Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
DESIGN DATA
This data sheets list only Kurbo standard metal expansion joints. For a design not included in this
catalogue, please contact Kurbo at kurbo@kurbo.co.kr or at 82. 51. 831. 1291
The specifications in this data sheets are subject to change for product improvement
28 KURBO
SINGLE BELLOWS UNIT (SEJ, TSEJ, HEJ, GEJ)
End Connections
Weld End Flange Van Stone Flange Flange / Weld End Van Stone / Weld End Van Stone / Flange
WW FF VV FW VW VF
31 KURBO
Non-Concurrent Movement Spring Rate Overall Length and Weight
Nominal Size
WW FF ftAq
Axial Lateral Angular Axial Lateral Angular
(mm) (mm) (deg.) (kg/mm) (kg/mm) (kg·m/deg.) OAL WT OAL WT
mm inch (mm) (kg) (mm) (kg)
Notes
1. Rated cycle life is 5000 cycles for any one movement 5. Standard bellows materials in SS 304,316 and 321.
tabulated per EJMA. 6. For higher pressure, temperature, movement and cycle
2. To obtain greater movement or cycle life, contact Kurbo ratings, contact Kurbo.
3. Maximum axial extension movement is half of tabulated 7. Correct anchoring and guiding must be used.
axial value 8. Multi ply, Toroidal bellow are also available.
4. Standard materials for flange, pipe and attachment are
carbon steel
32 KURBO
SINGLE BELLOWS UNIT (SEJ, TSEJ, HEJ, GEJ)
End Connections
Weld End Flange Van Stone Flange Flange / Weld End Van Stone / Weld End Van Stone / Flange
WW FF VV FW VW VF
33 KURBO
Non-Concurrent Movement Spring Rate Overall Length and Weight
Nominal Size
WW FF ftAq
Axial Lateral Angular Axial Lateral Angular
(mm) (mm) (deg.) (kg/mm) (kg/mm) (kg·m/deg.) OAL WT OAL WT
mm inch (mm) (kg) (mm) (kg)
150 SEJ WW 20 L
Part Numbering System Example :
ND/DN TYPE END PRESS LINER
Notes
1. Rated cycle life is 5000 cycles for any one movement 5. Standard bellows materials in SS 304,316 and 321.
tabulated per EJMA. 6. For higher pressure, temperature, movement and cycle
2. To obtain greater movement or cycle life, contact Kurbo ratings, contact Kurbo.
3. Maximum axial extension movement is half of tabulated 7. Correct anchoring and guiding must be used.
axial value 8. Multi ply, Toroidal bellow are also available.
4. Standard materials for flange, pipe and attachment are
carbon steel
34 KURBO
DOUBLE BELLOWS UNIT (UEJ, TUEJ, DHEJ, DGEJ)
Notes
1. Rated cycle life is 5000 cycles for any one movement 5. Standard bellows materials in SS 304,316 and 321.
tabulated per EJMA. 6. For higher pressure, temperature, movement and cycle
2. To obtain greater movement or cycle life, contact Kurbo ratings, contact Kurbo.
3. Maximum axial extension movement is half of tabulated 7. Correct anchoring and guiding must be used.
axial value 8. Multi ply, Toroidal bellow are also available.
4. Standard materials for flange, pipe and attachment are
carbon steel
36 KURBO
DOUBLE BELLOWS UNIT (UEJ, TUEJ, DHEJ, DGEJ)
Notes
1. Rated cycle life is 5000 cycles for any one movement tabulated per EJMA.
2. To obtain greater movement or cycle life, contact Kurbo
3. Maximum axial extension movement is half of tabulated axial value
4. Standard materials for flange, pipe and attachment are carbon steel
5. Standard bellows materials in SS 304,316 and 321.
6. For higher pressure, temperature, movement and cycle ratings, contact Kurbo.
7. Correct anchoring and guiding must be used.
8. Multi ply, Toroidal bellow are also available.
37 KURBO
EXTERNALLY PRESSURIZED EXPANSION JOINT
SXP DXP
Nominal Size Axial Length Pressure Nominal Size Axial Length Pressure
Type Movement FF & WW Thrust Type Movement FF & WW Thrust
mm inch (mm) (mm) (kg) mm inch (mm) (mm) (kg)
38 KURBO
Pressure: 150 PSI / 10 Bar Pressure: 300 PSI / 20 Bar
Nominal Size Axial Length Pressure Nominal Size Axial Length Pressure
Type Movement FF & WW Thrust Type Movement FF & WW Thrust
mm inch (mm) (mm) (kg) mm inch (mm) (mm) (kg)
D: Drain connection
P: Purge connection
Notes
1. Rated cycle life is 5000 cycles for non-concurrent movement tabulated per EJMA.
tAq 2. Maximum test pressure is 1.5 times the rated pressure
3. For special component, please specify and contact Kurbo
39 KURBO
CORROSION RESISTANCE GUIDE
This "Corrosion Resistance Guide" is to be used only as a guide in selecting the most satisfactory
material for resistance to various chemical solutions. If in question, contact Kurbo with application
details
INCONEL 625
MONEL 400
MONEL 400
SS 316
SS 316
SS 321
SS 321
Flowing Flowing
Media/Chemical Media/Chemical
54 KURBO