Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Disclaimer: All the changes below will be done on your own risk!!!
Do not change anything if you do not know exactly what you are doing!!!
!!!!!!!!!!
Disable NAV & Phone warning messages while entering data at speed
Enable DRL
Enable fog lamp to come on for the same side as that turn signal
Enable TPMS
Audi A4/S4 B8
[09 – Cent. Elect.] [Coding - 07] -> [Dropdown] -> "x ** 8K1 955 119 ** WWS xxxx" -> Long Coding
Helper -> Byte 1
________________________________________
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 10
Submodule 0
[46 – Central Conv.] [Coding - 07] -> Long Coding Helper -> Byte 9
________________________________________
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 3
________________________________________
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 5
Bit 3 - Set to 0 to disable "lights are on" warning when you open the door.
________________________________________
Disable NAV & Phone warning messages while entering data at speed
[5F - Information Electr.] -> Adaptation -> Set channel 2 & 3 to 250
________________________________________
[17 - Instruments] [Coding - 07] -> Long Coding Helper -> Byte 0
________________________________________
[46 - Comfort System] [Coding - 07] -> Long Coding Helper -> Byte 8
________________________________________
Reset MMI
________________________________________
Select “Single Gear Display” from top channel drop down menu
________________________________________
________________________________________
[5F - Information Electr.] [Coding - 07] -> Long Coding Helper -> Byte 6
Bit 1 – Set to 1
[08 - Auto HVAC] [Coding - 07] -> Long Coding Helper -> Byte 1
Bit 3 – Set to 1
Bit 4 – Set to 1
________________________________________
Reset MMI
or
[56 - Radio] -> Adaption -> Channel 39, add 16 to your value
________________________________________
Enable DIS with Efficiency Program for MY2010+ (Not a complete Program without the Start/Stop
System)
change 0 to 255
________________________________________
Add 4
________________________________________
[09 – Cent. Elect.] -> [Coding – 07] -> Long Coding Helper -> Byte 3
Bit 5 set to 1
________________________________________
Enable DRL
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 2
________________________________________
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 9
Bit 0 - Set to 1
________________________________________
Enable fog lamp to come on for the same side as that turn signal
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 4
________________________________________
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 10
Once the change has been made you can enable the front turn signals as DRL's by making the
following change:
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 2
Bit 6 - Check the box or change :Bit 0 set to 1
________________________________________
[17 - Instruments] [Coding - 07] -> Long Coding Helper -> Byte 1
________________________________________
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 4
________________________________________
change 0 to 1
________________________________________
[Hidden menu]
Main/Diagnose/Settings
Import Media
Set to 4 of 4 "Copy/Ripping"
________________________________________
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 4
________________________________________
[17 - Instruments] [Coding - 07] -> Long Coding Helper -> Byte 1
[46 - Cent. Conv.] [Coding - 07] -> [Long Coding Helper] Byte 2
Bit 2 - Set to 1
______________________________________
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 2
_____________________________________
________________________________________
________________________________________
[52 Door Elect, Pass.] -> [Coding - 07] -> [Long Coding Helper] -> Byte 4
Bit 3 set to 1
________________________________________
________________________________________
Enable TPMS
* You need the 1AT ABS unit – check your stickers (1AS does not work)
[17 - Instruments]
Reset MMI
________________________________________
[Security Access] Enter Digits 6, 13, 10, 14, 11 of the 1st Serial number
Set to 255
Reset MMI
________________________________________
________________________________________
________________________________________
________________________________________
change to e.g. 10
________________________________________
[17 - Instruments]
DIS: 23 MPG.
________________________________________
[09 – Cent. Elect.] [Security Access - 16] (enter security code. One of the default codes is- 20113)
[Adaptation 10] -> Channel 64 - Stored Value = 218 = Starting mode is always D
Channel 64 - New Value = 00; Starting mode is determined by ADS selection at engine shutdown
(Comfort and Auto=D, Dynamic=S, Individual=whatever you pick)
Channel 64 - New Value = 03; Starting mode is always S regardless of ADS selection at engine
shutdown (opposite of stock)
Channel 64 - New Value = 11; Starting mode is S with all ADS settings at shutdown except Comfort
where it's D
Channel 64 - New Value = 19; Starting mode is S with all ADS settings at shutdown except Auto where
it's D
________________________________________
----------------------------
Hidden menu in MMI Navi Plus (3G): (Only for Navigation equipped cars)
change 0 to 1
________________________________________
In cars with adaptive cruise control the default distance (1 to 4) can be changed from the CAR menu.
If this menu option is hidden in you car, apparently you can enable it with VAG-COM. From the Auto
distance regulation module 13, Adaptation, Channel 7, change 0 to 1, Save.
_______________________________________