:
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the line key adjacent to the SATCOM - The SAT-1 page comes into view.
indication.
2. Push the line key adjacent to the LRU IDENT - The LRU IDENTIFICATION page comes into
indication. view.
3. On the LRU IDENTIFICATION page, make sure
that:
- The S/W reference is the same as the new S/W
reference that you uploaded.
- The USER ORT S/W reference is the same as
the new USER ORT S/W reference that you
uploaded.
2 Test:
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the MCDU MENU mode key. - The MCDU MENU page comes into view.
2. Push the line key adjacent to the SAT - The SATCOM MAIN MENU page comes into
indication. view.
3. On the SATCOM MAIN MENU page, make
sure that the status of the SAT1 and SAT2 is
"Available".
(b) Close-up:
a On the MCDU, push the MCDU MENU mode key to get the MCDU
MENU page.
**CONF ALL
E. CLOSE-UP
**CONF 001
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-00-610-801
Task 24-41-00-862-801
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the Close-up procedure as specified in the uploading of the SATCOM software,
refer to AMM Task 23-28-00-610-801.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-00-610-801
Task 24-41-00-862-801
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the Close-up procedure as specified in the uploading of the SATCOM software,
refer to AMM Task 23-28-00-610-801.
**CONF 003
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-00-610-801
Task 24-41-00-862-801
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the Close-up procedure as specified in the uploading of the SATCOM software,
refer to AMM Task 23-28-00-610-801.
**CONF 004
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-00-610-801
Task 24-41-00-862-801
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the Close-up procedure as specified in the uploading of the SATCOM software,
refer to AMM Task 23-28-00-610-801.
**CONF ALL
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
NOTE: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
’refer to’ are used and the operator has a procedure accepted by the local authority
he belongs to, the accepted alternative procedure can be used. When the words ’in
accordance with’ are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms.
NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance
necessary to ensure the continued airworthiness of the aircraft.
**CONF 001
Zone
120 210
Modified FIN
5RV1 5RV1SW1 5RV1SW2 5RVMD1 5RVMD2
Access
Door 811 831 841
Manpower
TOTAL MANHOURS 2.25
ELAPSED TIME (HOURS) 2.25
**CONF 002
Zone
120 210
Modified FIN
5RV1 5RV1SW1 5RV1SW2 5RVMD1 5RVMD2
Access
Door 811 831 841
Manpower
TOTAL MANHOURS 2.25
ELAPSED TIME (HOURS) 2.25
**CONF 003
Zone
120 210
Modified FIN
5RV1 5RV1SW1 5RV1SW2 5RVMD1 5RVMD2
Access
Door 811 831 841
Manpower
TOTAL MANHOURS 2.25
ELAPSED TIME (HOURS) 2.25
**CONF 004
Zone
120 210
Modified FIN
5RV1 5RV1SW1 5RV1SW2 5RVMD1 5RVMD2
Access
Door 811 831 841
Manpower
TOTAL MANHOURS 2.25
**CONF ALL
A. GENERAL
**CONF 001
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
(a) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
Manpower Resources
Skills NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
(a) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
Manpower Resources
Skills NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF 003
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
(a) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
Manpower Resources
Skills NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF 004
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
(a) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
Manpower Resources
Skills NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF ALL
B. PREPARATION
**CONF 001
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 12-34-24-860-802
Task 23-28-34-000-801
NOTE: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Do the Job Set-up procedure as specified in the removal of the SDU (FIN 5RV1),
refer to AMM Task 23-28-34-000-801.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 12-34-24-860-802
Task 23-28-34-000-801
NOTE: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Do the Job Set-up procedure as specified in the removal of the SDU (FIN 5RV1),
refer to AMM Task 23-28-34-000-801.
**CONF 003
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 12-34-24-860-802
Task 23-28-34-000-801
NOTE: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Do the Job Set-up procedure as specified in the removal of the SDU (FIN 5RV1),
refer to AMM Task 23-28-34-000-801.
**CONF 004
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 12-34-24-860-802
Task 23-28-34-000-801
NOTE: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Do the Job Set-up procedure as specified in the removal of the SDU (FIN 5RV1),
refer to AMM Task 23-28-34-000-801.
**CONF ALL
C. PROCEDURE
**CONF 001
Manpower Resources
Manhours 0.50
Minimum number of person 1
Subtask elapsed time 0.50
Skills NON SPECIFIC
Equipment BFEA03
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI474088550927 1 SOFTWARE
HNI5CABFUSR0002 1 SOFTWARE
Equipment BFEA04
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
7516118-27145 1 SDU
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-000-801
Task 23-28-34-400-801
NOTE: Install one of these PNs in relation with the aircraft configuration:
FIN 5RV1
1 SDU 7516118-27151 Discard
FIN 5RV1
1 SDU 7516118-27145
FIN 5RV1SW1
1 Software-SDU HNI5CABFUSR0002
and
FIN 5RV1SW2
1 Software-SDU HNI474088550927
or
(2) Subtask 233367-831-015-001 - Install the Medias (FINs 5RVMD1 and 5RVMD2) in
the stowage box, in the cockpit
Manpower Resources
Manhours 0.50
Minimum number of person 1
Subtask elapsed time 0.50
Skills NON SPECIFIC
Equipment BFEA03
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI472000089902 1 MEDIA
HNI4F2000091903 1 MEDIA
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
(a) Install:
FIN 5RVMD1
1 CD-SATCOM SDU HNI472000089902
NOTE: The CD-ROM (FIN 5RVMD1) contains the software (FIN 5RV1SW1)
Part Number (PN) HNI5CABFUSR0002.
and
FIN 5RVMD2
1 CD-SATCOM-SDU- HNI4F2000091903
PROG
NOTE: The CD-ROM (FIN 5RVMD2) contains the software (FIN 5RV1SW2)
Part Number (PN) HNI474088550927.
or
**CONF 002
Manpower Resources
Manhours 0.50
Minimum number of person 1
Subtask elapsed time 0.50
Skills NON SPECIFIC
Equipment BFEA03
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI474088550927 1 SOFTWARE
HNI5CABFUSR0002 1 SOFTWARE
Equipment BFEA05
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
7516118-47145 1 SDU
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-000-801
Task 23-28-34-400-801
NOTE: Install one of these PNs in relation with the aircraft configuration:
FIN 5RV1
1 SDU 7516118-47151 Discard
FIN 5RV1
1 SDU 7516118-47145
FIN 5RV1SW1
1 Software-SDU HNI5CABFUSR0002
and
FIN 5RV1SW2
1 Software-SDU HNI474088550927
or
(2) Subtask 233367-831-015-002 - Install the Medias (FINs 5RVMD1 and 5RVMD2) in
the stowage box, in the cockpit
Manpower Resources
Manhours 0.50
Minimum number of person 1
Subtask elapsed time 0.50
Skills NON SPECIFIC
Equipment BFEA03
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI472000089902 1 MEDIA
HNI4F2000091903 1 MEDIA
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
(a) Install:
FIN 5RVMD1
1 CD-SATCOM SDU HNI472000089902
NOTE: The CD-ROM (FIN 5RVMD1) contains the software (FIN 5RV1SW1)
Part Number (PN) HNI5CABFUSR0002.
and
FIN 5RVMD2
1 CD-SATCOM-SDU- HNI4F2000091903
PROG
NOTE: The CD-ROM (FIN 5RVMD2) contains the software (FIN 5RV1SW2)
or
**CONF 003
Manpower Resources
Manhours 0.50
Minimum number of person 1
Subtask elapsed time 0.50
Skills NON SPECIFIC
Equipment BFEA03
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI474088550927 1 SOFTWARE
HNI5CABFUSR0002 1 SOFTWARE
Equipment BFEA04
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
7516118-27145 1 SDU
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-000-801
Task 23-28-34-400-801
NOTE: Install one of these PNs in relation with the aircraft configuration:
HNI474088550927
FIN 5RV1
1 SDU 7516118-27151 Discard
FIN 5RV1
1 SDU 7516118-27145
FIN 5RV1SW1
1 Software-SDU HNI5CABFUSR0002
and
FIN 5RV1SW2
1 Software-SDU HNI474088550927
or
(2) Subtask 233367-831-015-001 - Install the Medias (FINs 5RVMD1 and 5RVMD2) in
the stowage box, in the cockpit
Manpower Resources
Manhours 0.50
Minimum number of person 1
Subtask elapsed time 0.50
Skills NON SPECIFIC
Equipment BFEA03
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI472000089902 1 MEDIA
HNI4F2000091903 1 MEDIA
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
(a) Install:
FIN 5RVMD1
1 CD-SATCOM SDU HNI472000089902
NOTE: The CD-ROM (FIN 5RVMD1) contains the software (FIN 5RV1SW1)
Part Number (PN) HNI5CABFUSR0002.
and
FIN 5RVMD2
1 CD-SATCOM-SDU- HNI4F2000091903
PROG
NOTE: The CD-ROM (FIN 5RVMD2) contains the software (FIN 5RV1SW2)
Part Number (PN) HNI474088550927.
or
**CONF 004
Manpower Resources
Manhours 0.50
Minimum number of person 1
Subtask elapsed time 0.50
Skills NON SPECIFIC
Equipment BFEA03
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI474088550927 1 SOFTWARE
HNI5CABFUSR0002 1 SOFTWARE
Equipment BFEA05
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
7516118-47145 1 SDU
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-000-801
Task 23-28-34-400-801
NOTE: Install one of these PNs in relation with the aircraft configuration:
FIN 5RV1
1 SDU 7516118-47151 Discard
FIN 5RV1
1 SDU 7516118-47145
FIN 5RV1SW1
1 Software-SDU HNI5CABFUSR0002
and
FIN 5RV1SW2
1 Software-SDU HNI474088550927
or
(2) Subtask 233367-831-015-002 - Install the Medias (FINs 5RVMD1 and 5RVMD2) in
the stowage box, in the cockpit
Manpower Resources
Manhours 0.50
Minimum number of person 1
Subtask elapsed time 0.50
Skills NON SPECIFIC
Equipment BFEA03
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
HNI472000089902 1 MEDIA
HNI4F2000091903 1 MEDIA
Equipment BFEA09
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
PS4088550-927 1 MEDIA
(a) Install:
FIN 5RVMD1
1 CD-SATCOM SDU HNI472000089902
NOTE: The CD-ROM (FIN 5RVMD1) contains the software (FIN 5RV1SW1)
Part Number (PN) HNI5CABFUSR0002.
and
FIN 5RVMD2
1 CD-SATCOM-SDU- HNI4F2000091903
PROG
NOTE: The CD-ROM (FIN 5RVMD2) contains the software (FIN 5RV1SW2)
or
**CONF ALL
D. TEST
**CONF 001
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-400-801
1 Remove the safety clip(s) and/or tag(s) and close/unlock the circuit breakers
as specified after the installation of the SDU (FIN 5RV1), refer to AMM Task
23-28-34-400-801.
(b) Procedure:
1 Do the test procedure as specified after the installation of the SDU (FIN
5RV1), refer to AMM Task 23-28-34-400-801.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-400-801
1 Remove the safety clip(s) and/or tag(s) and close/unlock the circuit breakers
as specified after the installation of the SDU (FIN 5RV1), refer to AMM Task
23-28-34-400-801.
(b) Procedure:
1 Do the test procedure as specified after the installation of the SDU (FIN
5RV1), refer to AMM Task 23-28-34-400-801.
**CONF 003
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-400-801
1 Remove the safety clip(s) and/or tag(s) and close/unlock the circuit breakers
as specified after the installation of the SDU (FIN 5RV1), refer to AMM Task
23-28-34-400-801.
(b) Procedure:
1 Do the test procedure as specified after the installation of the SDU (FIN
5RV1), refer to AMM Task 23-28-34-400-801.
**CONF 004
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-400-801
1 Remove the safety clip(s) and/or tag(s) and close/unlock the circuit breakers
as specified after the installation of the SDU (FIN 5RV1), refer to AMM Task
23-28-34-400-801.
(b) Procedure:
1 Do the test procedure as specified after the installation of the SDU (FIN
5RV1), refer to AMM Task 23-28-34-400-801.
**CONF ALL
E. CLOSE-UP
**CONF 001
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-400-801
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the Close-up procedure as specified in the installation of the SDU (FIN 5RV1),
refer to AMM Task 23-28-34-400-801.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-400-801
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the Close-up procedure as specified in the installation of the SDU (FIN 5RV1),
refer to AMM Task 23-28-34-400-801.
**CONF 003
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-400-801
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the Close-up procedure as specified in the installation of the SDU (FIN 5RV1),
refer to AMM Task 23-28-34-400-801.
**CONF 004
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-34-400-801
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the Close-up procedure as specified in the installation of the SDU (FIN 5RV1),
refer to AMM Task 23-28-34-400-801.
Task 233367-831-806-001 - Modification of the HSDU (FIN 63RV1) in accordance with VSB
on Bench
**CONF ALL
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
NOTE: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
’refer to’ are used and the operator has a procedure accepted by the local authority
he belongs to, the accepted alternative procedure can be used. When the words ’in
accordance with’ are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms.
NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance
necessary to ensure the continued airworthiness of the aircraft.
**CONF 001
Zone
120
Modified FIN
63RV1
Access
Door 811
Manpower
TOTAL MANHOURS 1.75
ELAPSED TIME (HOURS) 1.75
**CONF 002
Zone
120
Modified FIN
63RV1
Access
Door 811
Manpower
TOTAL MANHOURS 1.75
ELAPSED TIME (HOURS) 1.75
**CONF 003
None
**CONF 004
None
**CONF ALL
A. GENERAL
**CONF 001
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
(a) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
Manpower Resources
Skills NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
(a) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
Manpower Resources
Skills NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF 003
None
**CONF 004
None
**CONF ALL
B. PREPARATION
**CONF 001
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 12-34-24-860-802
Task 23-28-39-000-801
NOTE: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Do the Job Set-up procedure as specified in the removal of the HSDU (FIN
63RV1), refer to AMM Task 23-28-39-000-801.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 12-34-24-860-802
Task 23-28-39-000-801
NOTE: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Do the Job Set-up procedure as specified in the removal of the HSDU (FIN
63RV1), refer to AMM Task 23-28-39-000-801.
**CONF 003
None
**CONF 004
None
**CONF ALL
C. PROCEDURE
**CONF 001
Manpower Resources
Manhours 0.25
Minimum number of person 1
Subtask elapsed time 0.25
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-39-000-801
(a) Remove:
FIN 63RV1
1 HSDU 7520061-34016 Retain
(2) Subtask 233367-831-012-001 - Modify the HSDU (FIN 63RV1) in accordance with
VSB on Bench
References
Vendor Service Bulletin (VSB) HONEYWELL 7520061-23-0009
(a) Modify the HSDU (FIN 63RV1) as per instructions given in HONEYWELL Service
Bulletin No. 7520061-23-0009.
Manpower Resources
Manhours 0.25
Minimum number of person 1
Subtask elapsed time 0.25
Skills NON SPECIFIC
Equipment BFEA06
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
7520061-34017 1 HSDU
References
Aircraft Maintenance Manual (AMM) Task 23-28-39-400-801
(a) Install:
FIN 63RV1
1 HSDU 7520061-34017
**CONF 002
Manpower Resources
Manhours 0.25
Minimum number of person 1
Subtask elapsed time 0.25
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-39-000-801
(a) Remove:
FIN 63RV1
1 HSDU 7520061-34016 Retain
(2) Subtask 233367-831-012-001 - Modify the HSDU (FIN 63RV1) in accordance with
VSB on Bench
References
Vendor Service Bulletin (VSB) HONEYWELL 7520061-23-0009
(a) Modify the HSDU (FIN 63RV1) as per instructions given in HONEYWELL Service
Bulletin No. 7520061-23-0009.
Manpower Resources
Manhours 0.25
Minimum number of person 1
Subtask elapsed time 0.25
Skills NON SPECIFIC
Equipment BFEA06
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
7520061-34017 1 HSDU
References
Aircraft Maintenance Manual (AMM) Task 23-28-39-400-801
(a) Install:
FIN 63RV1
1 HSDU 7520061-34017
**CONF 003
None
**CONF 004
None
**CONF ALL
D. TEST
**CONF 001
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-39-400-801
1 Remove the safety clip(s) and/or tag(s) and close/unlock the circuit breakers
as specified after the installation of the HSDU (FIN 63RV1), refer to AMM
Task 23-28-39-400-801.
(b) Procedure:
1 Do the test procedure as specified after the installation of the HSDU (FIN
63RV1), refer to AMM Task 23-28-39-400-801.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-39-400-801
1 Remove the safety clip(s) and/or tag(s) and close/unlock the circuit breakers
as specified after the installation of the HSDU (FIN 63RV1), refer to AMM
Task 23-28-39-400-801.
(b) Procedure:
1 Do the test procedure as specified after the installation of the HSDU (FIN
63RV1), refer to AMM Task 23-28-39-400-801.
**CONF 003
None
**CONF 004
None
**CONF ALL
E. CLOSE-UP
**CONF 001
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-39-400-801
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the Close-up procedure as specified in the installation of the HSDU (FIN
63RV1), refer to AMM Task 23-28-39-400-801.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-39-400-801
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the Close-up procedure as specified in the installation of the HSDU (FIN
63RV1), refer to AMM Task 23-28-39-400-801.
**CONF 003
None
**CONF 004
None
Task 233367-831-805-001 - Modification of the HSDU (FIN 63RV1) in accordance with VSB
on Aircraft
**CONF ALL
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
NOTE: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
’refer to’ are used and the operator has a procedure accepted by the local authority
he belongs to, the accepted alternative procedure can be used. When the words ’in
accordance with’ are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms.
NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance
necessary to ensure the continued airworthiness of the aircraft.
**CONF 001
Zone
120
Modified FIN
63RV1
Access
Door 811
Manpower
TOTAL MANHOURS 1.25
ELAPSED TIME (HOURS) 1.25
**CONF 002
Zone
120
Modified FIN
63RV1
Access
Door 811
Manpower
TOTAL MANHOURS 1.25
ELAPSED TIME (HOURS) 1.25
**CONF 003
None
**CONF 004
None
**CONF ALL
A. GENERAL
**CONF 001
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
(a) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
Manpower Resources
Skills NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
(a) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
Manpower Resources
Skills NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF 003
None
**CONF 004
None
**CONF ALL
B. PREPARATION
**CONF 001
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 12-34-24-860-802
NOTE: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the MCDU MENU mode key. - The MCDU MENU page comes into view.
2. Push the line key adjacent to the SAT - The SATCOM MAIN MENU page comes into
indication. view.
3. Push the line key adjacent to the SATCOM - The SATCOM SUBMENU page comes into view.
SUBMENU indication.
ACTION RESULT
4. On the SATCOM SUBMENU page, make sure
that the LOGGED-OFF (or LOGGED-OFF INOP)
indication is shown adjacent to the line key 1L.
- If the LOGGED-OFF (or LOGGED-OFF INOP)
indication is shown:
Go to the Para. 2. A. Procedure.
- If the LOGGED-OFF (or LOGGED-OFF INOP)
indication is not shown:
Continue the procedure.
5. Push the line key adjacent to the LOG-ON - The LOG-ON page comes into view.
indication.
6. Push the line key adjacent to the LOG-OFF - The LOGGED-OFF indication comes into view.
indication.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 12-34-24-860-802
NOTE: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
ACTION RESULT
On the MCDU: On the MCDU:
1. Push the MCDU MENU mode key. - The MCDU MENU page comes into view.
2. Push the line key adjacent to the SAT - The SATCOM MAIN MENU page comes into
indication. view.
3. Push the line key adjacent to the SATCOM - The SATCOM SUBMENU page comes into view.
SUBMENU indication.
4. On the SATCOM SUBMENU page, make sure
that the LOGGED-OFF (or LOGGED-OFF INOP)
indication is shown adjacent to the line key 1L.
- If the LOGGED-OFF (or LOGGED-OFF INOP)
indication is shown:
Go to the Para. 2. A. Procedure.
- If the LOGGED-OFF (or LOGGED-OFF INOP)
indication is not shown:
Continue the procedure.
5. Push the line key adjacent to the LOG-ON - The LOG-ON page comes into view.
indication.
6. Push the line key adjacent to the LOG-OFF - The LOGGED-OFF indication comes into view.
indication.
**CONF 003
None
**CONF 004
None
**CONF ALL
C. PROCEDURE
**CONF 001
(1) Subtask 233367-831-010-001 - Modify the HSDU (FIN 63RV1) in accordance with
VSB on Aircraft
Equipment BFEA06
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
7520061-34017 1 HSDU
References
Vendor Service Bulletin (VSB) HONEYWELL 7520061-23-0009
(a) Procedure:
NOTE: To apply the electrical power to the HSDU, remove the safety
clip(s) and/or tag(s) and close/unlock this circuit breaker:
FIN 63RV1
1 HSDU 7520061-34016
becomes:
FIN 63RV1
1 HSDU 7520061-34017
**CONF 002
(1) Subtask 233367-831-010-001 - Modify the HSDU (FIN 63RV1) in accordance with
VSB on Aircraft
Equipment BFEA06
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
7520061-34017 1 HSDU
References
Vendor Service Bulletin (VSB) HONEYWELL 7520061-23-0009
(a) Procedure:
NOTE: To apply the electrical power to the HSDU, remove the safety
clip(s) and/or tag(s) and close/unlock this circuit breaker:
FIN 63RV1
1 HSDU 7520061-34016
becomes:
FIN 63RV1
1 HSDU 7520061-34017
**CONF 003
None
**CONF 004
None
**CONF ALL
D. TEST
**CONF 001
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-00-740-801
1 Remove the safety clip(s) and/or tag(s) and close/unlock this circuit breaker:
(b) Procedure:
1 Do the Built-In Test Equipment (BITE) Test of the SATCOM System, refer to
AMM Task 23-28-00-740-801.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-00-740-801
1 Remove the safety clip(s) and/or tag(s) and close/unlock this circuit breaker:
(b) Procedure:
1 Do the Built-In Test Equipment (BITE) Test of the SATCOM System, refer to
AMM Task 23-28-00-740-801.
**CONF 003
None
**CONF 004
None
**CONF ALL
E. CLOSE-UP
**CONF 001
Manpower Resources
Skills NON SPECIFIC
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
**CONF 003
None
**CONF 004
None
**CONF ALL
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
NOTE: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
’refer to’ are used and the operator has a procedure accepted by the local authority
he belongs to, the accepted alternative procedure can be used. When the words ’in
accordance with’ are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms.
NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance
necessary to ensure the continued airworthiness of the aircraft.
**CONF 001
Zone
120
Modified FIN
63RV1
Access
Door 811
Manpower
TOTAL MANHOURS 1.75
ELAPSED TIME (HOURS) 1.75
**CONF 002
Zone
120
Modified FIN
63RV1
Access
Door 811
Manpower
TOTAL MANHOURS 1.75
ELAPSED TIME (HOURS) 1.75
**CONF 003
None
**CONF 004
None
**CONF ALL
A. GENERAL
**CONF 001
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
(a) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
Manpower Resources
Skills NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) 06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
(a) For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.
(b) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-53, Page Block 001.
Manpower Resources
Skills NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF 003
None
**CONF 004
None
**CONF ALL
B. PREPARATION
**CONF 001
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 12-34-24-860-802
Task 23-28-39-000-801
NOTE: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Do the Job Set-up procedure as specified in the removal of the HSDU (FIN
63RV1), refer to AMM Task 23-28-39-000-801.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 12-34-24-860-802
Task 23-28-39-000-801
NOTE: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Do the Job Set-up procedure as specified in the removal of the HSDU (FIN
63RV1), refer to AMM Task 23-28-39-000-801.
**CONF 003
None
**CONF 004
None
**CONF ALL
C. PROCEDURE
**CONF 001
Manpower Resources
Manhours 0.50
Minimum number of person 1
Subtask elapsed time 0.50
Skills NON SPECIFIC
Equipment BFEA07
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
7520061-34017 1 HSDU
References
Aircraft Maintenance Manual (AMM) Task 23-28-39-000-801
Task 23-28-39-400-801
(a) Remove:
FIN 63RV1
1 HSDU 7520061-34016 Discard
(b) Install:
FIN 63RV1
1 HSDU 7520061-34017
**CONF 002
Manpower Resources
Manhours 0.50
Minimum number of person 1
Subtask elapsed time 0.50
Skills NON SPECIFIC
Equipment BFEA07
ITEM NEW PART N˚ QTY (UM) KEYWORD SEE
NOTES
7520061-34017 1 HSDU
References
Aircraft Maintenance Manual (AMM) Task 23-28-39-000-801
Task 23-28-39-400-801
(a) Remove:
FIN 63RV1
1 HSDU 7520061-34016 Discard
(b) Install:
FIN 63RV1
1 HSDU 7520061-34017
**CONF 003
None
**CONF 004
None
**CONF ALL
D. TEST
**CONF 001
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-39-400-801
1 Remove the safety clip(s) and/or tag(s) and close/unlock the circuit breakers
as specified after the installation of the HSDU (FIN 63RV1), refer to AMM
Task 23-28-39-400-801.
(b) Procedure:
1 Do the test procedure as specified after the installation of the HSDU (FIN
63RV1), refer to AMM Task 23-28-39-400-801.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-39-400-801
1 Remove the safety clip(s) and/or tag(s) and close/unlock the circuit breakers
as specified after the installation of the HSDU (FIN 63RV1), refer to AMM
Task 23-28-39-400-801.
(b) Procedure:
1 Do the test procedure as specified after the installation of the HSDU (FIN
63RV1), refer to AMM Task 23-28-39-400-801.
**CONF 003
None
**CONF 004
None
**CONF ALL
E. CLOSE-UP
**CONF 001
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-39-400-801
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the Close-up procedure as specified in the installation of the HSDU (FIN
63RV1), refer to AMM Task 23-28-39-400-801.
**CONF 002
Manpower Resources
Skills NON SPECIFIC
References
Aircraft Maintenance Manual (AMM) Task 23-28-39-400-801
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the Close-up procedure as specified in the installation of the HSDU (FIN
63RV1), refer to AMM Task 23-28-39-400-801.
**CONF 003
None
**CONF 004
None
**CONF ALL
For the retrofitted modifications after accomplishment of this Service Bulletin, refer to the next page(s).
**CONF ALL
204453S33250 X X
204338S32712 X X
204339S32713 X X
NOTE:
"X" IS USED FOR THE RETROFITTED MODIFICATIONS AFTER
ACCOMPLISHMENT OF THIS SERVICE BULLETIN
G_SB_233367_5_AAAA_01_01
**CONF ALL
For further information concerning the Configuration Definition, refer to the next page(s).
**CONF ALL
201201S31588
202378S32195 201409S31636 OR
OR OR SB 23−3282
CONFIG SB 23−3323 SB 23−3282 OR
OR OR SB 23−3330
SB 23−3330 SB 23−3337 OR
SB 23−3337
001 X X
X X X
002
X X
003 X 01
X X
004
X
NOTE:
"X" IS USED FOR MODIFICATIONS EMBODIED BEFORE ACCOMPLISHMENT
OF THIS SERVICE BULLETIN.
01 MOD No 201201S31588 IS EMBODIED IN PRODUCTION LINE AND
SERVICE BULLETIN No A330−23−3282 AND SERVICE BULLETIN
No A330−23−3330 AND SERVICE BULLETIN No A330−23−3337
ARE NOT EMBODIED. G_SB_233367_5_ABAA_01_00
SB Reporting status
This Service Bulletin will only be incorporated into affected customized Maintenance and Flight
Operations Products if it is duly reported to Airbus.
General information
The SB Reporting policy is published in ISI 00.00.00135. This document provides information regarding:
the SB Reporting means and benefits, the update of customized Maintenance Products and customized
Flight Operations Products.
If this Service Bulletin has an operational impact, refer to paragraph "Flight Operations Products" for
further information on the update of affected Flight Operations Products.
SB Reporting procedure
NOTE: ISI 00.00.00179 covers all the frequently asked questions about SB Reporting. It is revised on a
regular basis.
Use this form to tell us what is your perception of the quality of this Service Bulletin. The reported data
that you provide us will be used to analyse areas of difficulties and to take corrective action to further
improve the quality of our Service Bulletins.
We thank you for the time you have taken in completing this form.
If you have had difficulties in the accomplishment of this SB please quote below the area(s) and give a
short description of the issue.
Comments:
Operator: Date:
Name/Title:
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE