Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Datos
Wl = 38.9 [kg/m]
shear & flexural → 606 900 984
g = 900.00 [mm]
Le = 600.00 [mm]
β1 = 0.85
bw = 400 [mm]
0.9 53.1468
Notas
C-SSW systems shall satisfy the requirements of Section H4 and the shear wall
requirements of ACI 318 including Chapter 18, except as modified in this section.
In addition to the system requirements of Section H4.4, the following shall be satisfied:
(a) In coupled walls, coupling beams shall yield over the height of the structure followed by
yielding at the base of the wall piers.
(b) In coupled walls, the axial design strength of the wall at the balanced condition, Pb,
shall equal or exceed the total required compressive axial strength in a wall pier, computed
as the sum of the required strengths attributed to the walls from the gravity load
components of the lateral load combination plus the sum of the expected beam shear
strengths increased by a factor of 1.1 to reflect the effects of strain hardening of all the
coupling beams framing into the walls.
designated as a protected zone and shall satisfy the requirements of Section D1.3.
Attachment of stiffeners, and face bearing plates as required by Section H5.5c(b), are
permitted.
Calulos
𝑛,𝐶𝑂𝑁𝑁𝐸𝐶𝑇𝐼𝑂𝑁)=4.04√(𝑓_𝑐^′ ) (𝑏_𝑤/𝑏_𝑓 )^0.66 𝛽_1 𝑏_𝑓 𝐿_𝑒 ((0.58−0.22𝛽_1)/(0.88+𝑔⁄(2𝐿_𝑒 )))
�_𝑝=0.60𝐹_𝑦 𝐴_𝑡𝑤
𝑀_𝑝=𝐹_𝑦 �
Ag = 49.6 [cm²]
a = 25.6 [cm]
Z = 636.0 [cm³]
### → Mp = 22.4 [tf.m]
Vn = 59.05 [tf.m]
###
Ix = 9174 [cm^4]
###
1.6.Mp/Vp = 605.68 [mm]
2.6.Mp/Vp = 984.22 [mm]