Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Composite Catalog
High performance
products for energy
exploration and production
This is a condensed catalog of Hydril products and equipment. GENERAL TERMS AND CONDITIONS
For more information as well as detailed product catalogs, con- All Hydril products and services are sold, leased or otherwise furnished in accordance with these General Terms and Conditions.
tact your Hydril representative, listed on the back cover of this These Terms and Conditions supersede all prior terms and conditions and shall be the sole terms and conditions which apply to
any sale, lease or other furnishing of products or services. Acceptance by Buyer, lessee or user (hereinafter collectively referred
publication, or Hydril’s web page at http://www.hydril.com. to as “Buyer”) of the products and/or services provided by Hydril pursuant to any order or request from Buyer shall be deemed
a full acceptance by Buyer of all the Terms and Conditions set forth herein. Different or additional terms proposed by Buyer are
deemed material alterations and are objected to and rejected unless agreed to by Hydril in writing.
TABLE OF CONTENTS 1. (a) Subject to the limitations hereafter set forth, Hydril warrants the products and services sold by it to be free from defects
in workmanship or material for one year from (I) shipment from Hydril’s factory in the case of products or (II) the completion of
performance of services in the case of services. Hydril’s obligation under this warranty for any products or services found by
Company Description and Capabilities Hydril to be defective in workmanship or material is limited to, at Hydril’s option, repairing or replacing such products, or
reperforming such services, or refunding the amount which Hydril received from Buyer for such products or services. In no event
Overview of Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 shall Hydril be liable for special, indirect, incidental or consequential damages including environmental damage claims,
Quality and Reliability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 WHETHER OR NOT CAUSED BY THE NEGLIGENCE OR FAULT OF HYDRIL. It is expressly agreed that THIS
WARRANTY SHALL BE IN LIEU OF ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED
Tubular Products and Service WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, WHICH ARE HEREBY
Product Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 EXPRESSLY DISCLAIMED. To the full extent allowed by law, Hydril disclaims any warranty to any persons other than Buyer.
(b) In addition, this warranty shall not apply if the product or service has been subject to misuse, negligence or accident, or has
Tubular Connection Selection Guide . . . . . . . . . . . . . . . . . . . . . . . .6 not been operated or installed in accordance with Hydril’s instructions or has been operated under conditions more severe than,
or otherwise exceeding, those set forth in the specifications for the product or service. This warranty does not extend to Hydril
Casing Connections Overview products used with components which are not manufactured or approved by Hydril. (c) Hydril does not warrant that its products
Casing Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 or services meet the requirements of any safety code of any state, municipality or other jurisdiction or that they will perform as
anticipated or desired by Buyer and Buyer assumes all risk and liability whatsoever resulting from the use thereof, whether used
SuPreme LX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 singly or in combination with other machines, apparatus, or equipment. (d) Products furnished by Hydril but not manufactured
Mac-II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 by Hydril will carry only the warranty of the manufacturer of such products, if any. Hydril does not warrant any products not
manufactured by Hydril. (e) Products and services shall be subject to Hydril’s stated manufacture variations. All tables published
Series 500 Type 563 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 by Hydril are based upon information believed reliable; however, Hydril does not guarantee accuracy of same. All measurements
and weights set forth in such tables are subject to reasonable tolerance variations. (f) Any claim on account of defective
Series 500 Type 521 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 materials or services, shall conclusively be deemed waived by Buyer, lessee or user unless (I) Hydril is promptly given notice in
Series 500 Type 511 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 writing of any such defect during the warranty period set forth in (a) above; (II) Buyer has kept such products or results of
services in condition so that Hydril can examine same; and (III) no machining, bending, welding, heating or altering of any kind
Tubing Connections Overview is done to said products or results of services after same are performed or shipped from Hydril’s factory.
Tubing Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 (g) The liability of Hydril for any loss or damage in any way resulting to Buyer or any other person from any failure of
a product or service to conform to order or specification, or on account of breach of warranty, or NEGLIGENCE or
CS,PH-6, PH-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 failure to conform to any standard of care in anything done or omitted by Hydril or any employee or agent, or on
account of patent infringement, shall not in any event exceed the amount which Hydril received from Buyer for the
Series 500 Type 533 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 product or service found to be defective. Where other manufacturers’ or suppliers’ products used in Hydril’s products
Series 500 Type 563 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 prove defective, Hydril’s liability shall exist only to the extent that Hydril is able to recover from such manufacturers or
suppliers for said defects. The foregoing applies whether or not such damage was caused by the negligence or fault of
Series 500 Type 501 and Type 531 . . . . . . . . . . . . . . . . . . . . . . . .30 Hydril. (h) Hydril’s liability for damage to or loss of property of Buyer or others during performance of work thereon by Hydril or
Series 500 Type 561 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 while in Hydril’s possession shall not exceed the price received by Hydril for its work on the article lost or damaged whether or
not such damage was caused by the negligence or fault of Hydril.
Series 500 Wedge ThreadTM Tool Joint . . . . . . . . . . . . . . . . . . . . . .32 2. Hydril retains the right to make substitutions and modifications to its product or services providing that said changes do not
affect the performance of those items.
Pressure Control Products 3. Hydril retains for itself all proprietary rights in and to all designs, engineering details and data concerning the services or
Application Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 products sold by it.
4. Any taxes or charges which Hydril may be required to pay or collect under any existing or future law upon or applicable to
Annular Blowout Preventers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 the sale, purchase, lease, furnishing, manufacture, processing, transportation, delivery, storage, use or consumption of the
Ram Blowout Preventers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 product or services shall be for the account of Buyer.
5. Failure of Hydril to enforce any of these conditions or to exercise any right arising from the default of Buyer, shall not affect
Compact Blowout Preventers . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 or impair Hydril’s rights in case such default continues or in the event of any subsequent fault of Buyer nor shall failure
constitute a waiver of any of these conditions.
Diverters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 6. (a) Hydril shall make delivery of all products F.O.B. the designated shipping point as specified in the quotation. Hydril’s
Subsea Blowout Preventer Control Systems . . . . . . . . . . . . . . . . .40 liability for any damage or loss incurred during shipment ceases upon delivery of the product to the carrier. Products stored at
the request of the Buyer shall be so stored at the risk of Buyer. Buyer shall pay Hydril reasonable storage charges and shall
Marine Drilling Risers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 reimburse Hydril for any additional sales and/or use tax liability caused by such storage. (b) Hydril is not liable for delays in
Surface Blowout Preventer Control Systems . . . . . . . . . . . . . . . . .41 delivery or failure to make delivery caused by the elements, acts of God, lack of or inability to obtain materials, fuel or supplies,
acts of Buyer, acts of civil or military authorities, breakdown of equipment,differences with workmen, fire, flood, or other
High Performance Chokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 casualty, labor shortages, governmental regulations or requirements, orders bearing priority rating established pursuant to law,
shortages or failure of raw materials, supplies, fuel, power or transportation, or other causes beyond the reasonable control of
Pulsation Dampeners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 Hydril, whether similar or dissimilar to those enumerated, and whether or not foreseeable. (c) Hydril shall maintain a purchase
Kellyguard Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 money security interest in the products for any portion of the purchase price not paid at the time of delivery and shall retain this
interest until Buyer has paid the full purchase price.
Checkguard Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 7. Subject to the limitations set forth in Paragraph 1 above and in this Paragraph 7, Hydril shall indemnify and hold harmless
Bettis Drill Pipe Protectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 Buyer from and against all claims, suits, actions, and costs for patent infringement (excluding any consequential damages,
liabilities, costs, and loss of revenue or profit resulting from loss of use of the product, but including costs of replacing the
Rototec Drill Pipe/Casing Protectors . . . . . . . . . . . . . . . . . . . . . . .48 infringing product or otherwise curing the infringement), provided that: (a) Buyer shall give Hydril prompt written notice of any
suit for or claim of infringement; and (b) Hydril’s liability under this indemnity shall not exceed the amount received by Hydril from
Bettis Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 Buyer for such product. This indemnity shall not apply to any product not manufactured by Hydril or to any product made, in
Elastomer Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 whole or in part, to Buyer’s specifications, and also shall not apply to the use of a product in combination with other materials in
such a manner that the combination (and not the product manufactured by Hydril) is the basis for the claim of infringement. Hydril
Overhaul and Repair Services, Remanufactured Equipment . . . . .51 shall be entitled, at its option, to settle or compromise any claim or suit for infringement and to intervene in and/or to control the
World-Wide Sales, Service and Manufacturing Locations . . . . . . . .52 defense of any infringement suit. The indemnity in this Paragraph 7 is in lieu of any other warranty or indemnity, express or
implied, with respect to infringement.
8. The partial invalidity of any of these Terms and Conditions arising by operation of law shall not affect the validity and
applicability of the remainder thereof.
9. No statement or recommendation made or assistance given by Hydril or its representatives to Buyer or its representatives
Hydril is a registered trademark and service mark. shall constitute a warranty by Hydril or a waiver or modification of any of the provisions hereof or create any liability for Hydril.
There are no understandings or agreements between Buyer and Hydril relative hereto which are not fully expressed herein.
GK, GL, Checkguard, Bettis, CS, and CB are registered trademarks of The General Terms and Conditions contain the entire agreement of the parties regarding the subject matter hereof.
Hydril Company. 10. With respect to any tubular goods acquired from Hydril by Buyer, Buyer agrees to handle such goods in accordance with
API Publication RP 5C1, Care and Use of Casing and Tubing, including without limitation § 6.3 thereof, Storage, and with good
PH-4, PH-6, CRA, HTC, TAC, A-95, SuPreme, MAC, SLX, Series 500, industry practice, and to defend, indemnify and hold harmless Hydril from any loss, cost or damage resulting from Buyer’s failure
Wedge Thread, Series 2000, FJ, Flatpak, Sentry, Compact, Kellyguard, to perform its obligations under this section 10.
Valvcon, PASAFE and Rototec Friction Reducer are trademarks. 11. Buyer agrees to transmit a copy of the Terms and Conditions set forth herein to any and all persons to whom
Buyer sells, leases or otherwise furnishes the products and/or services provided Buyer by Hydril and to obtain such
Hydril Company reserves the right to make changes in products and person’s agreement thereto, and Buyer agrees to defend and indemnify Hydril for any liability, loss, costs and
attorneys’ fees which Hydril may incur by reason, in whole or part, of failure by Buyer to transmit the Terms and
specifications at any time, without notice. Conditions as provided herein, whether or not such damage was caused in whole or in part by the negligence or fault
of Hydril.
Copyright 1997, Hydril Company. All rights reserved. 12. These General Terms and Conditions and any Special Conditions which may apply shall be construed under and governed
by the laws of the State of Texas, U.S.A. To the extent the laws of any other jurisdiction are held to apply, Buyer hereby waives
to the full extent permitted under such laws all rights given Buyer under such laws which are not also afforded by the laws
of the State of Texas.
13. Buyer acknowledges that these General Terms and Conditions include provisions for the indemnification and/or
exoneration of Hydril against the consequences of its own negligence or fault, and agrees that these General Terms
and Conditions comply with the express negligence rule are conspicuous and afford fair notice.
6’ 97 HYDRIL COMPANY, HOUSTON, TEXAS
2
Serving The Needs Of Energy Producers For 65 Years
Reliable sources of energy are essential in today’s world. Extracting
oil and gas from beneath the earth and seas of the world means
coping with extremes of pressure and temperature. This service
requires products which meet the highest quality standards of any
industry. Such products can only be designed and built by skilled
and experienced personnel, using the latest technological tools.
For 65 years Hydril has pioneered in providing high quality
innovative pressure control products used in extremely
hostile conditions.
• Blowout preventers and control systems made by Above: The Polar Pioneer semisub-
Hydril allow development of energy resources in mersible is equipped with Hydril
blowout protectors. (Photo courtesy
today’s most demanding drilling environments. Transocean Offshore Inc.)
Whether used in workover rigs or at the deepest
subsea sites, Hydril’s pressure control systems are
relied on by many of the world’s leading compa-
nies.
• Research, development, support and service are Above: A Hydril compact ram BOP
high priority segments of Hydril’s business. To stack, on board the drillship
provide customers with the products needed for Discoverer Seven Seas. (Photo cour-
tesy Transocean Offshore Inc.)
drilling operations, Hydril collects and analyzes
data gathered in customer support operations as Left: Hydril drill pipe, casing and
well as customer feedback on their special needs. tubing connectors are used around
the world, under the most difficult
Then they utilize that information to guide develop- conditions.
ment of new technologies and improved products.
3
Quality And Reliability Designed In, Tested
And Proven In Use
Our special expertise is in our ability to
provide equipment which meets or exceeds
specifications, even when operating under
severe conditions.
State of the art techniques with modern Above: Professional assistance is available to
facilities and instrumentation are used all Hydril customers. Specialists provide the
details necessary to assure trouble-free
to analyze our product designs. Where drilling operations.
needed, destructive tests are employed
to determine absolute operating limits.
Pressure, temperature, and other stress
routines help reveal possible weaknesses
before the planned product is offered to
customers. Sophisticated finite element
analysis computer models also aid in
identifying and correcting potential prob-
lems before the product design reaches
the manufacturing floor.
Above: For prompt response to
special requirements, Hydril utilizes the
At the manufacturing stage, precision most modern design techniques.
machines, backed by Hydril’s intensive Above: Hydril products are tested well beyond
Special orders can be tailored to meet
exacting customer requirements.
quality management program, assure specification limits. Here a system for
multiplex control of BOP stacks is lifted
uniform quality and reliability. from a chamber where tests have been
Computer tracking throughout conducted under pressures equivalent
to 10,000 foot sea depths.
the quality assurance process
enhances the efforts of skilled
and experienced personnel.
4
Tubular Application Index
Tubular Products
Surface Casing
Series 500 Type 563 ................16
Series 500 Type 521 ................18
Intermediate Casing
SuPreme LX .............................12
MAC-II ......................................14
Series 500 Type 563 ................16
Series 500 Type 521 ................18
Liners
SuPreme LX .............................12
MAC-II ......................................14
Series 500 Type 521 ................18
Series 500 Type 511.................20
Contact any location listed on the back cover of this catalog for detailed product data sheets and brochures. 5
Connection Selection Guide
1 1.80 .133 CS
1 2.25 .179
6
Connection Selection Guide
Tubular Products
5.500 15.50 .275
5.500 17.00 .304 SuPreme LX TYPE 533
5.500 20.00 .361
5.500 23.00 .415
5.500 26.00 .476
5.500 26.80 .500
5.500 28.40 .530
5.500 29.70 .562
5.500 32.00 .612
5.500 32.60 .625 TYPE 563
5.500 35.30 .687
5.500 38.00 .750 MAC-II
5.500 40.50 .812
Pressure Control
6.625 40.20 .625
6.625 43.70 .687
6.625 47.10 .750
6.625 50.40 .812
6.625 53.70 .875
6.625 65.80 1.125 MAC-II
Contact any location listed on the back cover of this catalog for detailed product data sheets and brochures. 7
Connection Selection Guide
8
Connection Selection Guide
Tubular Products
12.750 101.70 .797
12.750 109.10 .859
12.750 116.50 .922
12.750 123.70 .984
12.750 130.90 1.047
MAC-II
12.750 137.90 1.109
Contact any location listed on the back cover of this catalog for detailed product data sheets and brochures. 9
Casing Connections
PIN PIN
Tubular Products
BOX BOX
SuPreme LX MAC-II
10
PIN PIN PIN
Tubular Products
PIN BOX BOX
Contact any location listed on the back cover of this catalog for detailed product data sheets and brochures. 11
SuPreme™ LX Features
12
SuPreme™ LX Performance Data
Tubular Products
4.500 12.60 12.24 0.271 3.958 3.833 4.584 3.880 4.15 8.00 2.602 247 260 273 286 325 351 390
4.500 13.50 13.04 0.290 3.920 3.795 4.588 3.840 4.15 8.00 2.832 269 283 297 312 354 382 425
4.500 15.10 14.98 0.337 3.826 3.701 4.597 3.746 4.49 7.00 3.207 305 321 337 353 401 433 481
4.500 17.00 16.72 0.380 3.740 3.615 4.605 3.661 4.92 7.00 3.612 343 361 379 397 452 488 542
4.500 18.80 18.69 0.430 3.640 3.515 4.615 3.560 4.92 7.00 4.330 411 433 455 476 541 585 650
4.500 21.60 21.36 0.500 3.500 3.375 4.629 3.420 5.48 6.50 5.054 480 505 531 556 632 682 758
5.000 15.00 14.87 0.296 4.408 4.283 5.092 4.328 4.49 7.00 3.147 299 315 330 346 393 425 472
5.000 18.00 17.93 0.362 4.276 4.151 5.105 4.196 4.49 7.00 3.697 351 370 388 407 462 499 555
5.000 20.30 20.01 0.408 4.184 4.059 5.114 4.104 4.92 7.00 4.599 437 460 483 506 575 621 690
5.000 20.80 20.63 0.422 4.156 4.031 5.117 4.076 4.92 7.00 4.775 454 478 501 525 597 645 716
5.000 21.40 21.30 0.437 4.126 4.001 5.119 4.046 4.92 7.00 4.963 471 496 521 546 620 670 744
5.000 23.20 23.08 0.478 4.044 3.919 5.128 3.964 5.29 6.00 5.364 510 536 563 590 671 724 805
5.000 24.10 24.03 0.500 4.000 3.875 5.132 3.920 5.29 6.00 5.632 535 563 591 620 704 760 845
5.500 17.00 16.87 0.304 4.892 4.767 5.598 4.812 4.40 6.50 3.568 339 357 375 392 446 482 535
5.500 20.00 19.81 0.361 4.778 4.653 5.608 4.698 4.40 6.50 4.136 393 414 434 455 517 558 620
5.500 23.00 22.54 0.415 4.670 4.545 5.619 4.590 5.02 6.50 5.151 489 515 541 567 644 695 773
5.500 26.00 25.54 0.476 4.548 4.423 5.631 4.534 * 5.17 6.50 5.733 545 573 602 631 717 774 860
5.500 26.80 26.70 0.500 4.500 4.375 5.635 4.420 5.17 6.50 6.181 587 618 649 680 773 834 927
6.625 22.60 22.19 0.330 5.965 5.840 6.736 5.890 4.41 6.50 4.149 394 415 436 456 519 560 622
6.625 24.00 23.58 0.352 5.921 5.796 6.740 5.841 4.41 6.50 4.622 439 462 485 508 578 624 693
6.625 24.60 24.21 0.362 5.901 5.776 6.742 5.826 4.41 6.50 4.803 456 480 504 528 600 648 720
6.625 28.00 27.65 0.417 5.791 5.666 6.752 5.711 5.18 6.50 6.333 602 633 665 697 792 855 950
6.625 32.00 31.20 0.475 5.675 5.550 6.763 5.595 5.18 6.50 7.280 692 728 764 801 910 983 1092
6.625 33.00 32.71 0.500 5.625 5.500 6.768 5.545 5.47 6.00 7.686 730 769 807 845 961 1038 1153
6.625 34.50 34.20 0.525 5.575 5.450 6.773 5.495 5.47 6.00 8.109 770 811 851 892 1014 1095 1216
7.000 23.00 22.63 0.317 6.366 6.241 7.111 6.286 4.41 6.50 4.879 464 488 512 537 610 659 732
7.000 26.00 25.66 0.362 6.276 6.151 7.120 6.196 4.41 6.50 5.603 532 560 588 616 700 756 840
7.000 29.00 28.72 0.408 6.184 6.059 7.128 6.160 * 4.93 7.00 6.463 614 646 679 711 808 873 969
7.000 32.00 31.67 0.453 6.094 6.000 7.153 6.035 * 4.93 7.00 7.409 704 741 778 815 926 1000 1111
7.000 35.00 34.58 0.498 6.004 5.879 7.145 5.924 5.80 6.50 8.205 779 821 862 903 1026 1108 1231
7.000 38.00 37.26 0.540 5.920 5.795 7.169 5.910 * 5.80 6.50 8.961 851 896 941 986 1120 1210 1344
7.000 41.00 40.39 0.590 5.820 5.695 7.163 5.740 5.97 6.00 9.770 928 977 1026 1075 1221 1319 1466
7.000 42.70 42.55 0.625 5.750 5.625 7.200 5.675 5.97 6.00 10.279 977 1028 1079 1131 1285 1388 1542
7.625 26.40 25.56 0.328 6.969 6.844 7.743 6.889 4.72 6.50 5.570 529 557 585 613 696 752 836
7.625 29.70 29.04 0.375 6.875 6.750 7.752 6.795 4.72 6.50 6.358 604 636 668 699 795 858 954
7.625 33.70 33.04 0.430 6.765 6.640 7.762 6.685 5.49 6.50 7.624 724 762 801 839 953 1029 1144
7.625 39.00 38.05 0.500 6.625 6.500 7.775 6.545 5.49 6.50 8.861 842 886 930 975 1108 1196 1329
7.625 42.80 42.39 0.562 6.501 6.376 7.787 6.421 5.97 6.00 10.174 967 1017 1068 1119 1272 1373 1526
7.625 45.30 44.67 0.595 6.435 6.310 7.793 6.355 5.97 6.00 10.819 1028 1082 1136 1190 1352 1461 1623
7.625 47.10 46.73 0.625 6.375 6.250 7.799 6.295 6.16 5.50 11.310 1074 1131 1188 1244 1414 1527 1697
7.750 46.10 45.47 0.595 6.560 6.500 7.937 6.535 * 6.16 5.50 10.917 1037 1092 1146 1201 1365 1474 1638
7.750 48.60 48.60 0.640 6.470 6.375 7.945 6.410 * 6.16 5.50 11.421 1085 1142 1199 1256 1428 1542 1713
7.750 54.20 53.52 0.712 6.326 6.250 7.995 6.295 * 6.16 5.50 11.805 1121 1181 1240 1299 1476 1594 1771
8.625 36.00 35.14 0.400 7.825 7.700 8.764 7.745 5.19 6.50 7.575 720 758 795 833 947 1023 1136
8.625 40.00 39.29 0.450 7.725 7.600 8.773 7.645 5.19 6.50 8.745 831 874 918 962 1093 1181 1312
8.625 44.00 43.39 0.500 7.625 7.500 8.782 7.545 5.80 6.00 9.803 931 980 1029 1078 1225 1323 1470
8.625 49.00 47.99 0.557 7.511 7.386 8.793 7.450 5.80 6.00 11.204 1064 1120 1176 1232 1401 1513 1681
8.625 52.00 51.03 0.595 7.435 7.310 8.801 7.355 6.17 5.50 11.852 1126 1185 1244 1304 1482 1600 1778
8.625 54.00 53.40 0.625 7.375 7.250 8.806 7.295 6.17 5.50 12.523 1190 1252 1315 1378 1565 1691 1878
9.625 43.50 42.69 0.435 8.755 8.625 9.778 8.675 * 5.32 6.00 9.310 884 931 978 1024 1164 1257 1397
9.625 47.00 46.14 0.472 8.681 8.525 9.784 8.601 5.32 6.00 10.281 977 1028 1080 1131 1285 1388 1542
9.625 53.50 52.85 0.545 8.535 8.500 9.821 8.535 * 5.45 5.50 12.062 1146 1206 1267 1327 1508 1628 1809
9.625 58.40 57.38 0.595 8.435 8.375 9.830 8.445 * 5.45 5.50 12.974 1233 1297 1362 427 1622 1751 1946
9.750 59.20 58.18 0.595 8.560 8.500 9.956 8.570 * 6.22 5.00 12.953 1231 1295 1360 1425 1619 1749 1943
9.875 62.80 61.74 0.625 8.625 8.500 10.065 8.535 * 6.22 5.00 14.358 1364 1436 1508 1579 1795 1938 2154
10.000 66.95 66.95 0.672 8.656 8.500 10.100 8.541 * 6.22 5.00 15.091 1434 1509 1585 1660 1886 2037 2264
10.000 68.42 68.42 0.688 8.624 8.500 10.150 8.541 * 6.22 5.00 15.091 1434 1509 1585 1660 1886 2037 2264
10.750 51.00 49.50 0.450 9.850 9.694 10.914 9.770 5.46 5.50 10.765 1023 1077 1130 1184 1346 1453 1615
10.750 55.50 54.21 0.495 9.760 9.604 10.922 9.680 5.46 5.50 12.092 1149 1209 1270 1330 1512 1632 1814
10.750 60.70 59.40 0.545 9.660 9.504 10.931 9.580 5.83 5.00 13.397 1273 1340 1407 1474 1675 1809 2010
10.750 65.70 64.53 0.595 9.560 9.500 10.966 9.545 * 5.83 5.00 14.844 1410 1484 1559 1633 1856 004 2227
11.750 60.00 58.81 0.489 10.772 10.625 11.928 10.692 * 5.63 5.00 12.548 1192 1255 1318 1380 1569 1694 1882
11.750 65.00 63.97 0.534 10.682 10.625 11.965 10.670 * 5.63 5.00 14.000 1330 1400 1470 1540 1750 1890 2100
11.750 71.00 69.42 0.582 10.586 10.430 11.975 10.504 5.63 5.00 15.656 1487 1566 1644 1722 1957 2114 2348
11.875 71.80 70.19 0.582 10.711 10.625 12.072 10.670 * 5.83 5.00 15.710 1492 1571 1650 1728 1964 2121 2357
12.000 74.80 74.78 0.615 10.770 10.625 12.204 10.666 * 5.83 5.00 17.165 1631 1717 1802 1888 2146 2317 2575
12.063 78.10 78.08 0.640 10.783 10.625 12.272 10.666 * 5.83 5.00 17.365 1650 1736 1823 1910 2171 2344 2605
13.375 68.00 66.10 0.480 12.415 12.259 13.564 12.305 5.64 5.00 14.024 1332 1402 1473 1543 1753 1893 2104
13.375 72.00 70.60 0.514 12.347 12.250 13.602 12.295 * 5.64 5.00 15.289 452 1529 1605 1682 1911 2064 2293
13.375 77.00 75.33 0.550 12.275 12.119 13.609 12.196 5.64 5.00 16.774 1594 1677 1761 1845 2097 2264 2516
13.375 80.70 79.26 0.580 12.215 12.059 13.614 12.136 6.30 4.50 17.687 1680 1769 1857 1946 2211 2388 2653
13.375 85.00 82.90 0.608 12.159 12.003 13.619 12.080 6.30 4.50 18.698 1776 1870 1963 2057 2337 2524 2805
13.375 86.00 85.11 0.625 12.125 11.969 13.622 12.046 6.30 4.50 19.333 1837 1933 2030 2127 2417 2610 2900
13.500 81.40 80.03 0.580 12.340 12.250 13.740 12.291 * 5.64 5.00 18.039 1714 1804 1894 1984 2255 2435 2706
13.625 88.20 86.78 0.625 12.375 12.250 13.875 12.290 * 6.30 4.50 19.506 1853 1951 2048 2146 2438 2633 2926
Tensile strength calculated on, K-55/L-80 = 95 KSI ultimate, N-80/C-90 = 100 KSI ultimate, T-95 = 105 KSI ultimate, HC-95 = 110 KSI ultimate, P-110 = 125 KSI ultimate, Q-125 = 135 KSI ultimate, X-140 = 150 KSI ultimate.
* For this item bore will pass popular oversize drift.
Interchangeable where bracketed.
13 1/2” 81.40 Lb/Ft is interchangeable with 13 3/8” 68.00 Lb/Ft.
Contact any location listed on the back cover of this catalog for detailed product data sheets and brochures. 13
MAC™-II Features
MAC-II connections have the high pressure plus tension sion plus pressure quadrant and virtually all of the pressure-
performance required for critical application production, dominated boundary.
tie-back, and intermediate casing strings used in high
With pins and boxes machined on formed ends, rated tension
temperature, high pressure wells.
strength is achieved with minimal dependence on actual pipe
This graphic depicts the von Mises triaxial body dimensions. In addition, MAC-II connec-
equivalent stress curve for the combined tension tions have perfect (full form) hooked threads at
and internal pressure quadrant. Along with the the last engaged pin thread, retaining engagement
pipe body curve is the boundary for the MAC-II at tension loads up to the connection parting
connection. load. Full tension strength is not dependent on
retaining engagement of shallow runout threads
Hydril forms the pipe ends prior to machining,
(black threads).
generating tension critical cross-section planes
with greater thickness than in the pipe body. Through forming and the use of hooked full form
This additional thickness produces good tension threads at runout, the mode of failure and load at
strength and reduces the hoop stress created failure are more readily predictable. With this
by pressure.The hoop stresses in the critical greater predictability for both tension and combined
areas created by internal pressure increase load performance, MAC-II can be safely designed
at a slower rate than the stresses in the pipe into strings using a reduced margin for error.There
body.The greater thickness thus produces a sub- is no need to use high tension safety factors
stantially broader envelop, which encompasses much of the ten- typically used when designing with API connections.
14
MAC-II Performance Data
PIPE CONNECTION MAC-II TENSILE CAPACITY
Size (OD) MINIMUM PARTING LOAD
& Weight Plain- Wall Box Pin Make- Threads Critical
(Nominal) End Thick- I.D. Drift OD ID Up Per Section N-80/
Weight ness (Nom.) (Turned) (Bored) Loss Inch Area L-80 C-90 T-95 HC-95 C-110 P-110 Q-125
Inches Lbs/Ft Lbs/Ft Inches Inches Inches Inches Inches Inches Sq.In. 1000 1000 1000 1000 1000 1000 1000
Lbs. Lbs. Lbs. Lbs. Lbs. Lbs. Lbs.
5.000 26.70 26.66 0.562 3.876 3.751 5.247 3.796 4.94 5.00 6.106 580 611 641 672 733 763 824
5.000 29.20 29.23 0.625 3.750 3.625 5.244 3.670 4.94 5.00 6.588 626 659 692 725 791 824 889
5.000 31.60 31.67 0.687 3.626 3.501 5.241 3.546 5.75 4.00 7.000 665 700 735 770 840 875 945
5.000 34.00 34.07 0.750 3.500 3.375 5.238 3.420 5.81 4.00 7.401 703 740 777 814 888 925 999
Tubular Products
5.500 28.40 28.16 0.530 4.440 4.315 5.716 4.360 4.94 5.00 6.205 589 621 652 683 745 776 838
5.500 29.70 29.67 0.562 4.376 4.251 5.743 4.296 4.94 5.00 6.781 644 678 712 746 814 848 915
5.500 32.60 32.57 0.625 4.250 4.125 5.770 4.170 4.94 5.00 7.490 712 749 786 824 899 936 1011
5.500 35.30 35.35 0.687 4.126 4.001 5.767 4.046 5.75 4.00 7.951 755 795 835 875 954 994 1073
5.500 36.40 36.14 0.705 4.090 3.965 5.766 4.010 5.75 4.00 7.958 756 796 836 875 955 995 1074
5.500 38.00 38.08 0.750 4.000 3.875 5.764 3.920 5.81 4.00 8.418 800 842 884 926 1010 1052 1136
5.500 40.50 40.69 0.812 3.876 3.751 5.761 3.796 6.44 3.50 8.851 841 885 929 974 1062 1106 1195
6.625 36.70 36.43 0.562 5.501 5.376 6.921 5.421 5.00 5.00 8.250 784 825 866 908 990 1031 1114
6.625 40.20 40.09 0.625 5.375 5.250 6.887 5.295 5.75 4.00 9.020 857 902 947 992 1082 1128 1218
6.625 43.70 43.61 0.687 5.251 5.126 6.951 5.171 5.75 4.00 9.860 937 986 1035 1085 1183 1233 1331
6.625 47.10 47.10 0.750 5.125 5.000 6.948 5.045 5.81 4.00 10.807 1027 1081 1135 1189 1297 1351 1459
6.625 50.40 50.46 0.812 5.001 4.876 6.945 4.921 6.44 3.50 11.367 1080 1137 1194 1250 1364 1421 1535
6.625 53.70 53.78 0.875 4.875 4.750 6.942 4.795 6.44 3.50 11.931 1133 1193 1253 1312 1432 1491 1611
6.625 65.80 66.14 1.125 4.375 4.250 6.933 4.295 7.38 3.00 14.078 1337 1408 1478 1549 1689 1760 1901
7.000 41.00 40.43 0.590 5.820 5.695 7.259 5.740 5.00 5.00 9.195 874 920 965 1011 1103 1149 1241
7.000 42.70 42.59 0.625 5.750 5.625 7.300 5.670 5.00 5.00 9.807 932 981 1030 1079 1177 1226 1324
7.000 44.00 43.51 0.640 5.720 5.595 7.270 5.640 5.75 4.00 9.679 920 968 1016 1065 1161 1210 1307
7.000 45.40 45.34 0.670 5.660 5.535 7.298 5.580 5.75 4.00 10.368 985 1037 1089 1140 1244 1296 1400
7.000 46.40 46.36 0.687 5.626 5.501 7.311 5.546 5.75 4.00 10.664 1013 1066 1120 1173 1280 1333 1440
7.000 49.50 48.93 0.730 5.540 5.415 7.344 5.460 5.81 4.00 11.349 1078 1135 1192 1248 1362 1419 1532
7.000 50.10 50.11 0.750 5.500 5.375 7.343 5.420 5.81 4.00 11.349 1078 1135 1192 1248 1362 1419 1532
7.000 53.60 53.71 0.812 5.376 5.251 7.340 5.296 6.44 3.50 12.235 1162 1224 1285 1346 1468 1529 1652
7.000 57.10 57.29 0.875 5.250 5.125 7.337 5.170 6.44 3.50 12.838 1220 1284 1348 1412 1541 1605 1733
7.000 60.50 60.73 0.937 5.126 5.001 7.334 5.046 7.38 3.00 13.423 1275 1342 1409 1477 1611 1678 1812
7.000 63.90 64.14 1.000 5.000 4.875 7.331 4.920 7.38 3.00 14.063 1336 1406 1477 1547 1688 1758 1899
7.625 45.30 44.71 0.595 6.435 6.375 7.885 6.400 5.00 5.00 9.710 922 971 1020 1068 1165 1214 1311
7.625 47.10 46.77 0.625 6.375 6.250 7.921 6.295
* 5.00 5.00 10.743 1021 1074 1128 1182 1289 1343 1450
7.625 51.20 50.95 0.687 6.251 6.126 8.004 6.171 5.81 4.00 11.650 1107 1165 1223 1282 1398 1456 1573
7.625 52.80 52.62 0.712 6.201 6.076 8.003 6.121 5.81 4.00 11.796 1121 1180 1239 1298 1416 1475 1592
7.625 55.30 55.12 0.750 6.125 6.000 8.001 6.045 5.81 4.00 12.847 1220 1285 1349 1413 1542 1606 1734
7.625 59.20 59.14 0.812 6.001 5.876 7.998 5.921 6.44 3.50 13.723 1304 1372 1441 1510 1647 1715 1853
7.625 63.20 63.14 0.875 5.875 5.750 7.994 5.795 6.44 3.50 14.407 1369 1441 1513 1585 1729 1801 1945
7.625 66.90 66.99 0.937 5.751 5.626 7.991 5.671 7.38 3.00 15.051 1430 1505 1580 1656 1806 1881 2032
7.625 70.70 70.82 1.000 5.625 5.500 7.989 5.545 7.38 3.00 15.736 1495 1574 1652 1731 1888 1967 2124
7.750 46.10 45.51 0.595 6.560 6.500 8.025 6.530 5.75 4.00 10.046 954 1005 1055 1105 1206 1256 1356
7.750 48.60 48.64 0.640 6.470 6.375 8.084
*
6.405 * 5.75 4.00 10.934 1039 1093 1148 1203 1312 1367 1476
8.000 70.80 70.75 0.937 6.126 6.001 8.386 6.046 7.38 3.00 15.804 1501 1580 1659 1738 1896 1976 2134
8.063 74.20 74.20 0.980 6.103 6.000 8.450 6.045 * 7.38 3.00 16.570 1574 1657 1740 1823 1988 2071 2237
8.625 54.00 53.45 0.625 7.375 7.250 8.884 7.295 5.81 4.00 11.869 1128 1187 1246 1306 1424 1484 1602
8.625 58.70 58.30 0.687 7.251 7.126 8.970 7.171 5.81 4.00 13.249 1259 1325 1391 1457 1590 1656 1789
8.625 63.50 63.14 0.750 7.125 7.000 9.054 7.045 5.81 4.00 14.439 1372 1444 1516 1588 1733 1805 1949
8.625 68.10 67.82 0.812 7.001 6.876 9.051 6.921 6.50 3.50 15.784 1499 1578 1657 1736 1894 1973 2131
8.625 72.70 72.49 0.875 6.875 6.750 9.047 6.795 7.38 3.00 16.905 1606 1691 1775 1860 2029 2113 2282
8.625 77.10 77.01 0.937 6.751 6.626 9.044 6.671 7.38 3.00 17.766 1688 1777 1865 1954 2132 2221 2398
8.625 81.50 81.51 1.000 6.625 6.500 9.041 6.545 7.38 3.00 18.562 1763 1856 1949 2042 2227 2320 2506
8.625 83.20 83.28 1.025 6.575 6.500 9.075 6.525 7.38 3.00 18.767 1783 1877 1971 2064 2252 2346 2534
9.625 58.40 57.44 0.595 8.435 8.375 9.843 8.400 * 5.81 4.00 11.793 1120 1179 1238 1297 1415 1474 1592
9.625 59.40 58.70 0.609 8.407 8.251 9.873 8.327 5.81 4.00 13.033 1238 1303 1368 1434 1564 1629 1759
9.625 61.10 60.13 0.625 8.375 8.219 9.889 8.295 5.81 4.00 13.440 1277 1344 1411 1478 1613 1680 1814
9.625 64.90 64.32 0.672 8.281 8.125 9.965 8.201 5.81 4.00 14.620 1389 1462 1535 1608 1754 1828 1974
9.625 70.30 69.76 0.734 8.157 8.001 10.047 8.077 6.50 3.50 16.017 1522 1602 1682 1762 1922 2002 2162
9.625 71.60 71.16 0.750 8.125 7.969 10.060 8.045 6.50 3.50 16.410 1559 1641 1723 1805 1969 2051 2215
9.625 75.60 75.21 0.797 8.031 7.875 10.099 7.951 6.50 3.50 17.558 1668 1756 1844 1931 2107 2195 2370
9.625 80.80 80.50 0.859 7.907 7.751 10.102 7.827 7.38 3.00 18.779 1784 1878 1972 2066 2253 2347 2535
9.625 86.00 85.78 0.922 7.781 7.625 10.098 7.701 7.38 3.00 20.213 1920 2021 2122 2223 2426 2527 2729
9.625 91.00 90.89 0.984 7.657 7.501 10.095 7.577 7.44 3.00 21.093 2004 2109 2215 2320 2531 2637 2848
9.875 62.80 61.80 0.625 8.625 8.500 10.147 8.565 * 5.81 4.00 13.655 1297 1366 1434 1502 1639 1707 1843
10.750 73.20 72.40 0.672 9.406 9.250 11.041 9.326 5.81 4.00 16.264 1545 1626 1708 1789 1952 2033 2196
10.750 75.90 75.20 0.700 9.350 9.194 11.076 9.270 5.81 4.00 17.066 1621 1707 1792 1877 2048 2133 2304
10.750 79.20 78.59 0.734 9.282 9.126 11.131 9.202 5.81 4.00 18.021 1712 1802 1892 1982 2163 2253 2433
10.750 80.80 80.18 0.750 9.250 9.125 11.157 9.170 * 5.81 4.00 18.366 1745 1837 1928 2020 2204 2296 2479
10.750 85.30 84.80 0.797 9.156 9.000 11.139 9.076 7.44 3.00 19.474 1850 1947 2045 2142 2337 2434 2629
10.750 91.20 90.83 0.859 9.032 8.876 11.223 8.952 7.44 3.00 21.184 2012 2118 2224 2330 2542 2648 2860
10.750 97.10 96.87 0.922 8.906 8.750 11.283 8.826 7.44 3.00 22.257 2114 2226 2337 2448 2671 2782 3005
10.750 102.90 102.73 0.984 8.782 8.626 11.280 8.702 7.50 3.00 24.257 2304 2426 2547 2668 2911 3032 3275
10.750 104.30 104.23 1.000 8.750 8.594 11.232 8.670 7.44 3.00 23.140 2198 2314 2430 2545 2777 2893 3124
10.750 108.70 108.60 1.047 8.656 8.500 11.276 8.576 7.44 3.00 25.602 2432 2560 2688 2816 3072 3200 3456
11.750 87.50 86.44 0.734 10.282 10.126 12.097 10.202 6.56 3.50 19.647 1866 1965 2063 2161 2358 2456 2652
11.750 94.00 93.32 0.797 10.156 10.000 12.185 10.076 6.56 3.50 21.580 2050 2158 2266 2374 2590 2698 2913
11.750 100.50 100.01 0.859 10.032 9.876 12.267 9.952 7.44 3.00 23.313 2215 2331 2448 2564 2798 2914 3147
11.750 107.10 106.72 0.922 9.906 9.750 12.320 9.826 7.44 3.00 25.209 2395 2521 2647 2773 3025 3151 3403
11.750 113.50 113.25 0.984 9.782 9.626 12.332 9.702 7.44 3.00 26.713 2538 2671 2805 2938 3206 3339 3606
11.750 119.90 119.79 1.047 9.656 9.500 12.330 9.576 7.44 3.00 28.590 2716 2859 3002 3145 3431 3574 3860
12.750 94.20 94.28 0.734 11.282 11.126 13.091 11.202 6.56 3.50 21.370 2030 2137 2244 2351 2564 2671 2885
12.750 101.70 101.84 0.797 11.156 11.000 13.185 11.076 6.56 3.50 23.510 2233 2351 2469 2586 2821 2939 3174
12.750 109.10 109.19 0.859 11.032 10.876 13.285 10.952 6.56 3.50 25.584 2430 2558 2686 2814 3070 3198 3454
12.750 116.50 116.58 0.922 10.906 10.750 13.311 10.826 7.50 3.00 27.153 2580 2715 2851 2987 3258 3394 3666
12.750 123.70 123.77 0.984 10.782 10.626 13.387 10.702 7.50 3.00 29.182 2772 2918 3064 3210 3502 3648 3940
12.750 130.90 130.99 1.047 10.656 10.500 13.384 10.576 7.50 3.00 29.689 2820 2969 3117 3266 3563 3711 4008
12.750 137.90 138.01 1.109 10.532 10.376 13.379 10.452 7.44 3.00 33.085 3143 3309 3474 3639 3970 4136 4466
13.375 92.50 91.25 0.672 12.031 11.875 13.680 11.951 6.56 3.50 20.267 1925 2027 2128 2229 2432 2533 2736
13.375 100.30 99.19 0.734 11.907 11.751 13.759 11.827 6.56 3.50 22.510 2138 2251 2364 2476 2701 2814 3039
13.375 108.10 107.16 0.797 11.781 11.625 13.756 11.701 7.44 3.00 24.425 2320 2443 2565 2687 2931 3053 3297
13.375 115.70 114.93 0.859 11.657 11.501 13.848 11.577 7.44 3.00 26.622 2529 2662 2795 2928 3195 3328 3594
13.375 123.40 122.74 0.922 11.531 11.375 13.936 11.451 7.50 3.00 28.522 2710 2852 2995 3137 3423 3565 3850
13.375 130.80 130.34 0.984 11.407 11.251 13.991 11.327 7.50 3.00 30.668 2913 3067 3220 3373 3680 3834 4140
13.375 138.30 137.98 1.047 11.281 11.125 14.033 11.201 7.50 3.00 32.662 3103 3266 3430 3593 3919 4083 4409
13.375 145.60 145.42 1.109 11.157 11.001 14.037 11.077 7.50 3.00 33.936 3224 3394 3563 3733 4072 4242 4581
14.000 99.60 99.52 0.700 12.600 12.444 14.306 12.520 6.56 3.50 22.109 2100 2211 2321 2432 2653 2764 2985
14.000 104.20 104.09 0.734 12.532 12.376 14.354 12.452 6.56 3.50 23.397 2223 2340 2457 2574 2808 2925 3159
14.000 112.60 112.49 0.797 12.406 12.250 14.458 12.326 6.56 3.50 25.750 2446 2575 2704 2833 3090 3219 3476
16.000 109.00 107.60 0.656 14.688 14.500 16.706 14.608 7.56 3.00 20.891 1985 2089 2194 2298 2507 2611 2820
16.000 118.00 116.83 0.715 14.570 14.382 16.706 14.490 7.56 3.00 25.312 2405 2531 2658 2784 3037 3164 3417
16.000 128.60 127.06 0.781 14.438 14.250 16.706 14.358 7.56 3.00 28.192 2678 2819 2960 3101 3383 3524 3806
16.000 137.90 136.59 0.843 14.314 14.126 16.706 14.234 7.56 3.00 30.876 2933 3088 3242 3396 3705 3860 4168
16.000 147.30 146.19 0.906 14.188 14.000 16.706 14.108 7.56 3.00 33.579 3190 3358 3526 3694 4029 4197 4533
“Tensile capacity calculated on; L-80 = 95 ksi, N-80/C-90 = 100 ksi, T-95 = 105 ksi, HC-95 = 110 ksi, C-110 = 120 ksi, P-110 = 125 ksi, Q-125 = 135 ksi.”
* For this item bore will pass popular oversize drift.
Interchangeable where bracketed.
Contact any location listed on the back cover of this catalog for detailed product data sheets and brochures. 15
Type 563 Casing Features
Series 500 Type 563 combines the excellent structural charac- to retain engagement during high axial load cycling. Flank
teristics of the dovetail Wedge Thread with the high pressure clearance, which would permit relative movement of pin and
gas sealing reliability of a metal-to-metal seal. This threaded coupling during compression and tension cycling, is eliminated.
and coupled connection is suitable for not only long production
and intermediate casing strings, but also for the structurally The wedge effect, opposing flank engagement, produces a
demanding environments of extended reach, highly deviated, positive torque stop and prevents excessive rotation during
geothermal, and steam injection wells. make-up. The connection can tolerate the high torque loads of
downhole rotation without creating a downhole restriction in
The unique interlocking dovetail profile of the Wedge Thread the pin ends.
creates a reverse angle on both the load flank and the stab
flank. The "hooked" load flank permits the connection to carry The Type 563 connection has a history of use in severe
high tension loads by resisting radial separation of the run-out applications. This includes sour service production casing
threads. The "double hooked" dovetail flanks produce a radial strings in Canada and offshore California, high strength inter-
stress component which supports the coupling in resisting high mediate casing for a relief well in South America, and geother-
compression-induced hoop stress. This thread support for the mal production strings in Mexico.
coupling allows standard OD couplings to be used in high Pins and couplings are phosphate coated for lubricant reten-
compression service. The interlocking dovetail threads also tion. Mill ends are end drifted after buck-on. Prior to installing
provide resistance to the simultaneous tension and compres- full thread form protectors, a water-displacing, corrosion pre-
sion created by bending. ventative compound is applied.
Application of final make-up torque simultaneously preloads
the stab and load flanks. This preload allows the thread flanks
16
Type 563 Performance Data
PIPE CONNECTION TYPE 563 TENSILE CAPACITY
Coupling MINIMUM PARTING LOAD
Pin Make- Critical
Size (O.D.) Wall Stan- Special I.D. Up Section N-80/
& Weight Thick- I.D. dard Clearance Length Threads
Drift (Bored) Loss Area L-80 C-90 T-95 HC-95 P-110 Q-125
(Nominal) ness (Nom.) O.D. O.D. Per
Inch
Sq. In. 1000 1000 1000 1000 1000 1000
In. Lbs./Ft. Inches Inches Inches Inches Inches Inches Inches Inches Lbs. Lbs. Lbs. Lbs. Lbs. Lbs.
5.000 13.00 0.253 4.494 4.369 5.563 5.332 9.00 4.444 3.99 3.36 3.351 318 335 352 369 419 452
5.000 15.00 0.296 4.408 4.283 5.563 5.404 9.00 4.358 3.99 3.36 3.952 375 395 415 435 494 534
5.000 18.00 0.362 4.276 4.151 5.563 9.00 3.99 3.36 4.853 461 485 510 534 607 655
5.000 21.40 0.437 4.126 4.001 5.750 5.511 12.00 4.076 5.36 2.65 5.566 529 557 584 612 696 751
Tubular Products
5.000 23.20 0.478 4.044 3.919 5.750 5.571 12.00 5.36 2.65 6.092 579 609 640 670 762 822
5.000 24.10 0.500 4.000 3.875 5.750 5.603 12.00 5.36 2.65 6.370 605 637 669 701 796 860
5.500 14.00 0.244 5.012 4.887 6.050 5.820 9.00 4.962 3.99 3.36 3.565 339 357 374 392 446 481
5.500 15.50 0.275 4.950 4.825 6.050 5.873 9.00 4.900 3.99 3.36 4.050 385 405 425 446 506 547
5.500 17.00 0.304 4.892 4.767 6.050 5.921 9.00 4.842 3.99 3.36 4.498 427 450 472 495 562 607
5.500 20.00 0.361 4.778 4.653 6.050 9.00 3.99 3.36 5.364 510 536 563 590 671 724
5.500 23.00 0.415 4.670 4.545 6.050 9.00 3.99 3.36 6.165 586 617 647 678 771 832
5.500 26.00 0.476 4.548 4.423 6.125 6.057 9.75 4.498 4.30 3.06 6.742 640 674 708 742 843 910
5.500 26.80 0.500 4.500 4.375 6.125 9.75 4.450 4.30 3.06 7.083 673 708 744 779 885 956
5.500 28.40 0.530 4.440 4.315 6.125 9.75 4.390 4.30 3.06 7.504 713 750 788 825 938 1013
5.500 29.70 0.562 4.376 4.251 6.250 6.085 11.25 4.326 5.06 2.75 7.871 748 787 826 866 984 1063
5.500 32.60 0.625 4.250 4.125 6.250 6.174 11.25 5.06 2.75 8.724 829 872 916 960 1091 1178
6.625 20.00 0.288 6.049 5.924 7.390 7.012 9.25 5.999 4.05 3.29 5.081 483 508 534 559 635 686
6.625 24.00 0.352 5.921 5.796 7.390 7.121 9.25 5.871 4.05 3.29 6.284 597 628 660 691 786 848
6.625 28.00 0.417 5.791 5.666 7.390 7.227 9.25 4.05 3.29 7.480 711 748 785 823 935 1010
6.625 32.00 0.475 5.675 5.550 7.390 9.25 4.05 3.29 8.525 810 853 895 938 1066 1151
7.000 20.00 0.272 6.456 6.331 7.656 7.371 9.25 6.406 4.05 3.29 5.060 481 506 531 557 633 683
7.000 23.00 0.317 6.366 6.250 7.656 7.449 9.25 6.316 * 4.05 3.29 5.966 567 597 626 656 746 805
7.000 26.00 0.362 6.276 6.151 7.656 7.525 9.25 6.226 4.05 3.29 6.860 652 686 720 755 858 926
7.000 29.00 0.408 6.184 6.059 7.656 9.25 4.05 3.29 7.760 737 776 815 854 970 1048
7.000 32.00 0.453 6.094 6.000 7.656 9.25 4.05 3.29 8.628 820 863 906 949 1079 1165
7.000 35.00 0.498 6.004 5.879 7.750 7.557 11.25 5.954 5.06 2.75 9.092 864 909 955 1000 1137 1227
7.000 38.00 0.540 5.920 5.795 7.750 7.623 11.25 5.870 5.06 2.75 9.878 938 988 1037 1087 1235 1334
7.000 41.00 0.590 5.820 5.695 7.750 11.25 5.06 2.75 10.800 1026 1080 1134 1188 1350 1458
7.000 42.70 0.625 5.750 5.625 7.750 11.25 5.06 2.75 11.436 1086 1144 1201 1258 1430 1544
7.625 26.40 0.328 6.969 6.844 8.500 8.097 9.25 6.919 4.05 3.29 6.768 643 677 711 744 846 914
7.625 29.70 0.375 6.875 6.750 8.500 8.177 9.25 4.05 3.29 7.790 740 779 818 857 974 1052
7.625 33.70 0.430 6.765 6.640 8.500 8.268 9.25 4.05 3.29 8.968 852 897 942 986 1121 1211
7.625 39.00 0.500 6.625 6.500 8.500 8.216 11.25 6.575 5.06 2.75 10.014 951 1001 1051 1102 1252 1352
7.625 42.80 0.562 6.501 6.376 8.500 8.315 11.25 5.06 2.75 11.292 1073 1129 1186 1242 1412 1524
7.625 45.30 0.595 6.435 6.375 8.500 8.366 11.25 5.06 2.75 11.963 1136 1196 1256 1316 1495 1615
7.750 46.10 0.595 6.560 6.500 8.500 8.413 11.50 5.19 2.75 12.093 1149 1209 1270 1330 1512 1633
7.750 48.60 0.640 6.470 6.345 8.500 11.50 5.19 2.75 13.014 1236 1301 1366 1432 1627 1757
8.625 32.00 0.352 7.921 7.875 9.625 9.143 9.25 7.938 * 4.05 3.29 8.298 788 830 871 913 1037 1120
8.625 36.00 0.400 7.825 7.700 9.625 9.225 9.25 4.05 3.29 9.485 901 949 996 1043 1186 1280
8.625 40.00 0.450 7.725 7.625 9.625 9.309 9.25 4.05 3.29 10.707 1017 1071 1124 1178 1338 1445
8.625 44.00 0.500 7.625 7.500 9.625 9.226 11.25 7.575 5.06 2.75 11.429 1086 1143 1200 1257 1429 1543
8.625 49.00 0.557 7.511 7.386 9.625 9.319 11.25 5.06 2.75 12.784 1214 1278 1342 1406 1598 1726
8.625 52.00 0.595 7.435 7.310 9.625 9.379 11.25 5.06 2.75 13.676 1299 1368 1436 1504 1710 1846
8.625 54.00 0.625 7.375 7.250 9.625 9.427 11.25 5.06 2.75 14.374 1366 1437 1509 1581 1797 1940
9.625 36.00 0.352 8.921 8.765 10.625 10.147 9.25 8.871 4.05 3.29 9.305 884 931 977 1024 1163 1256
9.625 40.00 0.395 8.835 8.750 10.625 10.222 9.25 4.05 3.29 10.504 998 1050 1103 1155 1313 1418
9.625 43.50 0.435 8.755 8.599 10.625 10.291 9.25 4.05 3.29 11.610 1103 1161 1219 1277 1451 1567
9.625 47.00 0.472 8.681 8.525 10.625 10.353 9.25 4.05 3.29 12.623 1199 1262 1325 1389 1578 1704
9.625 53.50 0.545 8.535 8.500 10.625 10.474 9.25 4.05 3.29 14.597 1387 1460 1533 1606 1825 1971
9.625 58.40 0.595 8.435 8.375 10.625 10.380 11.25 5.06 2.75 15.390 1462 1539 1616 1693 1924 2078
9.625 59.40 0.609 8.407 8.251 10.625 10.403 11.25 5.06 2.75 15.761 1497 1576 1655 1734 1970 2128
9.625 61.10 0.625 8.375 8.219 10.625 11.25 5.06 2.75 16.182 1537 1618 1699 1780 2023 2185
9.875 62.80 0.625 8.625 8.500 10.625 11.25 5.06 2.75 16.634 1580 1663 1747 1830 2079 2246
10.750 40.50 0.350 10.050 9.894 11.750 11.252 10.00 10.000 4.45 2.94 10.375 986 1038 1089 1141 1297 1401
10.750 45.50 0.400 9.950 9.875 11.750 11.340 10.00 4.45 2.94 11.945 1135 1195 1254 1314 1493 1613
10.750 51.00 0.450 9.850 9.694 11.750 11.427 10.00 4.45 2.94 13.501 1283 1350 1418 1485 1688 1823
10.750 55.50 0.495 9.760 9.625 11.750 11.334 11.50 9.710 * 5.22 2.65 14.434 1371 1443 1516 1588 1804 1949
10.750 60.70 0.545 9.660 9.504 11.750 11.420 11.50 5.22 2.65 15.959 1516 1596 1676 1755 1995 2154
10.750 65.70 0.595 9.560 9.500 11.750 11.503 11.50 5.22 2.65 17.469 1660 1747 1834 1922 2184 2358
10.750 73.20 0.672 9.406 9.250 11.750 11.630 11.50 5.22 2.65 19.763 1877 1976 2075 2174 2470 2668
10.750 79.20 0.734 9.282 9.126 11.750 13.00 6.06 2.35 21.432 2036 2143 2250 2357 2679 2893
11.750 47.00 0.375 11.000 10.844 12.750 12.299 10.00 4.45 2.94 12.241 1163 1224 1285 1347 1530 1653
11.750 54.00 0.435 10.880 10.724 12.750 12.406 10.00 4.45 2.94 14.303 1359 1430 1502 1573 1788 1931
11.750 60.00 0.489 10.772 10.625 12.750 12.363 11.50 10.722 * 5.22 2.65 15.645 1486 1565 1643 1721 1956 2112
11.750 65.00 0.534 10.682 10.625 12.750 12.441 11.50 5.22 2.65 17.161 1630 1716 1802 1888 2145 2317
11.750 71.00 0.582 10.586 10.430 12.750 12.523 11.50 5.22 2.65 18.765 1783 1877 1970 2064 2346 2533
11.750 75.00 0.618 10.514 10.358 12.750 12.584 11.50 5.22 2.65 19.958 1896 1996 2096 2195 2495 2694
11.750 79.00 0.656 10.438 10.282 12.750 11.50 5.22 2.65 21.209 2015 2121 2227 2333 2651 2863
11.875 71.80 0.582 10.711 10.625 12.750 11.50 5.22 2.65 18.976 1803 1898 1992 2087 2372 2562
13.375 54.50 0.380 12.615 12.459 14.375 13.923 11.50 12.540 5.17 2.61 14.005 1330 1401 1471 1541 1751 1891
13.375 61.00 0.430 12.515 12.359 14.375 14.013 11.50 12.440 5.17 2.61 15.979 1518 1598 1678 1758 1997 2157
13.375 68.00 0.480 12.415 12.259 14.375 14.102 11.50 5.17 2.61 17.937 1704 1794 1883 1973 2242 2421
13.375 72.00 0.514 12.347 12.250 14.375 14.162 11.50 5.17 2.61 19.259 1830 1926 2022 2118 2407 2600
13.375 77.00 0.550 12.275 12.119 14.375 14.090 13.25 12.200 6.06 2.35 20.088 1908 2009 2109 2210 2511 2712
13.375 80.70 0.580 12.215 12.059 14.375 14.142 13.25 12.140 6.06 2.35 21.242 2018 2124 2230 2337 2655 2868
13.375 85.00 0.608 12.159 12.003 14.375 14.190 13.25 6.06 2.35 22.314 2120 2231 2343 2455 2789 3012
13.375 86.00 0.625 12.125 11.969 14.375 14.219 13.25 6.06 2.35 22.962 2181 2296 2411 2526 2870 3100
13.500 81.40 0.580 12.340 12.250 14.375 11.50 5.17 2.61 20.735 1970 2074 2177 2281 2592 2799
13.625 88.20 0.625 12.375 12.250 14.625 14.470 13.25 6.06 2.35 23.414 2224 2341 2458 2576 2927 3161
14.000 92.68 0.650 12.700 12.544 15.000 14.830 13.25 6.06 2.35 25.092 2384 2509 2635 2760 3137 3387
14.000 99.43 0.700 12.600 12.444 15.000 13.25 6.06 2.35 27.079 2573 2708 2843 2979 3385 3656
14.000 106.13 0.750 12.500 12.344 15.000 13.25 6.06 2.35 29.050 2760 2905 3050 3196 3631 3922
14.000 112.78 0.800 12.400 12.244 15.000 13.25 6.06 2.35 31.006 2946 3101 3256 3411 3876 4186
16.000 75.00 0.438 15.124 14.936 17.000 16.656 11.50 15.049 5.17 2.61 19.608 1863 1961 2059 2157 2451 2647
16.000 84.00 0.495 15.010 14.822 17.000 16.758 11.50 5.17 2.61 22.306 2119 2231 2342 2454 2788 3011
16.000 109.00 0.656 14.688 14.500 17.000 13.25 6.06 2.35 29.142 2768 2914 3060 3206 3643 3934
16.000 118.00 0.715 14.570 14.382 17.000 13.25 6.06 2.35 31.853 3026 3185 3345 3504 3982 4300
18.625 87.50 0.435 17.755 17.567 20.000 19.274 11.50 17.680 5.17 2.61 22.756 2162 2276 2389 2503 2845 3072
18.625 94.50 0.460 17.705 17.517 20.000 19.320 11.50 17.630 5.17 2.61 24.148 2294 2415 2536 2656 3019 3260
18.625 97.70 0.486 17.653 17.465 20.000 19.368 11.50 5.17 2.61 25.593 2431 2559 2687 2815 3199 3455
18.625 109.35 0.563 17.499 17.311 20.000 19.370 13.25 17.424 6.06 2.35 29.058 2761 2906 3051 3196 3632 3923
18.625 112.00 0.579 17.467 17.279 20.000 19.399 13.25 17.392 6.06 2.35 29.937 2844 2994 3143 3293 3742 4041
18.625 136.00 0.693 17.239 17.051 20.000 19.602 13.25 6.06 2.35 36.152 3434 3615 3796 3977 4519 4881
13.500 inch, 81.4 lbs/ft is interchangeable with the 13.375 inch, 54.50 - 72.00 lbs/ft profile. Tensile strength calculated on, L-80 = 95 KSI ultimate, N-80/C-90 = 100 KSI ultimate, T-95 =
105 KSI ultimate, HC-95 = 110 KSI ultimate, P-110 = 125 KSI ultimate, Q-125 = 135 KSI ultimate.
*For this item bore will pass popular oversize drift. ] Interchangeable where bracketed.
Contact any location listed on the back cover of this catalog for detailed product data sheets and brochures. 17
Type 521 Casing Features
The Hydril Series 500 Type 521 casing connection is pull-out, each being all too common with conventional
unequaled in its combination of structural capabilities. tapered casing connections. Type 521’s rugged coarse-
It offers strengths in torque, bending, tension, and pitch threads resist cross-threading. The interlocking
compression, all on a streamlined OD for clearance dovetail threads eliminate jump-out by preventing radial
applications. separation of the threads.
This casing connection excels in structurally demanding On large pipe sizes, Type 521 does not have to sacrifice
applications such as horizontal and extended reach wells. clearance for strength. A string of 16” 84.00 lb/ft Type 521
Its capability for rotation-while-bending is unsurpassed for was run to 9800’ in 17 1/2” hole and cemented back to
non-upset connections. Type 521 has been run into medi- surface.
um and long radius horizontal and extended reach wells
where it has been rotated comfortably during wash-down Type 521 has been run successfully from floaters. It has
and cementing operations. Operators have also been been used extensively for surface and intermediate cas-
successful drilling Type 521 liners into place in particularly ing strings in the Gulf of Mexico. Other examples include
difficult formations. a relief well where 13 3/8” Type 521 was set in 14 3/4”
Type 521 has been selected by many operators for use hole through a deviation of 12°/100 feet. Type 521 was
also used in record water depths in the Gulf of Mexico
on gravel pack screens and slotted liners. Its high
bending and torque strengths combined with a relatively on 15” surface casing set beneath a 16 3/4” stack.
low cost make Type 521 very attractive for sand control
applications. These are some of the applications that demonstrate
the excellent structural and clearance features of the Type
The Type 521 solves two frequent problems encountered 521 connection.
on large diameter casing: cross-threading and thread
18
Type 521 Performance Data
4.000 9.50 9.12 0.226 3.548 3.423 4.103 3.457 3.62 3.36 1.646 123 156 165 181 206
4.000 11.00 10.47 0.262 3.476 3.351 4.162 3.401 3.62 3.36 2.029 152 193 203 223 254
Tubular Products
4.000 11.60 11.35 0.286 3.428 3.303 4.200 3.353 3.62 3.36 2.284 171 217 228 251 286
4.500 10.50 10.24 0.224 4.052 3.927 4.651 3.976 3.62 3.36 1.821 137 173 182 200 228
4.500 11.00 10.80 0.237 4.026 3.901 4.673 3.976 3.62 3.36 1.977 148 188 198 217 247
4.500 11.60 11.36 0.250 4.000 3.875 4.695 3.960 3.62 3.36 2.141 161 203 214 236 268
4.500 12.60 12.25 0.271 3.958 3.833 4.729 3.918 3.62 3.36 2.393 179 227 239 263 299
4.500 13.50 13.05 0.290 3.920 3.795 4.759 3.880 3.62 3.36 2.617 196 249 262 288 327
5.000 13.00 12.84 0.253 4.494 4.369 5.185 4.444 3.62 3.36 2.431 182 231 243 267 304
5.000 15.00 14.88 0.296 4.408 4.283 5.255 4.358 3.62 3.36 3.014 226 286 301 332 377
5.000 18.00 17.95 0.362 4.276 4.151 5.359 4.226 3.62 3.36 3.891 292 370 389 428 486
5.500 14.00 13.71 0.244 5.012 4.887 5.660 4.947 3.62 3.36 2.552 191 242 255 281 319
5.500 15.50 15.36 0.275 4.950 4.825 5.713 4.900 3.62 3.36 3.022 227 287 302 332 378
5.500 17.00 16.89 0.304 4.892 4.767 5.761 4.842 3.62 3.36 3.453 259 328 345 380 432
5.500 20.00 19.83 0.361 4.778 4.653 5.852 4.728 3.62 3.36 4.300 323 409 430 473 538
5.500 23.00 22.56 0.415 4.670 4.545 5.936 4.620 3.62 3.36 5.069 380 482 507 558 634
6.625 20.00 19.51 0.288 6.049 5.924 6.818 5.999 3.70 3.28 3.755 282 357 376 413 469
6.625 24.00 23.60 0.352 5.921 5.796 6.925 5.871 3.70 3.28 4.924 369 468 492 542 616
6.625 28.00 27.67 0.417 5.791 5.666 7.029 5.741 3.70 3.28 6.079 456 578 608 669 760
6.625 32.00 31.23 0.475 5.675 5.550 7.120 5.625 3.70 3.28 7.097 532 674 710 781 887
7.000 20.00 19.56 0.272 6.456 6.331 7.148 6.381 3.70 3.28 3.629 272 345 363 399 454
7.000 23.00 22.65 0.317 6.366 6.250 7.225 6.291* 3.70 3.28 4.507 338 428 451 496 563
7.000 26.00 25.69 0.362 6.276 6.151 7.300 6.201 3.70 3.28 5.373 403 510 537 591 672
7.000 29.00 28.75 0.408 6.184 6.059 7.375 6.109 3.70 3.28 6.248 469 594 625 687 781
7.000 32.00 31.70 0.453 6.094 6.000 7.447 6.050* 3.70 3.28 7.086 531 673 709 779 886
7.625 26.40 25.59 0.328 6.969 6.844 7.868 6.894 3.70 3.28 5.088 382 483 509 560 636
7.625 29.70 29.06 0.375 6.875 6.750 7.947 6.800 3.70 3.28 6.080 456 578 608 669 760
7.625 33.70 33.07 0.430 6.765 6.640 8.037 6.690 3.70 3.28 7.220 542 686 722 794 903
7.625 39.00 38.08 0.500 6.625 6.500 8.148 6.550 3.70 3.28 8.650 649 822 865 952 1081
8.625 32.00 31.13 0.352 7.921 7.875 8.889 7.924* 3.70 3.28 6.234 468 592 623 686 779
8.625 36.00 35.17 0.400 7.825 7.700 8.970 7.750 3.70 3.28 7.384 554 701 738 812 923
8.625 40.00 39.33 0.450 7.725 7.625 9.053 7.674* 3.70 3.28 8.572 643 814 857 943 1072
8.625 44.00 43.43 0.500 7.625 7.500 9.134 7.550 3.70 3.28 9.744 731 926 974 1072 1218
9.625 36.00 34.89 0.352 8.921 8.765 9.883 8.846 3.70 3.28 6.841 513 650 684 753 855
9.625 40.00 38.97 0.395 8.835 8.750 9.957 8.799* 3.70 3.28 8.012 601 761 801 881 1002
9.625 43.50 42.73 0.435 8.755 8.599 10.025 8.680 3.70 3.28 9.083 681 863 908 999 1135
9.625 47.00 46.18 0.472 8.681 8.525 10.087 8.606 3.70 3.28 10.052 754 955 1005 1106 1257
9.625 53.50 52.90 0.545 8.535 8.500 10.206 8.535* 3.70 3.28 11.976 898 1138 1198 1317 1497
10.750 40.50 38.91 0.350 10.050 9.894 10.863 9.975 4.14 2.94 7.231 542 687 723 795 904
10.750 45.50 44.26 0.400 9.950 9.875 10.950 9.926* 4.14 2.94 8.651 649 822 865 952 1081
10.750 51.00 49.55 0.450 9.850 9.694 11.037 9.775 4.14 2.94 10.247 769 973 1025 1127 1281
10.750 55.50 54.26 0.495 9.760 9.625 11.010 9.685* 4.97 2.65 11.463 860 1089 1146 1261 1433
10.750 60.70 59.45 0.545 9.660 9.504 11.094 9.585 4.97 2.65 12.937 970 1229 1294 1423 1617
10.750 65.70 64.59 0.595 9.560 9.500 11.177 9.551* 4.97 2.65 14.370 1078 1365 1437 1581 1796
11.750 47.00 45.60 0.375 11.000 10.844 11.892 10.925 4.14 2.94 8.577 643 815 858 943 1072
11.750 54.00 52.62 0.435 10.880 10.724 11.998 10.805 4.14 2.94 10.586 794 1006 1059 1164 1323
11.750 60.00 58.87 0.489 10.772 10.625 11.928 10.687* 4.97 2.65 12.205 915 1159 1221 1343 1526
11.750 65.00 64.03 0.534 10.682 10.625 11.965 10.676* 4.97 2.65 13.198 990 1254 1320 1452 1650
11.750 71.00 69.48 0.582 10.586 10.430 12.125 10.501 4.97 2.65 15.235 1143 1447 1524 1676 1904
11.750 73.60 72.53 0.609 10.532 10.376 12.170 10.447 4.97 2.65 16.103 1208 1530 1610 1771 2013
11.750 80.50 79.58 0.672 10.406 10.250 12.274 10.321 4.97 2.65 18.097 1357 1719 1810 1991 2262
11.875 71.80 70.26 0.582 10.711 10.625 12.269 10.676* 4.97 2.65 15.353 1151 1459 1535 1689 1919
13.375 54.50 52.79 0.380 12.615 12.459 13.531 12.540 4.65 2.61 9.461 710 899 946 1041 1183
13.375 61.00 59.50 0.430 12.515 12.359 13.620 12.440 4.65 2.61 11.362 852 1079 1136 1250 1420
13.375 68.00 66.17 0.480 12.415 12.259 13.707 12.340 4.65 2.61 13.254 994 1259 1325 1458 1657
13.375 72.00 70.67 0.514 12.347 12.250 13.766 12.317* 4.65 2.61 14.537 1090 1381 1454 1599 1817
13.375 77.00 75.40 0.550 12.275 12.119 13.686 12.200 5.60 2.35 15.587 1169 1481 1559 1715 1948
13.375 80.70 79.33 0.580 12.215 12.059 13.738 12.140 5.60 2.35 16.693 1252 1586 1669 1836 2087
13.375 85.00 82.98 0.608 12.159 12.003 13.785 12.084 5.60 2.35 17.740 1331 1685 1774 1951 2218
13.375 86.00 85.19 0.625 12.125 12.000 13.814 12.050 5.60 2.35 18.361 1377 1744 1836 2020 2295
13.500 81.40 80.11 0.580 12.340 12.250 13.954 12.315* 5.60 2.35 16.793 1259 1595 1679 1847 2099
13.625 88.20 86.86 0.625 12.375 12.250 14.040 12.305* 5.60 2.35 18.708 1403 1777 1871 2058 2339
15.000 77.50 77.50 0.500 14.000 13.812 15.149 13.875 4.65 2.61 15.041 1128 1429 1504 1655 1880
16.000 75.00 72.86 0.438 15.124 14.936 16.155 15.049 4.65 2.61 14.058 1054 1336 1406 1546 1757
16.000 84.00 82.05 0.495 15.010 14.822 16.257 14.935 4.65 2.61 16.644 1248 1581 1664 1831 2081
16.000 95.00 93.38 0.566 14.868 14.750 16.397 14.809* 4.65 2.61 19.876 1491 1888 1988 2186 2485
16.000 96.00 94.81 0.575 14.850 14.750 16.397 14.809* 4.65 2.61 20.296 1522 1928 2030 2233 2537
16.000 109.00 107.60 0.656 14.688 14.500 16.465 14.613 5.60 2.35 23.487 1762 2231 2349 2584 2936
16.000 118.00 116.83 0.715 14.570 14.382 16.566 14.495 5.60 2.35 26.116 1959 2481 2612 2873 3265
16.125 95.60 94.14 0.566 14.993 14.805 16.427 14.864 4.65 2.61 19.645 1473 1866 1965 2161 2456
18.000 105.00 104.76 0.562 16.876 16.688 18.100 16.759 4.65 2.61 19.869 1490 1888 1987 2186 2484
18.625 87.50 84.59 0.435 17.755 17.567 18.854 17.638 4.65 2.61 16.223 1217 1541 1622 1785 2028
18.625 94.50 89.32 0.460 17.705 17.517 18.899 17.588 4.65 2.61 17.580 1319 1670 1758 1934 2198
18.625 97.70 94.24 0.486 17.653 17.500 18.946 17.571* 4.65 2.61 18.969 1423 1802 1897 2087 2371
18.625 109.35 108.71 0.563 17.499 17.311 18.948 17.387 5.60 2.35 22.588 1694 2146 2259 2485 2824
18.625 112.00 111.70 0.579 17.467 17.279 18.976 17.355 5.60 2.35 23.445 1758 2227 2345 2579 2931
Tensile capacity calculated on J-55 = 75 ksi, K-55/L-80 = 95 ksi, N-80 = 100 ksi, HC-95 = 110 ksi, P-110 = 125 ksi.
* For this item, bore will pass popular drift size.
Interchangeable where bracketed.
16 1/8” 95.60 Lbs/Ft is interchangeable with 16” 75.00 Lbs/Ft.
Contact any location listed on the back cover of this catalog for detailed product data sheets and brochures. 19
Type 511 Utility Liner Features
PIN
Drilling and workover rig com- Pipe body OD connection
patible with commonly used facilitates running, circulating, and
procedures and equipment. Nubbin washing over. Boxes, machined
OD permits use of standard NUE directly onto as-received pipe
collar-type elevators. ends, provide clearance for
washover and casing repair
Washover pipe durability is string applications.
Tubular Products
developed with the rugged, coarse
pitch thread and steep taper. The 100% pipe body collapse
coarse pitch resists cross thread- strength is created with the lubri-
ing for reliable make-up. cant seal of the dovetail threads.
The Hydril Series 500 Type 511 utility liner connection provides to retain engagement during high axial load cycling. Flank
a unique combination of rugged structural performance and a clearance, which would permit relative movement of pin and
pipe body OD. An integral connection machined on non-upset box during cyclic bending, is eliminated.
ends, its many uses include drilling liners, horizontal liners,
casing repair, geothermal and steam injection slotted liners, The wedge effect, opposing flank engagement, produces a
tubing salvage, and washover pipe applications. positive torque stop and prevents excessive rotation during
make-up. The connection can tolerate the high torque loads of
The unique interlocking dovetail profile of the Wedge Thread downhole rotation during washover or rotating into the hole
creates a reverse angle on both the load flank and the stab without creating a downhole restriction in the pin ends.
flank. The “hooked” load flank permits the connection to carry
high tension loads by resisting radial separation of the threads. With the coarse pitch threads, the profile not only resists han-
The “double hooked” dovetail flanks produce a radial stress dling and stabbing damage, but makes up readily without
component that supports the box in resisting high compres- cross-threading. The connection’s ability to withstand repetitive
sion-induced hoop stress. These interlocking dovetail threads assembly provides multiple use capability for washover and
provide resistance to the simultaneous tension and compres- tubing salvage applications.
sion created by bending.
The Type 511 utility liner connection adds a new dimension to
Application of final make-up torque simultaneously pre-loads liner applications with its good structural characteristics com-
the stab and load flanks. This pre-load allows the thread flanks bined with a pipe body connection OD.
20
Type 511 Performance Data
Inches Lbs/Ft Lbs/Ft Inches Inches Inches Inches Inches Sq. In. 1000 Lbs 1000 Lbs 1000 Lbs 1000 Lbs 1000 Lbs
2.063 3.25 (1) 3.18 0.156 1.751 1.657 1.686 2.27 4.09 0.564 42 54 56 62 71
Tubular Products
2.063 4.50 (1) 4.42 0.225 1.613 1.519 1.548 2.27 4.09 0.788 75 79 87 99
2.375 4.60 (2) 4.44 0.190 1.995 1.901 1.930 2.27 4.09 0.781 59 74 78 86 98
2.375 5.10(2) 5.03 0.218 1.939 1.845 1.887 2.27 4.09 0.899 67 85 90 99 112
2.875 6.40 6.17 0.217 2.441 2.347 2.377 2.27 4.09 0.996 75 95 100 110 125
3.500 7.70 7.58 0.216 3.068 2.943 2.973 2.74 4.09 1.227 92 117 123 135
3.500 9.20 8.81 0.254 2.992 2.867 2.897 2.74 4.09 1.578 118 150 158 174 197
3.500 10.20 9.92 0.289 2.922 2.797 2.827 2.74 4.09 1.760 132 167 176 194 220
4.000 9.50 9.12 0.226 3.548 3.423 3.454 2.74 4.09 1.657 124 157 166 182
4.000 11.00 10.47 0.262 3.476 3.351 3.382 2.74 4.09 1.902 143 181 190 209 238
4.000 11.60(2) 11.35 0.286 3.428 3.303 3.334 2.74 4.09 2.035 153 193 204 224 254
4.500 10.50 10.24 0.224 4.052 3.927 3.959 2.74 4.09 1.902 143 181
4.500 11.00 10.80 0.237 4.026 3.901 3.934 2.74 4.09 2.058 154 196 206 226 257
4.500 11.60 11.36 0.250 4.000 3.875 3.908 2.74 4.09 2.111 158 201 211 232 264
4.500 12.60 12.25 0.271 3.958 3.833 3.865 2.67 3.45 2.096 157 199 210 231 262
4.500 13.50 13.05 0.290 3.920 3.795 3.827 2.67 3.45 2.326 174 221 233 256 291
4.500 15.10 15.00 0.337 3.826 3.701 3.733 3.04 3.36 2.696 256 270 297 337
5.000 15.00 14.88 0.296 4.408 4.283 4.317 2.67 3.45 2.654 199 252 265 292 332
5.000 18.00 17.95 0.362 4.276 4.151 4.185 3.62 3.36 3.311 315 331 364 414
5.500 15.50 15.36 0.275 4.950 4.825 4.860 2.67 3.45 2.727 205 259 273
5.500 17.00 16.89 0.304 4.892 4.767 4.802 2.67 3.45 3.021 227 287 302 332 378
5.500 20.00 19.83 0.361 4.778 4.653 4.688 3.24 3.45 3.636 345 364 400 455
5.750 18.00 18.14 0.312 5.126 5.001 5.036 2.67 3.45 3.196 240 304 320 352 400
5.750 21.80 21.55 0.375 5.000 4.875 4.910 3.70 3.28 3.885 291 369 389 427 486
5.750 24.20 23.93 0.420 4.910 4.785 4.820 3.70 3.28 4.202 315 399 420 462 525
6.000 20.00 19.66 0.324 5.352 5.227 5.263 3.04 3.36 3.515 264 334 352 387 439
6.000 23.00 22.83 0.380 5.240 5.115 5.151 3.10 3.29 4.026 302 382 403 443 503
6.625 24.00 23.60 0.352 5.921 5.796 5.832 3.62 3.36 4.393 329 417 439 483 549
6.625 28.00 27.67 0.417 5.791 5.666 5.702 3.70 3.28 4.871 463 487 536 609
7.000 23.00 22.65 0.317 6.366 6.250 6.286 * 3.04 3.36 4.045 303 384 405 445 506
7.000 26.00 25.69 0.362 6.276 6.151 6.187 3.70 3.28 4.595 345 437 460 505 574
7.000 29.00 28.75 0.408 6.184 6.059 6.095 3.69 3.29 5.124 384 487 512 564 641
7.625 26.40 25.59 0.328 6.969 6.844 6.881 3.04 3.36 4.633 347 440 463 510
7.625 29.70 29.06 0.375 6.875 6.750 6.787 3.70 3.28 5.218 391 496 522 574 652
7.625 33.70 33.07 0.430 6.765 6.640 6.677 4.14 2.94 5.841 555 584 643 730
8.000 31.00 30.57 0.375 7.250 7.125 7.168 3.70 3.28 5.525 414 525 553 608 691
8.125 32.50 31.07 0.375 7.375 7.250 7.293 3.70 3.28 5.581 419 530 558 614 698
8.125 35.50 34.59 0.420 7.285 7.160 7.203 3.69 3.29 6.199 465 589 620 682 775
8.125 39.50 38.46 0.470 7.185 7.060 7.103 4.14 2.94 6.741 506 640 674 742 843
8.625 32.00 31.13 0.352 7.921 7.875 7.918 * 3.24 3.45 5.242 393 498 524
8.625 36.00 35.17 0.400 7.825 7.700 7.743 3.69 3.29 6.348 476 603 635 698 794
8.625 40.00 39.33 0.450 7.725 7.625 7.668 * 4.14 2.94 6.777 644 678 745 847
9.000 40.00 38.96 0.425 8.150 8.025 8.069 3.69 3.29 7.120 534 676 712 783 890
9.625 40.00 38.97 0.395 8.835 8.750 8.794 * 3.70 3.28 6.824 512 648 682 751 853
9.625 43.50 42.73 0.435 8.755 8.625 8.669 * 3.69 3.29 7.849 589 746 785 863 981
9.625 47.00 46.18 0.472 8.681 8.525 8.569 4.14 2.94 8.306 789 831 914 1038
10.750 45.50 44.26 0.400 9.950 9.875 9.922 * 3.70 3.28 7.671 575 729 767 844 959
10.750 51.00 49.55 0.450 9.850 9.694 9.741 4.14 2.94 9.159 687 870 916 1007 1145
10.750 55.50 54.26 0.495 9.760 9.625 9.672 * 4.14 2.94 9.629 915 963 1059 1204
10.750 60.70 59.45 0.545 9.660 9.504 9.551 4.97 2.65 11.258 1070 1126 1238 1407
10.750 65.70 64.59 0.595 9.560 9.500 9.547 * 4.97 2.65 11.318 1075 1132 1245 1415
11.750 60.00 58.87 0.489 10.772 10.625 10.674 * 4.65 2.61 10.499 997 1050 1155 1312
11.750 65.00 64.03 0.534 10.682 10.625 10.674 * 4.65 2.61 10.499 997 1050 1155 1312
*
Tensile strength calculated on, J-55 = 75 ksi, K-55/L-80 = 95 ksi, N-80 = 100 ksi, HC-95 = 110 ksi, P-110 = 125 ksi ultimate.
* For this item bore will pass popular oversize drift.
Interchangeable where bracketed.
(1) This weight has a box OD 0.063” larger than nominal pipe OD.
(2) This weight has a box OD 0.031” larger than nominal pipe OD.
Contact any location listed on the back cover of this catalog for detailed product data sheets and brochures. 21
Tubing Connections
PIN PIN PIN
Tubular Products
22
PIN PIN PIN
Tubular Products
PIN BOX PIN
Special applications include high Special applications include diamond Special applications include CO2
alloy tubing strings and geothermal coring strings and geothermal and injection strings.
tubing. steam injection applications.
Contact any location listed on the back cover of this catalog for detailed product data sheets and brochures. 23
CS¨, PH-6, And PH-4 Features
Over the past 40 years, these integral connections have earned strings, and subsea and J-lay flowlines. Experience with
a worldwide reputation as the measure for performance unconventional applications has provided Hydril with a
for workstring and production tubing applications. Hydril unique understanding of the capabilities of the CS, PH-6, and
supplements this performance with technical and commercial PH-4 connections.
assistance to support your production operations.
Hydril provides facilities worldwide for threading tubing,
Hydril pioneered procedures and concepts used for product casing, and the full range of accessories. All Hydril Plants,
qualification testing. By 1951, Hydril had conducted tests on the strategically located Hydril Service Centers, and Hydril autho-
CS connection that included load to failure tests, torque limit rized, independently owned repair facilities follow the same
tests, and pressure tests on isolated seals. In 1953, Hydril documented standards and procedures for product quality.
conducted thermal cycling tests on the PH-6 connection. Hydril Computer programs for threading are transmitted electronically
continues to employ testing to define connection performance from the central bank to the individual plants. All gauges and
limits. Feedback from field operations and data gained from threading inserts are inspected and controlled by Hydril’s Tool
numerous product tests is used to develop and implement and Gauge operation. This uniformity of manufacture ensures
improvements to the product line. Hydril’s development work interchangeability of Hydril connections worldwide.
today will produce tomorrow’s patented advances to continue
this product evolution. In addition to worldwide threading capability, Hydril has a
network of distributors, manufacturer’s representatives, and
Hydril’s sales organization provides extensive applications agents to complement Hydril’s extensive sales and field service
support for your well planning options. Technical assistance is offers on-site assistance during inspection, handling, and
available for not only connection performance, application running operations. The field service corps of highly trained and
recommendations, and running and handling procedures but dedicated professionals are experienced in field operations and
also for areas of emerging technologies such as horizontal equipped with the service tools needed for a successful job.
drilling, production risers, steam injection and geothermal
24
CS¨, PH-6, and PH-4 Performance Data
3/4(1.050 OD) 1.20 CS 0.113 0.824 0.672 1.327 1.300 0.687 2.22 8 18 27 30 32 37
Tubular Products
3/4(1.050 OD) 1.50 CS 0.154 0.742 0.648 1.327 0.687 2.22 8 24 35 39 41 48
1 (1.315 OD) 1.80 CS 0.133 1.049 0.955 1.552 1.525 0.970 2.22 8 27 40 44 47 54
1 (1.315 OD) 2.25 CS 0.179 0.957 0.848 1.600 0.864 2.22 8 35 51 57 61 70
1 1/4(1.660 OD) 2.40 CS 0.140 1.380 1.286 1.883 1.858 1.312 2.22 8 37 53 60 64 74
1 1/4(1.660 OD) 3.02 CS 0.191 1.278 1.184 1.927 1.218 2.22 8 48 71 79 84 97
1 1/4(1.660 OD) 3.24 CS 0.198 1.264 1.170 1.927 1.200 2.22 8 50 73 82 86 100
1 1/2(1.900 OD) 2.90 CS 0.145 1.610 1.516 2.113 2.094 1.530 2.22 8 44 64 72 76 88
1 1/2(1.900 OD) 3.64 CS 0.200 1.500 1.406 2.162 1.440 2.22 8 59 85 96 101 117
1 1/2(1.900 OD) 4.19 CS 0.219 1.462 1.368 2.179 1.390 2.22 8 64 93 104 110 127
2.063 3.25 CS 0.156 1.751 1.657 2.330 2.295 1.700 2.23 8 51 75 84 89 103
2.063 4.50 CS 0.225 1.613 1.519 2.460 2.407 1.550 2.23 8 71 104 117 123 143
2.375 4.70 CS 0.190 1.995 1.901 2.700 2.655 1.945 2.31 8 72 104 117 124 143
2.375 5.30 CS 0.218 1.939 1.845 2.750 2.700 1.890 2.31 8 81 118 133 140 162
2.375 5.95 PH-6 0.254 1.867 1.773 2.906 2.782 1.805 3.05 6 93 135 152 161 186
2.375 6.20 PH-6 0.261 1.853 1.759 2.938 2.794 1.795 3.05 6 95 139 156 165 191
2.375 6.60 PH-6 0.295 1.785 1.691 3.032 2.854 1.725 3.05 6 106 154 173 183 212
2.375 7.70 PH-6 0.336 1.703 1.609 3.125 2.924 1.645 3.05 6 118 172 194 204 237
2.875 6.50 CS 0.217 2.441 2.347 3.210 3.166 2.371 2.39 8 100 145 163 172 199
2.875 7.90 PH-6 0.276 2.323 2.229 3.438 3.312 2.265 3.04 6 124 180 203 214 248
2.875 8.70 PH-6 0.308 2.259 2.165 3.500 3.365 2.200 3.04 6 137 199 224 236 273
2.875 9.50 PH-6 0.340 2.195 2.101 3.625 3.419 2.130 3.03 6 149 217 244 257 298
2.875 10.70 PH-6 0.392 2.091 1.997 3.688 3.509 2.030 3.02 6 168 245 275 290 336
2.875 11.00 PH-4 0.405 2.065 1.971 3.750 2.000 4.23 4 173 251 283 299 346
2.875 11.65 PH-4 0.440 1.995 1.901 3.750 1.945 4.23 4 185 269 303 320 370
3.500 9.30 CS 0.254 2.992 2.867 3.915 3.859 2.920 2.84 8 142 207 233 246 285
3.500 10.30 CS 0.289 2.922 2.797 3.915 2.870 2.84 8 160 233 262 277 321
3.500 12.95 PH-6 0.375 2.750 2.625 4.313 4.189 2.687 3.35 6 202 295 331 350 405
3.500 14.30 PH-6 0.430 2.640 2.515 4.410 4.287 2.550 3.35 6 228 332 373 394 456
3.500 15.80 PH-6 0.476 2.548 2.423 4.500 4.367 2.485 3.34 6 249 362 407 430 497
3.500 16.70 PH-4 0.510 2.480 2.355 4.500 2.406 4.24 4 263 383 431 455 527
3.500 17.05 PH-4 0.530 2.440 2.315 4.563 2.375 4.24 4 272 396 445 470 544
4.000 11.00 CS 0.262 3.476 3.351 4.417 4.359 3.395 2.84 8 169 246 277 292 338
4.000 13.40 PH-6 0.330 3.340 3.215 4.625 4.514 3.275 3.32 6 209 304 342 361 419
4.000 16.10 PH-6 0.415 3.170 3.045 4.765 4.655 3.080 3.31 6 257 374 421 444 514
4.000 19.00 PH-4 0.500 3.000 2.875 5.000 2.920 4.76 4 302 440 495 522 605
4.000 21.10 PH-4 0.562 2.876 2.751 5.090 2.795 4.76 4 334 486 546 577 668
4.000 22.50 PH-4 0.610 2.780 2.655 5.188 2.700 4.76 4 357 520 585 617 715
4.500 12.75 CS 0.271 3.958 3.833 4.920 4.861 3.865 2.89 8 198 288 324 342 396
4.500 13.50 CS 0.290 3.920 3.795 4.955 4.890 3.840 2.89 8 211 307 345 364 422
4.500 15.50 PH-6 0.337 3.826 3.701 5.125 5.021 3.765 3.34 6 242 353 397 419 485
4.500 17.00 PH-6 0.380 3.740 3.615 5.210 5.091 3.650 3.34 6 271 393 443 467 541
4.500 19.20 PH-6 0.430 3.640 3.515 5.313 5.170 3.560 3.34 6 302 440 495 522 605
4.500 21.60 PH-4 0.500 3.500 3.375 5.500 3.420 4.76 4 346 503 565 597 691
4.500 24.00 PH-4 0.560 3.380 3.255 5.563 3.300 4.76 4 381 555 624 659 762
4.500 26.50 PH-4 0.630 3.240 3.115 5.688 3.160 4.76 4 421 613 689 728 859
5.000 18.00 CS 0.362 4.276 4.151 5.515 4.196 5.27 4 290 422 475 501 580
5.000 20.30 CS 0.408 4.184 4.059 5.585 4.104 5.27 4 324 471 530 559 647
5.000 21.40 CS 0.437 4.126 4.001 5.630 4.046 5.27 4 345 501 564 595 689
5.000 23.20 CS 0.478 4.044 3.919 5.700 3.964 5.27 4 373 543 611 645 747
5.000 24.10 CS 0.500 4.000 3.875 5.735 3.920 5.27 4 389 565 636 672 778
5.000 27.00 CS 0.560 3.880 3.755 5.835 3.800 5.27 4 430 625 703 742 843
5.500 17.00 CS 0.304 4.892 4.767 5.920 4.812 5.27 4 273 397 447 471 546
5.500 20.00 CS 0.361 4.778 4.653 6.005 4.698 5.27 4 321 466 525 554 641
5.500 23.00 CS 0.415 4.670 4.545 6.090 4.590 5.27 4 365 530 597 630 729
5.500 26.00 CS 0.476 4.548 4.423 6.185 4.468 5.27 4 413 601 676 714 826
5.500 26.80 CS 0.500 4.500 4.375 6.225 4.420 5.27 4 432 628 707 746 864
5.500 28.40 CS 0.530 4.440 4.315 6.275 4.360 5.27 4 455 662 745 786 910
6.625 28.00 CS 0.417 5.791 5.666 7.210 5.710 5.26 4 447 651 732 773 895
6.625 32.00 CS 0.475 5.675 5.550 7.300 5.595 5.26 4 505 734 826 872 1010
6.625 33.00 CS 0.500 5.625 5.500 7.340 5.545 5.26 4 529 770 866 914 1058
6.625 34.50 CS 0.525 5.575 5.450 7.380 5.495 5.26 4 553 805 905 956 1107
7.000 29.00 CS 0.408 6.184 6.059 7.570 6.104 5.28 4 465 676 760 803 929
7.000 32.00 CS 0.453 6.094 5.969 7.640 6.014 5.28 4 512 745 839 885 1025
7.000 35.00 CS 0.498 6.004 5.879 7.710 5.924 5.28 4 559 814 916 966 1119
7.000 38.00 CS 0.540 5.920 5.795 7.775 5.840 5.28 4 603 877 986 1041 1206
7.000 41.00 CS 0.590 5.820 5.695 7.855 5.740 5.28 4 653 950 1069 1129 1307
All CS and CS-CB connections of any given size are interchangeable.
All PH-6 and PH-6-CB connections of any given size are interchangeable.
All PH-4 and PH-4-CB connections of any given size are interchangeable.
Interchangeable where bracketed.
Contact any location listed on the back cover of this catalog for detailed product data sheets and brochures. 25
Type 533 Tubing Features
PIN
Exceptional torque strength is 100% pipe body ratings for ten-
developed through the simultane- sion and bending are provided by
ous engagement of opposing machining pin and box on a hot
flanks of the dovetail thread. The forged internal-external upset.
thread flanks provide Connection critical areas exceed
a positive torque stop which the pipe body area.
virtually eliminates pin end ID
Tubular Products
restrictions caused by over-
torque. Stress distribution and low
stress levels make the Type 533
Workstring durability is developed suitable for sour service. Type 533
with the rugged, coarse pitch thread is also recommended for use on
and steep taper for deep stabbing. 9% and 13% chromium steels.
The Hydril Series 500 Type 533 Tubing connection is an the stab and load flanks. This preload allows the thread flanks
integral connection machined on hot forged internal-external to retain engagement during high axial load cycling. Flank
upset ends for use in the most demanding applications. It clearance, which would permit relative movement of pin and
combines the excellent structural characteristics of the coupling during compression and tension cycling, is eliminated.
dovetail Wedge Thread machined on upset ends with the
high pressure gas sealing reliability of a metal-to-metal seal. The wedge effect, opposing flank engagement, produces a
Series 500 tubing connections have been used for both positive torque stop and prevents excessive rotation during
production tubing applications and for work string service. makeup. The connection can tolerate the high torque loads of
downhole rotation during workovers without creating a down-
The unique interlocking dovetail profile of the Wedge Thread hole restriction in the pin ends.
creates a reverse angle on both the load flank and the stab
flank. The “hooked” load flank permits the connection to carry With less than 31/2 threads per inch, the profile not only
high tension loads by resisting radial separation of the resists handling and stabbing damage, but makes up readily
threads. The “double hooked” dovetail flanks produce a radial without cross-threading. The connection’s ability to withstand
stress component that supports the box in resisting high repetitive assembly provides multiple trip capability. It has
compression-induced hoop stress. These interlocking dovetail been routinely used for workover operations such as
threads provide resistance to the simultaneous tension and drilling-out cement, milling, fishing, and drill stem testing.
compression created by bending.
For plastic coated strings, the Type 533 is available with the
Application of final make-up torque simultaneously preloads optional CB feature.
26
Type 533 Performance Data
2.375 4.70 0.190 1.995 1.901 2.657 2.657 1.945 3.64 3.45 72 104 117 124 143
2.375 5.30 0.218 1.939 1.845 2.685 2.679 1.889 3.64 3.45 118 133 140 162
Tubular Products
2.375 5.95 0.254 1.867 1.773 2.737 2.690 1.817 3.64 3.45 135 152 161 186
2.375 6.60 0.295 1.785 1.691 2.793 2.718 1.735 3.64 3.45 154 173 183 212
2.375 7.45 0.336 1.703 1.609 2.845 2.744 1.653 3.64 3.45 172 194 204 237
2.875 6.50 0.217 2.441 2.347 3.192 3.179 2.391 3.64 3.45 100 145 163 172 199
2.875 7.90 0.276 2.323 2.229 3.282 3.213 2.273 3.64 3.45 180 203 214 248
2.875 8.70 0.308 2.259 2.165 3.328 3.236 2.209 3.64 3.45 199 224 236 273
2.875 9.50 0.340 2.195 2.101 3.337 3.231 2.145 4.09 3.28 217 244 257 298
2.875 10.70 0.392 2.091 1.997 3.405 3.265 2.041 4.09 3.28 245 275 290 336
2.875 11.65 0.440 1.995 1.901 3.464 3.295 1.945 4.09 3.28 269 303 320 370
3.500 9.30 0.254 2.992 2.867 3.886 3.827 2.942 3.64 3.45 142 207 233 246 285
3.500 10.30 0.289 2.922 2.797 3.941 3.854 2.872 3.64 3.45 233 262 277 321
3.500 12.95 0.375 2.750 2.625 4.067 3.917 2.700 3.64 3.45 295 331 350 405
3.500 14.30 0.430 2.640 2.515 4.100 3.943 2.590 4.49 2.94 332 373 394 456
3.500 15.80 0.476 2.548 2.423 4.160 3.973 2.498 4.49 2.94 362 407 430 497
3.500 16.70 0.510 2.480 2.355 4.202 3.994 2.430 4.49 2.94 383 431 455 527
3.500 17.05 0.530 2.440 2.315 4.226 4.006 2.390 4.49 2.94 396 445 470 544
4.000 11.00 0.262 3.476 3.351 4.406 4.336 3.426 3.64 3.45 169 246 277 292 338
4.000 11.60 0.286 3.428 3.303 4.444 4.355 3.378 3.64 3.45 184 267 300 317 367
4.000 13.40 0.330 3.340 3.215 4.513 4.390 3.290 3.64 3.45 304 342 361 419
4.000 14.80 0.380 3.240 3.115 4.549 4.397 3.190 4.09 3.28 346 389 411 475
4.000 16.10 0.415 3.170 3.045 4.599 4.422 3.120 4.09 3.28 374 421 444 514
4.000 19.00 0.500 3.000 2.875 4.598 4.459 2.950 5.28 2.65 440 495 522 605
4.000 21.10 0.562 2.876 2.751 4.679 4.499 2.826 5.28 2.65 486 546 577 668
4.000 22.50 0.610 2.780 2.655 4.739 4.529 2.730 5.28 2.65 520 585 617 715
4.500 12.75 0.271 3.958 3.833 4.926 4.846 3.908 3.64 3.45 198 288 324 342 396
4.500 13.50 0.290 3.920 3.795 4.958 4.862 3.870 3.64 3.45 307 345 364 422
4.500 15.50 0.337 3.826 3.701 4.992 4.868 3.776 4.09 3.28 353 397 419 485
4.500 17.00 0.380 3.740 3.615 5.058 4.901 3.690 4.09 3.28 393 443 467 541
4.500 19.20 0.430 3.640 3.515 5.133 4.938 3.590 4.09 3.28 440 495 522 605
4.500 21.60 0.500 3.500 3.375 5.114 4.966 3.450 5.28 2.65 503 565 597 691
4.500 24.00 0.560 3.380 3.255 5.196 5.007 3.330 5.28 2.65 555 624 659 762
4.500 26.50 0.630 3.240 3.115 5.288 5.053 3.190 5.28 2.65 613 689 728 843
5.000 15.00 0.296 4.408 4.283 5.430 5.279 4.358 3.99 3.36 241 350 394 416 481
5.000 18.00 0.362 4.276 4.151 5.535 5.279 4.226 3.99 3.36 422 475 501 580
5.500 15.50 0.275 4.950 4.825 5.899 5.779 4.900 3.99 3.36 248
5.500 17.00 0.304 4.892 4.767 5.948 5.779 4.842 3.99 3.36 273 397 447 471 546
5.500 20.00 0.361 4.778 4.653 6.040 5.779 4.728 3.99 3.36 466 525 554 641
5.500 23.00 0.415 4.670 4.545 6.124 5.779 4.620 3.99 3.36 530 597 630 729
5.500 26.00 0.476 4.548 4.423 6.084 5.798 4.483 4.30 3.06 601 676 714 826
5.500 26.80 0.500 4.500 4.375 6.119 5.798 4.435 4.30 3.06 628 707 746 864
5.500 28.40 0.530 4.440 4.315 6.163 5.798 4.374 4.30 3.06 662 745 786 910
6.625 24.00 0.352 5.921 5.796 7.147 6.932 5.871 4.05 3.29 382 555 624 659 763
6.625 28.00 0.417 5.791 5.666 7.254 6.932 5.741 4.05 3.29 651 732 773 895
6.625 32.00 0.475 5.675 5.550 7.345 6.932 5.625 4.05 3.29 734 826 872 1010
7.000 23.00 0.317 6.366 6.250 7.476 7.318 6.316 4.05 3.29 366 532 599 632
7.000 26.00 0.362 6.276 6.151 7.552 7.318 6.226 4.05 3.29 415 604 679 717 830
7.000 29.00 0.408 6.184 6.059 7.628 7.318 6.134 4.05 3.29 676 760 803 929
7.000 32.00 0.453 6.094 6.000 7.700 7.318 6.050 4.05 3.29 745 839 885 1025
7.000 35.00 0.498 6.004 5.879 7.584 7.320 5.944 5.06 2.75 814 916 966 1119
7.000 38.00 0.540 5.920 5.795 7.649 7.320 5.860 5.06 2.75 877 986 1041 1206
7.625 26.40 0.326 6.969 6.844 8.123 7.941 6.919 4.05 3.29 411 598 673 710 822
7.625 29.70 0.375 6.875 6.750 8.203 7.941 6.825 4.05 3.29 683 769 811 940
7.625 33.70 0.430 6.765 6.640 8.294 7.941 6.715 4.05 3.29 778 875 923 1069
7.625 39.00 0.500 6.625 6.500 8.243 7.971 6.575 5.06 2.75 895 1007 1063 1231
Interchangeable where bracketed.
Type 533 is interchangeable with Type 563 and Type 503 in a given size and weight.
Contact any location listed on the back cover of this catalog for detailed product data sheets and brochures. 27
Type 563 Tubing Features
PIN
Exceptional torque strength is High tension and bending
developed through the strengths are developed using a
simultaneous engagement of run-out, dovetail thread machined
opposing flanks of the dovetail on non-upset pipe. The dovetail
thread. The thread flanks thread with its double reverse
provide a positive torque stop flanks resists the tendency for radi-
which virtually eliminates al disengagement of the partial
Tubular Products
pin end ID restrictions caused depth threads.
by over-torque.
Stress distribution and low stress
levels make the Type 563 suitable
100% rated compression
for sour service. Type 563 is also
strength is provided by the
recommended for use on corrosion
dovetail threads.
resistant alloys.
The Hydril Series 500 Type 563 Tubing connection combines stab and load flanks. This preload allows the thread flanks to
the excellent structural characteristics of the dovetail Wedge retain engagement during high axial load cycling. Flank clear-
Thread with the high pressure gas sealing reliability of a metal ance, which would permit relative movement of pin and cou-
seal. This threaded and coupled connection has been used pling during compression and tension cycling, is eliminated.
for both production tubing applications and for work string
service. The Type 563 Tubing connection has been used on The wedge effect, opposing flank engagement, produces a
carbon steel in sour environments as well as on high alloy and positive torque stop and prevents excessive rotation during
stainless steels. makeup. The connection can tolerate the high torque loads
of downhole rotation during workovers without creating a
The unique interlocking dovetail profile of the Wedge Thread downhole restriction in the pin ends.
creates a reverse angle on both the load flank and the stab
flank. The "hooked" load flank permits the connection to carry With less than 3-1/2 threads per inch, the profile not only
high tension loads by resisting radial separation of the shallow resists handling and stabbing damage, but makes up readily
depth run-out threads. The "double hooked" dovetail flanks without cross-threading. The connection's ability to withstand
produce a radial stress component which supports the repetitive assembly provides multiple trip capability. It has been
coupling in resisting high compression-induced hoop stress. routinely used for workover operations such as
These interlocking dovetail threads provide resistance to the drilling-out cement, milling, fishing, and drill stem testing.
simultaneous tension and compression created by bending.
For plastic coated strings, the Type 563 is available with the
Application of final makeup torque simultaneously preloads the optional CB feature.
28
Type 563 Performance Data
Tubular Products
2.375 5.10 0.218 1.939 1.845 2.875 2.685 8.25 1.889 3.64 3.45 1.323 118 133 140 162
2.375 5.80 0.254 1.867 1.773 2.875 2.737 8.25 1.817 3.64 3.45 1.538 135 152 161 186
2.375 6.60 0.295 1.785 1.691 2.875 2.793 8.25 3.64 3.45 1.773 154 173 183 212
2.375 7.35 0.336 1.703 1.609 2.875 8.25 3.64 3.45 1.998 172 194 204 237
2.875 6.40 0.217 2.441 2.347 3.500 3.192 8.25 2.391 3.64 3.45 1.625 100 145 163 172 199
2.875 7.80 0.276 2.323 2.229 3.500 3.282 8.25 2.273 3.64 3.45 2.067 180 203 214 248
2.875 8.60 0.308 2.259 2.165 3.500 3.328 8.25 3.64 3.45 2.297 199 224 236 273
2.875 9.35 0.340 2.195 2.101 3.500 3.337 9.25 4.09 3.28 2.521 217 244 257 298
2.875 10.50 0.392 2.091 1.997 3.500 3.405 9.25 4.09 3.28 2.871 245 275 290 336
2.875 11.50 0.440 1.995 1.901 3.500 3.464 9.25 4.09 3.28 3.179 269 303 320 370
3.500 9.20 0.254 2.992 2.867 4.250 3.886 8.25 2.942 3.64 3.45 2.362 142 207 233 246 285
3.500 10.20 0.289 2.922 2.797 4.250 3.941 8.25 2.872 3.64 3.45 2.687 233 262 277 321
3.500 12.70 0.375 2.750 2.625 4.250 4.067 8.25 3.64 3.45 3.454 295 331 350 405
3.500 14.30 0.430 2.640 2.515 4.250 4.100 10.00 4.49 2.94 3.878 332 373 394 456
3.500 15.50 0.476 2.548 2.423 4.250 4.160 10.00 4.49 2.94 4.253 362 407 430 497
3.500 16.70 0.510 2.480 2.355 4.250 4.202 10.00 4.49 2.94 4.521 383 431 455 527
3.500 17.00 0.530 2.440 2.315 4.250 10.00 4.49 2.94 4.676 396 445 470 544
4.000 11.00 0.262 3.476 3.351 4.750 4.406 8.25 3.426 3.64 3.45 2.816 169 246 277 292 338
4.000 11.60 0.286 3.428 3.303 4.750 4.444 8.25 3.378 3.64 3.45 3.076 184 267 300 317 367
4.000 13.20 0.330 3.340 3.215 4.750 4.513 8.25 3.64 3.45 3.544 304 342 361 419
4.000 14.80 0.380 3.240 3.115 4.750 4.549 9.25 4.09 3.28 4.061 346 389 411 475
4.000 16.10 0.415 3.170 3.045 4.750 4.599 9.25 4.09 3.28 4.413 374 421 444 514
4.000 18.90 0.500 3.000 2.875 4.750 4.598 11.50 5.28 2.65 5.064 440 495 522 605
4.000 21.10 0.562 2.876 2.751 4.750 4.679 11.50 5.28 2.65 5.636 486 546 577 668
4.000 22.20 0.610 2.780 2.655 4.750 11.50 5.28 2.65 6.062 520 585 617 715
4.500 11.60 0.250 4.000 3.875 5.200 4.891 8.25 3.950 3.64 3.45 3.044 184 267 300 317 367
4.500 12.60 0.271 3.958 3.833 5.200 4.926 8.25 3.908 3.64 3.45 3.307 198 288 324 342 396
4.500 13.50 0.290 3.920 3.795 5.200 4.958 8.25 3.870 3.64 3.45 3.542 307 345 364 422
4.500 15.20 0.337 3.826 3.701 5.200 4.992 9.25 4.09 3.28 4.114 353 397 419 485
4.500 17.00 0.380 3.740 3.615 5.200 5.058 9.25 4.09 3.28 4.625 393 443 467 541
4.500 18.90 0.430 3.640 3.515 5.200 5.133 9.25 4.09 3.28 5.205 440 495 522 605
4.500 21.50 0.500 3.500 3.375 5.200 5.114 11.50 5.28 2.65 5.794 503 565 597 691
4.500 23.70 0.560 3.380 3.255 5.200 11.50 5.28 2.65 6.443 555 624 659 762
4.500 26.10 0.630 3.240 3.115 5.300 11.50 5.28 2.65 7.171 613 689 728 843
5.000 15.00 0.296 4.408 4.283 5.563 5.404 9.00 4.358 3.99 3.36 3.952 241 350 394 416 481
5.000 18.00 0.362 4.276 4.151 5.563 9.00 3.99 3.36 4.853 422 475 501 580
5.000 21.40 0.437 4.126 4.001 5.750 5.511 12.00 4.076 5.36 2.65 5.566 501 564 595 689
5.000 23.20 0.478 4.044 3.919 5.750 5.571 12.00 5.36 2.65 6.092 543 611 645 747
5.000 24.10 0.500 4.000 3.875 5.750 5.603 12.00 5.36 2.65 6.370 565 636 672 778
5.500 15.50 0.275 4.950 4.825 6.050 5.873 9.00 4.900 3.99 3.36 4.050 248
5.500 17.00 0.304 4.892 4.767 6.050 5.921 9.00 4.842 3.99 3.36 4.498 273 397 447 471 546
5.500 20.00 0.361 4.778 4.653 6.050 9.00 3.99 3.36 5.364 466 525 554 641
5.500 23.00 0.415 4.670 4.545 6.050 9.00 3.99 3.36 6.165 530 597 630 729
5.500 26.00 0.476 4.548 4.423 6.125 6.057 9.75 4.483 4.30 3.06 6.742 601 676 714 826
5.500 26.80 0.500 4.500 4.375 6.125 9.75 4.435 4.30 3.06 7.083 628 707 746 864
5.500 28.40 0.530 4.440 4.315 6.125 9.75 4.374 4.30 3.06 7.504 662 745 786 910
5.500 29.70 0.562 4.376 4.251 6.250 6.085 11.25 4.326 5.06 2.75 7.871 697 785 828 959
5.500 32.60 0.625 4.250 4.125 6.250 6.174 11.25 5.06 2.75 8.724 766 861 909 1053
6.625 24.00 0.352 5.921 5.796 7.390 7.121 9.25 5.871 4.05 3.29 6.284 382 555 624 659 763
6.625 28.00 0.417 5.791 5.666 7.390 7.227 9.25 4.05 3.29 7.480 651 732 773 895
6.625 32.00 0.475 5.675 5.550 7.390 9.25 4.05 3.29 8.525 734 826 872 1010
7.000 23.00 0.317 6.366 6.250 7.656 7.449 9.25 6.316 4.05 3.29 5.966 366 532 599 632
7.000 26.00 0.362 6.276 6.151 7.656 7.525 9.25 6.226 4.05 3.29 6.860 415 604 679 717 830
7.000 29.00 0.408 6.184 6.059 7.656 9.25 4.05 3.29 7.760 676 760 803 929
7.000 32.00 0.453 6.094 6.000 7.656 9.25 4.05 3.29 8.628 745 839 885 1025
7.000 35.00 0.498 6.004 5.879 7.750 7.557 11.25 5.954 5.06 2.75 9.092 814 916 966 1119
7.000 38.00 0.540 5.920 5.795 7.750 7.623 11.25 5.870 5.06 2.75 9.878 877 986 1041 1206
7.000 41.00 0.590 5.820 5.695 7.750 11.25 5.06 2.75 10.800 950 1069 1129 1307
7.000 42.70 0.625 5.750 5.625 7.750 11.25 5.06 2.75 11.436 1001 1127 1189 1377
Interchangeable where bracketed.
When no value is shown for “Pin ID”, swaging is omitted and the ID is the pipe body ID.
Pipe body yield strengths are shown for use in string design calculations.
Critical section areas are shown to permit calculating minimum parting loads.
Contact any location listed on the back cover of this catalog for detailed product data sheets and brochures. 29
Type 501 and Type 531 Features
PIN
Exceptional torque strength is 100% pipe body ratings for
developed through the simultane- tension and bending are provided
ous engagement of opposing by machining pin and box on upset
flanks of the dovetail thread. The pipe. Type 501 is machined on API
thread flanks provide a positive EUE pipe which Hydril swages and
torque stop which virtually stress relieves to ensure rated
eliminates pin end ID restrictions performance. This same profile
Tubular Products
caused by over-torque. machined on internal/external
upset ends is the Type 531
Workstring durability is connection (not shown.)
developed with the rugged,
coarse pitch thread and steep Streamlined OD in the pulling
taper for deep stabbing and to direction created by the pin
prevent cross-threading. Type 501 shoulder and box OD chamfer
and Type 531 have been used for make the Type 501 and Type 531
milling, drilling cement, jarring, suitable for multiple completions.
fishing, and diamond coring
operations. A wear indicator is provided by
the separation at the box face.
100% compression rating is After extended use as work tubing,
provided by the reverse angle when the separation reaches 0.1
stab flank of the dovetail threads. mm (.004”), the pin and box should
be set aside for recut.
100% collapse rating is created
with the lubricant seal of the 100% rated internal pressure
dovetail threads. seal is produced by the dovetail
threads. The seal maintains
Ideal for highly deviated, sealing capability under high
extended reach, and other tension, compression, and bending
applications demanding superior loads. Damaged threads can be
rotation-while-bending capability. field repaired.
The dovetail Wedge Thread
provides excellent performance in Pin face reduces stabbing
combined torsion, bending, and damage. Minor damage to the
tension or compression. face, which does not function as a
shoulder, can be field repaired.
Clearance OD facilitates running,
pulling, and circulating and Type 501 and Type 531 are
eliminates downhole coupling interchangeable with the Type
face hang-up. 561 connection. Damaged
connections can be recut to the
non-upset threaded and coupled
Type 561 retaining interchangeabil-
ity.
In. Lbs/Ft Inches Inches Inches Inches Inches Inches Inches 1000 Lbs 1000 Lbs 1000 Lbs
2.375 4.70 0.190 1.995 1.901 2.657 2.657 1.945 3.24 3.45 72 85 104
2.875 6.50 0.217 2.441 2.347 3.192 3.179 2.391 3.24 3.45 100 118 145
3.500 9.30 0.254 2.992 2.867 3.886 3.827 2.942 3.24 3.45 142 168 207
4.000 11.00 0.262 3.476 3.351 4.406 4.336 3.426 3.24 3.45 169 200 246
4.500 11.60 0.250 4.000 3.875 4.891 4.829 3.950 3.24 3.45 184 217 267
4.500 12.75 0.271 3.958 3.833 4.926 4.846 3.908 3.24 3.45 198 234 288
30
Type 561 Features
PIN
Exceptional torque strength is High tension and bending
developed through the simultane- strengths are developed using a
ous engagement of opposing run-out, dovetail thread machined
flanks of the dovetail thread. The on non-upset pipe. The dovetail
thread flanks provide a positive thread with its double reverse
torque stop which virtually elimi- flanks resists the tendency for
nates pin end ID restrictions radial disengagement of the partial
Tubular Products
caused by over-torque. depth threads.
PIN
In. Lbs/Ft Inches Inches Inches Inches Inches Inches Inches Inches Sq. In. 1000 Lbs 1000 Lbs 1000 Lbs
2.375 4.60 0.190 1.995 1.901 2.875 2.657 7.50 1.945 3.24 3.45 1.150 72 85 104
2.875 6.40 0.217 2.441 2.347 3.500 3.192 7.50 2.391 3.24 3.45 1.625 100 118 145
3.500 9.20 0.254 2.992 2.867 4.250 3.886 7.50 2.942 3.24 3.45 2.362 142 168 207
4.000 9.50 0.226 3.548 3.423 4.750 4.346 7.50 3.498 3.24 3.45 2.419 147 174 214
4.000 11.00 0.262 3.476 3.351 4.750 4.406 7.50 3.426 3.24 3.45 2.816 169 200 246
4.500 11.60 0.250 4.000 3.875 5.200 4.891 7.50 3.950 3.24 3.45 3.044 184 217 267
4.500 12.60 0.271 3.958 3.833 5.200 4.926 7.50 3.908 3.24 3.45 3.307 198 234 288
Contact any location listed on the back cover of this catalog for detailed product data sheets and brochures. 31
Series 500™ Wedge Thread™ Drill Pipe Tool Joint Features
PIN
32
Wedge Thread Drill Pipe Tool Joint Performance Data
2 3/8 6.65 7.20 EU-105 WT26 3 3/8 1 3/4 1.625 194 416 8750 12300 1.41
7.10 EU-105 WT23 3 1/8 1 1/2 1.375 194 387 8750 10400 1.19
Tubular Products
2 7/8 10.40 11.30 EU-105 WT31 4 1/8 2 1.875 300 697 16180 28500 1.76
11.30 EU-135 WT31 4 1/8 2 1.875 386 697 20800 28500 1.37
10.60 EU-135 WT26 3 3/8 1 3/4 1.625 386 416 20800 12300 0.59
10.50 IU-135 WT23 3 1/8 1 1/2 1.375 386 387 20800 10400 0.50
3 1/2 13.30 14.50 EU-105 WT38 4 3/4 2 9/16 2.438 380 877 25970 41000 1.58
14.50 EU-135 WT38 4 3/4 2 9/16 2.438 489 877 33390 41000 1.23
14.00 EU-135 WT31 4 1/8 2 1.875 489 697 33390 28500 0.85
13.30 IU-135 WT26 3 9/16 1 3/4 1.625 489 416 33390 12300 0.37
3 1/2 15.50 16.70 EU-105 WT38 4 3/4 2 1/2 2.375 452 907 29520 41000 1.39
16.70 EU-135 WT38 4 3/4 2 1/2 2.375 581 907 37950 41000 1.08
16.10 EU-135 WT31 4 1/8 2 1.875 581 697 37950 28500 0.75
4 14.00 16.00 EU-105 WT40 5 1/2 3 1/8 3.000 400 998 32600 54000 1.66
16.00 EU-135 WT40 5 1/2 3 1/8 3.000 514 998 41920 54000 1.29
15.50 IU-105 WT39 5 1/8 2 13/16 2.688 400 910 32600 46000 1.41
15.50 IU-135 WT39 5 1/8 2 13/16 2.688 514 910 41920 46000 1.10
15.20 IU-135 WT38 4 3/4 2 9/16 2.438 514 877 41920 41000 0.98
14.70 IU-135 WT31 4 1/8 2 1.875 514 697 41920 28500 0.68
4 15.70 17.60 EU-105 WT40 5 1/2 3 1/8 3.000 454 998 36130 54000 1.49
17.60 EU-135 WT40 5 1/2 3 1/8 3.000 583 998 46460 54000 1.16
17.10 IU-105 WT39 5 1/8 2 13/16 2.688 454 910 36130 46000 1.27
17.10 IU-135 WT39 5 1/8 2 13/16 2.688 583 910 46460 46000 0.99
16.80 IU-135 WT38 4 3/4 2 9/16 2.438 583 877 46460 41000 0.88
16.20 IU-135 WT31 4 1/8 2 1.875 583 697 46460 28500 0.61
4 1/2 16.60 19.10 EU-105 WT46 6 1/4 3 1/2 3.375 463 1280 43130 70000 1.62
19.10 EU-135 WT46 6 1/4 3 1/2 3.375 595 1280 55450 70000 1.26
17.80 IEU-135 WT40 5 1/2 3 1/8 3.000 595 998 55450 54000 0.97
17.60 IEU-135 WT39 5 1/8 2 13/16 2.688 595 910 55450 46000 0.83
17.10 IEU-135 WT38 4 5/8 2 9/16 2.438 595 877 55450 41000 0.74
4 1/2 20.00 22.50 EU-105 WT46 6 1/4 3 1/2 3.375 577 1280 51660 70000 1.36
22.50 EU-135 WT46 6 1/4 3 1/2 3.375 742 1280 66420 70000 1.05
21.50 IEU-135 WT40 5 1/2 3 1/8 3.000 742 998 66420 54000 0.81
21.30 IEU-135 WT39 5 1/8 2 13/16 2.688 742 910 66420 46000 0.69
20.80 IEU-135 WT38 4 5/8 2 9/16 2.438 742 877 66420 41000 0.62
5 19.50 23.30 EU-105 WT50 7 4 3.875 554 1440 57630 109000 1.89
23.30 EU-135 WT50 7 4 3.875 712 1440 74100 109000 1.47
22.60 IEU-105 WT50 6 5/8 3 5/8 3.500 554 1710 57630 109000 1.89
22.60 IEU-135 WT50 6 5/8 3 5/8 3.500 712 1710 74100 109000 1.47
21.40 IEU-135 WT46 6 3 1/2 3.375 712 1280 74100 70000 0.94
21.00 IEU-135 WT40 5 1/2 3 1/8 3.000 712 998 74100 54000 0.73
5 25.60 29.10 EU-105 WT50 7 3 7/8 3.750 742 1533 73160 109000 1.49
29.10 EU-135 WT50 7 3 7/8 3.750 954 1533 94060 109000 1.16
28.20 IEU-105 WT50 6 5/8 3 5/8 3.500 742 1710 73160 109000 1.49
28.20 IEU-135 WT50 6 5/8 3 5/8 3.500 954 1710 94060 109000 1.16
27.00 IEU-135 WT46 6 3 1/2 3.375 954 1280 94060 70000 0.74
26.60 IEU-135 WT40 5 1/2 3 1/8 3.000 954 998 94060 54000 0.57
5 1/2 21.90 24.70 EU-105 WT56 7 1/4 4 5/8 4.500 612 1473 70990 132000 1.86
24.70 EU-135 WT56 7 1/4 4 5/8 4.500 787 1473 91280 132000 1.45
25.50 IEU-105 WT56 7 1/4 4 3.875 612 1856 70990 135000 1.90
25.50 IEU-135 WT56 7 1/4 4 3.875 787 1856 91280 135000 1.48
24.30 IEU-105 WT54 7 4 3/8 4.250 612 1406 70990 120000 1.69
24.30 IEU-135 WT54 7 4 3/8 4.250 787 1406 91280 120000 1.31
25.00 IEU-135 WT50 7 4 3.875 787 1440 91280 109000 1.19
23.40 IEU-135 WT46 5 7/8 3 1/2 3.375 787 1280 91280 70000 0.77
5 1/2 24.70 27.20 EU-105 WT56 7 1/4 4 5/8 4.500 696 1473 79200 132000 1.67
27.20 EU-135 WT56 7 1/4 4 5/8 4.500 895 1473 101830 132000 1.30
28.00 IEU-105 WT56 7 1/4 4 3.875 696 1856 79200 135000 1.70
28.00 IEU-135 WT56 7 1/4 4 3.875 895 1856 101830 135000 1.33
26.70 IEU-105 WT54 7 4 3/8 4.250 696 1406 79200 120000 1.52
26.70 IEU-135 WT54 7 4 3/8 4.250 895 1406 101830 120000 1.18
27.40 IEU-135 WT50 7 4 3.875 895 1440 101830 109000 1.07
25.80 IEU-135 WT46 5 7/8 3 1/2 3.375 895 1280 101830 70000 0.69
6 5/8 25.20 28.30 IEU-105 WT66 8 5 3/8 5.250 685 1654 98810 168000 1.70
28.30 IEU-135 WT66 8 5 3/8 5.250 881 1654 127050 168000 1.32
27.00 IEU-135 WT56 7 4 5/8 4.500 881 1473 127050 131000 1.03
6 5/8 27.70 30.10 IEU-105 WT66 8 5 3/8 5.250 748 1654 106810 168000 1.57
30.10 IEU-135 WT66 8 5 3/8 5.250 962 1654 137330 168000 1.22
28.80 IEU-135 WT56 7 4 5/8 4.500 962 1473 137330 131000 0.95
Contact any location listed on the back cover of this catalog for detailed product data sheets and brochures. 33
Working Under Pressure
of all products, assures consistently high reliability. Above: Computer control of the latest precision manu-
facturing tools helps Hydril produce products with speed
Modern Facilities, Trained Craftsmen: Our and precision.
modern facilities, equipped with precision tools
and equipment, are operated by experienced,
trained craftsmen. This allows us to meet or
exceed standards as rigorous as any found in
other industries.
Quality Raw Materials: We
are ISO 9001 Certified,
assuring Hydril’s confor-
mation to high internation-
al standards for marine
and offshore products,
structural and mechani-
cal metal products, as
well as pressure vessels. For example, incoming
raw materials are stringently tested as part of Above: Unlike some
manufacturers, Hydril
Hydril’s QA program. Vendors are accepted only maintains significant
after an exhaustive review of their facilities inventories of key finished
piece parts. This allows
and capabilities. assembly and shipment of
many products without
Quality Products: These factors consistently delays caused by build-to-
order manufacturing. Inset: Top quality raw materials, formed, machined
produce products that continue to prove Hydril’s and finished in state of the art manufacturing facilities by skilled
six decade reputation for superior products. craftsmen, produce Hydril quality products you can depend upon.
34
Designed And Manufactured To Meet Your Requirements
Match your drilling requirements to quality Hydril products. The table below lists the pages in this
catalog where basic product information is available. For more detailed specifications, price and
delivery information, contact your Hydril representative.
ft.
ft.
0
0
N
00
00
00
IO
)
,H s
2S
,0
,0
3,
3,
ps nt
AT
s
r3
r3
de
To
To
m e
Te nm
IC
ve
ve
ra
s
s
PL
th
th
pg
w ro
ep
ep
lo vi
s
ce
tU
AP
th
th
h/ n
D
D
nt d
an
ig e E
ep
ep
en
ai An
r
rd
rd
ve
en
D
pm
da
da
(H m
M ir
ko
p
a
tre
an
an
ui
ee
ee
ep
or
Eq
Ex
St
St
W
D
R
Hydril Products To Use
Annular Blowout p.36 p.36 p.36 p.36 p.36 p.36 p.36 p.36
Preventers
Compact Blowout p.38 p.38 p.38 p.38 p.38 p.38 p.38 p.38
Preventers
Pressure Control
Diverters p.39 p.39 p.39 p.39
High Performance p.42-43 p.42-43 p.42-43 p.42-43 p.42-43 p.42-43 p.42-43 p.42-43
Chokes
Bettis Drill Pipe p.48 p.48 p.48 p.48 p.48 p.48 p.48 p.48
Protectors
Rototec Friction p.48 p.48 p.48 p.48 p.48 p.48 p.48 p.48
ReducersTM
Contact any location listed on the back cover of this catalog for detailed product data sheets and brochures. 35
Annular Blowout Preventers
operating chambers
to rated BOP GX Series: High performance for surface and
pressure is subsea. Handles pressures to 15,000 psi.
another test GL Series: For deep
administered to well and subsea
all Hydril annular applications.
BOPs. This Handles pressures
confirms strength, ® to 5,000 psi.
GL
reliability and product
GK Series: For
safety before delivery.
surface applications
on land and offshore
• Designed with only two moving parts
platforms, as well as
contributes to the long-term operating efficiency of
subsea service. MSP
these preventers. Only the piston and packing
Pressure ratings to 20,000 psi.
unit move, reducing areas subject to wear, and
lessening maintenance and downtime. MSP/SVX Series: Combines BOP and diverter
for surface or subsea use. Working pressure
• Fast, positive access to packing unit and capabilities from 500 to 2,000 psi, bore sizes
seals is made possible by the use of latched from 21 1/4” to 30”.
heads. That means minimum maintenance time.
A field replaceable wear plate in the head of the
36
Ram Blowout Preventers
Pressure Control
Sizes and Pressure Ratings
of Hydril Ram BOPs
Bore Sizes Working Pressure Ratings (psi)
2,000 3,000 5,000 10,000 15,000 20,000 Designed For Workover Blowout
7 1/16 ● ● ● ● Prevention
9 ● ●
The SentryTM blowout protector is a ram product
11 ● ● ● ● ●
designed to meet the special needs of workover
13 5/8 ● ● ● ●
operations. It is shorter and lighter than Hydril’s
16 3/4 ●
standard BOP’s, but doesn’t sacrifice any of
18 3/4 ● ● ● Hydril’s traditional strength and reliability.
20 3/4 ●
21 1/4 ● ●
Contact any location listed on the back cover of this catalog for detailed product data sheets and brochures. 37
Compact Blowout Preventers
Lighter Weight
Lower Height
Ideal for both rig upgrades and new builds where space is limited. Hydril’s compact blowout preventers
are typically 15 percent shorter than comparable conventional dual ram BOPs, and more than 20
percent lighter. Here’s an example:
Pressure Control
No compromise in operating capabilities. Hydril’s • Increased fluid flow capacity: Hydraulic mani-
compact BOPs provide the same reliability and fold design increases fluid flow capacity through
long service life the industry has come to respect the hinge by as much as 40 percent.
in its standard size ram BOPs. • Operating flexibility: Hydraulic manifold installs
• Easy field maintenance: Patented bonnet seal on either side of the BOP, permitting change of
permits low torque makeup, less time to open bonnet opening side as required to fit various
bonnet and access ram blocks. Fewer bonnet stack configurations.
bolts further reduce maintenance time.
• Reduced downtime: Upper seal seats and Compact Blowout Preventer
bottom wear plates can be replaced in service. Specifications
No need to disassemble the stack, remove it (Values are typical, and may vary with configuration. Studded
from the rig and ship to an offsite repair facility top,Type
flanged bottom,
Units dual ram types areSizes
shown)
Bore Inches 18 3/4 18 3/4 18 3/4 13 5/8
for time-consuming welding, stress-relief and
Pressure psi 5,000 10,000 15,000 15,000
re-machining. The hydraulic manifold is also
Height Inches 59 63 75 60
field replaceable. Weight Pounds 34,000 35,000 53,100 31,000
38
Diverters
Pressure Control
bore sizes and pressure ratings. Hydril Diverters Flow Selectors: Always-open massive hardened
can also be located subsea. two position target for use with 12” or 16” diverter
vent lines. Cannot be shut in.
SXV Diverter Spool: Used with large-bore
(20-30 inch) annular BOPs for surface or subsea
diverter service. Replaces diverter spool and
related valves.
Contact any location listed on the back cover of this catalog for detailed product data sheets and brochures. 39
Multiplex And Hydraulic Control Systems
For Subsea Blowout Preventer Stacks
Control of blowout preventers, • Upgradeable: Latest
choke-and-kill valves and related multiplex control can be
well control equipment in subsea retrofitted when required.
environments is much more
challenging than on land. Hydril’s Multiplex Subsea
subsea experience has provided the Control Systems: State-
skill and know-how to develop a of-the-art microprocessor-
comprehensive range of subsea based multiplex control
control systems with a long and suc- techniques use software
cessful history. Each system has and microelectronic
special requirements, and Hydril is circuitry to provide fast
able to provide tailored systems, response and redundancy.
using modular building blocks, that Painstaking mechanical
meet the entire range of needs. design and specially
selected construction
Conventional Hydraulic Subsea materials provide easy
Control Systems: Based upon maintenance and superior
proven design concepts, compo- protection for the system,
nents and subsea experience. to water depths of 10,000
This category includes shallow-to feet or more.
Pressure Control
40
Surface Control Systems For Blowout Preventers
Conventional Surface
Control Systems:
Hydril offers control for blowout
preventers used during surface
drilling projects, from workover
to standard drilling operations.
• Reliable: Field proven in world-
wide drilling operations, using
components which have
passed extended life-cycle test-
Pressure Control
ing.
• Rugged: Hydril’s experience in
hostile environments provides the
know-how to tailor a system to
any requirements. Hydril 15,000 psi BOP stack on Santa Fe International's jackup Galaxy I.
• Serviceable: Field-proven
performance also includes designs which • Reliable: Modern components have been thor-
allow fast, effective service and repair. oughly use-tested in actual working applications.
• Cost effective: Modular control hardware
Multiplex Surface Control Systems: occupies less space, provides more flexibility than
When flexibility and rapid response are required, hydraulic or electro-hydraulic
Hydril’s multiplexed control.
control systems fit
the task. Using • Time saving: Software
microprocessor- control facilitates fast and
based systems easy changes, with less
with software guid- fitting and handling
ed functions pro- time required.
vides maximum • Adaptable: Can be retro-
cost effectiveness. fitted with existing systems.
Changing operating condi-
tions are handled routinely. Data
can be measured, collected and
stored for instant or long-term reference. Electro-pneumatic system for controlling
BOPs on land rigs.
Contact any location listed on the back cover of this catalog for detailed product data sheets and brochures. 41
High Performance Chokes
Operating Principle:
The Impingement Effect
The heart of Hydril’s choke is the internal flowing velocities, corrosive fluids, H2S
trim design. A unique nozzle configu- and CO2, low temperatures, steam
ration directs flow through various injection and wells with heavy
sized opposing ports, forcing erosion potential.
the flow to impinge upon
itself within the nozzle. The Hydril was first to use
impingement effect dissi- the cage trim design in
pates the destructive a production choke:
energy associated this was the BFB
with many oil and gas introduced in 1978.
wells. Hydril’s PRB,
developed for high
The single largest flow rate, medium
contributor to choke pressure applica-
valve failure is tions, was intro-
energy associated duced in 1984.
Pressure Control
42
High Performance Chokes
BFB Flow Cone and Seat Nozzle PRB Plug and Nozzle
Stem Stem
Opposing Plug
Flow Ports
Opposing
Seat Nozzle Flow Ports
Seat Carrier
Pressure Control
BFB provides positive shut-off with Hydril’s seals are suitable for extreme temperature ranges
patented seat seal. When flow cone contacts seat and have a broad range of fluid compatibility.
seal, valve is closed. Continuing to move the flow
cone closed achieves a bubble tight shut-off. PRB is Hydril’s trim for moderate to severe
Closing movement compresses seat seal outward application. Plug movement is guided by the
and radially into full contact with flow cone. nozzle. This feature provides steady throttling,
ensures smooth operation and directs flow toward
Both trims are interchangeable in the field nozzle center to minimize wear. Extended nozzle
without modification of the valve body. Trim size design contains destructive forces within the trim
and material can be changed to alter flow for extra downstream body protection.
characteristics and adjust to changing well
conditions without changing the body. Balanced trim designs of each valve reduce
thrust load on the stem. As a result, torque
Hydril’s patented Stem Seal Stack is employed needed to operate valve is substantially reduced.
in both trim designs. U-shaped, spring energized
lip seals provide bi-directional sealing with con- Both valves feature large annulus areas
stant radial loading. Design also allows redundant around trim which reduce fluid momentum as it
sealing in a standard seal gland. These resilient enters valve, decreasing potential for erosion.
Contact any location listed on the back cover of this catalog for detailed product data sheets and brochures. 43
Pulsation Dampeners
K-Series
diverse applications.
44
Pulsation Dampeners
IP-Series
Hydril-White Rock Engineering Pulsation
Control Equipment
IP-Series is a versatile dampener for industrial
and production operations. Features include: Maintenance Free PASAFETM Suction Stabilizers
• ASME B&PV Section VIII, Div.1 (Standard) and Discharge Dampeners for oil well drilling
• Ideal for corrosive service since fluid is isolated provide such system benefits as:
from the body. • Improved MWD performance.
Replaceable bottom • Reduced pump operating costs.
plate is the only • Reduced pump room noise.
wetted metal part. • Reduced piping vibration.
• Capacity of 1/4, 1/2, 1, • No precharge required.
2 1/2, 5 or 20 gallons.
• Pressure ratings to PASAFE™ Flow Through Pulsation Control Units
10,000 psi. are designed and manufactured to reduce surges
• Nitrogen charged or in high pressure positive
maintenance free displacement pumps
versions. which handle abrasive,
Customized bottom plates corrosive, high
available in carbon steel, pressure and
Pressure Control
316 stainless steel or Teflon-coated carbon steel. temperature fluids.
Stainless steel In service world-
charge valve protected by a sturdy lifting eye wide, these rugged
cover. Diaphragms in 10 elastomers to units provide
accommodate any performance, temperature unrivaled hydraulic
or fluid requirements. fluid stabilization on
drilling rigs, slurry pipelines,
deep direct lift mine de-watering
Special Accessories systems, water purification systems and high
pressure water cleaning systems.
• Permanently installed cross-over gauge for
fast precharge. PASAFE Pulsation Control Units reduce hydraulic
• Precharge tester for fast precharge checking pressure disturbances caused by fluid flow
during down periods. variation generated by the pump crank
mechanism and “water hammer” when pump
check valves open and close. By reducing the
Computerized Sizing adverse effects of flow variation and acceleration,
the life of the pump and its expendable parts is
Hydril created a software program for sizing and significantly increased.
selecting pulsation dampeners for reciprocating
pump applications. Ask your Hydril representative
for a disk of The Hydril Pulsation Dampener
Selection Guide.
Contact any location listed on the back cover of this catalog for detailed product data sheets and brochures. 45
Kellyguard™ Valves
Hydril’s Kellyguard valves are manually sealing rated pressure. Downward pressure
operated ball valves used to close flow to equalizes well pressure below the ball. It reduces
the bore of the drill string and stem. friction between upper seat and
Kellyguard valves facilitate well ball, minimizing torque needed
control and present mud to rotate the ball and open
spillage. They attach the valve.
above and below the kelly
All interchangeable internal
to close the bore to upward
parts are stainless steel for low
flow from the wellbore, or
maintenance. They resist
downward flow during
corrosion and provide long
connection.
service life. Lubrication is not
Metal-to-metal seals are necessary except during assem-
effective under high or low bly. In most cases Kellyguard
pressure. Upper seat and valves have enough length on
ball seal high pressure from below. With each end to recut connections in
low pressure from below, the lower seat case of thread or shoulder dam-
spring forces the ball against the upper age.
seat for secure sealing.
Left, one piece standard Kellyguard valve serves as an upper kelly cock, lower kelly Hydril provides a wide
With pressure from cock, drill pipe safety valve and mud saver. Center, Hydril Kellyguard BOP Assembly
range of Kellyguard valves
Pressure Control
manufactured for National Oilwell Power Swivel. Right, Splined Top Drive
above, the ball is forced Replacement Kellyguard valve. The latter two serve top drive applications.
for use in drilling environ-
against the lower seat to
ments, including H2S.
contain mud and prevent spillage.
Standard Kellyguard valves are
Hydril designed and developed suitable for sour service when
the one-piece Kellyguard valve drilling fluids and chemicals
to serve the full range of kelly valve control the environment.
applications. Kellyguard The Hydril NACE Trim
valves are the industry Kellyguard valve is intended
standard. Its compact, one for use in limited H2S environ-
piece body is easy to ments. Internal parts are NACE
handle. It offers durability, compatible.
high pressure sealing, high In Hydril’s full NACE Kellyguard
tensile strength and high valve, both internal parts and
torsional strength. body meet NACE require-
10,000 and 15,000 psi ments. It is suitable for severe
protection. All Hydril H 2S applications.
models offer maximum Hydril provides a complete
protection ranges. Hydril range of sizes and thread
tests all shells at 1 1/2 connections for upper and
times rated working pressure. lower Kellyguard valves of:
Cutaway views of Hydril’s Kellyguard valve models. Each uses Hydril’s ball-seat
2 1/2” - 10/15,000 psi to
Automatic pressure structure for effective metal-to-metal sealing. Ball-seat dynamics provide pres- 5 1/4” - 10/15,000 psi.
balancing allows easy sure balancing which minimizes torque needed to open and close the valve. In
the crank assembly, a replaceable wear sleeve protects the body and provides
opening, even while a long service life.
46
Checkguard¨ Valves
Hydril’s Checkguard valves are drop-in check While tripping, Checkguard valves contain
valves for the drill string. They remain topside upward well bore pressure in the drill pipe,
until needed and are retrievable by wire line. allowing the top connection to be open.
They give drillers easy control of drill pipe
pressure. They prevent upward flow through the Checkguard valves use a spring and ball
drill pipe, yet allow fluid to be pumped downward design. Fluid can be pumped through the valve
to circulate the well. from the top. When fluid tries to flow from bottom
to top, it is sealed by the spring-loaded ball
against the seat.
Pressure Control
Left, landing sub is installed in lower end of drill string while tripping into the
hole. Center, check valve is dropped into an open tool joint and lodges in land-
ing sub. Right, retrieving tool is lowered by wire line, unlatches check valve and
lifts it to the surface. Need to trip drill string is eliminated.
Far left, Checkguard valve is not subject to wear as many downhole valves are.
Checkguard valves control upward pressure It remains topside until needed and only the landing sub is installed. Next, as
in the annulus and drill pipe while stripping valve sits in the landing sub, downward flow areas are maximized for high flow
capacity. Next, ball closes against upward pressure to 10,000 psi. Far right,
drill pipe. Latching check valves into the landing check valve retrieved by wire line.
sub contains pressure in the drill pipe.
Contact any location listed on the back cover of this catalog for detailed product data sheets and brochures. 47
¨
Drill Pipe Protectors
48
Control Line Protectors
®
Control Line Protectors Rubber Wipers
Bettis control line protectors provide internal Bettis wipers are made from a specially
channel ways to securely nest control lines. engineered rubber compound, formulated for
This assures control of vital downhole safety this specific application. Three types are
valves and prevents fouling of operating control available, in sizes from 9 to 26 inches:
lines while making up tubing. Control line
protectors should be applied to each side "Regular" and "Split"
of every tubing joint Dual Wipers: For
down to the standard sized
safety valve. drill rigs.
They also
serve as Type "D" Wipers: For
tubing smaller rigs, including
stabilizers. workover.
Pressure Control
New “Hinged Design”
Control Line Protectors
Contact any location listed on the back cover of this catalog for detailed product data sheets and brochures. 49
Elastomer Replacement Parts
For more than forty years, Hydril with high temperature, high pres-
has manufactured its own sure applications. Compounds are
elastomer elastomer packing designed and tested to resist high
units, ram rubbers and seals. corrosion, gasses and extremes
That's because they are crucial of temperatures.
to the safe and effective opera- • Natural rubber is
tion of blowout preventers. Hydril compounded for drilling with
customers have learned through water-based drilling fluids in
experience that using quality temperatures between -30° F
elastomeric products is cost and 212° F.
effective. Drilling operations can • Nitrile rubber, a synthetic
be jeopardized by a packing unit compound, is used with
Every Hydril packing unit is factory tested before
that does not meet rigorous Hydril shipping. Each unit is tested at 100 percent of
oil-based or oil-additive drilling
standards. Hydril BOPs and pack- working pressure on pipe and 50 percent on open fluids for temperatures between
ing units are respected around the hole. Every genuine Hydril packing unit is perfor- 32° F and 190° F.
mance proven before it gets to your well.
world for their durability and relia- • Neoprene rubber is for
bility. low temperature operating service and oil-based
drilling fluids. It can be used at temperatures
Quality starts with rubber stock: Hydril Elastomer between -30° F and 170° F.
and Industrial Products provides in-house com- • Seals for Hydril BOPs are manufactured from
pounding, mixing and processing of Hydril’s own special nitrile rubber material which provides
proprietary rubber formulations. Assured by start- long, trouble-free service in sealing against oil,
to-finish control of materials, close monitoring of gas or water.
Pressure Control
50
For Ram and Annular Blowout Preventers, Pulsation
Dampeners and Drill Stem Valves
Overhaul and Repair Services
Centers worldwide
are maintained by
Hydril with factory
trained service per-
sonnel to support
Hydril equipment.
In most circum-
stances, Hydril
Pressure Control
evaluates and
services BOPs
at regional Repair
Service Centers.
But, in remote
locations, a Hydril Hydril servicemen install new Hydril rubber packing unit, seals, and heat to a remanufactured 21 1/4” annular blowout preventer.
serviceman can
inspect at the site and often can supervise local but cost far less than a new blowout preventer.
repair work at a selected regional shop. This Customers receive value, quality, reliability and
keeps downtime to a minimum and reduces costly economy. There is no comparison between a
shipping expenses. Hydril fully remanufactured BOP and other used
BOPs. Every Hydril remanufactured BOP carries
Your Hydril serviceman evaluates your equipment
a 12 month warranty. The owner’s certification
and recommends procedures for restoring
book documents all inspections, test charts and
equipment to operation condition. Within Hydril
standards for safety, customers select the repairs manufacturing procedures.
to renew equipment in compliance with their
budget and service guidelines. Hydril buys carefully selected used BOP
equipment and parts for remanufacturing. Hydril
Remanufactured Equipment has strict standards and procedures for the
remanufacturing process. A no-shortcuts policy
Hydril provides fast delivery and quick turnaround assures quality and reliability. All manufacturing is
by buying used BOPs, then rebuilding them and performed by skilled technicians and is closely
maintaining inventory. These BOPs meet Hydril’s controlled on a dedicated line in Houston, Texas.
high performance standards for used equipment,
Contact any location listed on the back cover of this catalog for detailed product data sheets and brochures. 51
Worldwide Sales, Service and Manufacturing
Canada, Alberta, Calgary Nigeria, Warri U.S.A., California, U.S.A., Texas, Houston
Sales Office Sales Office, Field Service, Bakersfield Hydril Elastomer & Industrial Products
First Executive Centre Service Center Sales Office, Field Service, Products Manufacturing Plant
350 Seventh Avenue S.W. Suite 3000 Hydril Africa/TDPS Service Center Hydril Company
Calgary, Alberta T2P3N9 F21 Idugboe Estate Hydril Company P.O. Drawer 1888
Canada Ogunu, Warri 3237 Patton Way Humble, TX 77347-1888
Telephone: (403) 531-1590 Nigeria Bakersfield, CA 93308-5717 18000 Eastex Freeway
Fax: (403) 264-0585 Telephone: +234-53-232-565 Telephone: (805) 588-9332 Humble, TX 77347-1888
Fax: (805) 588-2550 Telephone: (281) 446-0041
Canada, Republic of Singapore, Fax: (281) 446-4709
Alberta, Edmonton Singapore U.S.A., Louisiana,
Sales Office, Field Service Sales Office, Field Service, Lafayette U.S.A., Texas, Houston
Manufacturing Plant Manufacturing Plant Sales Office, Field Service, Valvcon Manufacturing Plant
Hydril Canadian Company, Ltd. Hydril Private Ltd. Service Center Hydril Company
2307 8th Street 27 Benoi Sector Hydril Company 8641 Moers Road
P.O. Box 202 Singapore 629859 109 Burgess Drive Houston, TX 77075-1546
Nisku, Alberta 9E7Z3 Republic of Singapore Broussard, LA 70518-0525 Telephone: (713) 941-6639
Canada Telephone: +65-861-6933 Telephone: (318) 837-6654 Fax: (713) 941-5862
Telephone: (403) 955-2045 Fax: +65-861-1452 Fax: (318) 837-8988
Fax: (403) 955-7627
U.S.A., Texas, Houston
Switzerland, Fribourg U.S.A., Louisiana, Hydril Technology Center,
Mexico, Mexico City International Tubular Sales Office Sales Office, Field Service,
New Orleans
Sales Office, Field Service Hydril S. A. Manufacturing Plant
Sales Office
Hydril S.A. de C.V. P. O. Box 163 Hydril Company
Hydril Company
Hamburgo 213, 12° Piso CH-1709 Fribourg P.O. Box 60458
650 Poydras, Suite 2517
06600 Mexico, D.F. Switzerland Houston, TX 77205-0458
New Orleans, LA 70130
Telephone: +(525) 208-7208 Telephone: +41-37-821-251 3300 N. Sam Houston Parkway East
Telephone: (504) 568-1885
Fax: +(525) 208-7861 Fax: +41-37-248-397 Houston, TX 77032-3411
Fax: (504) 522-2263
Telex: (845) 942-642 HYIS CH Telephone: (281)) 449-2000
Mexico, Veracruz U.S.A., Louisiana, Fax: (281) 985-3353
Manufacturing Plant U.A.E. Telex: 168905 HYDRIL CSD HOU
Hydril S.A. de C.V. Westwego
Dubai, U.A.E. Manufacturing Plant
Av. Framboyanes Lote 4A Sales Office U.S.A., Texas, Odessa
Manzana 1 Hydril Company
Hydril S.A., Dubai Branch 201 Klein Sales Office, Field Service,
Cd. Industrial Bruno Pag Liai P.O. Box 25219 Hydril Company
Veracruz, Veracruz Westwego, LA 70094
#7 - Bitec Building Telephone: (504) 348-3348 13000 West Highway 80, East
Mexico Al Jadif Shipdock Odessa, TX 79765
Telephone: +52-29-810213 Fax: (504) 348-3629
Duba, U.A.E. Telephone: (915) 563-3730
Fax: +52-29-810102 Telephone: 971-4-523490 Fax: (915) 563-5426
Fax: 971-4-512711
U.S.A., Oklahoma,
Mexico, Villahermosa Oklahoma City U.S.A., Wyoming, Casper
Sales Office, Field Service United Kingdom, Sales Office, Field Service Sales Office, Field Service
Hydril S.A. de C.V. Hydril Company Hydril Company
Ave. Gregorio Mendez #836
Aberdeen, Scotland 4609-A South Rockwell Ave.
Sales Office, Field Service, P.O. Box 124
Colonia Centro Oklahoma City, OK 73127-5039 Casper WY 82602
Villahermosa, Tabasco Manufacturing Plant Telephone: (405) 745-6025 - Tub
Hydril U.K. Ltd. 3501 North Poplar
Mexico 86000 Telephone: (405) 745-6022 - Pres Con Casper, WY 82601
Telephone: +52-931-449-44 Minto Avenue Fax: (405) 745-6026
Altens Industrial Estate Telephone: (307) 266-2120
Telephone: +52-931-449-42 Fax: (307) 234-2192
Fax: +52-931-225-06 Aberdeen, AB1 4JZ
Scotland
U.S.A., Texas,
Telephone: +441-224-878-824 Corpus Christi Venezuela, Puerto La Cruz
Nigeria, Port Harcourt Fax: +441-224-898-524 Sales Office, Field Service Sales Office, Field Service
Sales Office, Field Service Hydril Company Hydril Company
Hydril Africa/TDPS 730-F Diamond Cut Road Av. Intercomunal
4 Evergreen Street U.S.A., Alaska, Anchorage Corpus Christi, TX 78409 C.C. Colonis, Piso 1-F
Ogbonda Estate Sales Office, Field Service Telephone: (512) 289-5031 - Press Con Barcelona, Anzoatequi
Port Harcourt Hydril Company Telephone: (512) 289-5034 - Tub Venezuela
Nigeria 5401 Cordova, Suite 201 Fax: (512) 289-0258 Telephone: +58-81-762083/741651
Telephone: +234-84-332281 Anchorage, AK 99518 Fax: +58-81-761-271
Telephone: (907) 563-3262
Fax: (907) 562-0865
Headquarters
Hydril Company
P. O. Box 60458 Houston, TX 77205-0458
▼
1-800-999-1601
Toll Free in the U.S.A. and Canada
http://www.hydril.com
INFORMATION REQUEST VIA COMPOSITE CATALOG®
For additional product/service information from this company; complete this form, print and
fax to the contact listed below.
To: From:
CITY
STATE
ZIP
COUNTRY
PHONE
FAX
This 43rd(1998-99) Edition of COMPOSITE CATALOG ® is published by World Oil ® • A Gulf Publishing Company Publication • P. O. Box 2608, Houston TX, 77252-2608, U.S.A.