Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Ariane Avado
Grade 10 – Saturn
SPIN ME!
Objectives:
To learn and to know how electric and magnetic works together by using fidget spinner
and electromagnetic.
To learn how to make a simple electric motor using spinner and coil
Materials:
Magnets (neodymium)
Keep switch
Copper wire coil
Battery 7.5 V
Procedures:
1. Roll the copper wire into an empty little bottle to 0.44mm 180 turns
2. Remove the spinner accessories
3. Place the magnet into three (3) corners of the spinner
4. Add the woodstick in the middle of the spinner
5. Add woodstick in the middle of the spinner with magnets
6. Then, paste it in a little piece of flywood
7. Place another woodstick beside of spinner with magnet, and apply reed switch and
battery 7.5 V
8. Apply a small amount of glue at the coil then paste it another woodstick
9. Place the coil with woodstick in the front of spinner with magnet
Concept:
When magnet gets close to the reed switch with the two contacts. The coil iron pushes
magnet with the spinner the reed switch de