Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Version 2.1.0
Smart HDCVI Series DVR Quick Start Guide
Welcome
Thank you for purchasing our DVR!
This quick start guide will help you become familiar with our DVR in a very short time.
Before installation and operation, please read the following safeguard and warning carefully!
Note: All the installation and operations here should conform to your local
electric safety rules.
3. HDD Installation
This series DVR has only one SATA HDD. Please use HDD of 7200rpm or higher.
Please follow the instructions below to install hard disk.
Important
Shut down the device and then unplug the power cable before you open the case to
replace the HDD!
2
Smart HDCVI Series DVR Quick Start Guide
Note:
You can connect the HDD data cable and the power cable first and then fix the HDD in the
device.
Please pay attention to the front cover. It adopts the vertical sliding design. You need to
push the clip first and then put down.
4. Front Panel
The front panel is shown as in Figure 1.
Figure 1
Please refer to the following sheet for detailed information.
3
Smart HDCVI Series DVR Quick Start Guide
SN Name Function
1 HDD status indictor light The red light becomes on when HDD is abnormal.
Network status indicator The red light becomes on when the network
3
light connection is abnormal.
5. Rear Panel
Here we take the 8-channel series product rear panel as an example. See Figure 2.
Figure 2
Please refer to the following sheet for detailed information.
SN Icon Name Note
1 VIDEO IN Video input port Connect to analog camera, video
input signal.
2 AUDIO IN Audio input port Connect to audio input device such
as speaker.
3 VGA VGA video output VGA video output port. Output
port analog video signal. Can connect to
the monitor to view ananlog video
output.
4 Use clamp to secure the power
Power cable
cable on the device in case there is
fastener
any loss.
5 GND Ground end
6 AUDIO OUT Audio output port Connect to video output device such
as sound box.
7 HDMI High definition High definition audio and video
media interface signal output port. It transmits
uncompressed high definition video
and multiple-channel data to the
HDMI port of the display device.
8 Network port 100M Ethernet port
9 USB2.0 port Connect to USB storage device,
mouse, burning DVD-ROM and etc.
4
Smart HDCVI Series DVR Quick Start Guide
10
Power input port Input 12V DC.
6. Local Login
After system booted up, default video display is in multiple-window mode.
Click Enter or left click mouse, you can see the login interface. See Figure 3.
System consists of three accounts:
Username: admin. Password: admin. (administrator, local and network)
Username: 888888. Password: 888888. (administrator, local only)
Username: default. Password: default. (hidden user) Hidden user “default” is for system interior
use only and can not be deleted. When there is no login user, hidden user “default” automatically
login. You can set some rights such as monitor for this user so that you can view some channel
view without login.
Note:
For security reason, please modify password after you first login.
You can set to lock account or not, password login attempt times, and lock time.
Figure 3
7. Web
Open IE and input DVR address in the address column. For example, if your DVR IP is
10.10.3.16, then please input http:// 10.10.3.16 in IE address column.
System pops up warning information to ask you whether install webrec.cab control or not. Please
click yes button.
If you can’t download the ActiveX file, please modify your IE security setup.
After installation, the interface is shown as below. See Figure 4.
Please input your user name and password.
Default factory name is admin and password is admin.
Note: For security reasons, please modify your password after you first login.
5
Smart HDCVI Series DVR Quick Start Guide
Figure 4
Note
This quick start guide is for reference only. Slight difference may be found in the user
interface.
All the designs and software here are subject to change without prior written notice.
All trademarks and registered trademarks mentioned are the properties of their
respective owners.
If there is any uncertainty or controversy, please refer to the final explanation of us.
Please visit our website or contact your local service engineer for more information.