Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
AN5276
5 W × 2-ch (19V, 8 Ω) power amplifier with
variable audio output and volume control
Unit : mm
■ Overview 7.7±0.3
12
The AN5276 is a monolithic integrated circuit designed
(1.3)
for 5.0 W (19 V, 8 Ω) output audio power amplifier. It is
(10.0)
φ3.6
a dual channel SEPP IC suitable for stereo operation in
(1.27)
29.75±0.30
28.0±0.3
20.0±0.3
29.6±0.3
TV application.
+0.15
R1.8
■ Features
• Few external components :
0.6
1.45±0.15
+0.10
(12.5)
• No Bootstrap Capacitors
3.5±0.3
1.2±0.1
• No Negative Feeback Capacitors
1.80±0.15
(1.2)
• Built-in muting circuit 19.1±0.3
■ Applications
• TV
■ Block Diagram
Protection circuit
• Temperature
• Over-voltage
Att. Att. Con • Over-current
• Load short
Ripple
filter
10
11
12
1
GND 4
GND 9
N.C.
Ch.1 In
RF
(Input)
Ch.2 In
N.C.
Out Ch.2
Mute
(Output)
VCC
Standby
Out Ch.1
1
AN5276 ICs for Audio Common Use
■ Pin Descriptions
Pin No. Descriptions Pin No. Descriptions
1 N.C. 7 Ch.2 output
2 Ch.1 input 8 Mute
3 Ripple filter 9 Output GND
4 Input GND 10 VCC
5 Ch.2 input 11 Standby
6 N.C 12 Ch.1 output
2
ICs for Audio Common Use AN5276
3
AN5276 ICs for Audio Common Use
30 kΩ
30 kΩ
3
20 kΩ
15.7 kΩ 15 kΩ
4 Input GND 0
Input ground pin
5 Ch.2 input
200 Ω 400 Ω This is the amplifier input pin.
5
30 kΩ
6 Not connected
4
ICs for Audio Common Use AN5276
600 Ω 9
VCC/2 30 kΩ
8 Mute
Mute input pin.
10 Mute 'on' = 5 V
Mute 'off' = 0 V
3 kΩ 3 kΩ
10 kΩ
8
200 Ω
9 Output GND 0
Ch.1 & Ch.2 output ground.
10 VCC 19 V(typ.)
This is the power supply pin.
5
AN5276 ICs for Audio Common Use
11
5 kΩ
5 kΩ
3 kΩ
10
Driver Cct
Pre amp.
12
600 Ω 9
30 kΩ
6
ICs for Audio Common Use AN5276
VCC
100 µF 1000 µF
VCC
R.F.
5V
8
STB off STB 11
STB on
1 µF 2 12 1000 µF
VIN1
SP
10 kΩ 8Ω
1 µF 5 7 1000 µF
VIN2
SP
10 kΩ 8Ω
5V
Mute on
8.2 kΩ Mute 8 9
Output GND
Mute off
10 µF
1
6
N.C.
Input GND
N.C.
■ Usage Notes
1) External heatsink is needed when used. External heatsink should be fixed to the chassis.
2) Fin of the IC can be connected to GND.
3) Please prevent output to VCC short and output to GND short.
4) The temperature protection circuit will operate at Tj around 150 °C. However, if temperature decreass, the
protection circuit would automatically be deactivated and resume normal operation.
7
AN5276 ICs for Audio Common Use
■ Technical Information
• PD Ta curves of HSI P012-P-0000A
PD T a
80
(1) Tc = Ta, 62.5 °C/W(θj-c = 2 °C/W)
(2) 20.83 W(θf = 4.0 °C/W)
70 With a 100cm2 × 3mm Al heat
sink (black colour coated) or a
62.5 W 200cm2 × 2mm Al heat sink (not
60 lacquered)
(1) (3) 15.63 W(θf = 6.0 °C/W)
Power dissipation PD (W) With a 100cm2 × 2mm Al heat sink
50 (not lacquered)
(4) 3.0 W at Ta = 25 °C(θj-a = 42 °C/W)
Without heat sink
40
30
20.8 W
20 (2)
15.6 W
(3)
10
3.0 W (4)
0
0 25 50 75 100 125 150