Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
(3) Loosen the adjusting screw and the lock nut of the
Adjusting screw of rocker arm
Cam base Roller crosshead completely.
circle Lock nut
Adjusting screw of
crosshead CAUTION • Provide the adjusting screw protrusion of
10 mm or more
10 mm or more from the top surface of the
crosshead. If the adjusting screw is not
completely separated from the valve stem,
Clearance correct adjustment is not allowed.
Close contact
Nut
SAPH300020900175
(4) Insert a thickness gauge between the rocker arm and the
crosshead and adjust the clearance with the adjusting screw of the rocker
arm. Tighten the lock nut.
Rocker arm Thickness gauge
Hino J08E Intake Valve Lash Clearance (cold) .30MM or .0118 Inch
Hino J08E Exhaust Valve Lash Clearance (cold) .45MM or .0177 Inch
SAPH300020900176
Close contact
Close contact
SAPH300020900178
Email: EngineParts@HeavyEquipmentRestorationParts.com
Phone: 269 673 1638
Website: www.HeavyEquipmentRestorationParts.com