Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Since its foundation in 1989 AxFlow has been representing leading world producers of industrial and laboratory
pumps and their accessories in the European market.
europe
Main office
Sales office South Africa
Australia and
EDC
AxFlow Systems
New Zealand
Exclusive rights to sell via
our sales organization in France
-2-
In the Czech Republic and Slovakia AxFlow s.r.o.
offers:
-3-
AxFlow Systems
– small, medium, and large.
• appli
cation k
• desig now-how
n backg
• docu ro und
mentati
• high on
-quality
pumps,
pumps, vacuum
compre
exchan ssors, m
gers, m ixers, h
unchers eat
sensors , h omogen
and con izers,
• own trols
service
• fast
delivery
• refere of spare
nce ins parts
tallation
Europe s throug
hout
Chemical
Chemical industry
AxFlow Systems
Example: Automatic polyol dosing
TECHNICAL PARAMETERS:
& mixing system
Height: 4.8 m
Fully automatic unit for dosing and mixing of polyols, Foot-pring: 3.3 m2
which are used during production of the car seats. This Weight: 2 ton
system consists of four vessels, pneumatically actuated Capacity: approx. 3 m3/hr
dosing valves, instrumentation and mixer. The whole
process is controled by sensors which secure precise
dosing.
Accurate weight
tensometers
Accurate weight
tensometers
Main mixing
Reactant vessels detail vessel
Design Philosophy:
Massive
• Fully stainless steel construction with baseframe from
stainless steel
dimensions to fit required area
• Vessels sized to allow 1,000 kg batch
• Precision based on combination of pneumatic Rotor-Screw
dosing valves and weight metering pump
-5-
Chemical
Chemical industry
AxFlow Systems
Example: Automatic polyol dosing
& mixing system
FROM DRAWING THROUGH 3D MODELLING ALL THE WAY TO THE COMPLETE DELIVERY.
AxFlow’s scope of supply – including the storage tanks and dosing unit (behind the tanks)
-6-
Chemical
Chemical industry
Dosing units
AxFlow Systems
Example: Polyethylene glycol dosing unit
This system is used to pumping polyethylene glycol
and mixing it with water to the required concentration.
PEG is pumped to the tank by the drum pump, it is
mixed there and then is transported by two rotary
piston pumps for further processing. The whole unit is
designed according ASME norm.
Regulation valve
Agitator
Manometer
Safety valve
TECHNICAL PARAMETERS:
Height: 3.5 m
Foot-pring: 5.5 m2
Example: Chemical dosing unit Weight: 2 ton
Capacity: 8 m3/h
A dosing system with piston-diaphragm pumps
designed for chemical dosing – pressure increase in
subsoil in oil production. Pumps in Hastelloy C, PVDF
design. SS304 stainless steel frame.
Discharge line up to
160 bar
Piston diapragm
pump from hastelloy
-7-
Pharmaceutical
Pharmaceutical industry
AxFlow Systems
Example: Mobile dosing unit
Mobile system for storage and dosing in
pharmaceutical industry. Sanitary design, polished
stainless steel with maximal roughness Ra 0.5.
Metering pump
Stainless steel
odor filter
TECHNICAL PARAMETERS:
Height: 1.2 m
Foot-pring: 0.3 m2
Weight: 200 kg
Agitator
Polished jacketed
vessel
Stainless steel
chassis
Stainless steel
wheels
-8-
Petrochemical, Oil and Offshore
Petrochemical industry
Dosing systems
AxFlow Systems
Example: Antiscalant dosing system
For effective removal of lime-scale from the pipeline
surface. This unit is designed for ATEX enviroment and
according API norm.
Pulsation dampener
Manometer
Strainer
Painted frame
-9-
Food & Beverage
Food & beverage industry
Production units
AxFlow Systems
Example: Complete unit for candy re-work
The whole unit, which is for rework of candy, is made of
stainless steel and all pipes, where product flows, are
heated. Melted sweets are pumped from storage tank
by rotary lobe pump which is mounted to the tank by
rectangular flange. Product goes through strainer and
demagnetizator. The cover of the tank is automatically
opened by two pneumatically driven pistions.
Jacketed tank
TECHNICAL PARAMETERS:
Hygienic control
Height: 2.2 m cabinet
Foot-pring: 2.1 m2
Weight: 2.5 ton
Rotary piston
Capacity: 250 l/h pump
Jacketed
demagnetizator
Jacketed strainer
Check valve
Agitator with
frequency converter
- 10 -
Food & Beverage
Food & beverage industry
Dosing system
AxFlow Systems
Example: Sugar & Syrup dosing system TECHNICAL PARAMETERS:
Unit for dosing granulated sugar and syrup. Syrup is Height: 0.8 m
pumped by rotary lobe pump with seal flush system. Foot-pring: 4 m2
Granulated sugar is transported by screw conveyor. Weight: 500 kg
Capacity: 4.2 m3/h
Jacketed strainers
Drip pan
Vibration motors
Vibrating screen
Anti-clogging air
2.4 mm
flush system
Vibration motors
Hopper
- 11 -
Food & Beverage
Food & beverage industry
AxFlow Systems
Example: Scraped surface heat TECHNICAL PARAMETERS:
exchanger unit Height: 1.3 m
Foot-print: 2.4 m2
Waukesha Votator cooling unit with two cylinders on
Weight: 500 kg
the stainless steel frame. All components are mounted
Heat transfer area: 1.7 m3/h
on stainless steel base frame and during designing was
thought of hygienic requirements of food and beverage
industry. Votatore unit Heavy duty drive
CIP cleaning
inlet Hygienic switch
Hygienic
designed frame
Flow meters
Dosing Unit
Example: Automatic color dosing system TECHNICAL PARAMETERS:
- 12 -
Food & Beverage
Food & beverage industry
AxFlow Systems
Example: Mixing & dosing unit for TECHNICAL PARAMETERS:
antibacterial solution Height: 2.9 m
Foot-print: 4.8 m2
System of production and dosing of antibacterial
Weight: 905 kg
solution in Food & Beverage. Automatic dosing of
Capacity: 20 l/min
potable water and platform for manual input of powder
bag. Custom design of solution tank. Sanitary Lightnin
agitator ensures powder solution and maintaining in Top entry agitator
optimal state for the dosing.
Automatic butterfly
valve with control unit
Stainless steel
mixing tank
Control unit
Circumferential
Sanitary flow meter piston pump
- 13 -
Food & Beverage
Food & beverage industry
AxFlow Systems
Example: Clean-in-place unit
System for automatic CIP cleaning of production lines
in food industry. It includes steam heating, storing and
dosing chemical substances, vessels, base frame and
pipes made of stainless steel 316 and control cabinet
with touch display for complet control cleaning process.
Metering pump
Chemical storage
Agitator
Rotary piston
Hopper with screw pump
inside
Stainless steel
Ready for CIP wheels
cleaning
- 14 -
Vaccum pumps
Vacuum pumps
Vacuum systems
AxFlow Systems
Example: Vacuum unit TECHNICAL PARAMETERS:
Height: 1.7 m
A fluid ring vacuum pump sucks in vapours from a Foot-pring: 1.8 m2
reboiler in muesly production. The vapors cool down, Weight: 1.2 ton
condense in a plate heat exchanger, then the liquid Capacity: 22 m3/h
part is separated in a separator and pumped into a Vacuum level: 100 mbar
service liquid tank of the vacuum pump. Dried vapours
are away from the system.
Separator
Control cabinet
Nitrogen injection
Pressure sensor
Separator tank
Heat exchanger
- 15 -
Vaccum pumps
Vacuum pumps
AxFlow Systems
Example: Vacuum unit for complete TECHNICAL PARAMETERS:
methanol recirculation Height: 0.6 m
Foot-pring: 0.5 m2
Compact system with complete recirculation of service Weight: 700 kg
fluid with a separator and a heat exchanger. Capacity: 40 m3/h
Pressure sensor
Level sensor
Separator tank
Liquid ring
vacuum pump
Level of fluid
Heat exchanger
Vacuum pump
Oil cooler
Base frame
Example:
Compact
vacuum unit
Thermometer
Compact separator
Drive
Liquid ring
vacuum pump
- 16 -
Vaccum pumps
Vacuum pumps
Vacuum systems
AxFlow Systems
Example: Compressor unit - ATEX design
System for compressing hydrocarbons C1-C4 in ATEX
design. Liquid ring compressor, air/liquid exchanger,
separator, instrumentation and valves.
Pressure vessel
Level indicator
Liquid ring
compressor
Oil/air cooler
TECHNICAL PARAMETERS:
Height: 1.7 m
Foot-pring: 1.9 m2
Weight: 1 ton
Capacity: 450 m3/h
Automatic refilling of
service fluid
- 17 -
Public utilities, Water
and Wastewater
Industry / production
Other Industries
Production units
AxFlow Systems
Example: Color treatment unit
Unit for automatic pumping, mixing and cooling acrylate
colours. Duplicated vessel is made of stainless steel
and attached to the base frame where is also mounted
progressive cavity pump. Colour in vessel is mixed by
top entry mixer.
TECHNICAL PARAMETERS:
Height: 3.5 m
Foot-pring: 1.6 m2
Weight: 1 ton
Capacity: 1 m3/h
Jacketed stainless
steel tank
Stainless steel
frame
Drip pan
Butterfly valve
- 18 -
Public utilities, Water
and Wastewater
Industry / production
Other Industries
AxFlow Systems
Example: Additives dosing unit
This unit si used in paper industry for dosing additives
for proper treatment of paper products. Additives are
dosed by peristaltic pump and then mixed in agitator
with water.
Plastic pipes
Precise dosing
peristaltic pump
Flow meter
Painted frame
TECHNICAL PARAMETERS:
Height: 1m
Foot-pring: 1.1 m2
Weight: 500 kg
Capacity: 0.2 m3/h
Control cabinet
Manometer
- 19 -
AxFlow Systems - this is how we work:
AxFlow is not only the supplier of
AxFlow Systems
individual pumps or vacuum pumps and Thorough consultation with
compressors. the customer
Contact us and we will build one for you! Subsequent service and
maintenance
- 20 -
AxFlow brings you
the complete product
portfolio from SPX Flow.
SPX Flow is a global manufacturer of highly specialized, engineered fluid
handling equipment such as positive displacement and centrifugal pumps,
valves, mixers, filters, air dryers, hydraulic tools,homogenizers, separators
and heat exchangers. The products have gain their reputation in many
processing industries, mainly the food and beverage, power and energy.
SPX Flow has operations in over 35 countries and sales
in over 150 countries around the world.
- 21 -
Homogenizers
- 22 -
Homogenizers
Rannie – Gaulin –
Three-piece Mono block
valve housing
APV HOMOGENIZER
RANNIE GAULIN 185Q
- 23 -
EC 1935/2004
Rotart lobe/circumfe-rential
Other advantages:
• materials: wet parts SS316L, rotors Alloy 88
• robust design for heavy-duty applications and
trouble-free operation
• mechanical and O-ring seals
• connection size: 1”– 8”
• prepared for CIP cleaning
• option of fully stainless pump body
Industry use:
Thanks to a robust design, option of pressurized seals
according to API 53A/B, ATEX certification and option of
Armoloy coating the pumps are widely used also in the
majority of other industry applications.
universal i
Accessories:
Heated lid, ventilated lid, safety valve, various kinds
of rotors, extended ports, Armoloy coating for highly
abrasive media (hardness 78 HRC).
- 24 -
EC 1935/2004
Rotart lobe/circumfe-rential
Advantages:
• materials: wet parts SS316L, rotors Alloy 88
• robust design for heavy-duty applications and
trouble-free operation
• mechanical and O-ring seals
• connection size: 1”– 8”
• prepared for CIP cleaning
universal iII
• option of fully stainless pump body
• cuts service costs thanks to front loading seal
• design
• widest range of sealing options: O-ring, single or
double mechanical seal
• unbeaten solution for chocolate processing thanks
to EHEDG and 3-A certification and O-ring sealing
possibility
- 25 -
Screw pumps
Screw pumps
Maximum parameters
Waukesha Universal TS Series
Flow rate: 4.6 m3/h
Pressure: 25.5 bar
Temperature: 149 °C universal TWIN SCREW PUMP
Particle: 45 mm
- 26 -
MEI
EU 547/2012 EC 1935/2004 Centrifugal pumps
Features:
• hygienic and robust design
• highly energy efficient and quiet performance with
minimal vibration
• the stationary shaft seal spring is located outside APV W+ CENTRIFUGAL PUMP
product area and single mechanical seal can be
easily rebuilt into a double mechanical one
• designed for CIP and SIP
• pump materials SS316L wetted parts/SS304 the rest
• optional Ra 0.8 or Ra 0.5 polishing
• elastomers: EPDM, FPM, encapsulated FPM
• shaft seal: Carbon/SiC or SiC/SiC
- 27 -
MEI
EU 547/2012 EC 1935/2004 Centrifugal pumps
Features:
• material: stainless steel 316L
• approved by EHEDG and A3, easy CIP design
• simple shaft seal replacement
• connection from DN40 to DN125
• adjustable legs or brackets
- 28 -
EC 1935/2004
Other advantages:
• materials: stainless steel SS316, SS316L, SS316Ti, Novados
SS304L, PP, PVC, PVDF, special at request – piston/piston-diaphragm pump with a hydraulically
BALANCED diaphragm
• unique double-acting pump head
• diaphragm sealless pump with high efficiency Maximum parameters of the NOVADOS line
• hydraulic drive of the diaphragm – long life
Flow rate: 40 m3/h
• parallel dosing of several products at once
Pressure: 1,000 bar
with individual regulation
Product temperature: 150 °C
• mechanical, electronic or pneumatic stroke
regulation
• custom construction of customer systems
DOUBLE-ACTING PUMP HEAD
• patented Bran+Luebbe technology
Accessories
• combination of two pumping heads –
Safety, relief, bleed valves,
the pump also doses during the reverse
pulsation dampeners, calibration
movement of the piston
pots.
• double flow rate with the same layout
dimensions
- 29 -
Mixers
Mixers and agitators
APV Cavitator
The APV Cavitator can mix gases and liquids, liquids and
liquids, and solids and liquids at the microscopic level
which increases the mass transfer rate and accelerates
processing.
Flex-Mix Liquiverter
The Flex-Mix Liquiverter is specially designed for products
with low to medium viscosity in order to obtain a fast APV Cavitator
mixing of powders and particles with liquids.
Advantages:
• up to 3,000 litre – batch production.
• sanitary design for CIP cleaning
Flex-Mix Liquiverter
• all products in touch with the end product are made
of stainless steel AISI 316.
- 30 -
Mixers
Mixers and agitators
Flex-Mix Power
High shear, stand-alone, in-line mixer, suitable for
processing liquid/liquid and liquid/gas dispersions.
Optional aseptic mixing.
Flex-Mix Power
Flex-Mix Processor
Special mixing agitator design for gentle processing and
protection of product integrity.
Flex-Mix Processor
- 31 -
EC 1935/2004
Mixers
Mixers and agitators
SanStar Series
Compact stainless steel sanitary mixers.
Maximum parameters
Power: 0.18 – 2.2 kW
Speed: 84 – 1,800 rpm
S-Series – Nettco
Economical sanitary stainless steel portable and fixed
mount mixers.
• designed for dairy, beverage, oil, food and more
• wide range of impellers and mounting options
• shaft lenghts up to 2,100 mm
• can be used to mix tanks ranging in volume from
Lightnin Nettco S-series
100 to 20,000 liters
Maximum parameters
Power: 0.18 – 2.2 kW
- 32 -
EC 1935/2004
Mixers
Mixers and agitators
ECL Series
Industrial portable top entering mixers.
• electric / pneumatical drive with power from 0.25
to 4 kW
• wide range of impellers and mounting options
Series 10 Lightnin
Industrial portable top entering mixers. Heavy duty ECLM5Q series
industrial mixers.
• open / closed tank models available
• operation up to vessel temperature 200 °C
Lightnin Impellers
The core of every mixer is the impeller. Lightnin offers
variety of impellers depending on properties of your
process. There are impeller for high or low viscosity
fluids, for flow with high or low Reynolds number and
high or low shear rate.
- 33 -
Mixers
Mixers and agitators
TMH Series
Advantages:
• compact and durable
• high efficiency impellers for optimum mixing and
power savings
• positive shut off device allows mechanical seal and
bearing changes under full tank conditions
• tooth belt for long life and positive engagement
between motor and mixer shaft
• all 316 stainless steel wetted parts construction
TMH SERIES
• maintenance-free, long life bearings
• bearing system minimizes seal deflection
• single sleeve mounted mechanical seal
• 4” ANSI mounting flange and other cover plates are
available
- 34 -
Heat exchangers
HEAT EXCHANGERS
Heat exchanger is a device used to transfer heat Tube-in Tube/Tubular heat exchangers
between two or more fluids. They are widely used • designed for heating and chilling of sludge
in chemical and petrochemical plants, food and containing fibres and particles, product medium
beverage industry or power stations. There is a variety inside the tube flows in counter current to the
of different types of heat exchangers. Their selection service medium
• complete welded design ensures high working
depends mainly on type of fluid to be chilled or heated
pressures and temperatures
and parameters of process itself.
Scraped surface heat exchangers
Plate heat exchangers
• tubular construction with motor-driven shaft with
• contains many thin separated plates with very
blades
large heat transfer area, suitable for non-viscous
• for chilling/heating, controlled crystallization or
medium with low content of particles
aseptic sterilization of highly viscous and non-
• high thermal efficiency
homogenous products, product is scraped from the
Fully welded exchangers cylinders with the rotating blades
• industrial heavy-duty execution with small foot-print
• for very high temperatures and pressures
• highest thermal efficiency
Waukesha Votator II
For in-line cooling, heating, controlled crystallization,
polymerization, plastification and septic sterilization of
viscous and non-homogenous products not only in the
food industry. Available separately or within a system.
Other advantages:
• materials: SS316, sanitary design
• compact design for vertical or horizontal assembly
• high efficiency of heat exchange compared
to plate exchangers
• single and double mechanical seals
• heat exchange area 0.28–1 m2 per cylinder
(degree)
Maximum parameters
Viscosity: 1,000,000 cP
Flow rate: 9 m3/h VOTATOR LD –
Votator ii vertical CONFIGURATION
Pressure: 41 bar
Temperature: 210 °C
- 35 -
Scraped surface heat exch.
Scraped surface heat exchangers
RT Series
Heavy-duty heat exchangers.
HDRT and HEXRT heat exchangers are designed to
handle highviscosity products in heating, cooling and
freezing application. The RT appellation means
that the gear motor is flanged direct on to the
cylinder module.
Advantages:
• applicable in the dairy and food industries
APV S10 3.3.A.2 SSHE rt serie
• abrasive resitant and aseptic seal
• cylinder made of SAF 2205 duplex steel and
dasher of AISI 316
HT Series
Light and medium duty heat exchanger. Horizontal
cylinder arrangement mounted on a frame. The dasher
is supporte dat both ends outside the product area,
which avoids any axial forces on the gear motor.
Advantages:
• applicable in the dairy and food industries- product
pressure
• cylinder made of SAF 2205 duplex steel and
dasher of AISI 316
APV SSHE VT HT Vertical
Maximum parameters of HT Series
Flow rate: 5 m3/h
VT+/HT+ Series
Advantages:
Designed to operate under harsh conditions where
• horizontal / vertical design
other heat exchanger technologies can fail or cannot
• used for heating,
sustain operational efficency over a longer period.
cooling, crystallization,
pasteurization and
sterilization
• short CIP/SIP time
• material of product wetted
parts in AISI 316L
• can handle acidic and
abrasive products APV VT+ SERIES
- 36 -
Plate Heat Exchanger
Advantages:
• plate material: SS304, SS316, SS316L, Titanium
• wide variety of plates depending of used medium
• application in sanitary, chemical, industrial and
power industry
• designed for use of effective CIP, removing of typo
films or scaling deposits
• efficient design of heat transfer area reduces
fouling caused by dirt and debris
• both painted and stainless steel frames available
• ParaWeld: optional semi-welded execution for
APV Heat Exchangers
agressive liquids and refridgerants”
• DuoSafety: optional doubled plates for extra safety
in pharma industry Duo Safety plate
2 x 0.35 mm
Un-safe
Maximum parameters product
Maximum parameters
Pressure: 30 bar
Temperature range: -50 to 195 °C
Maximum parameters
Pressure: 40 bar
Fully Welded APV Hybrid
Temperature range: -200 to 400 °C
- 37 -
Tubular heat exchangers
Filters
Filters
Maximum parameters
Pressure: 50 bar
Filtrations: 10 microns AIRPEL SELF-CLEANING FILTERS
- 38 -
Valves
Valves
APV valves
Are known for its sanitary design. They are widely pneumatically. However they meet requirements of
used in food and beverage industry because of their mentioned automatic production because of option
capability to ensure product safety. Most of them are of a special APV Control units, which is basically
CIP capable and made of AISI 316L stainless steel. pneumatic actuator with solenoid elements, sensors
and indicating diodes. They can be fully integrated to
APV Valves are suitable for modern automatic your process and you have it always under the control.
production. They can be actuated either manually or
On/Off Valves
- 39 -
Valves
Valves
On/Off Valves
DKR
Mixproof double seat ball valve.
Advantages:
• safe separation of two fluids when valve closed
• the leakage chamber can be flushed with water or
CIP liquids or sterilized with steam
• water hammer safe design
• full bore provides no pressure drop and the valve is
„piggable“
Parameters:
• size from DN25 to DN125, sizes can be mixed
• buttweld connections
• product wetted parts material – AISI 316L
• seal material available: EPDM, HNBR, FPM, VMQ
DKR SERIES
SW Series
Hygienic, highly versatile valve.
Advantages:
• ball shaped housing design enhances cleanability
without sump areas
• fully drainable
• maintenance free and interchangeable actuators
Parameters:
• size from DN25 to DN150
• product wetted / non wetted parts material AISI
316L/AISI 304
• seal materials EPDM, HNBR, FPM, VMQ
• process connections:
– buttweld
– clamp
APV delta sW4 serie
- 40 -
Valves
Valves
On/Off Valves
SW-mini Series
Hygienic, highly versatile fractional size valve.
Parameters:
• size from DN10 to DN20
• product wetted / non wetted parts material AISI
316L/AISI 304
• seal materials EPDM, HNBR, FPM, VMQ
• process connections:
– buttweld
– clamp
SWcip4
Single seat valve for CIP applications.
Advantages:
• cost-efficient double seal valve with design based
on classic APV mixproof valves
• safe separation of media ensured by two serial
seat seals
• visual seat leakage detection via leakage valve to
the side
Parameters:
• size from DN25 to DN150
• buttweld connection
• product wetted parts material – AISI 316L
• seal material available: EPDM
SWcip4 SERIES
AP Series
Aseptic single seat diaphragm fractional size valve.
Advantages:
• mechanical blocking mechanism – optimized
seat compression by defined spring load on
hand actuator to avoid set overstress and allow
maximum lifetime
Parameters:
• size from DN10 to DN20
• product wetted / non wetted parts material AISI
316L/AISI 304
• seal material PTFE
• process connections:
– clamp APV delta AP1 serie
– buttweld
- 41 -
Valves
Valves
On/Off Valves
MS Aseptic Diaphragm Series
Aseptic single seat valve with diaphragm supporting
system.
Advantages:
• flexible flat diaphragm sealing design
• single layer PTFE TFM 1705 chemically inert
diaphragm material (FDA, USP Class IV standard)
Parameters:
• size from DN25 to DN100
• product wetted / non wetted parts material AISI APV DELTA MS4 serie
316L/AISI 304
• seal materials EPDM, HNBR, FPM, VMQ
• process connections:
– buttweld
– clamp
SD4 series
Mix proof double seal valve. Used for safe separation of
incompatible media.
APV DELTA MSp4 serie
Advantages:
• single shaft design with two seals and annular
space in between which provides a leakage
chamber for safe separation
• in case of damage of the seat seals, the leakage
will be drained via the leakage valves to the atmos-
phere (leakage chamber is closed or opened to the
atmosphere by the two leakage discharge valves)
• the directed flow of the cleaning liquid provides for
a perfect cleaning of the whole leakage chamber
Parameters:
• size from DN25 to DN100
• process connections - buttweld
• product wetted parts material – AISI 316L
• seal material standard EPDM
APV DELTA SD4 serie
APV DELTA SD4 serie
- 42 -
Valves
Valves
DE3
Ball shaped spring loaded valve body with smooth
passages, Mixproof double seat valve with two
independently working valve shafts together with the
leakage chamber ensure safe separation of two fluids.
Advantages:
• fully balanced design, water hammer safe design
• independent seats, no seat lifting
• maintenance of valve does not require air supply
Parameters:
• size from DN40 to DN150, sizes can be mixed
• buttweld connections APV delta DE3 serie
APV delta DE3 serie
• product wetted parts material – AISI 316L
• seal material standard EPDM
DA3+
Ultra-hygienic changeover double seat valve with seat
lift function.
Advantages:
• the seat lifting function ensures efficient cleaning
of the leakage chamber
• minimum consumption of cleaning liquids due to
optimised CIP flow during seat lift
• maintenance of valve does not require air supply
• low weight and compact design, safe against water
hammer
Parameters:
• size from DN40 to DN150, sizes can be mixed
• buttweld connections
• product wetted parts material – AISI 316L
• seal material combination EPDM/PTFE, HNBR,
PTFE, FPM/PTFE and VMQ/PTFE
- 43 -
Valves
Valves
D4/DA4
Latest inovation in APV valves. New series D4/DA4
further improve premium offering of mixproof double
seat valves - DE3 and DA3+.
Advantages:
• lower air consumption
• even lower CIP fluid losses
• fully enclosed execution
3 valve versions:
D4 NSL – basic double seat valve (no seat lifiting)
D4 SL – double seat valve with seat lifting
DA4 – ultrahygienic double seat valve with seat
lifting and minimal CIP losses
APV delta Da4 serie
Control units
- 44 -
Valves
Valves
safety Valves
VRA Vacuum relief valve
For protection of tanks/vessels against vacuum.
Parametres:
• sizes: DN50, DN100, DN150
• product wetted / non wetted parts material AISI
316L/AISI 304
• seal materials EPDM, HNBR, FPM, VMQ
SI Safety Valve
The spring-loaded full-stroke safety valve APV SI2 is
approved for use with fluids and gases.
Parameters:
• size from DN25 to DN100
• product wetted / non wetted parts material AISI
316L/AISI 304
• seal materials EPDM, HNBR, FPM, VMQ
• manual or pneumatic seat lift
- 45 -
Valves
Valves
check Valves
reflux of liquids into the pipeline must be prevented.
sampling Valves
With these valves bacteriologically safe samples can be
taken directly from the pipeline.
PR Sampling valve
Prevention of infection thanks to a PTFE shaft, no dead
pockets in valve body.
Advantages:
• with visual position indicator or proximity sensor
Parameters:
• size from DN25 to DN100
• product wetted / non wetted parts material AISI APV delta PR serie
316L/AISI 304
• process connections – buttweld
- 46 -
Valves
Valves
Regulation Valves
For securing constant flow and pressure during your
processes.
- 47 -
Product portfolio by
product category
- 48 -
EC 1935/2004
Peristaltic/hose pumps
Other advantages:
• robust construction for permanent trouble-free
operation up to 16 bar; APEX up to 8 bar
• developed for economical pumping of abrasive and
chemically aggressive liquids
• fast hose replacement
• patented direct-coupled mounting with APEX 28 / APEX 35 – APEX LINE EXTENSION FOR HIGHER FLOW
RATES
unparalleled durability
• duplicated design – space saving
Bredel 40
- 49 -
EC 1935/2004
Peristatic/hose pumps
Accessories:
Filling needles, racks, external switches, hose
couplings. LoadSure for easy replacement.
Tubes:
Selection of different materials to ensure mechanical
life and chemical compatibility with a pumped medium:
MARPRENE, PUMPSIL, BIOPRENE, NEOPRENE,
STA-PURE PFL, STA-PURE PCS, PUREWELD XL.
300 LINE, model 620
QDOS 30 – 60 – 120
- 50 -
API
674
Piston p.
Piston-diaphragm pumps
Other advantages:
• materials: SS316, cast iron, brass, PP, PVDF,
Hastelloy-C, Kalrez
• multi-diaphragm, piston, sealless pump with high
efficiency
• Kell-Cell – anticavitation system – prevention of
pump damage by cavitation
• hydraulic drive of the diaphragm – long life HYDRA-CELL G line – new size g66
• process and dosing design
• connection size: 1/2“ to 2½“
Maximum parameters of the G line
• P line for dosing, T line complying with API 674
Flow rate: 15 m3/h
Accessories Pressure: 172 bar
Safety, relief, bleed valves, oil cooler, pulsation damp- Product temperature: 120 °C
eners, control unit with a control panel for exact dosing.
Industrial use:
Thanks to the robust construction and material
possibilities of the pump (e.g. Kalrez diaphragms)
it is specially suitable for heavy-duty chemical
applications, but also for mining.
- 51 -
API
674
Other advantages:
• designed for low flow rates and high pressures
• dry run capability
• seal-less design
• available with manual flow adjustment
• integral relief valve for pump protection
• compact small footprint design
• applicable in hazardous areas (ATEX) MT8 SERIES
Materials:
• pump head: Stainless steel/Hastelloc C/PVC/PVDF
• elastomers: PTFE
Connections:
1/4” BSPT or NPT thread
Wanner accessories
Wanner offers variety of top quality original accessories
for safe high-pressure dosing:
– Safety valves
– Backpressure valves
– Airbleed valves
– Pulsation dampeners
Materials:
SS316, PP, PVDF, Nickel, Alloy, Brass, Hastelloy C, PTFE
Wanner safety valves
Connections:
1/4“ to 2“
- 52 -
API
676
PC pumps
Progressive cavity pumps
Other advantages:
• materials: cast iron, SS316, SS316L
• developed for industrial applications for the
pumping of viscous and abrasive liquids
• connection size: DN 25 to DN 200 EPSILON LINE WITH A FLEXIBLE SHAFT (FLEXISHAFT)
• EZSTRIP version with easily removable chamber for
easy servicing without piping disassembly
MONO FLEXISHAFT
COMPACT pump of a simple joint construction • patented Mono flexible shaft dealing with
with longer life eccentric movement without complicated
EPSILON pump for high load with a flexible shaft shaft mounting
(Flexishaft)
• significantly longer rotor life
WIDETHROAT pump with a rectangular hopper and
screw feeder for highly viscous non • no need of shaft lubrication – no product
flowing media (drained sludge, paste, contamination
purée etc.)
API 676 pump complying with API 676 standard
G-Range, M-Range, Merlin, CP – economy lines for low
flow rates.
Maximum parameters
Flow rate: 420 m3/h
Pressure: 24 bar
Product temperature: 90 °C
UNIVERSAL PARTS
– quality spare parts for SEEPEX, NETZSCH, PCM, ALWEILER,
ROBBINS & MYERS, BORNEMANN, ORBIT, MOYNO pumps
- 53 -
Gear pumps
Gear and vane pumps
Other advantages:
• materials: cast iron, ductile iron, steel, SS316
• internal gear – maximization of flow rate, minimum
parts subject to wear
• connection size: 1/4“ to 10“ in a standard design
universal seal – heavy-duty load line
• more than 100 years of tradition
• heated versions (electrically or with a heat-
conductive medium)
Maximum parameters
Flow rate: 364 m3/h
Pressure: 170 bar
Product temperature: 371 °C
- 54 -
API
676
Gear pumps
Gear and vane pumps
VIKING accessories
Lid-ease strainers
• quarter turn, easy opening breech-lock lid
simplifies routine cleaning
• inclined basket design provides low pressure drop
• top basket removal eliminates the need of draining
the strainer and minimizes product loss
• optional magnetic inserts for trapping ferrous
particles
• material: cast iron or stainless steel
• dimensions from DN20 to DN150 VIKING SUCTION STRAINER
• ports flanged or NPT thread
- 55 -
Gear pumps
Gear pumps
Maximum parameters
Flow rate: 7.5 m3/h
Pressure: 10 bar
Product temperature: 65 °C
ECLIPSE 25 NON-METALLIC
Maximum parameters
Flow rate: 2.5 m3/h
Pressure: 8.7 bar
Product temperature: 177 °C
GB LINE
- 56 -
Gear pumps
Gear pumps
Maximum parameters
Flow rate: 20 l/min
Pressure: 100 bar POMTAVA 2610-1-1
Product temperature: 135 °C
2008-3-1 series
Gear pump with a bypass block with pneumatic valve
on the rear side of the pump. This assures the best
possible flushing of the gears.
Pump characteristics and advantages:
• flushing input pressure max 5-6 bars
• pneumatic valve can be also used to relieve any
excess of pressure or for a fast refilling
• optional connecting block for two pressure sensors
threads M28 or G½“
• mechanical seal with liquid barrier
• applications: bi-component varnishes, UV
varnishes
Maximum parameters
Flow rate: 2 l/min
Pressure: 15 bar POMTAVA 2008-3-1
- 57 -
EC 1935/2004
AOD/AODD pumps
Air operated diaphragm pumps
- 58 -
AOD/AODD pumps
Air operated diaphragm pumps
Maximum parameters
Flow rate: 42 m3/h
Pressure: 8 bar
Temperature: 95 °C ASTRAEVO SERIES
Maximum parameters
Flow rate: 39 m3/h
Pressure: 8 bar
ASTRAEVO FOOD SERIES
Temperature: 95 °C
- 59 -
Centrifugal pumps
CH series
• inner circulation through hollow shaft
• ATEX
• optional:
– external circulation (increased flow rate up to
600 m3/h)
– reverse circulation (for easily evaporated liquids)
SINGLE STAGE HERMETICALLY SEALED PUMP
Maximum parameters
Flow rate: 300 m3/h
Head: 110 m
Temperature: 120 °C
CT series
• pump and motor thermally separated by adapter
• inner circulation through heat exchanger
• ATEX
Maximum parameters
Flow rate: 650 m3/h
MULTI STAGE HERMETICALLY SEALED PUMP
Head: 150 m
Temperature: 450 °C
- 60 -
Centrifugal pumps
Basis (TMB)
• compact design magnetic drive pump for corrosive
liquids
• construction materials: PP reinforced with fiberglass
(GFR-PP), E-CTFE
• process connections: BSP thread from ¾“ to 1“ or
hose connection
Parameters
Flow rate up to: 4 m3/h
Head up to: 8 m ARGAL BASIS SERIES
Temperatures: 0–60 °C
Prima (TMP)
• magnetically driven centrifugal pump for handling
corrosive fluids
• running dry capability
• construction materials: GFR-PP, E-CTFE
• process connections: flange/BSP thread from ¾“
to 1 ¼“
Route (TMR/ZMR)
• patented system which allows running dry
• construction materials: GFR-PP, E-CTFE
• mechanical seal or magnetic drive available
• mechanical seals – single or double – materials:
Carbon, SiC or PTFE
• elastomers: PTFE, FKM
• hydraulically balanced impeller – opened or closed
• process connection: NPT thread or flanges from
1 ¼“ to 2“
- 61 -
ISO
2858
Centrifugal pumps
Frontiera (TMF/TGF/ZMF/ZGF)
• chemical process centrifugal pumps of standard ISO
2858
• seal-less magnetic drive or close-coupled with
mechanical seal
• materials: GFR-PP, E-CTFE
• elastomers: FPM, EPDM
Maximum parameters
Flow rate: 100 m3/h ARGAL FRONTIERA SERIES
Head: 40 m
Temperature: 90 °C
SATURNevo (ZMS/ZGS)
• compliant ASME/ANSI B73.1 standards
• construction material: Fiberglass reinforced
polyester (FRP)
• ATEX compliant
• seal flushing available
• extra inducer option
• less NPSH required ARGAL SATURNEVO SERIES
Maximum parameters
Flow rate: 100 m3/h
Head: 60 m
Temperature: 90 °C
K2 & EQUIPRO
• ISO 9906:2012 standard, Level 2 (K2 series)
• vertical sump pumps
• wetted parts materials: PP, PVDF, antistatic PP
Maximum parameters
Flow rate: 270 m3/h
Head: 85 m
Temperature: 90 °C
- 62 -
ISO
2858
Centrifugal pumps
End-suction pumps
ACP & S series
Andritz single-stage centrifugal pump are suitable
for many different media, they can convey slightly
contaminated media. Easy maintenance, low energy
single-stage centrifugal pumps, ACP and S series
consuption, robust design – these are benefits of this
type of pumps.
Maximum parameters
Flow rate: 9,000 m3/h
Head: 190 m
Temperature: 200 °C
Other advantages:
• stainless steel body option
• many fields of application – pulp and paper
industry, waste water treatment, food industry
• high efficiency up to 90%
• suitable for media with solid content up to
consistencies up to 8 %
ISO series
ISO & ES series
These pumps are designed to convey clean liquids
without solids. They can be used for drinking water
supply or food, chemical, power or steel industry.
Maximum parameters
Flow rate: 4,000 m3/h
Head: 160 m
Temperature: 140 °C
- 63 -
ISO
2858
Centrifugal pumps
Medium-consistency pumps
Advantages:
• excellent efficiency and low energy consumption
• conveying paper stock and pulp, stock
consistencies up to 16 % bone dry
• stainless steel option with bearing housing of cast
steel
Self-priming pumps
Advantages:
• integrated vacuum pump for removing gas from the
medium for smooth transport
• application fields – sugar, pulp, paper and food
industry
• conveying vicious and high-solids media
- 64 -
ISO
2858
Centrifugal pumps
Maximum parameters
Flow rate: 800 m3/h
Head: 160 m
Temperature: 60 °C vertical submerged pump, SAT/CAT series
High-pressure pumps
For various high-pressure industrial applications like
water supply, irrigation or boiler feed are ANDRITZ
High-pressure pumps the best choice.
Other advantages:
• connection dimesions: outlet DN40/DN125 to
DN65/DN150 for inlet
• stainless steel body option
Maximum parameters
Flow rate: 850 m3/h
Head: 950 m
High-pressure pumps, MP series
Temperature: 160 °C double-suction split case pump operating as fan pump
Power: 600 kW
Maximum parameters
Flow rate: 40,000 m3/h
split case pump
Head: 1,000 m
Temperature: 80 °C
- 65 -
Centrifugal pumps
Advantages:
• ATEX certification available
• closed-coupled design
Maximum parameters
Flow rate: 2,600 m3/h
Head: 100 m
Temperature: 40 °C
Submersible pumps
Advantages:
• maintenance-free
• long service life
• high reliability
• designed to tranpsort mineral, sea, mine and submersible motor pumps
cooling water
Maximum parameters
Flow rate: 900 m3/h
Head: 800 m
Temperature: 75 °C
Advantages:
• single or multistage pumps
• available in different designs
• adjustable angle impellers
• application specific materials
Maximum parameters
Flow rate: 70,000 m3/h
Head: 120 m VERTICAL LINE SHAFT PUMPS
- 66 -
Centrifugal pumps
Options:
• additional seal expeller/impeller for higher suction
heads
• centrifugal governor for reduction of vibrations
• exchangeable wear parts
• heating and steam flush option
• welded contruction
• rubber coating
Maximum parameters
Flow rate: 2,300 m3/h
Head: 130 m
Temperature: 280 °C
MPCH DryRun
• centrifugal pump with magnetic drive
• equipped with nitrogen solids barrier for securing
right function of magnetic drive
• continuosly dry running
Application areas:
• toxic media
• liquids with solid parts
• gas – containing liquids
bungartz MPCH DryRun centrifugal pump
Maximum parameters
Flow rate: 550 m3/h
Head: 160 m
Temperature: 400 °C
- 67 -
Centrifugal pumps
Application areas:
• dosing of chemicals at the boiling point
• power industry
Maximum parameters
Flow rate: 1,200 m3/h
Head: 100 m
Temperature: 300 °C
Fields of application:
• extraction from separators
• extraction from vessels with zone 0 atmosphere
• tanker truck unloading
- 68 -
ISO ISO
2858 5199
Centrifugal pumps
Other advantages:
• materials: ductile iron, cast iron, stainless steel
SS316, Hastelloy-C, bronze and other special alloys
• standard design according to ISO 2858, 3069,
9906, 10816-3, 1940
• optionally ISO 5199 for heavy-duty chemical plants TCH – CONSTRUCTION WITH A CLOSED IMPELLER FOR CLEAN
• closed, semi-open, open, vortex impellers AND SLIGHTLY CLOUDY FLUIDS
• seals according to API requirements, choice of soft,
mechanical, cartridge seals and magnetic drives
TCH centrifugal pumps with a closed
• independent bearing case for long service life
impeller up to 2,200 m3/h and 16 bar
• TBH/GP line for LPG pumping
TCHV vertical pumps derived from the
TCH line
TCT centrifugal pumps with open vortex
impeller up to 250 m3/h and 7 bar
TCHM-TCTM monoblock pumps with closed vortex
impeller up to 500 m3/h and 10 bar
TCA single-stage pumps with fully open
impeller up to 100 m3/h and 10 bar
TCD single-stage pumps for the transport
of heat-exchange oils up to 250 m3/h
and 10 bar
TCK single-stage pumps with a magnetic
drive up to 300 m3/h and 16 bar
TCD – construction for heat-exchange oils up to 320 oC TBA self-priming multi-stage pumps
with a simple mechanical seal without cooling, derived with extra low NPSHr up to 35 m3/h
from the DIN 24258 standard of chemical pumps; bearings
are lubricated with a bearing oil and not with the pumped and 35 bar
fluid as in competitive products. TBH self-priming with low NPSHr
multi-stage pumps up to 70 m3/h
and 40 bar; GP version for LPG
pumping
TMA-TMH multi-stage pumps up to 45 m3/h
and 40 bar, alternatively
up to 350 m3/h and 64 bar
Maximum parameters
Capacity: 2,200 m3/h
TBA – self-priming high-pressure pump construction with Pressure: 16 bar
very low NPSHr, able to pump fluids at their boiling points Product temperature: 320 °C
with minimum cavitation risk; compact bearing shield, short
shaft and compact dimensions exclude vibrations, thus
extending the life of the bearings and seals.
- 69 -
Vaccum pumps
Vacuum pumps
up to 65 m3/h
TRVX single-stage vacuum pumps; the
central casing containing a suction
and a displacement port and a water
inlet was optimized; 50 % lower water
consumption; 30 % less material; 10 %
higher capacity with the same drive
power output compared to
competitive products; up to 1,050 m3/h
TRM-TRV single-stage vacuum pumps up to 270
m3/h or 500 m3/h and 33 mbar(a) BORA DRY-RUN VACUUM PUMPS
TRH-TRS single-stage/double-stage vacuum
pumps up to 3,500 m3/h Other advantages:
TRVK single-stage vacuum pumps for high • materials: SS316, cast iron
vacuum, up to 23,000 m3/h • bare-shaft and monoblock versions
TRSK single-stage vacuum pumps for medium • large range of flow rates and high vacuum option
and high vacuum, up to 30,000 m3/h • long-term experience of the producer and active
BORA dry-run vacuum pumps with rotary lubes development of new lines
up to 3,000 m3/h – in contrast to fluid
ring vacuum pumps there is no need to
use service fluid Maximum parameters
SA fluid ring compressors for pressures of Capacity: 30,000 m3/h
up to 11 bar; up to 110 m3/h Vacuum: 33 mbar abs.
- 70 -
AxFlow Service – is about keeping your
processes running
Quality, fast and professionally performed installation of pumps, design and assembly of pumping
systems and their subsequent service according to current customer needs and requirements are
the basis of efficiently and reliably operating technologies and production lines.
AxFlow provides these services directly on the operation All AxFlow service technicians and partners are regularly
site or in authorized service centres in times important to trained within product seminars of AxFlow Group or
customers and with expertise gained during almost twenty directly in production plants of suppliers.
years in the field and thanks to close cooperation with
renowned pump producers. Thanks to the technical know-how and background of our
company, we provide these services not only to products
Our customers have an advantage of guaranteed, distributed by us but also to other types of pumps and
planned and economic service solutions, thus eliminating technologies including original spare parts.
unexpected failures of technological equipment.
Our offer
TOOLS
Installation
Installations Emergency
Emergency Maintenance
and repair
Logistics
Logistics & Contracts
Contracts & Quality
Quality
- 71 -
fluidity.nonstop is a registered trademark of AxFlow Holding AB
fluidity.nonstop® is about keeping your processes running.
And it’s our promise and our commitment to a level of service
and a quality of product, performanceand expertise that has never
been bettered.
®
ACZ/S/ENG/0706/0419
the process industry and we intend to maintain that position by
working fluidly and ceaselessly to be the best.