Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Substation/Bay:
Substation: Hong Kong Substation address:
Bay: Line to XXX Bay address:
Device:
Name/description: P441 P442 P444 Manufacturer: AREVA
Device type: Device address: 1
Serial/model number: E33
Additional info 1:
Additional info 2:
Nominal Values:
f nom: 50.00 Hz Number of phases: 3
V nom (secondary): 110.0 V V primary: 110.0 V
I nom (secondary): 1.000 A I primary: 1.000 A
Limits:
V max: 500.0 V I max: 50.00 A
Debounce/Deglitch Filters:
Debounce time: 3.000 ms Deglitch time: 0.000 s
Overload Detection:
Suppression time: 50.00 ms
MICOM P441 P442 P444 \ Relay Parameter Section \ SETTING GROUP \ POWER SWING
Description Name Value
Delta R Delta R 0.50 Ohm
Delta X Delta X 0.50 Ohm
IN> Status IN> Status Enabled
IN> (%Imax) IN> (%Imax) 40.00 %
I2> Status I2> Status Enabled
I2> (%Imax) I2> (%Imax) 30.00 %
ImaxLine> Status ImaxLine> Status Enabled
ImaxLine> ImaxLine> 3.000 A
Delta I Status Enabled
Unblocking delay Unblocking delay 30.00 s
Blocking Zone Blocking Zone 00000
Z1&Z1x Blocking Z1&Z1x Blocking Disabled
Z2 Blocking Z2 Blocking Disabled
Z3 Blocking Z3 Blocking Disabled
Zp Blocking Zp Blocking Disabled
Z4 Blocking Z4 Blocking Disabled
Out of Step Out of Step 1
Stable Swing Stable Swing 1
MICOM P441 P442 P444 \ Relay Parameter Section \ SETTING GROUP \ AIDED DEF
Description Name Value
Aided ch. Status Aided ch. Status Enabled
Polarisation Polarisation Zero Sequence
V> Voltage Set V> Voltage Set 1.00 V
IN Forward IN Forward 0.10 A
Time Delay Time Delay 0.00 s
Scheme Logic Scheme Logic Shared
Tripping Tripping Three phase
Tp Tp 0.02 s
IN Rev Factor IN Rev Factor 0.60
MICOM P441 P442 P444 \ Relay Parameter Section \ SETTING GROUP \ CB FAIL & I<
Description Name Value
CB Fail 1 Status CB Fail 1 Status Enabled
CB Fail 1 Timer CB Fail 1 Timer 0.20 s
CB Fail 2 Status CB Fail 2 Status Disabled
CBF Non I Reset CBF Non I Reset CB open & I<
CBF Ext Reset CBF Ext Reset CB open & I<
I< Current Set I< Current Set 0.05 A
MICOM P441 P442 P444 \ Relay Parameter Section \ SETTING GROUP \ SUPERVISION
Description Name Value
VTS Time Delay VTS Time Delay 5.00 s
VTS I2> & I0> Inhibit VTS I2> & I0> Inhibit 0.05 A
Detect 3P Detect 3P Disabled
CTS Status CTS Status Disabled
CVTS Status CVTS Status Disabled
MICOM P441 P442 P444 \ Relay Parameter Section \ SETTING GROUP \ INPUT LABEL
Description Name Value
Opto Input 1 Opto Input 1 Opto Label 01
Opto Input 2 Opto Input 2 Opto Label 02
Opto Input 3 Opto Input 3 Opto Label 03
Opto Input 4 Opto Input 4 Opto Label 04
Opto Input 5 Opto Input 5 Opto Label 05
Opto Input 6 Opto Input 6 Opto Label 06
Opto Input 7 Opto Input 7 Opto Label 07
Opto Input 8 Opto Input 8 Opto Label 08
Opto Input 9 Opto Input 9 Opto Label 09
Opto Input 10 Opto Input 10 Opto Label 10
Opto Input 11 Opto Input 11 Opto Label 11
Opto Input 12 Opto Input 12 Opto Label 12
Opto Input 13 Opto Input 13 Opto Label 13
Opto Input 14 Opto Input 14 Opto Label 14
Opto Input 15 Opto Input 15 Opto Label 15
Opto Input 16 Opto Input 16 Opto Label 16
Opto Input 17 Opto Input 17 Opto Label 17
Opto Input 18 Opto Input 18 Opto Label 18
Opto Input 19 Opto Input 19 Opto Label 19
Opto Input 20 Opto Input 20 Opto Label 20
Opto Input 21 Opto Input 21 Opto Label 21
Opto Input 22 Opto Input 22 Opto Label 22
Opto Input 23 Opto Input 23 Opto Label 23
Opto Input 24 Opto Input 24 Opto Label 24
MICOM P441 P442 P444 \ Relay Parameter Section \ SETTING GROUP \ OUTPUT LABEL
Description Name Value
Relay 1 Relay 1 Relay Label 01
Relay 2 Relay 2 Relay Label 02
Relay 3 Relay 3 Relay Label 03
Relay 4 Relay 4 Relay Label 04
Relay 5 Relay 5 Relay Label 05
Relay 6 Relay 6 Relay Label 06
Relay 7 Relay 7 Relay Label 07
Relay 8 Relay 8 Relay Label 08
Relay 9 Relay 9 Relay Label 09
Relay 10 Relay 10 Relay Label 10
Relay 11 Relay 11 Relay Label 11
Relay 12 Relay 12 Relay Label 12
Relay 13 Relay 13 Relay Label 13
Relay 14 Relay 14 Relay Label 14
Relay 15 Relay 15 Relay Label 15
Relay 16 Relay 16 Relay Label 16
Relay 17 Relay 17 Relay Label 17
Relay 18 Relay 18 Relay Label 18
Relay 19 Relay 19 Relay Label 19
Relay 20 Relay 20 Relay Label 20
Relay 21 Relay 21 Relay Label 21
Relay 22 Relay 22 Relay Label 01
Relay 23 Relay 23 Relay Label 01
Relay 24 Relay 24 Relay Label 01
Relay 25 Relay 25 Relay Label 01
Relay 26 Relay 26 Relay Label 01
Relay 27 Relay 27 Relay Label 01
Relay 28 Relay 28 Relay Label 01
Relay 29 Relay 29 Relay Label 01
Relay 30 Relay 30 Relay Label 01
Relay 31 Relay 31 Relay Label 01
Relay 32 Relay 32 Relay Label 01
Relay 33 Relay 33 Relay Label 01
Relay 34 Relay 34 Relay Label 01
Relay 35 Relay 35 Relay Label 01
Relay 36 Relay 36 Relay Label 01
Relay 37 Relay 37 Relay Label 01
Relay 38 Relay 38 Relay Label 01
Relay 39 Relay 39 Relay Label 01
Relay 40 Relay 40 Relay Label 01
Relay 41 Relay 41 Relay Label 01
Relay 42 Relay 42 Relay Label 01
Relay 43 Relay 43 Relay Label 01
Relay 44 Relay 44 Relay Label 01
Relay 45 Relay 45 Relay Label 01
Relay 46 Relay 46 Relay Label 01
MICOM P441 P442 P444 \ Additional Information \ Relay Information \ Distance protection
Description Name Value
rel. Tol Z rel. Tol Z 5.00 %
Angle tolerance Angle tolerance 2.00 °
rel. time tolerance rel. time tolerance 1.00 %
abs. time tolerance abs. time tolerance 30.00 ms
Min. Trip time Min. Trip time 30.00 ms
Pick up / drop off ratio Pick up / drop off ratio 0.95
Tolerances:
Tol. T rel.: 1.000 %
Tol. T abs. +: 30.00 ms Tol. T abs. -: 30.00 ms
Tol. Z rel.: 5.000 % Tol. Z abs.: 0.000 Ω
Grounding factor:
kL mag.: 1.000000 kL angle: 0.000000°
Separate arc yes
resistance:
Zone Settings:
Tol.T
Label Type Fault loop Trip time Tol.T rel Tol.T abs- Tol.Z rel. Tol.Z abs
abs+
Z1 Tripping L-E 30.00 ms 1.000 % 30.00 ms 30.00 ms 5.000 % 819.2 mΩ
Z1 Tripping L-L 30.00 ms 1.000 % 30.00 ms 30.00 ms 5.000 % 630.9 mΩ
Z2 Tripping L-E 230.0 ms 1.000 % 30.00 ms 30.00 ms 5.000 % 1.638 Ω
Z2 Tripping L-L 230.0 ms 1.000 % 30.00 ms 30.00 ms 5.000 % 1.262 Ω
Z3 Tripping L-E 630.0 ms 1.000 % 30.00 ms 30.00 ms 5.000 % 2.458 Ω
Z3 Tripping L-L 630.0 ms 1.000 % 30.00 ms 30.00 ms 5.000 % 1.893 Ω
Z4 Tripping L-E 1.030 s 1.000 % 30.00 ms 30.00 ms 5.000 % 2.458 Ω
Z4 Tripping L-L 1.030 s 1.000 % 30.00 ms 30.00 ms 5.000 % 2.364 Ω
ZP Tripping L-E 430.0 ms 1.000 % 30.00 ms 30.00 ms 5.000 % 2.048 Ω
ZP Tripping L-L 430.0 ms 1.000 % 30.00 ms 30.00 ms 5.000 % 1.577 Ω
X/Ω
20
10
-10
-20
-30
-40
Comment
Test Module
Name: OMICRON Advanced Distance Version: 3.20
Test Start: 22-Mar-2019 14:20:11 Test End: 22-Mar-2019 14:20:32
User Name: Manager:
Company:
Test Settings
Test model:
Test model: constant test current ITest 2.000 A
Allow reduction of no kS = kL: no
ITest/VTest:
ZS mag.: 0.000 Ω ZS angle: 0.00 °
kS mag.: 1.000 kS angle: 0.00 °
Fault Inception:
Mode: random
DC-offset: no
Times:
Prefault: 1.000 s Max. fault: 6.000 s
Postfault: 500.0 ms Time reference: fault inception
Other:
Extended zones: not active Switch off at zero yes
crossing:
Load current enabled: no Load current:: n/a
Search Settings:
Search res. rel.: 1.000 % Search res. abs.: 50.00 mΩ
Ignore nominal no
characteristics:
Search interval: 200.0 mΩ
Test Results
Shot Test: Fault Type L1-E
|Z| Phi % % of t nom t act. Dev. ITest Result
7.767 Ω 60.00 ° n/a 30.00 ms 25.90 ms -13.67 % 2.000 A Passed
13.07 Ω 60.00 ° n/a 230.0 ms 212.4 ms -7.652 % 2.000 A Passed
16.09 Ω 60.00 ° n/a 230.0 ms 213.8 ms -7.043 % 2.000 A Passed
11.30 Ω 110.00 ° n/a 230.0 ms 214.5 ms -6.739 % 2.000 A Passed
X/Ω
30
20
10
-10
-20
-30
-40
30
20
10
-10
-20
-30
-40
Shot Details:
Parameters:
Fault Type: L3-E
| Z |: 14.48 Ω Phi: 125.30 °
R: -8.367 Ω X: 11.82 Ω
%: n/a % of:
ITest 2.000 A
Results:
t act.: 215.2 ms Assessment: Passed
t nom: 230.0 ms Dev.: -6.435 %
t min: 200.0 ms t max: 260.0 ms
V/V
80
60
40
20 t/s
-0.8 -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6
0
-20
-40
-60
-80
I/A
2.0
1.0
t/s
-0.8 -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6
0.0
-1.0
-2.0
-3.0
IL1 IL2 IL3
Trip
Start
Cursor Data
Time Signal Value
Cursor 1 0.000 s <none> n/a
Cursor 2 215.2 ms <none> n/a
C2 - C1 215.2 ms n/a
Test State:
Test passed