The Design and Testing of Connections in Steel Sheeting and Sections
(ECCS Publication No. 21 (1983), £8) gives recommendations for the performance and evaluation of tests to determine the ultimate load and serviceability of connections and fastenings on the basis of different types of failure in connections loaded in shear and tension. The paper describes the experimental determination of design values for the carrying capacity and of stiffness characteristics and gives design formulae for connections with blind rivets, bolts, powder actuated fasteners, self-drilling screws and self-tapping screws. Furthermore, the paper deals with the effects of elastic subconstructions.
This paper and Mechanical Fa~mcnrs for Use in Steel ~ t i n g and
Sections (ECCS Publication No. 35 (1983), £10) form a complete documentation on fasteners and fastening techniques. The latter Recommendations contain essential technical data on the fasteners and connections as well as on the experimental determination of the fastener material properties required for design.
The Recommendations on The ~ of ProlUed Sheeting (ECCS
Publication No. 33 (1983), £6), prepared after several years of discussions, give a complete view of the state of knowledge in the design of profiled sheeting, The design principles have been largely accepted by the member countries.
In addition to the design principles, the Recommendations Good
Praetige in Steel Ciaddli~aml ~ (ECCS Publication No. 34 (1983). £6) give valuable instructions and suggestions for the structural design of different types of roof and wall structures, on problems of building physics and on erection and maintenance of such elements.
By The ASCE Task Committee On Design Criteria For Composite Structures in Steel and Concrete ABSTRACT: This Commentary Complements The "Proposed Specification For Struc
Journal of Constructional Steel Research Volume 63 Issue 6 2007 (Doi 10.1016 - j.jcsr.2006.07.009) v. Marimuthu S. Seetharaman S. Arul Jayachandran A. Chellappa - Experimental Studies On Composite
Journal of Constructional Steel Research Volume 103 Issue 2014 (Doi 10.1016 - j.jcsr.2014.08.006) Hu, Hong-Song Nie, Jian-Guo Eatherton, Matthew R. - Deformation Capacity of Concrete-Filled Steel P
Journal of Constructional Steel Research Volume 103 Issue 2014 (Doi 10.1016 - j.jcsr.2014.08.006) Hu, Hong-Song Nie, Jian-Guo Eatherton, Matthew R. - Deformation Capacity of Concrete-Filled Steel P