Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
CSR Pumps
REAR PULL-OUT DESIGN: The complete rotating REPLACEMENT REAR WEAR PLATE: All pumps
element can be removed from the casing without come standard with a replaceable stuffing box
disturbing the suction or discharge piping. Fewer wear plate of 28% chrome.
crafts are required to service the pump.
MATERIALS OF CONSTRUCTION: All cast iron
SHAFT: Large diameter shafts minimise deflection construction is standard, though the wet-end
and increase packing life. parts are available in 28% chrome with a wear
resistant stainless steel impeller.
SHAFT SLEEVE: CF8M ceramic-coated stainless
steel sleeves provide a good packing surface. SPACE SAVING: Vertical pumps have sturdy mild
steel support pedestals, save space, require less
STUFFING BOX: The CSR type pump’s stuffing floor area and a less elaborate foundation. Where
box is furnished with five rings of non-asbestos units are installed with intermediate shafting,
packing and a Teflon lantern ring. The packing necessary universal joints and steady bearings are
gland is split in two halves to facilitate packing provided.
replacement and the gland bolts are made of
brass.
1
CSR Pumps | Range Charts
970 R PM 1450 R PM
40 40
35 35
Nett generated head – metres
25 25
4 x 4 x 12
20 20
6 x 6 x 14
15 15
3 x 3 x 10
10
10
4 x 4 x 12
5 3 x 3 x 10 2x2x8
5
0 0
0 50 100 150 200 250 300 350 400 450 0 50 100 150 200 250 300 350 400 450
Flow – cubic metres per hour Flow – cubic metres per hour