Following table is from 36.331 7.3 Timers (Informative)
Timer Start Stop At expiry
T300 Transmission of RRCConnectionRequest Reception of RRCConnectionSetup or Perform the RRCConnectionReject message, cell actions as re-selection and upon abortion of specified in connection establishment by upper 5.3.3.6 layers T301 Transmission of Reception of Go to RRCConnectionReestabilshmentRequest RRCConnectionReestablishment or RRC_IDLE RRCConnectionReestablishmentReject message as well as when the selected cell becomes unsuitable T302 Reception of RRCConnectionReject Upon entering RRC_CONNECTED and Inform upper while performing RRC connection upon cell re-selection layers about establishment barring alleviation as specified in 5.3.3.7 T303 Access barred while performing RRC Upon entering RRC_CONNECTED and Inform upper connection establishment for mobile upon cell re-selection layers about originating calls barring alleviation as specified in 5.3.3.7 T304 Reception of Criterion for successful completion of In case of cell RRCConnectionReconfiguration handover to EUTRA or cell change change order message including the MobilityControl order is met (the criterion is specified from E-UTRA Info or reception of in the target RAT in case of inter- or intra E- MobilityFromEUTRACommand message RAT) UTRA including CellChangeOrder handover, initiate the RRCconnection re- establishment procedure; In case of handover to E- UTRA, perform the actions defined in the specifications applicable for the source RAT. T305 Access barred while performing Upon entering RRC_CONNECTED and Inform upper RRCconnection establishment for upon cell re-selection layers about mobile originating signalling barring alleviation as specified in 5.3.3.7 T310 Upon detecting physical layer problems Upon receiving N311 consecutive in- If security is i.e. upon receiving N310 consecutive sync indications from lower layers, not activated: out-of-sync indications from lower upon triggering the handover go to layers procedure and upon initiating the RRC_IDLE connection re-establishment procedure else: initiate the connection re- establishment procedure T311 Upon initiating the RRCconnection Selection of a suitable E-UTRA cell or Enter reestablishmentmprocedure a cell using another RAT. RRC_IDLE T320 Upon receiving t320 or upon cell Upon entering RRC_CONNECTED, Discard the (re)selection to E-UTRA from another when PLMN selection is performed on cell reselection RAT with validity time configured for request by NAS, or upon cell priority dedicated priorities (in which case the (re)selection to another RAT (in information remaining validity time is applied). which case the timer is carried on to provided by the other RAT). dedicated signalling. T321 Upon receiving measConfig including a Upon acquiring the information Initiate the reportConfig with the purpose set to needed to set all fields of cellGlobalId measurement reportCGI for the requested cell, upon receiving reporting measConfig that includes removal of procedure, the reportConfig with the purpose set stop to reportCGI performing the related measurements and remove the corresponding measId