Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
WARNING
All hanger products in this catalog are intended for installation and service as illustrated or described. Do not
use them for any purposes other than those described in this catalog. Products that are used for unintended
purposes could fail, resulting in severe personal injury or death.
Examples of misapplications which could cause severe personal injury or death include, but are not limited to:
• Using a beam clamp on a beam other than those described in the catalog;
• Using concrete inserts as anchors for pulling pipe up to the required elevation;
• Suspending clevis hangers, one under another, which could result in an accumulative load that is
greater than that which the pipe hanger will support.
B-Line pipe hanger and support products are manufactured in accordance with industry standards. Our
customers should exercise care to use these products properly so as to avoid potential accidents. Contact
B-Line for assistance with proper installation and use of the products in this catalog.
NOTICE
Cooper B-Line reserves the right to change the specifications, materials, equipment, prices or the
availability of products at any time without prior notice. While every effort has been made to assure the
accuracy of information contained in this catalog at the time of publication, Cooper B-Line is not
responsible for inaccuracies resulting from undetected errors or omissions.
SINCE
1924
Pictorial Index
B351L B3036L B3362 thru B3365
Steel C-Clamp Malleable Iron Retaining Strap B3037 B3031-3/8
With Locknut C-Clamp Page 29 Light Duty B3033
Z-Purlin Beam Clamp
Page 28 With Locknut Malleable C-Clamp Wide Jaw
Page 29
Page 28 Page 30 Top Flange
C-Clamp
Page 30
B312
Retaining Strap B3054
Page 39 Malleable Iron
B3050 B3040 B3055 Beam Clamp
Beam Clamp Adjustable Beam Clamp Steel Beam Clamp Page 42
Page 40 Page 40 Page 41
Fig. 1CBS
Clevis Pipe Spacer B3102
B3100 B3100C
Page 48 AWWA B3100F
Standard B3108 Plastic Coated
Clevis Hanger Felt Lined
X
Clevis Hanger Extended Standard
Page 51 Standard
Pages 49 & 50 Clevis Hanger Clevis Hanger
Page 52 Page 53 Clevis Hanger
Page 53
B3104F B3104C
B3104 B3104CTC
Felt Lined Plastic Coated B3104CT
Light Duty Plastic Coated
Light Duty Light Duty Copper Tubing
Clevis Hanger Copper Tubing
Page 57 X Clevis Hanger Clevis Hanger Light Duty Clevis
u Page 58
Page 57 Hanger Light Duty Clevis
Page 57
u
Hanger
Page 58
Fig. 2F
B3170CT B3170CTC
Felt Lined
Fig. 2 Copper Tubing Copper Tubing
Adjustable Band Hanger
Page 60 u
Adjustable Band Hanger Adjustable Swivel Ring Plastic Coated
Page 59
Page 60 u
Page 59 Adjustable Swivel Ring
u DURA-COPPER™ Finish
X Available in DURA-GREEN™ Finish (Other hangers may be available with the DURA-GREEN finish, contact factory)
Pictorial Index
Fig. 200
Fig. 200 H
Trimline Adjustable
Heavy Duty
Band Hanger
Band Hanger
Page 61
Page 62
B3198R
Fig. 200F Extension
Felt Lined Split Pipe Clamp
Trimline Adjustable B3198H
Page 63
Band Hanger Hinged Extension
Split Pipe Clamp B3198RCT
Page 61
Page 63 Copper Tubing
Extension
Page 64 u
Split Pipe Clamp
Fig. 200C B3198HCT
Plastic Coated Copper Tubing
Trimline Adjustable Hinged Extension
u
Band Hanger Split Pipe Clamp
Page 61 Page 64
B3191
B3175CT Straight 'J' Hook
B3175
Copper Tubing B3190 Page 66
Ring and Bolt Hanger
Page 65 u
Ring and Bolt Hanger Offset 'J' Hook
Page 65
Page 66
Fig. 120W
Fig. 120MJ
Wrap Around
Mutt & Jeff
Fig. 120RWA Fig. 120 ‘U’ Hanger
‘U’ Hanger
Retrofit Wrap Around ‘U’ Hanger Page 69 B3262
Page 69
“u Hanger Clamp Page 68 Light Duty
Page 67 Spring Hanger
Page 70
u DURA-COPPER™ Finish
B3373C
Plastic Coated B3373CT
Standard Riser Clamp Copper Tubing
Page 75 u
Page 74 Riser Clamp
B3373F B3373CTC
B3373 Felt Lined Copper Tubing
Standard Riser Clamp Standard Riser Clamp Plastic Coated
Page 74 Page 74
u
Riser Clamp
Page 75
B3132
B3134
Two-Bolt
Four-Bolt Fig. 4A
Underground Clamp
Underground Clamp Pipe Clamp for
Page 76 B3140
Page 77 Sway Bracing Standard Pipe Clamp B3140C
Page 78 Pages 79-80 Plastic Coated
Standard Pipe Clamp
Pages 79-80
B3134W
B3132W
Washer
Lug Washer
Page 77
Page 76
B3140F
Felt Lined
Standard Pipe
Clamp B3142
Pages 79-80 B3141 Heavy Duty Pipe Clamp
A.W.W.A. Pipe Clamp Page 82 B3144
Page 81 Double Bolt Pipe Clamp
Pages 83 & 84
Fig. 4B
Pipe Clamp For B3180FL
Sway Bracing B3148 Flush Mount
B3146 Offset Pipe Clamp B3149
Page 86 Pipe Strap
Heavy Duty Double Page 87 Marine Hanger Page 89
Bolt Pipe Clamp Page 88
u DURA-COPPER™ Finish
Page 85
Pictorial Index
Fig. 22 Fig. 22L2
Fig. 23
B3180 Single Fastener One Hole Hanger/Restraint
B2400 Double Fastener
Extended Leg CPVC Strap For CPVC & Steel Pipe
Standard Pipe Strap CPVC Strap
Pipe Strap Page 93 Page 94
Pages 91-92 Page 95
Page 90
B3184
Fig. 29 Light Duty BPRC Series BPIC Series
Double Offset Offset Hanger & Rod Mount BPSC Series
Hanger & Restrainer Restrainer for KWIK-CLIP Channel Mount
for CPVC Pipe CPVC & IPS Pipe Page 103 KWIK-CLIP
Page 101 Page 102 Page 104
B3110 B3114
Adjustable Steel Pipe Roll With Sockets B3122 B3122A
Adjustable Roller Support
Page 106 X
Yoke Pipe Roll Page 107 Adjustable Double
Page 108 Roller Guide
B3120
Roller Chair B3124 B3126
Page 110 Roller Support Roller Support
Page 111 Page 112
B3118SL B3119SL
Adjustable Roller Stand Roller With Steel B3264 B3114R B3117R
With Base Plate Base Plate Spring Cushion Hanger Long Pipe Roll Only Short Pipe Roll Only
Page 118 Page 119 Page 120 Page 121 Page 122
B3088T
B3088 Threaded Base Stand
B3380 B3089
Base Stand B3090
thru B3384 B3088ST Pipe Support
360° Calcium B3088S Seismic Threaded Pipe Saddle
B3096 Adjuster
Silicate Shield Seismic Base Stand Base Stand Support
Adjustable Pipe Page 128
Page 124 Pages 125 & 126 Pages 125 & 126 With U-Bolt
Saddle Support Pages 129 & 130
Page 127
Pictorial Index
B3195 B3281 thru
I.P.S. Isolator B3287
B3195CT Pipe Alignment B3147A
Copper Tubing Guide B3147B
Isolator Pages Anchor Chairs
Page 140 141 & 142 Pages 143 & 144
B2417
Pipe Guides
Page 143
B3256
B3257 B3991 thru B3993 B3160 thru B3165
Hold-Down
Base Plate B3891 thru B3897 Pipe Slides Pipe Covering
Anchor Clamp
Page 146 Pipe Slides Pages 151 - 154 Protection Saddle
Page 145
Pages 147 - 150 Pages 155 - 160
B3155
B3151 B3153 B3154 Short Insulation BPH Series
Insulation Protection BPS Series
Insulation Short Insulation Protection Shield Snap N’Shield
Shield With Tabs Snap N’Shield
Protection Shield Protection Shield With Tabs Clevis
Page 162 Pages 165 & 166
Page 162 Page 163 Page 163 Page 164
Fig. 800
Fig. 4B Adjustable Sway Fig. 825
Pipe Clamp For Fig. 4L Bar Joist Sway
Longitudinal “In- Brace Attachment
Sway Bracing Fig. 4LA To Steel Brace Attachment
Fig. 4A Line” Sway Brace
Page 169 Longitudinal “In- Page 173 Page 174
Pipe Clamp For Attachment
Sway Bracing Line” Sway Brace
Page 170
Page 168 Attachment
Pages 171 & 172
Fig. 909
Fig. 907 No-Thread Swivel
Fig. 825A Fig. 828 Fig. 906
4-Way Sway Brace
Bar Joist Sway Universal Sway Sway Brace Multi-
Longitudinal Sway Attachment
Brace Attachment Brace Attachment Fastener Adaptor
Brace Attachment Page 179
Page 175 Page 176 Page 177
Page 178
Fig. 910
Swivel Sway Brace
Attachment
Fig. 980 Fig. 981
Page 180
Universal Swivel Fast-Attach
Sway Brace Universal Swivel Sway Fig. 985 Fig. 986
Fig. 975 Brace Attachment
Attachment Mechanical Fast Mechanical Fast
Straight Sway Page 183
Page 182 Clamp Clamp
Brace Fitting
Page 181 Page 184 Page 184
Fig. 990 Fig. 991 Fig. 1000 Fig. 1001 Fig. 2002
Cable Sway Fast Attach Fast Clamp Sway Brace Sway Brace
Brace Attachment Cable Sway Brace Sway Brace Attachment Attachment
Page 186 Attachment Attachment Page 189 Page 190
Page 187 Page 188
Concrete Inserts
Fig. 109AF
Spot Insert
Page 194
B3019
Adjustable Metal
Fig. 109A
Deck Ceiling Bolt
Concrete Deck Insert B2499
Page 193
Page 192 Heavy Duty Spot Insert
Page 195
Pictorial Index
BE-5-8
B2503 B22I, B32I, B52I BD40 BE-9-12
Heavy Duty Spot Insert Continuous Concrete Inserts Fastener Clip Fastener Clip
Page 199 Pages 200 - 202 Page 203 Page 203
BRACKETS
B3068
Light Duty Welded B3064 B3066
B3065 Medium Duty Welded B3067
Bracket Adjustable Strut Bracket Heavy Duty Welded Bracket
Page 206 Light Duty Welded Bracket
Page 207 Page 210
Bracket Page 209
Page 208
B3069E
B3069W “O” Bracket
Welded Knee Brace Page 211
Page 211
Upper Attachments
B3060L
Side Beam
Angle Clip
Page 215
B3199 Fig. 78
B3199CT
Ceiling Flange All Steel Ceiling Plate
Dura-Copper Coated
Page 214 Page 214
u
Ceiling Flange
Page 214
B3061
Fig. 51 Fig. 50
B3070 B3060 Angle Bracket
Side Beam Angle Clip Side Beam Bracket For
Reversible Angle Clip Side Beam Angle Clip Page 217
Page 216 NFPA Rod & Fastener Sizing
Page 215 Page 216
u DURA-COPPER™
Page 217
Finish
Fig. 58 Fig. 75
Threaded Side Swivel Attachment
Beam Bracket Page 219
Page 218
Fig. 56
Tapped Side
Beam Connector
Page 217
Threaded Accessories
B3188C
Plastic Coated
Standard U-Bolt
Pages 231 & 232
B501 B3188
Light Weight U-Bolt Standard U-Bolt
B3200 Page 230 Pages 231 & 232
Weldless Eye Nut
Page 229
B3224
Hanger Adjuster
B3222 B3203
B3223 B3224CT
Eye Socket B3201 Extension Piece B3202
Offset Eye Socket Dura-Copper Coated
Page 228 Forged Steel Clevis Page 234 Turnbuckle
Page 234
Page 235 u
Page 233 Hanger Adjuster Page 235
u DURA-COPPER™ Finish
Pictorial Index
B3210
B3205 Eye Rod
B3210X
Machine Threaded Rod Page 239
ATR Linked Eye Rod
Page 236 All Threaded Rod Page 240
Page 236
B3214
Tie Bolt
Page 238
B3211
Welded Eye Rod
239
B3211X
Fig. 98 Linked Welded Eye Rod
Rod Stiffener Fig. 98B Page 240
Page 237 Rod Stiffener with
Break Off Bolt Head
Page 237 B3213
SC228
Coach Screw Rod
Rod Stiffener
Page 238
Page 237
B655
Steel Rod Coupling
B3212
Page 242
J-Bolt
Page 241 B656
Steel Reducer
B3228 DS 16 x 2
Rod Coupling
Hex Head Lag Bolt #16 x 2"
Page 242
Page 241 Drive Screw
Page 241
B3220 B200
Malleable Iron Square Washer B3248
Rod Coupling Page 243 Steel Washer Plate
HN - Hex Nut
Page 243 Page 244 B3234 HHN - Heavy Hex Nut
Bevel Washer Page 245
Page 244
AWA
FW LW FFW ATB Wedge Anchor
Flat Washer Lock Washer Flat Fender Washer Toggle Bolt Page 247
Page 246 Page 246 Page 246 Page 247
NNP CNP
Ribbed Neoprene Pad Cork and Ribbed CNNK VRP
Page 251 Neoprene Pad Cork, Ribbed Neoprene Rubber Cube Pad
Page 251 and Steel Page 252
Page 252
HMLE/HME
Housed 1"
Deflection Mounting
NVD
Pages 257 & 258
Double Deflection
Page 253 CM
Metal Housing and Neoprene BVS
Page 254 Vibra Strip™ for
OML/OM 15/8" Wide B-Line
Spring Mount channel
Pages 255 & 256 Page 253
HMLT/HMT
Housed 1"
Deflection Mounting HESL/HES
Pages 259 & 260 Combination Spring
RH
HSL/HS & Neoprene
Neoprene Hanger
Vibration Spring Hanger Pages 263 & 264
Page 266
Pages 261 & 262
BVT
VibraClamp
Tubing Sizes
Page 269
DURA-BLOK™
Pictorial Index
DBR Series
Base & Fixed Height
Roller Assembly
Page 281
DBM Series
Base & Clamp Riser
Page 278 DB__DS Series
Bases & Harness Assembly
Pages 279 & 280
KwikWire™
KwikWire Clamp
Page 286
KwikWire Hanger
Page 288
Wire Rope
KwikPak™ Kit
Page 286
Page 287
SELECTION CHART
for Channels, Materials and Hole Patterns
Material & Thickness* Channel Hole Pattern **
Strut Systems
Information
Channel
Stainless SH S H17/8 TH KO6
Dimensions
Steel
Height Width Steel Alum. Type Type
Channel 304 316
Type
1 2 3 4
Channel Nuts
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B1999
For Copper Tubing & OD Sizes Vibra-Cushion™
O.D. Pipe Clamps • Inhibits Galvanic Reaction
Strut Systems
Catalog Copper & Steel Nominal
Information
No. OD Tubing Size Copper Size • Reduces Sound & Vibration
Part O.D. Size Mat'l
No. (Outside Dia.) Ga. BVT025 1/4" (6.3) -- -- • Used on refrigeration, HVAC, copper
1/4"
BVT037 3/8" (9.5) 1/4" (6) tubing, glass pipes & hydraulic lines
B2023 (6.3) 16
3/8"
BVT050 1/2" (12.7) 3/8" (10) Available in 20 Ft. rolls.
B2024 (9.5) 16 5/8" 1/2"
1/2"
BVT062 (15.9) (15) For Rigid Conduit or Iron Pipe
B2025 (12.7) 16 3/4" 5/8"
5/8"
BVT075 (19.0) (17)
B2026 (15.9) 16 7/8" 3/4"
3/4"
BVT087 (22.2) (20) Nominal Length of Use
B2027 (19.0) 16
7/8"
BVT100 1" (25.4) -- -- Size Vibra-Cushion Clamp No.
B2028 (22.2) 16
BVT112 11/8" (28.6) 1" (25) 3/8" (10) 21/8" (54.0) B2002
B2029 1" (25.4) 14
BVT125 11/4" (31.7) -- -- 1/2" (15) 25/8" (66.7) B2009
B2030 11/8" (28.6) 14
BVT137 13/8" (34.9) 11/4" (32) 3/4" (20) 31/4" (82.5) B2031
B2031 11/4" (31.7) 14
BVT150 11/2" (38.1) -- -- 1" (25) 41/8" (104.8) B2004
B2032 13/8" (34.9) 14
BVT162 15/8" (41.3) 11/2" (40) 11/4" (32) 53/16" (131.8) B2012
B2004 11/2" (38.1) 14
BVT175 13/4" (44.4) -- -- 11/2" (40) 515/16" (150.8) B2038
B2011 15/8" (41.3) 14
BVT187 17/8" (47.6) -- -- 2" (50) 71/2" (190.5) B2042
B2005 13/4" (44.4) 12
BVT200 2" (50.8) -- -- 21/2" (65) 9" (228.6) B2046
B2036 17/8" (47.6) 12
BVT212 21/8" (54.0) 2" (50) 3" (80) 11" (279.4) B2051
B2037 2" (50.8) 12
BVT225 21/4" (57.1) -- -- 31/2" (90) 121/2" (317.5) B2055
B2038 21/8" (54.0) 12
BVT250 21/2" (63.5) -- -- 4" (100) 141/2" (368.3) B2059
B2039 21/4" (57.1) 12
BVT262 25/8" (66.7) 21/2" (65) 5" (125) 177/16" (442.9) B2067
B2013 23/8" (60.3) 12
BVT300 3" (76.2) -- -- 6" (150) 203/4" (527.0) B2116
B2041 21/2" (63.5) 12
BVT312 31/8" (79.4) 3" (80)
B2042 25/8" (66.7) 12 For Thinwall (EMT) Conduit
BVT362 35/8" (92.1) 31/2" (90)
B2043 23/4" (69.8) 12
BVT400 4" (101.6) -- --
B2014 27/8" (73.0) 12 Nominal Length of Use
BVT412 41/8" (104.8) 4" (100)
B2045 3" (76.2) 12 Size Vibra-Cushion Clamp No.
BVT612 61/8" (155.6) 6" (150)
B2046 31/8" (79.4) 12 3/8" (10) 113/16" (46.0) B2027
B2047 31/4" (82.5) 12 Available for tubing and pipe sizes 1/2" (15) 23/16" (58.7) B2002
1/4" to 6", OD sizes 1/4" to 65/8".
B2048 33/8" (85.7) 12 3/4" (20) 27/8" (73.0) B2003
B2015 31/2" (88.9) 12 Easy one tool installation, dampens 1" (25) 35/8" (92.1) B2032
B2050 35/8" (92.1) 11 vibration and noise, secures tubing 11/4" (32) 43/8" (120.6) B2036
B2051 33/4" (95.2) 11 firmly, and protects against galvanic 11/2" (40) 57/16" (138.1) B2012
B2016 4" (101.6) 11 reaction. 2" (50) 67/8" (174.6) B2013
B2054 41/8" (104.8) 11
B2055 41/4" (107.9) 11 Stainless Steel available For Copper Tubing Type L & K
B2056 43/8" (111.1) 11 For Pipe Sizes
Nominal Length of Use
B2017 41/2" (114.3) 11
Size Vibra-Cushion Clamp No.
B2058 45/8" (117.5) 11 Catalog Nominal 1/4"
No. Pipe Size (6) 13/16" (30.2) B2026
B2059 43/4" (120.6) 11 3/8" (10)
BVP025 1/4" (6) 19/16" (39.7) B2027
B2060 47/8" (123.8) 11 1/2" (15)
BVP037 3/8" (10)
17/8" (47.6) B2028
B2061 5" (127.0) 11 5/8" (17)
BVP050 1/2" 25/16" (58.7) B2029
B2062 51/8" (130.2) 11 (15)
3/4" (20)
3/4" 23/4" (69.8) B2030
B2063 51/4" (133.3) 11 BVP075 (20)
BVP100 1" (25)
1" (25) 31/2" (88.9) B2032
B2064 53/8" (136.5) 11
11/4" (32) 45/16" (109.5) B2011
B2065 51/2" (139.7) 11 BVP125 11/4" (32)
11/2" (40) 51/8" (130.2) B2036
BVP150 11/2" (40)
2" (50) 611/16" (169.9) B2013
BVP200 2" (50)
21/2" (65) 81/4" (209.5) B2014
BVP250 21/2" (65)
3" (80) 913/16" (249.2) B2048
BVP300 3" (80)
31/2" (90) 113/8" (288.9) B2052
BVP350 31/2" (90)
4" (100) 1215/16" (328.6) B2056
BVP400 4" (100)
BVP500 5" (125)
5" (125) 61/8" (409.6) B2064
BVP600 6" (150) 6" (150) 191/4" (488.9) B2112
8" (200) 251/2" (647.7) B2128
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Technical Data
DURA-COPPER™ & DURA-GREEN™ EPOXY COATING PROCESS
TANK 1 TANK 2 TANK 3 TANK 4 TANK 5 TANK 6 TANK 7 TANK 8 BAKE OVEN
Parts are Rinse is Phosphatized The material Deionized rinse The electro- The first The final rinse The curing
thoroughly applied to sealer is applied moves through prepares the coating tank post rinse insures a process takes
cleaned and remove to insure clear water metal for the applies a removes any smooth, 20 minutes at a
phosphatized. insoluble salts corrosion resis- rinse to remove cathodic uniform coat of unelectrically nonblemish baking
and unreacted tance and paint excess phos- electro-coating. epoxy paint to attracted finish. temperature of
phosphates. adhesion. phates. the entire solids. 375°F (199°C).
surface.
Elapsed Time
(1) All salt spray (fog) tests conducted in accordance with ASTM B117-73 and evaluated and rated
according to ASTM D1654-79 Tables 1 & 2. Tests were performed and certified by an independent testing laboratory.
General Information
Torque
The torque values in this catalog are to be used as a guide only. The relationship between the applied torque or
torque wrench reading and the actual tension created in the bolt may be substantially different. Important factors
affecting torque-tension relationships include friction under the bolt head or nut, hole tolerances, and torque
wrench tolerances. Accuracy of many commercial torque wrenches may vary as much as plus or minus 25%.
Charts and Tables
Charts and tables in this section are compiled from information published by nationally recognized organizations
and are intended for use as a guide only. B-Line recommends that users of this information determine the validity
of such information as applied to their own applications.
Eaton’s B-Line reserves the right to make specification changes without notice.
1.02 REFERENCES
A. ASTM B633 - Specification for Electrodeposited Coatings of Zinc on Iron and Steel.
B. ASTM A123 - Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products.
C. ASTM A653 - Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron
Alloy-Coated (Galvannealed) by the Hot-Dip Process.
Technical Data
D. ASTM A1011 - Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural,
High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability.
E. ANSI/MSS SP-58 - Manufacturers Standardization Society: Pipe Hangers and Supports -
Materials, Design, and Manufacture.
F. ANSI/MSS SP-69 - Manufacturers Standardization Society: Pipe Hangers and Supports -
Selection and Application.
G. NFPA 13 - Installation of Sprinkler Systems.
1.04 SUBMITTALS
A. Submit product data on all hanger and support devices, including shields and attachment
methods. Product data to include, but not limited to materials, finishes, approvals, load
ratings, and dimensional information.
Part II - PRODUCTS
2.01 ACCEPTABLE MANUFACTURERS
A. Manufacturer: Subject to compliance with these specifications, pipe hanger and support
systems shall be as manufactured by B-Line, Inc.
Technical Data
4. Insulated pipe - Cold or chilled water piping:
a. 5 inch and smaller pipes: use adjustable steel clevis with galvanized sheet metal
shield, B-Line B3100 with B3151 or B3153 series.
b. 6 inch and larger pipes:
i. Adjustable steel yoke pipe, B-Line B3110, with B3380CW - B3384CW
calcium silicate shield.
ii. Pipe roll with sockets, B-Line B3114, with B3380CW - B3384CW calcium
silicate shield.
B. PIPE CLAMPS
1. When flexibility in the hanger assembly is required due to horizontal movement, use
pipe clamps with weldless eye nuts, B-Line B3140 or B3142 with B3200. For insulated
lines use double bolted pipe clamps, B-Line B3144 or B3146 with B3200.
D. WALL SUPPORTS
1. Pipes 4 inch and smaller:
a. Carbon steel hook, B-Line B3191.
b. Carbon steel J-hanger, B-Line B3690.
2. Pipes larger than 4 inch:
a. Welded strut bracket and pipe straps, B-Line B3064 and B2000 series.
b. Welded steel brackets, B-Line B3066 or B3067, with roller chair or adjustable
steel yoke pipe roll. B-Line B3120 or B3110. Use pipe protection shield or
saddles on insulated lines.
E. FLOOR SUPPORTS
1. Hot piping under 6 inch and all cold piping:
a. Carbon steel adjustable pipe saddle and nipple attached to steel base stand sized
for pipe elevation, B-Line B3093 and B3088T or B3090 and B3088. Pipe saddle
shall be screwed or welded to appropriate base stand.
2. Hot piping 6 inch and larger:
a. (Adjustable) Roller stand with base plate, B-Line B3117SL (or B3118SL).
b. Adjustable roller support and steel support sized for elevation, B-Line B3124
F. VERTICAL SUPPORTS
1. Steel riser clamp sized to fit outside diameter of pipe, B-Line B3373.
B. CONCRETE INSERTS
1. Cast in place spot concrete inserts shall be used where applicable, either steel or
malleable iron body, B-Line B2500 or B3014. Spot inserts shall allow for lateral
adjustment and have means for attachment to forms. Select insert nuts to suit
threaded hanger rod sizes, B-Line N2500 or B3014N series.
B. For larger tubing or piping subjected to vibration, use neoprene or spring hangers
Technical Data
as required.
C. For base mounted equipment use vibration pads, molded neoprene mounts, or spring
mounts as required.
2.06 ACCESSORIES
A. Hanger rods shall be threaded both ends, B-Line B3205, or continuous threaded rods
of circular cross section. Use adjusting locknuts at upper attachments and hangers.
No wire, chain, or perforated straps are allowed.
B. Shields shall be 180° galvanized sheet metal, 12 inch minimum length, 18 gauge minimum
thickness, designed to match outside diameter of the insulated pipe, B-Line B3151.
C. Pipe protection saddles shall be formed from carbon steel, 1/8 inch minimum thickness,
sized for insulation thickness. Saddles for pipe sizes greater than 12 inch shall have a
center support rib.
2.07 FINISHES
INDOOR FINISHES
A. Hangers and clamps for support of bare copper piping shall be coated with copper colored
epoxy paint, B-Line DURA-COPPER™. Additionally a plastic coating or a felt lining in
hanger can be used.
B. Hangers for other than bare copper pipe shall be zinc plated in accordance with ASTM
B633 - SC3 or shall have an electro-deposited green epoxy finish, B-Line DURA-GREEN™.
C. Strut channels shall be pre-galvanized in accordance with ASTM A653 G90 or have
an electro-deposited green epoxy finish, B-Line DURA-GREEN.
E. Hangers and strut located in corrosive areas shall be Type 304 (316) stainless steel
with stainless steel hardware.
B. Horizontal steel piping shall be supported in accordance with ANSI/MSS SP-69 & SP-58
Tables 3 and 4, excerpts of which follow below:
2” 3/8” 10’-0”
21/2” 1/2” 11’-0”
3” 1/2” 12’-0”
31/2” 1/2” 13’-0”
4” 5/8” 14’-0”
5” 5/8” 16’-0”
6” 3/4” 17’-0”
8” 3/4” 19’-0”
10” 7/8” 22’-0”
12” 7/8” 23’-0”
14” 1” 25’-0”
16” 1” 27’-0”
C. Horizontal copper tubing shall be supported in accordance with ANSI/MSS SP-69 & SP-58
Tables 3 and 4, excerpts of which follow below:
D. Provide means of preventing dissimilar metal contact such as plastic coated hangers,
copper colored B-Line DURA-COPPER™ epoxy paint, or non-adhesive isolation tape
(B-Line Iso-Pipe™). Galvanized felt isolators sized for copper tubing may also be used,
B-Line B3195CT.
E. Support horizontal cast iron pipe adjacent to each hub, with 10 feet maximum spacing
between hangers.
F. Install hangers to provide a minimum of 1/2 inch space between finished covering and
adjacent work.
I. Where several pipes can be installed in parallel and at the same elevation, provide trapeze
hangers as specified in Section 2.02 C. Trapeze hangers shall be spaced according to the
Technical Data
smallest pipe size, or install intermediate supports according to schedule in Section 3.01 B.
J. Do not support piping from other pipes, ductwork or other equipment which is not
building structure.
B. Provide inserts for suspending hangers from reinforced concrete slabs and sides of
reinforced concrete beams.
C. Where concrete slabs form finished ceilings, provide inserts to be flush with slab surface.
D. For inserts carrying 5” nominal pipe and larger, provide hooked rod to concrete
reinforcement.
Beam clamps offered in this section are designed to provide attachment of hanger rods to structural members without
drilling or welding. A wide range of types and sizes are available for various applications.
Materials
Carbon Steel, Malleable Iron and Forged Steel are used in the manufacturing of beam clamps and accessories. Stainless
steel and other materials are available.
Finishes
The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and Electro-
Galvanized Zinc (ASTM B633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A123), Red Primer, Plastic Coating and
DURA-GREEN™. Other special coatings are available upon request.
Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may
or may not be uniformly coated with special finishes. In some cases, the hanger itself may be coated, however, the
hardware may be supplied Electro-Plated, copper plated, or in stainless steel.
Recommended Set screw Torque (unless otherwise specified)
1/4”-20 3/8”-16 1/2”-13 5/8”-11 3/4”-10
4 ft/lbs (5 Nm) 5 ft/lbs (7 Nm) 11 ft/lbs (15 Nm) 21 ft/lbs (28 Nm) 34 ft/lbs (46 Nm)
Over torqued set screws will damage beam clamps in this section.
We are aware that torque wrenches are not used or not available in many instances. In the absence of a torque wrench, the
set screw should be finger tightened to the I-beam and then an additional 1/4 to 1/2 turn applied to the set screw.
Approvals (as noted)
Items in this section are Underwriters Laboratories Listed, Factory Mutual Approved, and comply with Federal Specification
WW-H-171E & A-A-1192A or Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B351L-3/8 3/8"-16 23/8" (60.3) 23/8" (60.3) 3/4" (19.0) 300 (0.89) 4" (100) 41 (18.6)
B351L-1/2 1/2"-13 23/8" (60.3) 23/8" (60.3) 3/4" (19.0) 380 (1.69) 6" (150) 41 (18.6)
B351L-5/8 5/8"-11 23/8" (60.3) 21/4" (57.1) 3/4" (19.0) 550 (2.44) 6" (150) 60 (27.2)
Beam Clamps
B351L-3/4 3/4"-10 23/8" (60.3) 21/4" (57.1) 3/4" (19.0) 630 (2.80) 6" (150) 71 (32.2)
B351L-7/8 7/8"-9 3" (76.2) 31/4" (82.5) 1" (25.4) 1200 (5.34) -- -- 184 (83.4)
Function: Designed for attaching a hanger rod to the flange of a beam. Locknut Included (19.0)
B3036L-1/2 1/2"-13 13/4" (44.4) 13/4" (44.4) 380 (1.69) 5" (125) 41 (18.6)
B3036L-5/8 5/8"-11 2" (50.8) 17/8" (47.6) 530 (2.36) 6" (150) 60 (27.2)
B3036L-3/4 3/4"-10 2" (50.8) 2" (50.8) 530 (2.36) 6" (150) 71 (32.2)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3362-L B351L-3/8 & 1/2 11/4" (31.7) 7/16" (11.1) 27 (12.2) 35 (15.9) 44 (19.9) 52 (23.6)
B3363-L B351L-5/8 & 3/4, 11/4" (31.7) 5/8" (15.9) 26 (11.8) 35 (15.9) 43 (19.5) 52 (23.6)
Beam Clamps
B3365-L B351L-7/8 11/2" (38.1) 3/4" (19.0) 32 (14.5) 42 (19.0) 52 (23.6) 62 (28.1)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Beam Clamps
Function: For attachment to structural shapes requiring wider throat B
Throat Opening
especially under roof with bar joist construction. 11/4" (31.7) for B3033-3/8 & 1/2
This clamp may be used with the set screw in the up or down position. 15/16" (33.3) for B3033-5/8 & 3/4
A
Approvals: Underwriters Laboratories Listed (cULus) and Factory (Rod Size)
Mutual Engineering Approved (FM). Conforms to Federal Specification Hanger Rod
WW-H-171E Type 19 & A-A-1192A, Type 19 & 23 and Manufacturers Not Included
Standardization Society ANSI/MSS SP-69 & SP-58, Type 19 & 23.
Set Screw and
Finish: Plain. Contact B-Line for alternative finishes and Locknut Included
materials.
Order By: Part number, rod size and finish
Note: Do not over tighten set screw.
B3033-3/8 3/8"-16 21/4" (57.1) 2" (50.8) 11/8" (28.6) 610 (2.71) 610 (2.71) 4" (100) 54 (24.5)
B3033-1/2 1/2"-13 25/16" (58.7) 23/16" (55.6) 11/4" (31.7) 750 (3.33) 1130 (5.02) 8" (200) 51 (23.1)
B3033-5/8 5/8"-11 25/8" (66.7) 21/2" (63.5) 13/8" (34.9) 750 (3.33) 1130 (5.02) 8" (200) 70 (31.7)
B3033-3/4 3/4"-10 211/16" (68.3) 21/2" (63.5) 17/16" (36.5) 750 (3.33) 1130 (5.02) 10" (250) 98 (44.4)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
C
D
B
Throat
Opening
3/4" (19.0) Bottom Flange
A Attachment
(Rod Size) Applications
Hanger Rod
Not Included
Set Screw and
Locknut Included
B3034-3/8 3/8"-16 15/8" (41.3) 2" (50.8) 7/8" (19.0) 610 (2.71) 610 (2.71) 4" (100) 30 (13.6)
B3034-1/2 1/2"-13 113/16" (46.0) 23/16" (55.6) 13/16" (30.2) 750 (3.33) 1130 (5.02) 8" (200) 47 (21.3)
B3034-5/8 5/8"-11 13/4" (44.5) 21/8" (54.0) 11/4" (31.7) 750 (3.33) 1130 (5.02) -- -- 58 (26.3)
B3034-3/4 3/4"-10 2" (50.8) 21/4" (57.2) 11/4" (31.7) 750 (3.33) 1130 (5.02) -- -- 77 (35.0)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Beam Clamps
Factory Mutual Engineering approved only with the set screw in the down position.
(OSHPD). For additional load spacing and placement information relating F C
D
OSHPD projects, please refer to the Seismic Restraint System Guidelines.
Finish: Plain. Contact B-Line for Electro-Galvanized or HDG finishes.
Fig. 68W
Order By: Part number and finish Fig. 68S
A
(Rod Size)
Hanger Rod
Not Included
Fig. 68W
68S-3/8 3/8”-16 19/16” (39.7) 3/4” (19.0) 11/8” (28.6) 7/16” (11.1) 7/8”
(22.2) 610 (2.71) 610 (2.71) 32 (14.5)
68S-1/2 1/2”-13 15/8” (41.3) 3/4” (19.0) 1” (25.4) 7/16” (11.1) 11/8” (28.6) 750 (3.33) 1130 (5.02) 54 (24.5)
68S-5/8 5/8”-11 19/16” (39.7) 3/4” (19.0) 1” (25.4) 9/16” (14.3) 11/8” (28.6) 750 (3.33) 1130 (5.02) 50 (22.7)
68S-3/4 3/4”-10 13/4” (44.4) 3/4” (19.0) 11/8” (28.6) 9/16” (14.3) 11/4” (31.7) 750 (3.33) 1130 (5.02) 81 (36.7)
68S-7/8 7/8”-9 13/4” (44.4) 3/4” (19.0) 11/8” (28.6) 9/16” (14.3) 15/16” (33.3) 750 (3.33) 1130 (5.02) 75 (34.0)
Fig. 68W
C Max Rec. Load Max Rec. Load Approx.
Part Rod Size B Min. D E F Set Screw Up Set Screw Down Wt./100
No. A in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kN) Lbs. (kg)
68W-3/8 3/8”-16 19/16” (39.7) 11/4” (31.7) 11/8” (28.6) 7/16” (11.1) 7/8” (22.2) 610 (2.71) 610 (2.71) 41 (18.6)
68W-1/2 1/2”-13 19/16” (39.7) 11/4” (31.7) 1” (25.4) 5/8” (15.9) 11/8” (28.6) 750 (3.33) 1130 (5.02) 66 (29.9)
68W-5/8 5/8”-11 11/2” (38.1) 11/4” (31.7) 1” (25.4) 9/16” (14.3) 11/8” (28.6) 750 (3.33) 1130 (5.02) 68 (30.8)
68W-3/4 3/4”-10 13/4” (44.4) 11/4” (31.7) 11/8” (28.6) 3/8” (19.5) 11/4” (31.7) 750 (3.33) 1130 (5.02) 110 (49.9)
68W-7/8 7/8”-9 13/4” (44.4) 11/4” (31.7) 11/8” (28.6) 9/16” (14.3) 15/16” (33.3) 750 (3.33) 1130 (5.02) 98 (44.4)
Note: See page 27 for recommended setscrew torque.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Material: Steel with hardened cup point set screw and jam nut
Function: Recommended for hanging from steel beam where flange thickness does
not exceed 3/4” (19.0mm).
Features: All steel construction eliminates structural deficiencies associated with
casting type beam clamps. May be used on top or bottom flange of beam. (Beveled lip B
allows hanging from top flange where clearance is limited.) May be installed with set D
screw in up or down position. Offset design permits unlimited rod adjustment by
allowing the rod to be threaded completely through the clamp. Open design permits E
inspection of thread engagement. C
Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL).
Exceeds requirements of the National Fire Protection Association (NFPA), pamphlet 13,
3/8"-16 rod will support 1/2” (15mm) thru 4” (100mm) pipe F
1/2"-13 rod will support 1/2” (15mm) thru 8” (200mm) pipe A
Included in the Seismic Restraints Catalog approved by the State of California
Office of Statewide Health Planning and Development (OSHPD). For additional
load spacing and placement information relating OSHPD projects, please refer to
Set Screw and
the Seismic Restraint System Guidelines.
Locknut Included
Beam Clamps
11/8"
Fig. 65XT-3/8 - Beam Clamp (28.6)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Beam Clamps
Part Rod Size B C D E
No. A in. (mm) in. (mm) in. (mm) in. (mm)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
C F
Beam Clamps
Fig. 67SS A
67SS-3/8 3/8”-16 1/2" - 4” (15 - 100) 3” (76,2) 7/8” (22.2) 1” (25.4) 15/8” (41.3)
67SS-1/2 1/2”-13 5" - 8” (125 -200) 3” (76,2) 7/8” (22.2) 1” (25.4) 15/8” (41.3)
Fig. 68SS
68SS-3/8 3/8”-16 1/2" - 4” (15 - 100) 21/16” (52.4) 11/8” (28.6) 3/4” (19.0) 11/4” (31.7)
68SS-1/2 1/2”-13 5" - 8” (125 -200) 21/4” (57.1) 11/4” (31.7) 13/16” (20.6) 11/4” (31.7)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B303 1/4”-20 3/8”-16 25/16" (58.7) 11 Ga. (3.0) 400 (1.78) 72 (32.6)
B304 5/16”-18 3/8”-16 25/16" (58.7) 11 Ga. (3.0) 600 (2.67) 72 (32.6)
B305 3/8”-16 3/8”-16 25/16" (58.7) 11 Ga. (3.0) 600 (2.67) 72 (32.6)
B306 3/8”-16 1/2”-13 27/16" (61.9) 7 Ga. (4.5) 1100 (4.89) 97 (44.0)
B307 1/2”-13 1/2”-13 27/16" (61.9) 7 Ga. (4.5) 1100 (4.89) 97 (44.0)
Beam Clamps
B308 1/2”-13 1/2”-13 29/16" (65.1) 1/4" (6.3) 1500 (6.67) 133 (60.3)
B309 5/8”-11 1/2”-13 29/16" (65.1) 1/4" (6.3) 1500 (6.67) 133 (60.3)
B321-1 3/8”-16 1/2”-13 39/16" (92.1) 1/4" (6.3) 1300 (5.78) 187 (84.8)
B321-2 1/2”-13 1/2”-13 39/16" (92.1) 1/4" (6.3) 1400 (6.23) 186 (84.3)
B321-3 5/8”-11 1/2”-13 39/16" (92.1) 1/4" (6.3) 1600 (7.12) 185 (83.9)
B321-4 5/8”-11 5/8”-11 323/32" (94.4) 5/16" (7.9) 1800 (8.00) 239 (108.4)
B321-5 3/4”-10 5/8”-11 323/32" (94.4) 5/16" (7.9) 2000 (8.89) 238 (107.9)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Finish: Pre-Galvanized
Order By: Part number, length (L), and finish.
Note: Minimum return on strap is 1” (25.4mm)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Beam Clamps
clamp. Included in the Seismic Restraints Catalog approved
by the State of California Office of Statewide Health Planning
and Development (OSHPD). For additional load spacing and
placement information relating OSHPD projects, please refer
to the Seismic Restraint System Guidelines.
Finish: Pre-Galvanized
A-A
Order By: Part number, length, and finish.
Note: Minimum return on strap is 1” (25.4mm)
* Patent #5,947,424
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Function: Designed for use with B303-B309 and B321 beam clamps.
1/2"
Finish: Pre-Galvanized 11/4" (12.7)
(31.7)
Order By: Part number and finish. 1/4"
(6.3)
Notes:
Maximum beam thickness 3/4” (19.0).
For thicker beams step up one flange width size.
Requires field forming on beam.
Beam Clamps
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3050-2 1/2"-13 13/8" (34.9) 5/8" (15.9) 21/8" (54.0) 1/4"x 11/4" (6.3 x 31.7) 1000 (3.11)
B3050-5 3/4"-10 17/8" (47.6) 7/8" (22.2) 3" (76.2) 1/2"x 2" (12.7 x 50.8) 3000 (6.67)
Flange Width Flange Thickness Approx. Wt./100 For Beam Clamp Size
'W' Min. Max. 2 5
in. (mm) in. (mm) lbs. (kg) lbs. (kg)
4" (101.6) 3/16" (4.8) 1/2" (12.7) 116 (52.6) 429 (194.6)
Beam Clamps
5" (127.0) 5/16" (7.9) 5/8" (15.9) 125 (56.7) 458 (207.8)
6" (152.4) 1/4" (6.3) 3/4" (19.0) 134 (60.8) 486 (220.5)
7" (177.8) 7/16" (11.1) 7/8" (22.2) 143 (64.9) 514 (233.2)
8" (203.2) 7/16" (11.1) 7/8" (22.2) 152 (69.0) 543 (246.3)
9" (228.6) 9/16" (14.3) 1" (25.4) 160 (72.6) 571 (259.0)
10" (254.0) 5/8" (15.9) 1" (25.4) 169 (76.7) 599 (271.8)
12" (304.8) 5/8" (15.9) 11/4" (31.7) 187 (84.8) 656 (297.6)
B3040-3/8 3/8"-16 23/4" (69.8) 113/16" (46.0) 1/4" x 11/4" (6.3 x 31.7) 300 (1.33) 120 (54.4)
B3040-1/2 1/2"-13 23/4" (69.8) 13/4" (44.4) 1/4" x 11/2" (6.3 x 38.1) 700 (3.11) 160 (72.6)
B3040-5/8 5/8"-11 3" (76.2) 13/4" (44.4) 1/4" x 13/4" (6.3 x 44.4) 1000 (4.45) 216 (98.0)
B3040-3/4 3/4"-10 33/8" (85.7) 17/8" (47.6) 3/8" x 21/2" (9.5 x 63.5) 1800 (8.00) 442 (200.5)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Steel Size
Note:
Steel Size
Box Style
'W' Furnished For
C B3055-3/8 x 2"
Bolt and Nut Included
B B3055-3/8 x 3"
W B3055-3/8 x 4"
B B3055-1/2 x 2"
C Center of cross bolt to
B3055-1/2 x 3"
bottom of side of hanger
rod nut. B3055-1/2 x 4"
B B3055-5/8 x 2"
Beam Clamps
A B3055-5/8 x 3"
(Rod Size) B3055-5/8 x 4"
NOTE: Hanger Rod
Slots on bottom
B3055-3/4 x 2"
Not Included
portions of clamp halves allow B3055-3/4 x 3"
1” (25.4) adjustment for B3055-3/4 x 4"
A variance in flange widths B3055-7/8 x 3"
(Rod Size) B3055-7/8 x 4"
Hanger Rod B3055-7/8 x 5"
Not Included B3055-1 x 3"
B3055-1 x 4"
Rod Size B C Steel Size Design Load B3055-1 x 5"
B3055-1 x 6"
Part No. A in. (mm) in. (mm) in. (mm) Lbs. (kN)
B3055-11/8 x 4"
B3055-3/8 3/8"-16 3" (76.2) 4" (101.6) 1/4" x 11/4" (6.3 x 31.7) 550 (2.44) B3055-11/8 x 5"
B3055-11/8 x 6"
B3055-1/2 1/2"-13 3" (76.2) 4" (101.6) 1/4" x 11/2" (6.3 x 38.1) 850 (3.78) B3055-11/8 x 7"
B3055-11/4 x 4"
B3055-5/8 5/8"-11 31/4" (82.5) 41/2" (114.3) 3/8" x 11/2" (9.5 x 38.1) 1100 (4.89) B3055-11/4 x 5"
B3055-3/4 3/4"-10 31/4" (82.5) 41/2" (114.3) 3/8" x 2" (9.5 x 50.8) 1500 (6.67) B3055-11/4 x 6"
B3055-11/4 x 7"
B3055-7/8 7/8"-9 31/2" (88.9) 5" (127.0) 1/2" x 2" (12.7 x 50.8) 2600 (11.56)
B3055-1 1"-8 31/2" (88.9) 51/2" (139.7) 1/2" x 21/2" (12.7 x 63.5) 4300 (19.12)
Flange Width W Approximate Wt./100 For Beam Clamp Size Lbs. (kg)
3
in. (mm) B3055- /8" B3055-1/2" B3055-5/8" B3055-3/3" B3055-7/8" B3055-1"
4" (101.6) 168 (76.2) 201 (91.2) 328 (148.8) 434 (196.8) 657 (298.0) 797 (361.5)
5" (127.0) 181 (82.1) 217 (98.4) 352 (159.6) 466 (211.4) 667 (302.5) 824 (373.7)
6" (152.4) 193 (87.5) 231 (104.8) 373 (169.2) 495 (224.5) 705 (319.8) 877 (397.8)
7" (177.8) 205 (93.0) 246 (111.6) 395 (179.2) 525 (238.1) 744 (337.5) 926 (420.0)
8" (203.2) 214 (97.1) 256 (116.1) 411 (186.4) 546 (247.6) 773 (350.6) 962 (436.3)
10" (254.0) 235 (106.6) 282 (127.9) 449 (203.6) 596 (270.3) 840 (381.0) 1046 (474.4)
12" (304.8) 259 (117.5) 311 (141.0) 493 (223.6) 655 (297.1) 918 (416.4) 1143 (518.4)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Beam Clamps
B3054WO
B3054-Rod Size
Rod
Size Rod Take Out 'E' For Beam Flange Width Of
Part No. A 3" (76.2) 4" (101.6) 5" (127.0) 6" (152.4) 7" (177.8)
B3054-3/8 3/8"-16 411/16" (119.1) 49/16" (115.9) 45/8" (117.5) 4" (101.6) 31/8" (79.4)
B3054-1/2 1/2"-13 413/16" (122.2) 41/2" (114.3) 45/16" (109.5) 315/16" (100.0) 31/4" (82.5)
B3054-5/8 5/8"-11 47/8" (123.8) 45/8" (117.5) 43/8" (111.1) 33/4" (95.2) 35/16" (84.1)
B3054-3/4 3/4"-10 51/8" (130.2) 5" (127.0) 45/8" (117.5) 41/4" (107.9) 33/4" (95.2)
B3054-7/8 7/8"-9 53/16" (131.8) 47/8" (123.8) 411/16" (119.1) 45/16" (109.5) 33/4" (95.2)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Maximum
Beam Flange Rod Size A
Part No. Thickness (Specify) B C Design Load Approx. Wt./100
*Rod Size In. (mm) * In. (mm) In. (mm) Lbs. (kN) Lbs. (kg)
3/8"-16, 1/2"-13,
B3291-* .60 (15.2) 5/8"-11, 3/4"-10 11/4" (31.7) 11/8" (28.6) 3230 (14.36) 390 (176.9)
B3292-* .60 (15.2) 7/8"-9, 1"-8 111/16" (42.9) 11/8" (28.6) 5900 (26.24) 915 (415.0)
B3293-*∆ .60 (15.2) 3/8"-16, 1/2"-13, 5/8"-11, 111/16" (42.9) 11/8" (28.6) 5900 (26.24) 1300 (589.6)
3/4"-10, 7/8"-9, 1"-8
B3294-* 1.031 (26.2) 7/8"-9, 1"-8 11/2" (38.1) 11/8" (28.6) 5900 (26.24) 2165 (982.0)
B3295-*∆ 1.031 (26.2) 7/8"-9, 1"-8 11/2" (38.1) 11/8" (28.6) 5900 (26.24) 3385 (1535.4)
B3296-* 1.031 (26.2) 1"-8, 11/8"-7, 21/8" (54.0) 11/8" (28.6) 11500 (51.15) 2390 (1084.1)
11/4"-7, 11/2"-6
B3297-*∆ 1.031 (26.2) 11/8"-7, 11/4"-7, 11/2"-6 21/8" (54.0) 11/8" (28.6) 11500 (51.15) 3575 (1621.6)
B3298-* 1.031 (26.2) 13/4"-5, 2"-41/2 49/16" (115.9) 11/8" (28.6) 11500 (51.15) 3675 (1666.9)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Beam Clamps
B3042-1/2 65 (29.5) 86 (39.0) 105 (47.6) 146 (66.2)
Function: Designed for attaching hanger rod to the side of a beam A (Rod Size)
flange. Works on top or bottom of beam. Hanger Rod Not Included
Approvals: Conforms to Federal Specification WW-H-171E &
A-A-1192A, Type 53 and Manufacturers Standardization Society
B
ANSI/MSS SP-69 & SP-58, Type 25.
Finish: Plain or Electro-Galvanized
Order By: Part number, flange width and thickness, and finish.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Beam Clamps
Part Hardware A H W Approx. Wt./100
No. Size in. (mm) in. (mm) in. (mm) Lbs. (kg)
130-6† 1/2”-13 41/2" (114.3) 21/2" (63.5) 37/8" (98.4) 101 (45.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe hangers offered in this section are designed to support insulated or non-insulated pipe allowing for vertical
adjustment and limited movement in the piping system.
Materials
Carbon Steel, Malleable Iron and AISI Type 304 & 316 Stainless Steel are used in the manufacturing of pipe
hangers. Other materials are available.
Finishes
The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black,
Electro-Galvanized Zinc (ASTM B633 SC3), Pre-Galvanized (ASTM A653 G90), Hot-Dip Galvanized After Fabrication
(ASTM A123), Red Primer, Plastic Coating, DURA-GREEN™, DURA-COPPER™ and other special coatings are
available upon request.
Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may or may not
be uniformly coated with special finishes i.e. Hot-Dip Galvanized, DURA-GREEN, DURA-COPPER, PVC etc. In some
cases, the hanger itself may be coated, however, the hardware may be supplied Electro-Plated, DURA-COPPER
Painted or Stainless Steel. Consult B-Line Systems for availability.
Approvals (as noted)
Items in this section are Underwriters Laboratories Listed, Factory Mutual Approved, and comply with Federal
Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58.
Seismic Restraints Catalog approved by the State of California Office of Statewide Health Planning and Development
(OSHPD)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers
1CBS-11/4 11/4” (32) 4.1 (1.8)
1CBS-11/2 11/2” (40) 4.8 (2.2)
1CBS-2 2” (50) 9.4 (4.2)
1CBS-21/2 21/2” (65) 11.4 (5.2)
1CBS-3 3” (75) 13.9 (6.8)
1CBS-31/2 31/2” (90) 16.0 (7.2)
1CBS-4 4” (100) 18.0 (8.1)
1CBS-5 5” (125) 27.3 (12.4)
1CBS-6 6” (150) 32.5 (14.7)
1CBS-8 8” (200) 42.5 (19.2)
1CBS-10 10” (250) 72.7 (32.9)
1CBS-12 12” (300) 86.3 (39.1)
1CBS-14 14” (350) 157.6 (71.5)
1CBS-16 16” (400) 183.7 (83.3)
1CBS-18 18” (450) 224.6 (101.9)
1CBS-20 20” (500) 254.0 (115.2)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3100-1/2 1/2" (15) 3/8"-16 3/8"-16 21/8" (54.0) 13/4" (44.4) 15/16" (23.8)
B3100-3/4 3/4" (20) 3/8"-16 3/8"-16 21/2" (63.5) 2" (50.8) 11/8" (28.6)
Pipe Hangers
B3100-1 1" (25) 3/8"-16 3/8"-16 27/8" (73.0) 21/4" (57.1) 13/8" (34.9)
B3100-11/4 11/4" (32) 3/8"-16 3/8"-16 31/2" (88.9) 211/16" (68.2) 113/16" (46.0)
B3100-11/2 11/2" (40) 3/8"-16 3/8"-16 4" (101.6)` 31/16" (77.8) 21/4" (57.1)
B3100-2 * 2" (50) 3/8"-16 3/8"-16 41/2" (114.3) 35/16" (84.1) 21/2" (63.5)
B3100-21/2 * 21/2" (65) 1/2"-13 3/8"-16 53/8" (136.5) 315/16" (100.0) 31/16" (77.8)
B3100-3 * 3" (80) 1/2"-13 3/8"-16 61/2" (165.1) 43/4" (120.6) 315/16" (100.0)
B3100-31/2 31/2" (90) 1/2"-13 3/8"-16 71/4" (184.1) 51/4" (133.3) 41/16" (103.2)
B3100-4 * 4" (100) 5/8"-11 3/8"-16 73/4" (196.8) 51/2" (139.7) 51/2" (139.7)
B3100-5 * 5" (125) 5/8"-11 1/2"-13 83/4" (222.2) 61/8" (155.6) 6" (152.4)
B3100-6 * 6" (150) 3/4"-10 1/2"-13 105/16" (261.9) 615/16" (176.2) 7" (177.8)
B3100-8 8" (200) 3/4"-10 1/2"-13 123/4" (323.8) 87/16" (214.3) 71/8" (181.0)
B3100-10 10" (250) 7/8"-9 5/8"-11 151/8" (384.2) 93/4" (247.6) 83/8" (212.7)
B3100-12 12" (300) 7/8"-9 5/8"-11 171/2" (444.5) 111/8" (282.6) 911/16" (246.1)
B3100-14 14" (350) 1"-8 -- 193/8" (492.1) 123/8" (314.3) 105/8" (269.9)
B3100-16 16" (400) 1"-8 -- 213/8" (542.9) 133/8" (339.7) 119/16" (293.7)
B3100-18 18" (450) 1"-8 -- 25" (635.0) 16" (406.4) 143/16" (360.3)
B3100-20 20" (500) 11/4"-7 -- 283/4" (730.2) 173/4" (450.8) 165/8" (422.3)
B3100-24 24" (600) 11/4"-7 -- 323/4" (831.8) 193/4" (501.6) 185/8" (473.1)
B3100-30 30" (750) 11/4"-7 -- 3915/16" (1014.4) 2415/16" (633.4) 223/4" (577.8)
B3100-36 36" (900) 11/4"-7 -- 46" (1168.4) 28" (711.2) 25" (635.0)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers
B3100-11/4 21/2" (63.5) 7/8" (22.2) 730 (3.25) 40 (18.1)
B3100-11/2 21/2" (63.5) 13/16" (30.2) 730 (3.25) 42 (19.0)
B3100-2 * 21/2" (63.5) 15/8" (41.3) 730 (3.25) 52 (23.6)
B3100-21/2 * 21/2" (63.5) 2" (50.8) 1350 (6.00) 90 (40.8)
B3100-3 * 21/2" (63.5) 2" (50.8) 1350 (6.00) 110 (49.9)
B3100-31/2 21/2" (63.5) 2" (50.8) 1350 (6.00) 142 (64.4)
B3100-4 * 21/2" (63.5) 2" (50.8) 1430 (6.36) 132 (59.9)
B3100-5 * 21/2" (63.5) 2" (50.8) 1430 (6.36) 215 (97.5)
B3100-6 * 3" (76.2) 2" (50.8) 1940 (8.63) 320 (145.1)
B3100-8 31/2" (88.9) 25/16" (58.7) 2000 (8.89) 485 (220.0)
B3100-10 31/2" (88.9) 25/16" (58.7) 3600 (16.01) 846 (383.7)
B3100-12 31/2" (88.9) 25/8" (66.7) 3800 (16.90) 1083 (491.2)
B3100-14 4" (101.6) 27/8" (73.0) 4200 (18.68) 1432 (649.5)
B3100-16 4" (101.6) 211/16" (68.3) 4600 (20.46) 2200 (997.9)
B3100-18 41/2" (114.3) 315/16" (100.0) 4800 (21.35) 2500 (1134.0)
B3100-20 5" (127.0) 53/8" (136.5) 4800 (21.35) 4400 (1995.8)
B3100-24 5" (127.0) 53/8" (136.5) 4800 (21.35) 5000 (2268.0)
B3100-30 5" (127.0) 61/4" (158.7) 6000 (26.69) 6600 (2993.7)
B3100-36 5" (127.0 57/16" (138.1) 6000 (26.69) 8474 (3843.8)
*SLIDE-RITE™ Clevis Hanger design, as shown above, for sizes 2, 21/2, 3, 4, 5 & 6.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Part No. in. (mm) A in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
B3102-4 4.80 (121.9) 5/8"-11 85/16" (211.1) 513/16" (147.6) 45/8" (117.5) 21/2" (63.5) 2" (50.8) 1430 (6.36) 203 (92.1)
B3102-6 6.90 (175.2) 3/4"-10 105/8" (269.9) 71/16" (179.4) 513/16" (147.6) 3" (76.2) 2" (50.8) 1940 (8.63) 352 (159.6)
B3102-8 9.05 (229.9) 3/4"-10 131/4" (336.5) 85/8" (219.1) 73/16" (182.5) 31/2" (88.9) 21/8" (54.0) 2000 (8.89) 532 (241.3)
B3102-10 11.10 (281.9) 7/8"-9 157/8" (403.2) 101/4" (260.3) 811/16" (220.6) 31/2" (88.9) 21/4" (57.1) 3600 (16.01) 800 (362.9)
B3102-12 13.20 (335.3) 7/8"-9 18" (457.2) 115/16" (287.3) 93/4" (247.6) 31/2" (88.9) 21/4" (57.1) 3800 (16.90) 1152 (522.5)
B3102-14 15.30 (388.6) 1"-8 203/8" (517.5) 125/8" (320.7) 113/16" (281.6) 4" (101.6) 27/8" (73.0) 4200 (18.68) 1449 (657.2)
B3102-16 17.40 (441.9) 1"-8 231/2" (569.9) 1411/16" (373.1) 127/8" (327.0) 4" (101.6) 33/8" (85.7) 4600 (20.46) 2100 (952.6)
B3102-18 19.50 (495.3) 1"-8 255/8" (650.9) 153/4" (400.0) 1315/16" (354.0) 41/2" (114.3) 33/8" (85.7) 4800 (21.35) 2294 (1040.5)
B3102-20 21.60 (548.6) 11/4"-7 291/2" (749.3) 189/16" (471.5) 177/16" (442.9) 5" (127.0) 413/16" (122.2) 4800 (21.35) 3887 (1763.1)
B3102-24 25.80 (655.3) 11/4"-7 33" (838.2) 191/8" (508.0) 20" (485.8) 5" (127.0) 51/4" (133.3) 4800 (21.35) 4844 (2197.2)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers
B3108-4 4" (100) 5/8"-11 1113/16" (300.0) 91/2" (241.3) 83/8" (212.7)
B3108-5 5" (125) 5/8"-11 131/8" (333.4) 105/16" (261.9) 91/8" (231.8)
B3108-6 6" (150) 3/4"-10 143/8" (365.1) 11" (279.5) 911/16" (246.0)
B3108-8 8" (200) 3/4"-10 163/4" (425.4) 123/8" (314.3) 111/8" (282.6)
B3108-10 10" (250) 7/8"-9 191/4" (488.9) 1313/16" (350.8) 125/16" (312.7)
B3108-12 12" (300) 7/8"-9 215/8" (549.3) 153/16" (385.8) 135/8" (346.1)
B3108-3/4 21/2" (63.5) 1/2" (12.7) 2" (50.8) 730 (3.25) 45 (20.4)
B3108-1 21/2" (63.5) 5/8" (15.9) 2" (50.8) 730 (3.25) 49 (22.2)
B3108-11/4 21/2" (63.5) 7/8" (22.2) 2" (50.8) 730 (3.25) 55 (24.9)
B3108-11/2 21/2" (63.5) 13/16" (30.2) 2" (50.8) 730 (3.25) 67 (30.4)
B3108-2 21/2" (63.5) 15/8" (41.3) 4" (101.6) 730 (3.25) 83 (37.6)
B3108-21/2 21/2" (63.5) 2" (50.8) 4" (101.6) 1350 (6.00) 177 (80.3)
B3108-3 21/2" (63.5) 2" (50.8) 4" (101.6) 1350 (6.00) 191 (86.6)
B3108-4 21/2" (63.5) 2" (50.8) 4" (101.6) 1430 (6.36) 237 (107.5)
B3108-5 21/2" (63.5) 2" (50.8) 4" (101.6) 1430 (6.36) 302 (137.0)
B3108-6 3" (76.2) 2" (50.8) 4" (101.6) 1940 (8.63) 397 (180.1)
B3108-8 31/2" (88.9) 25/16" (58.7) 4" (101.6) 2000 (8.89) 582 (264.0)
B3108-10 31/2" (88.9) 25/16" (58.7) 4" (101.6) 3600 (16.01) 968 (439.1)
B3108-12 31/2" (88.9) 25/8" (66.7) 4" (101.6) 3800 (16.90) 1221 (553.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3100-21/2 21/2" (65) 1/2"-13 59/16" (141.3) 4" (101.6) 31/16" (77.8)
B3100-3 3" (80) 1/2"-13 63/4" (171.4) 47/8" (123.8) 315/16" (100.0)
B3100-31/2 1
3 /2" (90) 1/2"-13 7" (177.8) 5" (127.0) 41/16" (103.2)
B3100-4 4" (100) 5/8"-11 713/16" (198.4) 51/2" (139.7) 43/8" (111.1)
B3100-5 5" (125) 5/8"-11 91/16" (230.2) 61/8" (155.6) 5" (127.0)
B3100-6 6" (150) 3/4"-10 107/16" (265.1) 615/16" (176.2) 11
5 /16" (144.5)
B3100-8 8" (200) 3/4"-10 123/4" (323.8) 83/8" (212.7) 71/8" (181.0)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
F
B
Pipe Hangers
B3690F B3690C
B3690-1/2 1/2" (15) 3/8"-16 25/8" (66.7) 13/4" (44.4) 7/16" (11.1) 11/2" (38.1) 115/16" (49.2) 400 (1.78) 18 (8.1)
B3690-3/4 3/4" (20) 3/8"-16 27/8" (73.0) 17/8" (47.6) 7/16" (11.1) 111/16" (42.9) 21/8" (54.0) 400 (1.78) 21 (9.5)
B3690-1 1" (25) 3/8"-16 215/16" (74.6) 115/16" (49.2) 7/16" (11.1) 113/16" (46.0) 25/16" (58.7) 400 (1.78) 22 (10.0)
B3690-11/4 11/4" (32) 3/8"-16 31/4" (82.5) 2" (50.8) 7/16" (11.1) 21/16" (52.4) 25/8" (66.7) 400 (1.78) 25 (11.3)
B3690-11/2 11/2" (40) 3/8"-16 39/16" (90.5) 23/16" (55.6) 7/16" (11.1) 27/16" (61.9) 27/8" (73.0) 400 (1.78) 27 (12.2)
B3690-2 2" (50) 3/8"-16 311/16" (93.7) 21/8" (54.0) 7/16" (11.1) 29/16" (65.1) 31/16" (77.8) 400 (1.78) 29 (13.1)
B3690-21/2 21/2" (65) 1/2"-13 47/16" (112.7) 27/16" (61.9) 9/16" (14.3) 33/16" (81.0) 35/8" (92.1) 500 (2.22) 64 (29.0)
B3690-3 3" (80) 1/2"-13 413/16" (122.2) 29/16" (65.1) 9/16" (14.3) 31/2" (88.9) 41/16" (103.2) 500 (2.22) 72 (32.6)
B3690-31/2 31/2" (90) 1/2"-13 51/8" (130.2) 25/8" (66.7) 9/16" (14.3) 33/4" (95.2) 43/8" (111.1) 500 (2.22) 84 (38.1)
B3690-4 4" (100) 5/8"-11 61/8" (155.6) 33/16" (81.0) 9/16" (14.3) 45/8" (117.5) 53/16" (131.8) 550 (2.44) 138 (62.6)
B3690-5 5" (125) 5/8"-11 63/4" (171.4) 31/4" (82.5) 9/16" (14.3) 51/16" (128.6) 53/4" (146.0) 550 (2.44) 162 (73.5)
B3690-6 6" (150) 3/4"-10 73/4" (196.8) 39/16" (90.5) 9/16" (14.3) 513/16" (147.6) 65/8" (168.3) 600 (2.67) 249 (112.9)
B3690-8 8" (200) 7/8"-9 93/16" (233.4) 315/16" (100.0) 9/16" (14.3) 615/16" (176.2) 8" (203.3) 760 (3.38) 291 (132.0)
B3690-10 10" (250) 7/8"-9 103/4" (273.0) 37/8" (98.4) 9/16" (14.3) 75/8" (193.7) 91/8" (231.8) 760 (3.38) 315 (142.9)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3106-2 1/2" to 2" (15 to 50) 3/8"-16 515/16" (150.8) 41/16" (103.2)
B3106-4 21/2" to 4" (65 to 100) 1/2"-13 93/8" (238.1) 6" (152.4)
Pipe Hangers
B3106V - Plastic Pipe Support Channel (TOLCO Fig. 1VT)
Size Range: 1/2” (15mm) to 4” (100mm) pipe
Material: Steel
TxL
Function: Designed for use with B3106 as a Steel Size
support for plastic or other flexible pipe systems.
Standard Finish: Pre-Galvanized. Contact
B-Line for alternative finishes and
materials. B
Maximum
For Nominal Steel Size Hanger Design Approx.
Pipe Sizes T x L B Spacing Load Wt./100
Part No. in. (mm) in. (mm) in. (mm) Ft. (M) Lbs. (kN) Lbs. (kg)
B3106V-2 1/2" to 2" (15 to 50) 18 Ga. x 96" (1.2 x 2438.4) 19/16" (39.7) 8 (2.44) 150 (.67) 449 (203.6)
B3106V-4 21/2" to 4" (65 to 100) 18 Ga. x 120" (1.2 x 3048.0) 31/8" (79.4) 10 (3.05) 150 (.67) 1123 (509.4)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3104-1/2 13/16" (20.6) 21/2" (63.5) 7/16" (11.1) 150 (.67) 13 (5.9)
B3104-3/4 1" (25.4) 21/2" (63.5) 7/16" (11.1) 250 (1.11) 22 (10.0)
B3104-1 13/8" (34.9) 21/2" (63.5) 9/16" (14.3) 250 (1.11) 24 (10.9)
B3104-11/4 13/4" (44.4) 21/2" (63.5) 13/16" (20.6) 250 (1.11) 29 (13.1)
B3104-11/2 2" (50.8) 21/2" (63.5) 1" (25.4) 250 (1.11) 30 (13.6)
B3104-2 * 215/16" (74.6) 21/2" (63.5) 13/4" (44.4) 250 (1.11) 35 (15.9)
B3104-21/2 37/16" (87.3) 21/2" (63.5) 2" (50.8) 350 (1.55) 82 (37.2)
B3104-3 * 33/4" (95.2) 21/2" (63.5) 2" (50.8) 350 (1.55) 91 (41.3)
B3104-31/2 4" (101.6) 21/2" (63.5) 2" (50.8) 350 (1.55) 98 (44.4)
B3104-4 * 49/16" (115.9) 21/2" (63.5) 23/16" (55.6) 400 (1.78) 132 (59.9)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3104CTC B3104CT
Pipe Hangers
B3104CT-21/2 21/2" (65) 1/2"-13 511/16" (144.5) 41/2" (114.3) 315/16" (100.0)
B3104CT-3 3" (80) 1/2"-13 53/16" (131.8) 35/8" (92.1) 4" (101.6)
B3104CT-31/2 31/2" (90) 1/2"-13 61/2" (165.1) 49/16" (115.9) 41/8" (104.8)
B3104CT-4 4" (100) 1/2"-13 73/8" (187.3) 35/16" (134.9) 43/8" (111.1)
B3104CT-5 5" (125) 1/2"-13 9" (228.6) 67/16" (163.5) 53/4" (146.0)
B3104CT-6 6" (150) 5/8"-11 105/16" (261.9) 71/4" (184.1) 61/2" (165.1)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Fig. 2F
Fig. 2
Nominal Pipe Size Rod Size B C D Max. Rec. Load Approx Wt./100
Pipe Hangers
Part No. in. (mm) A in. (mm) in. (mm) in. (mm) lbs. (kN) lbs. (kg)
2-21/2 21/2" (65) 1/2"-13* 53/4" (146.0) 41/4" (107.9) 15/8" (41.3) 600 (2.67) 41 (18.6)
2-3 3" (75) 1/2"-13* 6" (152.4) 41/8" (104.8) 11/4" (31.7) 600 (2.67) 45 (20.4)
2-31/2 31/2" (90) 1/2"-13 * 73/8" (187.3) 51/4" (133.3) 21/8" (54.0) 600 (2.67) 52 (23.6)
2-4 4" (100) 5/8"-11 * 73/8" (187.3) 5" (127.0) 15/8" (41.3) 1000 (4.45) 59 (27.6)
2-5 5" (125) 5/8"-11 ** 9" (228.6) 61/8" (155.6) 21/4" (57.1) 1250 (5.56) 97 (44.0)
2-6 6" (150) 3/4"-10 ** 93/8" (238.1) 61/2" (165.1) 17/8" (47.6) 1250 (5.56) 139 (63.0)
Fig. 2F
Nominal Pipe Size Rod Size B C D Max. Rec. Load Approx Wt./100
Part No. in. (mm) A in. (mm) in. (mm) in. (mm) lbs. (kN) lbs. (kg)
2F-21/2 21/2" (65) 1/2"-13* 53/4" (146.0) 41/4" (107.9) 15/8" (41.3) 600 (2.67) 41 (18.6)
2F-3 3" (75) 1/2"-13* 6" (152.4) 41/8" (104.8) 11/4" (31.7) 600 (2.67) 45 (20.4)
2F-31/2 31/2" (90) 1/2"-13 * 73/8" (187.3) 51/4" (133.3) 21/8" (54.0) 600 (2.67) 52 (23.6)
2F-4 4" (100) 5/8"-11 * 73/8" (187.3) 5" (127.0) 15/8" (41.3) 1000 (4.45) 59 (27.6)
2F-5 5" (125) 5/8"-11 ** 9" (228.6) 61/8" (155.6) 21/4" (57.1) 1250 (5.56) 97 (44.0)
2F-6 6" (150) 3/4"-10 ** 93/8" (238.1) 61/2" (165.1) 17/8" (47.6) 1250 (5.56) 139 (63.0)
* 3/8 nut is used when requested. ** 1/2 nut is used when requested.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3170CT-1/2 1/2" (15) 3/8"-16 21/16" (52.4) 11/8" (28.6) 31/32" (24.6)
B3170CT-3/4 3/4" (20) 3/8"-16 25/16" (58.7) 15/16" (33.3) 11/32" (26.2)
B3170CT-1 1" (25) 3/8"-16 21/2" (63.5) 19/16" (39.7) 15/32" (29.3)
B3170CT-11/4 11/4" (32) 3/8"-16 21/2" (63.5) 19/16" (39.7) 1" (25.4)
B3170CT-11/2 11/2" (40) 3/8"-16 215/16" (74.6) 2" (50.8) 15/16" (33.3)
B3170CT-2 2" (50) 3/8"-16 31/8" (79.4) 21/8" (54.0) 13/16" (30.2)
B3170CT-21/2 21/2" (65) 1/2"-13 41/16" (103.2) 29/16" (65.1) 13/8" (34.9)
B3170CT-3 3" (75) 1/2"-13 315/16" (100.0) 33/4" (95.2) 11/4" (31.7)
B3170CT-31/2 31/2" (90) 1/2"-13 47/16" (112.7) 31/4" (82.5) 11/2" (38.1)
Pipe Hangers
B3170CT-4 4" (100) 1/2"-13 411/16" (119.1) 39/16" (89.6) 19/16" (39.7)
B3170CT-5 5" (125) 1/2"-13 515/16" (150.8) 45/16" (109.5) 125/32" (45.2)
B3170CT-6 6" (150) 1/2"-13 611/16" (169.9) 53/16" (131.8) 21/8" (54.0)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
200-1/2 1/2" (15) 3/8"-16 M8 or M10 31/8" (79.4) 25/8" (66.7) 400 (1.78) 11 (5.0)
200-3/4 3/4" (20) 3/8"-16 M8 or M10 31/8" (79.4) 21/2" (63.5) 400 (1.78) 11 (5.0)
200-1 1" (25) 3/8"-16 M8 or M10 33/8" (85.7) 25/8" (66.7) 400 (1.78) 12 (5.5)
200-11/4 11/4" (32) 3/8"-16 M8 or M10 33/4" (94.0) 27/8" (73.0) 400 (1.78) 13 (5.9)
200-11/2 11/2" (40) 3/8"-16 M8 or M10 37/8" (98.4) 27/8" (73.0) 400 (1.78) 14 (6.4)
200-2 2" (50) 3/8"-16 M8 or M10 41/2" (114.3) 3" (76.3) 400 (1.78) 15 (6.9)
200-21/2 21/2" (65) 3/8"-16 M10 55/8" (142.9) 41/8" (104.7) 600 (2.67) 27 (12.3)
200-3 3" (75) 3/8"-16 M10 57/8" (149.1) 4" (101.6) 600 (2.67) 29 (13.3)
200-31/2 1
3 /2" (90) 3/8"-16 M10 73/8" (187.3) 1
5 /4" (133.3) 600 (2.67) 34 (15.6)
200-4 4" (100) 3/8"-16 M10 73/8" (187.3) 5" (127.0) 1000 (4.45) 35 (16.0)
200-5 5" (125) 1/2"-13 M12 91/8" (231.8) 61/4" (158.7) 1250 (5.56) 66 (30.2)
200-6 6" (150) 1/2"-13 M12 101/8" (257.2) 63/4" (171.4) 1250 (5.56) 73 (33.4)
200-8 8" (200) 1/2"-13 M12 131/8" (333.4) 83/4" (222.2) 1250 (5.56) 136 (62.3)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers
Pipe Size Rod Size A B Max. Rec. Load Approx. Wt./100
Part No. in. (mm) in. (mm) in. (mm) lbs. (kN) lbs. (kg)
200H-2-3/8 2" (50) 3/8"-16 49/16" (115.9) 37/32" (81.7) 1200 (5.34) 48 (21.8)
200H-2-1/2 2" (50) 1/2"-13 423/32" (119.8) 33/8" (85.7) 1200 (5.34) 45 (20.4)
200H-21/2-3/8 1
2 /2" (65) 3/8"-16 55/16" (134.9) 323/32" (94.4) 1200 (5.34) 59 (26.7)
200H-21/2-1/2 21/2" (65) 1/2"-13 515/32" (138.9) 37/8" (98.3) 1200 (5.34) 56 (25.4)
200H-3-3/8 3" (75) 3/8"-16 53/4" (146.0) 327/32" (97.6) 1200 (5.34) 63 (28.6)
200H-3-1/2 3" (75) 1/2"-13 57/8" (148.1) 331/32" (100.8) 1200 (5.34) 60 (27.2)
200H-4-3/8 4" (100) 3/8"-16 67/8" (174.6) 47/16" (112.7) 1200 (5.34) 76 (34.5)
200H-4-1/2 4" (100) 1/2"-13 71/32" (178.6) 419/32" (1116.7) 1200 (5.34) 73 (33.1)
* Select trapeze pipe size based on section modulus required for span of trapeze per information provided in
NFPA 13 (2002) Table 9.1.1.6.1 (a and b).
** All sizes are UL Listed to support up to 8" pipe at max spacing per NFPA 13.
For 6” (150mm) and 8” (200mm) trapeze pipe, consult factory.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
A
B3198R - Extension Split Pipe Clamp (Thread Size)
Hanger Rod Not
Size Range: 3/8” (10mm) to 4” (100mm) pipe C Included
Pipe Hangers
Rod
Part No. Pipe Size Thread Size C Design Load Approx. Wt./100
Rod Thread in. (mm) A in. (mm) Lbs. (kN) Lbs. (kg)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers
Hanger Rod
Material: Malleable Iron C Not Included
Function: A rigid support to suspend tubing horizontally or
vertically.
Approvals: Conforms to Federal Specification WW-H-171E
& A-A-1192A, Type 25 and Manufacturers Standardization
Society ANSI/MSS SP-69 & SP-58, Type 12.
Standard Finish: DURA-COPPER™
Order By: Part number and finish.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3175-1/2 1/2" (15) 11/16" (27.0) 1/4"-20 18 Ga. x 7/8" (1.2 x 22.2) 275 (1.22) 7.5 (3.4)
B3175-3/4 3/4" (20) 13/16" (30.2) 1/4"-20 18 Ga. x 7/8" (1.2 x 22.2) 275 (1.22) 8.0 (3.6)
B3175-1 1" (25) 15/16" (33.3) 1/4"-20 18 Ga. x 7/8" (1.2 x 22.2) 275 (1.22) 9.0 (4.1)
B3175-11/4 11/4" (32) 11/2" (38.1) 1/4"-20 18 Ga. x 7/8" (1.2 x 22.2) 275 (1.22) 10.5 (4.7)
B3175-11/2 11/2" (40) 15/8" (41.3) 1/4"-20 18 Ga. x 7/8" (1.2 x 22.2) 275 (1.22) 11.5 (5.2)
B3175-2 2" (50) 113/16" (46.0) 1/4"-20 18 Ga. x 7/8" (1.2 x 22.2) 275 (1.22) 13.0 (5.9)
B3175-21/2 21/2" (65) 25/16" (58.7) 5/16"-18 16 Ga. x 11/4" (1.5 x 31.7) 500 (2.22) 30.0 (13.6)
B3175-3 3" (80) 25/8" (66.7) 5/16"-18 16 Ga. x 11/4" (1.5 x 31.7) 500 (2.22) 35.0 (15.9)
B3175-31/2 31/2" (90) 27/8" (73.0) 5/16"-18 16 Ga. x 11/4" (1.5 x 31.7) 500 (2.22) 38.5 (17.4)
B3175-4 4" (100) 31/8" (79.4) 5/16"-18 16 Ga. x 11/4" (1.5 x 31.7) 500 (2.22) 42.0 (19.0)
B3175-5 5" (125) 35/8" (92.1) 5/16"-18 16 Ga. x 11/4" (1.5 x 31.7) 500 (2.22) 51.0 (23.1)
B3175-6 6" (150) 43/16" (106.4) 5/16"-18 16 Ga. x 11/4" (1.5 x 31.7) 500 (2.22) 58.5 (26.5)
Bolt Size
Size Range: 1/2” (15mm) to 4” (100mm) pipe
Material: Pre-Galvanized Steel Steel Size
B3175CT-1/2 1/2" (15) 15/16" (33.3) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 8 (3.6)
B3175CT-3/4 3/4" (20) 13/8" (34.9) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 8 (3.6)
B3175CT-1 1" (25) 13/16" (30.2) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 8 (3.6)
B3175CT-11/4 11/4" (32) 15/16" (33.3) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 10 (4.5)
B3175CT-11/2 11/2" (40) 11/2" (38.1) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 11 (5.0)
B3175CT-2 2" (50) 115/16" (49.2) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 11 (5.0)
B3175CT-21/2 21/2" (65) 23/16" (55.6) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 12 (5.4)
B3175CT-3 3" (80) 211/16" (68.3) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 14 (6.3)
B3175CT-31/2 31/2" (90) 215/16" (74.6) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 16 (7.2)
B3175CT-4 4" (100) 33/16" (81.0) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 18 (8.1)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers
Size Range: 1/2” (15mm) to 8” (200mm) pipe
Material: Steel (Stainless steel available)
Function: Recommended for supporting light pipe runs flush with the mounting surfaces.
Standard Finish: Plain or Electro-Galvanized. Contact B-Line for alternative finishes and materials.
Order By: Part number and finish.
9/16" Dia.
Pipe Size Design Load Approx. Wt./100 (14.3)
Part No. in. (mm) Lbs. (kN) Lbs. (kg)
B3191-1/2 1/2" (15) 200 (.89) 54 (24.5)
B3191-3/4 3/4" (20) 200 (.89) 55 (24.9)
B3191-1 1" (25) 200 (.89) 76 (34.5) 5"
(127.0)
B3191-11/4 11/4" (32) 200 (.89) 82 (37.2)
B3191-11/2 11/2" (40) 200 (.89) 87 (39.4)
B3191-2 2" (50) 200 (.89) 96 (43.5)
B3191-21/2 21/2" (65) 350 (1.55) 124 (56.2)
B3191-3 3" (80) 350 (1.55) 134 (60.8)
B3191-31/2 31/2" (90) 350 (1.55) 145 (65.8)
B3191-4 4" (100) 450 (2.00) 153 (69.4)
B3191-5 5" (125) 450 (2.00) 348 (157.8)
B3191-6 6" (150) 450 (2.00) 381 (172.8)
B3191-8 8" (200) 450 (2.00) 600 (272.1)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers
Pipe Size A Fastener Size Max. Rec. Load***
Part No. in. (mm) in. (mm) lbs. (kN)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Length
(Specify)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
A
(Rod Size)
Pipe Hangers
Spring Deflection Rated Load Approx. Wt./100
Part No. In (mm) Lbs. (kN) Lbs. (kg)
B3262-3/8 1.20 (30.1) 100-150 (.44 - .67) 390 (176.2)
B3262-1/2 1.10 (27.7) 150-250 (.67 - 1.11) 410 (186.0)
B3262-5/8 1.00 (25.4) 350-450 (1.56 - 2.00) 470 (213.2)
B3262-3/4 1.20 (30.1) 600-750 (2.67 - 3.34) 1240 (562.6)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Approx. Wt./100
Part No. Flange Thickness Maximum Load BH-2-12 BH-2-12R
Parallel Right Angle In. (mm) Lbs. (kN) Lbs. (kg) Lbs. (kg)
BH-2-4 BH-2-4-R 1/8" to 1/4" (3.2 to 6.3) 200 (.89) 4.5 (2.0) 6.0 (2.7)
BH-5-8 BH-5-8-R 5/16" to 1/2" (7.9 to 12.7) 200 (.89) 5.0 (2.3) 6.5 (2.9)
BH-9-12 BH-9-12-R 9/16" to 3/4" (14.3 to 19.0) 200 (.89) 5.5 (2.5) 7.0 (3.2)
BL1400 - Hanger W
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe clamps offered in this section are designed for support and attachment of pipe to structural members. A wide
range of pipe clamps are available for various applications.
Materials
Pipe Clamps
Carbon Steel is used in the manufacturing of riser and pipe clamps. Stainless Steel and other materials are available.
Finishes
The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and Electro-
Galvanized Zinc (ASTM B633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A123), Red Primer, Plastic Coating,
DURA-GREEN™, DURA-COPPER™ and other special coatings are available upon request.
Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may or may not be
uniformly coated with special finishes. In some cases, the hanger itself may be coated, however, the hardware may
be supplied Electro-Plated, Copper Plated, or in Stainless Steel.
Recommended Torque (Pipe Clamp Hardware)
1/4”-20 5/16”-18 3/8”-16 1/2”-13 5/8”-11 3/4”-10 & larger
6 ft/lbs (8 Nm) 11 ft/lbs (19 Nm) 19 ft/lbs (26 Nm) 50 ft/lbs (68 Nm) 65 ft/lbs (88 Nm) 75 ft/lbs (101 Nm)
Approvals (as noted)
Items in this section are Underwriters Laboratories Listed, Factory Mutual Approved, and comply with Federal
Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58.
All pipe hangers and supports in this section are sized to fit schedule 40/80 pipe unless otherwise noted. Some steel
items may be specially fabricated to fit other pipe diameters i.e. ductile iron, cast iron, etc. Select pipe O.D. from
charts on pages 294 thru 300.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3373C B3373F
B3373-1/2 1/2" (15) 9" (228.6) 3/8"-16 x 11/4" 255 (1.13) 101 (45.9)
Notes: For ductile iron
B3373-3/4 3/4" (20) 91/4" (234.9) 3/8"-16 x 11/4" 255 (1.13) 105 (47.7)
(D.I.) pipe use part
B3373-1 1" (25) 99/16" (242.9) 3/8"-16 x 11/4" 255 (1.13) 109 (49.4) number B3373DI-pipe
B3373-11/4 11/4" (32) 10" (254.0) 3/8"-16 x 11/4" 255 (1.13) 112 (50.9) size. Contact B-Line
Engineering for more
B3373-11/2 11/2" (40) 101/4" (260.3) 3/8"-16 x 11/2" 255 (1.13) 113 (51.1)
information.
B3373-2 2" (50) 103/4" (273.0) 3/8"-16 x 11/2" 255 (1.13) 165 (75.0)
Pipe Clamps
B3373-21/2 21/2" (65) 111/4" (285.7) 3/8"-16 x 11/2" 390 (1.73) 180 (81.6)
B3373-3 3" (80) 1115/16" (303.2) 3/8"-16 x 11/2" 530 (2.35) 195 (88.4)
B3373-31/2 31/2" (90) 123/8" (314.3) 1/2"-13 x 13/4" 670 (2.98) 217 (98.5)
B3373-4 4" (100) 127/8" (327.0) 1/2"-13 x 13/4" 810 (3.60) 228 (103.5)
B3373-5 5" (125) 14" (355.6) 1/2"-13 x 13/4" 1160 (5.16) 480 (217.7)
B3373-6 6" (150) 153/16" (385.8) 1/2"-13 x 2" 1570 (6.98) 526 (238.6)
B3373-8 8" (200) 173/4" (450.8) 5/8"-11 x 21/2" 2500 (11.12) 957 (434.1)
B3373-10 10" (250) 197/16" (493.7) 5/8"-11 x 21/2" 2500 (11.12) 1101 (499.4)
B3373-12 12" (300) 2111/16" (550.9) 5/8"-11 x 3" 2700 (12.01) 1622 (735.7)
B3373-14 14" (350) 239/16" (598.5) 5/8"-11 x 3" 2700 (12.01) 1732 (785.6)
B3373-16 16" (400) 263/8" (669.9) 3/4"-10 x 31/4" 2900 (12.90) 2959 (1342.2)
B3373-18 18" (450) 287/8" (733.4) 3/4"-10 x 31/4" 2900 (12.90) 3235 (1467.4)
B3373-20 20" (500) 307/8" (784.2) 3/4"-10 x 31/2" 2900 (12.90) 3568 (1618.4)
B3373-24 24" (600) 347/8" (885.8) 3/4"-10 x 31/2" 2900 (12.90) 4064 (1843.3)
B3373-30 30" (750) 403/4" (1035.0) 7/8"-9 x 31/2" 2900 (12.90) 6016 (2728.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3373CT B3373CTC
B3373CT-6 6" (150) 145/8" (371.5) 1/2"-13 x 2" 500 (2.22) 386 (175.1)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3132-4 4" (100) 127/8" (327.0) 93/4" (247.6) 5" (127.0) 1/2" x 2" (12.7 x 50.8) 5/8"-11 x 3" 864 (391.9)
B3132-6 6" (150) 143/4" (374.6) 12" (304.8) 71/16" (179.4) 1/2" x 2" (12.7 x 50.8) 5/8"-11 x 3" 1020 (462.6)
B3132-8 8" (200) 171/4" (438.1) 141/4" (361.9) 93/16" (233.4) 1/2" x 2" (12.7 x 50.8) 5/8"-11 x 3" 1222 (554.3)
B3132-10 10" (250) 193/8" (492.1) 161/2" (419.1) 113/8" (288.9) 1/2" x 2" (12.7 x 50.8) 5/8"-11 x 3" 1409 (639.1)
B3132-12 12" (300) 217/8" (555.6) 187/8" (479.4) 131/2" (342.9) 1/2" x 2" (12.7 x 50.8) 5/8"-11 x 3" 1608 (729.4)
B3132-14 14" (350) 26" (660.4) 221/4" (565.1) 153/4" (400.0) 3/4" x 3" (19.0 x 76.2) 7/8"-9 x 41/2" 4359 (1977.2)
B3132-16 16" (400) 283/8" (720.7) 245/8" (625.5) 177/8" (454.0) 3/4" x 4" (19.0 x 101.6) 1"-8 x 41/2" 6403 (2904.4)
B3132-18 18" (450) 313/8" (796.9) 275/8" (701.7) 20" (508.0) 3/4" x 4" (19.0 x 101.6) 11/4"-7 x 5" 7293 (3308.1)
B3132-20 20" (500) 331/2" (850.9) 293/4" (755.6) 221/8" (562.0) 3/4" x 41/2" (19.0 x 114.3) 11/4"-7 x 5" 8778 (3981.7)
B3132-24 24" (600) 39" (990.6) 351/4" (895.3) 263/8" (669.9) 3/4" x 5" (19.0 x 127.0) 11/4"-6 x 51/2" 11659 (5288.5)
Pipe Clamps
Function: Used with B3132 to secure tie rods. The projecting F
lug bears against the clamp bolt to prevent washer and tie rod H H
from slipping off clamp.
G B3132W-1 G
Finish: Plain. Contact B-Line for alternative finishes and B3132W-3/4
thru 11/2
materials.
Order By: Part number, rod size and finish
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3134-4 4.80" (121.9) 141/16" (357.2) 95/16" (236.5) 5/8"-11 B3134W-3/4 1275 (578.3)
B3134-6 6.90" (175.3) 167/16" (417.5) 1111/16" (298.9) 5/8"-11 B3134W-3/4 1455 (660.0)
B3134-8 9.05" (229.9) 195/8" (498.5) 147/8" (442.6) 5/8"-11 B3134W-3/4 2350 (1065.9)
B3134-10 11.10" (281.9) 2113/16" (554.0) 171/16" (433.4) 3/4"-10 B3134W-3/4 2925 (1326.8)
B3134-12 13.20" (335.3) 241/2" (622.3) 191/4" (488.9) 7/8"-9 B3134W-1 4030 (1828.0)
B3134-14 15.30" (388.6) 2615/16" (684.2) 2111/16" (550.9) 7/8"-9 B3134W-1 5385 (2442.6)
B3134-16 17.40" (441.9) 303/4" (781.0) 243/4" (628.6) 1"-8 B3134W-11/8 7645 (3467.8)
B3134-18 19.50" (495.3) 345/16" (871.5) 275/16" (693.7) 11/4"-7 B3134W-11/4 9425 (4275.2)
B3134-20 21.60" (548.6) 365/8" (930.3) 295/8" (752.5) 11/4"-7 B3134W-11/2 10975 (4978.2)
B3134-24 25.80" (655.3) 421/8" (1070.0) 343/8" (873.1) 11/2"-6 B3134W-11/2 14865 (6742.6)
B3134W-3/4 3/4"-10 3" (76.2) 1/2" (12.7) 7/8" (22.2) 120 (54.4)
B3134W-1 1"-8 1
3 /2" (88.9) 1/2" (12.7) 11/8" (28.6) 157 (71.2)
B3134W-11/8 11/8"-7 31/2" (88.9) 5/8" (15.9) 11/4" (31.7) 194 (88.0)
B3134W-11/4 11/4"-7 31/2" (88.9) 3/4" (19.0) 13/8" (35.8) 230 (104.3)
B3134W-11/2 11/2"-6 31/2" (88.9) 3/4" (19.0) 15/8" (41.2) 240 (108.8˛)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Clamps
(UL Listed Up to 4” (100MM) IPS)
4A-4 4" (100) 81/2" (215.9) 9/16" (14.3) 33/8" (85.7) 311/16" (93.7) 1/2"-13 2015 (8.96) 221 (100.2)
4A-5 5" (125) 93/4" (247.6) 9/16" (14.3) 37/8" (98.4) 43/8" (111.1) 1/2"-13 2015 (8.96) 253 (114.7)
4A-6 6" (150) 111/2" (292.1) 5/8" (15.9) 5" (127.0) 51/8" (130.2) 1/2"-13 2015 (8.96) 513 (232.7)
4A-8 8" (200) 131/4" (336.5) 3/4" (19.0) 611/16" (169.9) 61/8" (155.6) 1/2"-13 2015 (8.96) 601 (272.6)
Eaton’s B-Line Business seismic bracing components are designed to be compatible only with other B-Line bracing components,
resulting in a listed seismic bracing assembly. B-Line’s warranty for seismic bracing components will be the warranty provided in
B-Line’s standard terms and conditions of sale made available by B-Line, except that, in addition to the other exclusions from
B-Line’s warranty, Eaton’s B-line Business makes no warranty relating to B-Line’s seismic bracing components that are combined
with products not provided by Eaton’s B-Line Business.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3140
B3140F
B3140C
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3140-3/4 3/4" (20) 9/16" (14.3) 13/32" (27.8) 121/32" (42.0) 5/16"-18
B3140-1 1" (25) 9/16" (14.3) 15/16" (33.3) 17/8" (47.6) 5/16"-18
B3140-11/4 11/4" (32) 17/32" (13.5) 17/16" (36.5) 2" (50.8) 5/16"-18
B3140-2 2" (50) 9/16" (14.3) 21/8" (54.0) 23/4" (69.8) 1/2"-13
B3140-21/2 21/2" (65) 5/8" (15.9) 221/32" (67.5) 39/32" (83.3) 1/2"-13
B3140-3 3" (75) 5/8" (15.9) 215/16" (74.6) 39/16" (90.5) 1/2"-13
B3140-31/2 1
3 /2" (90) 5/8" (15.9) 35/32" (80.1) 325/32" (96.0) 1/2"-13
B3140-4 4" (100) 3/4" (19.0) 39/16" (90.5) 45/16" (109.5) 5/8"-11
B3140-5 5" (125) 3/4" (19.0) 41/8" (104.8) 47/8" (123.8) 5/8"-11
B3140-6 6" (150) 7/8" (22.2) 415/16" (125.4) 513/16" (147.6) 3/4"-10
B3140-8 8" (200) 1" (25.4) 61/16" (154.0) 615/16" (176.2) 3/4"-10
B3140-10 10" (250) 1" (25.4) 73/8" (187.3) 811/16" (220.7) 7/8"-9
B3140-12 12" (300) 1" (25.4) 87/16" (214.3) 93/4" (247.6) 7/8"-9
B3140-14 14" (350) 11/8" (28.6) 91/4" (234.9) 105/8" (269.9) 7/8"-9
B3140-16 16" (400) 11/8" (28.6) 101/4" (260.3) 115/8" (295.3) 7/8"-9
B3140-18 18" (450) 11/4" (31.7) 117/8" (301.6) 131/4" (336.5) 1"-8
B3140-20 20" (500) 13/8" (34.9) 123/4" (323.8) 141/8" (358.8) 11/8"-7
B3140-24 24" (600) 15/8" (41.3) 151/4" (387.3) 167/8" (428.6) 11/4"-7
B3140-30 30" (750) 21/4" (57.1) 185/8" (473.1) 21" (533.4) 11/2"-6
Pipe Clamps
B3140-11/2 11/2" (40) 800 (3.56) 620 (2.76) 41 (18.6)
B3140-2 2" (50) 1040 (4.62) 810 (3.60) 118 (53.5)
B3140-21/2 1
2 /2" (65) 1040 (4.62) 810 (3.60) 130 (58.9)
B3140-3 3" (75) 1040 (4.62) 810 (3.60) 150 (68.0)
B3140-31/2 31/2" (90) 1040 (4.62) 810 (3.60) 158 (71.6)
B3140-4 4" (100) 1040 (4.62) 810 (3.60) 239 (108.4)
B3140-5 5" (125) 1040 (4.62) 810 (3.60) 272 (123.4)
B3140-6 6" (150) 1615 (7.18) 1260 (5.60) 541 (245.4)
B3140-8 8" (200) 1615 (7.18) 1260 (5.60) 642 (291.2)
B3140-10 10" (250) 2490 (11.07) 1950 (8.67) 1366 (619.6)
B3140-12 12" (300) 2490 (11.07) 1950 (8.67) 1543 (699.9)
B3140-14 14" (350) 2490 (11.07) 1950 (8.67) 2077 (942.1)
B3140-16 16" (400) 2490 (11.07) 1950 (8.67) 2289 (1038.3)
B3140-18 18" (450) 3060 (13.61) 2390 (10.63) 3206 (1454.2)
B3140-20 20" (500) 3060 (13.61) 2390 (10.63) 3616 (1640.2)
B3140-24 24" (600) 3060 (13.61) 2390 (10.63) 5161 (2341.0)
B3140-30 30" (750) 3500 (15.57) 2740 (12.14) 10460 (4744.6)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3141-4 4.80" (121.9) 11/8" (28.6) 41/16" (103.2) 5/8"-11 1400 (6.23) 860 (390.1)
B3141-6 6.90" (175.2) 11/8" (28.6) 51/16" (128.6) 5/8"-11 1400 (6.23) 1060 (480.8)
B3141-8 9.05" (229.9) 11/8" (28.6) 63/16" (157.2) 5/8"-11 1400 (6.23) 1230 (557.9)
B3141-10 11.10" (281.9) 11/8" (28.6) 71/4" (184.1) 5/8"-11 1400 (6.23) 1430 (648.6)
B3141-12 13.20” (335.3) 11/8" (28.6) 85/16" (211.1) 5/8"-11 1400 (6.23) 1630 (739.3)
B3141-14 15.30" (388.6) 13/4" (44.4) 97/8" (250.7) 3/4"-10 2000 (8.89) 2300 (1043.3)
B3141-16 17.40" (441.9) 13/4" (44.4) 115/16" (287.3) 7/8"-9 2500 (11.12) 3725 (1689.6)
B3141-18 19.50" (495.3) 17/8" (47.6) 129/16" (319.1) 1"-8 3000 (13.34) 4200 (1905.1)
B3141-20 21.60" (548.6) 2" (50.8) 135/8" (346.1) 1"-8 3100 (13.79) 4575 (2075.2)
B3141-24 25.80" (655.3) 2" (50.8) 165/16" (414.3) 1/4"-7 4500 (20.01) 6400 (2903.0)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3142-3 3" (80) 1" (25.4) 3" (76.2) 41/8" (104.8) 3/4"-10 3370 (14.99) 3005 (13.36) 498 (225.9)
Pipe Clamps
B3142-4 4" (100) 1" (25.4) 311/16" (93.7) 415/16" (125.4) 7/8"-9 3515 (15.63) 3135 (13.94) 634 (287.6)
B3142-5 5" (125) 1" (25.4) 45/16" (109.5) 59/16" (141.3) 7/8"-9 3515 (15.63) 3135 (13.94) 714 (323.9)
B3142-6 6" (150) 11/8" (28.6) 53/16" (131.8) 611/16" (169.9) 1"-8 4865 (21.64) 4340 (19.30) 1351 (612.8)
B3142-8 8" (200) 11/8" (28.6) 61/4" (158.7) 73/4" (196.8) 1"-8 4865 (21.64) 4340 (19.30) 1573 (713.5)
B3142-10 10" (250) 11/4" (31.7) 77/8" (200.0) 91/2" (241.3) 11/4"-7 6010 (26.73) 5360 (23.84) 2537 (1150.8)
B3142-12 12" (300) 15/8" (41.3) 91/2" (241.3) 115/8" (295.3) 11/2"-6 8675 (38.58) 7740 (34.43) 4300 (1950.5)
B3142-14 14" (350) 15/8" (41.3) 101/8" (257.2) 121/4" (311.1) 11/2"-6 9120 (40.56) 8135 (36.18) 5228 (2371.4)
B3142-16 16" (400) 15/8" (41.3) 113/16" (284.2) 135/16" (338.1) 11/2"-6 9120 (40.56) 8135 (36.18) 5657 (2566.0)
B3142-18 18" (450) 15/8" (41.3) 123/16" (309.6) 145/16" (363.5) 11/2"-6 9150 (40.70) 8160 (36.29) 6914 (3136.2)
B3142-20 20" (500) 15/8" (41.3) 135/16" (338.1) 157/16" (392.1) 11/2"-6 9150 (40.70) 8160 (36.29) 7468 (3387.5)
B3142-24 24" (600) 13/4" (44.4) 153/8" (390.5) 173/4" (450.8) 11/2"-6 9200 (40.92) 8205 (36.49) 12629 (5728.5)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe
Part Size A B C D E
No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
B3144-1/2 1/2" (15) 3/8" (9.5) 213/16" (71.4) 23/16" (55.6) 11/2" (38.1) 7/8" (22.2)
B3144-3/4 3/4" (20) 5/8" (15.9) 3" (76.2) 23/8" (60.2) 111/16" (42.9) 11/16" (27.0)
B3144-1 1" (25) 5/8" (15.9) 31/4" (82.5) 25/8" (66.7) 115/16" (49.2) 15/16" (33.3)
B3144-11/4 11/4" (32) 5/8" (15.9) 31/2" (88.9) 27/8" (72.9) 23/16" (58.7) 19/16" (39.7)
B3144-11/2 11/2" (40) 1" (25.4) 53/8" (136.5) 41/2" (114.3) 25/8" (66.7) 13/4" (44.4)
B3144-2 2" (50) 1" (25.4) 513/16" (147.6) 415/16" (125.4) 215/16" (74.6) 21/16" (52.4)
Pipe Clamps
B3144-21/2 21/2" (65) 1" (25.4) 61/8" (155.6) 51/4" (133.3) 31/4" (82.5) 23/8" (60.3)
B3144-3 3" (75) 1" (25.4) 63/4" (171.4) 57/8" (149.2) 35/8" (92.1) 211/16" (68.3)
B3144-31/2 31/2" (90) 1" (25.4) 73/16" (182.6) 65/16" (160.3) 37/8" (98.4) 3" (76.2)
B3144-4 4" (100) 1" (25.4) 73/4" (196.8) 65/8" (168.3) 411/16" (119.1) 9
3 /16" (90.5)
B3144-5 5" (125) 1" (25.4) 89/16" (217.5) 77/16" (189.5) 55/16" (134.9) 43/16" (106.4)
B3144-6 6" (150) 11/2" (38.1) 97/8" (250.8) 81/2" (215.9) 61/8" (155.6) 43/4" (120.6)
B3144-8 8" (200) 11/2" (38.1) 11" (279.4) 95/8" (244.5) 75/16" (185.7) 515/16" (150.8)
B3144-10 10" (250) 11/2" (38.1) 12" (304.8) 101/2" (266.7) 87/8" (225.4) 75/16" (185.7)
B3144-12 12" (300) 11/2" (38.1) 131/8" (333.4) 115/8" (295.3) 915/16" (252.4) 87/16" (214.3)
B3144-14 14" (350) 2" (50.8) 145/16" (363.5) 129/16" (319.1) 115/16" (287.3) 99/16" (242.9)
B3144-16 16" (400) 2" (50.8) 159/16" (395.3) 1313/16" (350.8) 125/16" (312.7) 109/16" (268.3)
B3144-18 18" (450) 2" (50.8) 167/8" (428.6) 151/8" (384.2) 133/8" (339.7) 115/8" (295.3)
B3144-20 20" (500) 2" (50.8) 181/4" (463.5) 163/8" (415.9) 151/8" (384.2) 131/4" (336.5)
B3144-24 24" (600) 2" (50.8) 207/16" (519.7) 187/16" (468.3) 175/16" (439.7) 155/16" (388.9)
B3144-30 30" (750) 21/2" (63.5) 26" (660.4) 23" (584.2) 22" (558.8) 19" (482.6)
B3144-36 36" (900) 21/2" (63.5) 323/8" (822.2) 287/8" (733.4) 255/8" (650.9) 221/8" (562.0)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Component of State of
California OSHPD Approved
A Seismic Restraints System
Spacer
C
B
Pipe Clamps
B3144-21/2 1
2 /2" (65) 5/8"-11 1545 (6.87) 1380 (6.14) 274 (124.3)
B3144-3 3" (75) 5/8"-11 1545 (6.87) 1380 (6.14) 289 (131.1)
B3144-31/2 31/2" (90) 5/8"-11 1545 (6.87) 1380 (6.14) 315 (142.9)
B3144-4 4" (100) 3/4"-10 2500 (11.12) 2230 (9.92) 745 (337.9)
B3144-5 5" (125) 3/4"-10 2500 (11.12) 2230 (9.92) 828 (375.6)
B3144-6 6" (150) 7/8"-9 2865 (12.74) 2555 (11.36) 1261 (572.0)
B3144-8 8" (200) 7/8"-9 2865 (12.74) 2555 (11.36) 1535 (696.3)
B3144-10 10" (250) 1"-8 3240 (14.41) 2890 (12.85) 2173 (985.7)
B3144-12 12" (300) 1"-8 3240 (14.41) 2890 (12.85) 2404 (1090.4)
B3144-14 14" (350) 11/4"-7 4300 (19.12) 3835 (17.06) 4002 (1815.3)
B3144-16 16" (400) 11/4"-7 4300 (19.12) 3835 (17.06) 4362 (1978.6)
B3144-18 18" (450) 11/4"-7 4300 (19.12) 3835 (17.06) 4935 (2238.5)
B3144-20 20" (500) 13/8"-6 5490 (24.42) 4900 (21.79) 6570 (2980.1)
B3144-24 24" (600) 13/8"-6 4500 (20.01) 4015 (17.86) 7524 (3412.9)
B3144-30 30" (750) 13/8"-6 7500 (33.36) -- (--) 19502 (8846.1)
B3144-36 36" (900) 13/4"-5 10500 (46.70) -- (--) 23488 (10654.1)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Size A B C D E
Part No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
B3146-6 6" (150) 13/4" (44.4) 103/16" (258.8) 815/16" (227.0) 6" (152.4) 43/4" (120.6)
B3146-8 8" (200) 2" (50.8) 113/8" (288.9) 101/8" (257.2) 71/4" (184.1) 6" (152.4)
B3146-10 10" (350) 21/4" (57.1) 131/8" (333.4) 113/8" (288.9) 9" (228.6) 71/4" (184.1)
B3146-12 12" (300) 21/2" (63.5) 145/16" (363.5) 129/16" (319.1) 103/8" (263.5) 85/8" (219.1)
B3146-14 14" (450) 21/2" (63.5) 151/2" (393.7) 131/2" (342.9) 115/8" (295.3) 95/8" (244.5)
B3146-16 16" (400) 3" (76.2) 171/8" (435.0) 147/8" (377.7) 131/8" (333.4) 107/8" (276.2)
B3146-18 18" (550) 31/2" (88.9) 181/4" (463.5) 161/4" (412.7) 141/2" (368.3) 121/2" (317.5)
B3146-20 20" (500) 31/2" (88.9) 193/4" (501.6) 171/4" (438.1) 16" (406.4) 131/2" (342.9)
B3146-24 24" (600) 31/2" (88.9) 223/8" (568.3) 195/16" (490.5) 181/2" (469.9) 151/2" (393.7)
B3146-30 30" (750) 41/4" (107.9) 323/4" (831.8) 281/4" (717.5) 243/8" (619.1) 197/8" (504.8)
B3146-36 36" (900) 41/2" (107.9) 401/4" (1022.3) 343/4" (882.6) 301/8" (765.2) 225/8" (574.7)
Pipe Clamps
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Size Rod Size B C D Bolt Size Design Load Approx. Wt./100
Part No. in. (mm) A in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
4B-3/4 3/4" (20) 3/8"-16 1" (25.4) 27/8" (73.0) 25/8" (66.7) 5/16"-18 330 (1.47) 56 (3.6)
4B-1 1" (25) 3/8"-16 1" (25.4) 31/4" (82.5) 215/16" (74.6) 5/16"-18 330 (1.47) 60 (3.6)
4B-11/4 11/4" (32) 3/8"-16 1" (25.4) 39/16" (90.6) 31/4" (82.5) 5/16"-18 330 (1.47) 74 (4.5)
Pipe Clamps
4B-11/2 11/2" (40) 3/8"-16 1" (25.4) 313/16" (96.8) 37/16" (87.3) 5/16"-18 330 (1.47) 79 (5.0)
4B-2 2" (50) 3/8"-16 11/2" (38.1) 51/8" (130.2) 45/8" (117.5) 5/16"-18 440 (1.78) 156 (5.0)
4B-21/2 21/2" (65) 1/2"-13 13/4" (44.4) 55/8" (142.9) 53/8" (136.5) 3/8"-16 440 (1.78) 176 (5.4)
4B-3 3" (80) 1/2"-13 17/8" (47.6) 63/4" (171.4) 61/8" (155.5) 3/8"-16 660 (2.93) 198 (6.3)
4B-31/2 31/2" (90) 1/2"-13 2" (50.8) 71/4" (184.1) 63/4" (171.4) 3/8"-16 660 (2.93) 219 (7.2)
4B-4 4" (100) 5/8"-11 2" (50.8) 85/8" (219.1) 71/4" (184.1) 2/2"-13 800 (3.56) 288 (8.1)
4B-5 5" (125) 5/8"-11 2" (50.8) 97/8" (250.8) 85/16" (211.1) 5/8"-11 980 (4.36) 390 (8.1)
4B-6 6" (150) 3/4"-10 21/8" (54.0) 1015/16" (277.8) 91/2" (241.3) 5/8"-11 980 (4.36) 448 (8.1)
4B-8 8" (200) 7/8"-9 21/8" (54.0) 137/16" (341.2) 111/2" (292.1) 3/4"-10 1200 (5.34) 691 (8.1)
Eaton’s B-Line Business seismic bracing components are designed to be compatible only with other B-Line bracing components,
resulting in a listed seismic bracing assembly. B-Line’s warranty for seismic bracing components will be the warranty provided in
B-Line’s standard terms and conditions of sale made available by B-Line, except that, in addition to the other exclusions from
B-Line’s warranty, Eaton’s B-line Business makes no warranty relating to B-Line’s seismic bracing components that are combined
with products not provided by Eaton’s B-Line Business.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Size Range: 1/2" (15mm) thru 12" (300mm) pipe Bolts and Nuts
Included
Material: Steel
Bolt Size
Function: Recommended for support of pipe lines running at a B
definite distance from the wall or floor of a building or structure.
A
Maximum Temperature: — 650°F (343°C) C
H
Finish: Plain. Contact B-Line for alterantive finishes and materials. 2 Holes
Note: Special “A” dimensions available on request,
consult factory.
Order By: Part number, pipe size and finish
B3148-8 8" (200) 65/16" (160.3) 1/2"-13 167/16" (417.5) 9/16" (14.3) 870 (3.87) 787 (357.0)
B3148-10 10" (250) 73/8" (187.3) 3/4"-10 211/2" (546.1) 13/16" (20.6) 925 (4.11) 1238 (561.5)
B3148-12 12" (300) 83/8" (212.7) 3/4"-10 247/8" (631.8) 13/16" (20.6) 1225 (5.45) 2100 (952.5)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3149-3/4 3/4" (20) 12" (304.8) 3/8"-16" 47/16" (112.7) 225 (102.0)
B3149-1 1" (25) 12" (304.8) 3/8"-16" 411/16" (119.1) 230 (104.3)
B3149-11/4 11/4" (32) 12" (304.8) 3/8"-16" 5" (127.0) 235 (106.6)
B3149-11/2 11/2" (40) 12" (304.8) 3/8"-16" 51/4" (133.3) 240 (108.8)
B3149-2 2" (50) 12" (304.8) 1/2"-13" 6" (152.4) 345 (156.5)
B3149-21/2 1
2 /2" (65) 12" (304.8) 1/2"-13" 1
7 /4" (184.1) 360 (163.3)
B3149-3 3" (75) 12" (304.8) 1/2"-13" 77/8" (200.0) 375 (170.1)
B3149-31/2 31/2" (90) 12" (304.8) 1/2"-13" 83/8" (212.7) 390 (176.9)
B3149-4 4" (100) 12" (304.8) 1/2"-13" 91/4" (234.9) 500 (226.8)
Pipe Clamps
B3149-5 5" (125) 12" (304.8) 1/2"-13" 101/2" (266.7) 545 (247.2)
B3149-6 6" (150) 12" (304.8) 5/8"-11" 121/2" (317.5) 870 (394.6)
B3149-8 8" (200) 12" (304.8) 5/8"-11" 145/8" (371.5) 980 (444.5)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Part Pipe Size A B C D Hole Size Max. Rec. Load Approx. Wt./100
No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
B3180FL-1/2 1/2" (15) 41/8" (104.8) 5/16" (7.9) 27/8" (73.0) 3/4" (19.0) 7/16 (11.1) 410 (1.82) 21 (9.5)
B3180FL-3/4 3/4" (20) 45/16" (109.5) 7/16" (11.1) 3" (76.2) 15/16" (23.8) 7/16" (11.1) 410 (1.82) 24 (10.9)
B3180FL-1 1" (25) 49/16" (115.9) 9/16" (14.3) 3
3 /8" (85.7) 11/8" (28.6) 7/16" (11.1) 410 (1.82) 26 (11.8)
Pipe Clamps
B3180FL-11/4 11/4" (32) 415/16" (125.4) 11/16" (17.5) 33/4" (95.2) 11/2" (38.1) 7/16" (11.1) 410 (1.82) 30 (13.6)
B3180FL-11/2 11/2" (40) 53/16" (131.8) 13/16" (20.6) 41/4" (107.9) 15/8" (41.3) 7/16" (11.1) 410 (1.82) 33 (14.9)
B3180FL-2 2" (50) 53/4" (146.0) 11/16" (27.0) 43/4" (120.6) 21/4" (57.1) 7/16" (11.1) 410 (1.82) 38 (17.2)
B3180FL-21/2 1
2 /2" (65) 61/4" (158.7) 19/16" (39.7) 51/4" (133.3) 23/4" (69.8) 7/16" (11.1) 610 (2.71) 102 (46.2)
B3180FL-3 3" (75) 67/8" (174.6) 15/8" (41.3) 57/8" (149.2) 33/8" (85.7) 7/16" (11.1) 610 (2.71) 118 (53.5)
B3180FL-31/2 31/2" (90) 73/8" (187.3) 17/8" (47.6) 63/8" (161.9) 37/8" (98.3) 7/16" (11.1) 610 (2.71) 130 (58.9)
B3180FL-4 4" (100) 83/8" (212.7) 21/8" (53.9) 7" (177.8) 43/8" (111.1) 9/16" (14.3) 725 (3.22) 159 (72.1)
B3180FL-5 5" (125) 97/16" (239.7) 25/8" (66.7) 77/8" (200.0) 53/8" (136.5) 9/16" (14.3) 725 (3.22) 191 (86.6)
B3180FL-6 6" (150) 101/2" (266.7) 33/16" (80.9) 87/8" (225.4) 67/16" (163.5) 9/16" (14.3) 725 (3.22) 234 (106.1)
B3180FL-8 8" (200) 14" (355.6) 41/4" (107.9) 111/2" (292.1) 83/8" (212.7) 11/16" (17.5) 900 (4.00) 446 (202.3)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Part Pipe Size A B C D Hole Size Max. Rec. Load Approx. Wt./100
No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
B3180-1/2 1/2" (15) 37/8" (98.4) 3/4" (19.0) 31/16" (77.8) 15/32" (11.9) 7/16 (11.1) 410 (1.82) 16 (7.2)
B3180-3/4 3/4" (20) 4" (101.6) 13/16" (20.6) 31/8" (79.4) 15/16" (33.3) 7/16" (11.1) 410 (1.82) 21 (9.5)
B3180-1 1" (25) 49/16" (115.9) 7/8" (22.2) 33/8" (85.7) 11/2" (38.1) 7/16" (11.1) 410 (1.82) 26 (11.8)
Pipe Clamps
B3180-11/4 1
1 /4" (32) 415/16" (125.4) 1" (25.4) 33/4" (95.2) 17/8" (47.6) 7/16" (11.1) 410 (1.82) 30 (13.6)
B3180-11/2 11/2" (40) 53/16" (131.8) 13/16" (30.2) 41/4" (107.9) 21/8" (54.6) 7/16" (11.1) 410 (1.82) 33 (14.9)
B3180-2 2" (50) 53/4" (146.0) 17/16" (36.5) 43/4" (120.6) 25/8" (66.7) 7/16" (11.1) 410 (1.82) 38 (17.2)
B3180-21/2 21/2" (65) 61/4" (158.7) 111/16" (42.9) 51/4" (133.3) 31/8" (79.4) 7/16" (11.1) 610 (2.71) 102 (46.2)
B3180-3 3" (75) 67/8" (174.6) 2" (50.8) 57/8" (149.2) 33/4" (95.2) 7/16" (11.1) 610 (2.71) 118 (53.5)
B3180-31/2 31/2" (90) 73/8" (187.3) 21/4" (57.1) 63/8" (161.9) 41/4" (107.9) 7/16" (11.1) 610 (2.71) 130 (58.9)
B3180-4 4" (100) 83/8" (212.7) 21/2" (63.5) 7" (177.8) 43/4" (120.6) 9/16" (14.3) 725 (3.22) 159 (72.1)
B3180-5 5" (125) 97/16" (239.7) 31/16" (77.8) 77/8" (200.0) 513/16" (147.6) 9/16" (14.3) 725 (3.22) 191 (86.6)
B3180-6 6" (150) 101/2" (266.7) 35/8" (92.1) 87/8" (225.4) 67/8" (174.6) 9/16" (14.3) 725 (3.22) 234 (106.1)
B3180-8 8" (200) 14" (355.6) 45/8" (117.5) 111/2" (292.1) 9" (228.6) 11/16" (17.5) 900 (4.00) 446 (202.3)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Design Load 2
B2400-1/2 1/2” (15) 5/16” (7.9) 7/16” (11.1) 213/16” (71.4) 10 Ga. (3.4) 15/8” (41.3)
B2400-3/4 3/4” (20) 5/16” (7.9) 7/16” (11.1) 3” (76.2) 10 Ga. (3.4) 15/8” (41.3)
B2400-1 1” (25) 5/16” (7.9) 7/16” (11.1) 317/32” (89.7) 10 Ga. (3.4) 15/8” (41.3)
B2400-11/4 11/4” (32) 5/16” (7.9) 7/16” (11.1) 33/4” (95.2) 10 Ga. (3.4) 15/8” (41.3)
B2400-11/2 11/2” (40) 5/16” (7.9) 7/16” (11.1) 41/16” (103.2) 10 Ga. (3.4) 15/8” (41.3)
B2400-2 2” (50) 7/16” (11.1) 11/16” (17.4) 521/32” (143.6) 1/4” (6.3) 15/8” (41.3)
B2400-21/2 21/2” (65) 7/16” (11.1) 11/16” (17.4) 65/32” (156.3) 1/4” (6.3) 15/8” (41.3)
B2400-3 3” (80) 7/16” (11.1) 11/16” (17.4) 625/32” (172.2) 1/4” (6.3) 15/8” (41.3)
Pipe Clamps
B2400-31/2 31/2” (90) 7/16” (11.1) 11/16” (17.4) 79/32” (184.9) 1/4” (6.3) 15/8” (41.3)
B2400-4 4” (100) 9/16” (14.3) 11/16” (17.4) 725/32” (197.6) 1/4” (6.3) 15/8” (41.3)
B2400-5 5” (125) 9/16” (14.3) 11/16” (17.4) 87/8” (225.4) 1/4” (6.3) 15/8” (41.3)
B2400-6 6” (150) 9/16” (14.3) 11/16” (17.4) 915/16” (252.4) 1/4” (6.3) 15/8” (41.3)
B2400-8 8” (200) 9/16” (14.3) 11/16” (17.4) 1131/32” (304.0) 1/4” (6.3) 15/8” (41.3)
B2400-10 10” (250) 9/16” (14.3) 11/16” (17.4) 14” (355.6) 1/4” (6.3) 15/8” (41.3)
B2400-12 12” (300) 9/16” (14.3) 11/16” (17.4) 16” (406.4) 1/4” (6.3) 15/8” (41.3)
B2400-14 14” (350) 15/16” (23.8) 15/16” (33.3) 203/8” (517.5) 3/8” (9.5) 13/4” (44.4)
B2400-16 16” (400) 15/16” (23.8) 15/16” (33.3) 223/8” (568.3) 3/8” (9.5) 13/4” (44.4)
B2400-18 18” (450) 15/16” (23.8) 15/16” (33.3) 261/8” (663.6) 1/2” (12.7) 13/4” (44.4)
B2400-20 20” (500) 15/16” (23.8) 15/16” (33.3) 281/8” (714.4) 1/2” (12.7) 13/4” (44.4)
B2400-24 24” (600) 15/16” (23.8) 15/16” (33.3) 321/8” (816.0) 1/2” (12.7) 13/4” (44.4)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Bolt Size
Design A
Load 3 C
W
Design Load 2
Part No. Design Load 1 Design Load 2 Design Load 3 Approx. Wt./100
Lbs. (kN) Lbs. (kN) Lbs. (kN) Lbs. (kg)
Pipe Clamps
B2400-3 1200 (5.34) 480 (2.14) 300 (1.33) 132 (59.9)
B2400-31/2 1200 (5.34) 480 (2.14) 300 (1.33) 151 (68.5)
B2400-4 1500 (6.67) 600 (2.67) 450 (2.00) 160 (72.6)
B2400-5 1500 (6.67) 600 (2.67) 450 (2.00) 192 (87.1)
B2400-6 1500 (6.67) 600 (2.67) 450 (2.00) 219 (99.3)
B2400-8 2000 (8.90) 800 (3.56) 600 (2.67) 297 (134.7)
B2400-10 2000 (8.90) 800 (3.56) 600 (2.67) 465 (210.9)
B2400-12 2000 (8.90) 800 (3.56) 600 (2.67) 560 (254.0)
B2400-14 2000 (8.90) 800 (3.56) 600 (2.67) 761 (345.2)
B2400-16 2000 (8.90) 800 (3.56) 600 (2.67) 861 (390.5)
B2400-18 2000 (8.90) 800 (3.56) 600 (2.67) 1297 (588.3)
B2400-20 2000 (8.90) 800 (3.56) 600 (2.67) 1426 (646.8)
B2400-24 2000 (8.90) 800 (3.56) 600 (2.67) 1682 (762.9)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Features: Fig. 22 incorporates features which protect the pipe and ease B
installation. The flared edge design protects CPVC pipe from any rough
surface. It is easily attached to the building structure using the special UL
Listed hex head self threading screw* furnished with the product. It is
recommended that rechargeable electric drills fitted with a hex socket
attachment to be used as installation tools. No impact tools (such as a
hammer) are allowed. Damage has been known to result from installations
using impact type tools. No pre-drilling of a pilot hole in wood is
required.
Finish: Pre-Galvanized
Order By: Part number and CPVC pipe size.
* Hardened hex head self threading screw is furnished with the
product and is the minimum fastener size acceptable.
22-3/4 3/4" (20) 27/16" (61.9) 15/16" (33.3) 13/16" (30.2) 51/2 (1.67) 5/16" (7.9) 9 (4.1)
22-1 1" (25) 211/16" (68.3) 17/16" (36.5) 13/16" (30.2) 6 (1,83) 5/16" (7.9) 9 (4.1)
22-11/4 11/4" (32) 31/16" (77.8) 15/8" (42.3) 13/16" (30.2) 61/2 (1.98) 5/16" (7.9) 11 (5.0)
22-11/2 11/2" (40) 35/16" (84.1) 13/4" (44.4) 13/16" (30.2) 7 (2.13) 5/16" (7.9) 12 (5.4)
22-2 2" (50) 33/4" (95.2) 21/8" (54.6) 13/16" (30.2) 8 (2.44) 5/16" (7.9) 15 (6.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Size Range: 3/4" (20mm) thru 2" (50mm) CPVC & steel pipe
Material: Pre-Galvanized Steel
Function: cULus Listed to perform as a hanger and restrainer for CPVC or
IPS piping systems. The innovative design also allows for a preferred C
installation location close to a CPVC fitting without applying damaging
compression forces on the pipe which could result in serious Mechanical ESC
(Environmental Stress Cracking). A
Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada
(cUL) to support fire sprinkler piping. May be installed in wood using
fasteners supplied with product, or into minimum 20 gauge (0.9mm) steel using
(1) 1/4" x 1" tek type screw. Meets and exceeds the requirements of NFPA 13,
13R and 13D.
Installation Note: Comes in open position for easier installation. Because of
multi – structural installation possibilities, specific fastener not included; see
notes below for various applications.
For Concrete Installation — UL requires a minimum test load of 340 lbs for
CPVC hangers and 750 lbs for steel pipe hangers; verify anchors meet or
exceed these requirements.
For Wood Installation — Test results have shown that #14 x 1½” wood B
screws will support the required load for c UL us.
For Steel Installation — Test results have shown that 1/4” x 1” (min. 20ga
steel) Tek type screw will support required UL load.
Finish: Pre-Galvanized
Order By: Part number
Patent Pending
Mounting
MOUNTING SURFACE
Surface
Hanger/Restrainer
HANGER/RESTRAINER
Tab DOWN
TAB Down
or TAB
or Tab UP
Up
Pipe Clamps
Sprinkler
SPRINKLER
Head
HEAD
Pipe OD
PIPE OD
Offset
OFFSET
DESIGN
Design
Hanger/Restrainer
HANGER/RESTRAINER Fitting
FITTING OD
OD
22L2-3/4 3/4" (20) 23/16" (55.6) 15/16" (23.8) 3/4" (19.0) 51/2 (1.67) NA (NA) 9 (4.1)
22L2-1 1" (25) 21/2" (63.5) 11/8" (28.6) 3/4" (19.0) 6 (1,83) 12 (3.66) 9 (4.1)
22L2-11/4 11/4" (32) 213/16" (71.4) 11/4" (31.7) 3/4" (19.0) 61/2 (1.98) 12 (3.66) 11 (5.0)
22L2-11/2 11/2" (40) 31/8" (79.4) 17/16" (36.5) 3/4" (19.0) 7 (2.13) 15 (4.57) 12 (5.4)
22L2-2 2" (50) 39/16" (90.5) 15/8" (41.3) 3/4" (19.0) 8 (2.44) 15 (4.57) 15 (6.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Part No. in. (mm) in. (mm) in. (mm) in. (mm) Ft. (m) in. (mm) Lbs. (kg)
23-3/4 3/4" (20) 31/8" (79.4) 19/16" (39.7) 13/16" (30.2) 51/2 (1.67) 5/16" (7.9) 9 (4.1)
23-1 1" (25) 33/8" (85.7) 111/16" (42.9) 13/16" (30.2) 6 (1,83) 5/16" (7.9) 9 (4.1)
23-11/4 11/4" (32) 43/16" (106.4) 23/32" (53.1) 13/16" (30.2) 61/2 (1.98) 5/16" (7.9) 11 (5.0)
23-11/2 11/2" (40) 47/16" (112.7) 27/32" (56.3) 13/16" (30.2) 7 (2.13) 5/16" (7.9) 12 (5.4)
23-2 2" (50) 47/8" (123.8) 27/16" (61.9) 13/16" (30.2) 8 (2.44) 5/16" (7.9) 15 (6.8)
23-21/2 21/2" (65) 53/8" (136.5) 211/16" (68.3) 13/16" (30.2) Consult Factory 5/16" (7.9) 22 (10.0)
23-3 3" (80) 6" (152.4) 3" (76.2) 13/16" (30.2) Consult Factory 5/16" (7.9) 25 (11.3)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
24-3/4 3/4" (20) 25/16" (58.7) 15/32" (27.8) 13/16" (30.2) 51/2 (1.67) 5/16" (7.9) 9 (4.1)
Pipe Clamps
24-1 1" (25) 25/8" (66.7) 15/16" (33.3) 13/16" (30.2) 6 (1,83) 5/16" (7.9) 9 (4.1)
24-11/4 11/4" (32) 3" (76.2) 11/2" (38.1) 13/16" (30.2) 61/2 (1.98) 5/16" (7.9) 11 (5.0)
24-11/2 11/2" (40) 1
3 /4" (82.5) 15/8" (42.3) 13/16" (30.2) 7 (2.13) 5/16" (7.9) 12 (5.4)
24-2 2" (50) 311/16" (93.7) 127/32" (43.6) 13/16" (30.2) 8 (2.44) 5/16" (7.9) 15 (6.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Patent #5,344,108
Pipe Clamps
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Fig. 27B
Fig. 27B
(1) Required High
(2) Required
Side of Hanger
Application
Pipe Clamps
Fig. 27B
(2) Required
Fig. 27B
(1) Required High Side of
Hanger Application
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Fig. 27B
Fig. 27B
(2) Required
(1) Required High
Side of Hanger
Application
28-3/4 3/4" (20) 31/32" (77.0) 2" (50.8) 31/2" (88.9) 18 (8.1)
28-1 1" (25) 35/16" (84.1) 23/16" (55.6) 31/2" (88.9) 21 (9.5)
28-11/4 11/4" (32) 35/8" (92.1) 23/8" (60.3) 31/2" (88.9) 23 (10.4)
28-11/2 11/2" (40) 4" (101.6) 21/2" (63.5) 31/2" (88.9) 31 (14.0)
28-2 2" (50) 1
4 /2" (114.3) 211/16" (68.3) 35/8" (92.1) 34 (15.4)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Clamps
Fig. 27B
Restraint
(1) Required
High Side of Hanger
Restraint
Detail A
Hanger Application
28M-3/4 3/4" (20) 2" (50.8) 3/16" (4.8) 35/16" (84.1) 5’-6” (1676) 9 (4.1)
28M-1 1" (25) 21/8" (54.0) 3/16" (4.8) 31/2" (88.9) 6’-0” (1829) 12 (5.4)
28M-11/4 11/4" (32) 25/16" (58.7) 3/16" (4.8) 31/2" (88.9) 6’-6” (1981) 13 (5.9)
28M-11/2 11/2" (49) 27/16" (61.9) 3/16" (4.8) 37/8" (98.4) 7’-0” (2133) 14 (6.3)
28M-2 2" (50) 25/8" (66.7) 3/16" (4.8) 47/16" (112.7) 8’-0” (2438) 15 (6.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
1.5”
(38.1mm)
Pipe Clamps
Double Offset
Single Offset
Install using a rechargeable electric drill fitted with a 5/16” (7.9mm) socket attachment with the special hex head self-tapping
screws provided. Install screws until they bottom out. Pipe can be “snapped” into hanger before or after installation of
the screws to the mounting surface. “Thumb tab” may be bent up to provide additional protection to the pipe, but is not
required for performance of the hanger / restrainer function.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Features:
• Flared edge design protects CPVC pipe from any rough or abrasive
surfaces
• The “Stand-Off” design eliminates the need for wood block extension
• Can be installed on horizontal or vertical piping regardless of mounting
surface orientation
• Attaches easily to wood structure with two hex head self-threading
H
screws furnished with product
• cULus Listed as a hanger for fire sprinkler piping
Installation Note: When installed in wood structural members and threads
from the #10 x 1" screws are exposed, use Fig. 27B speed nut to secure L
Patent # 7,744,042
Pipe Clamps
CPVC L H Max. Hanger Fastener Hex Approx.
Pipe Size Overall Overall Spacing Head Size Wt./100
Part No. in. (mm) in. (mm) in. (mm) ft. (m) in. (mm) Lbs. (kg)
B3184-3/4 3/4" (20) 29/16" (65.1) 41/4" (107.9) 51/2 (1.67) 5/16" (7.9) 9.0 (4.1)
B3184-1 1" (25) 213/16" (71.4) 41/2" (114.3) 6 (1,83) 5/16" (7.9) 10.0 (4.5)
B3184-11/4 1
1 /4" (32) 33/16" (81.0) 45/8" (117.5) 1
6 /2 (1.98) 5/16" (7.9) 12.0 (5.4)
B3184-11/2 11/2" (40) 37/16" (87.3) 5" (127.0) 7 (2.13) 5/16" (7.9) 12.0 (5.4)
B3184-2 2" (50) 37/8" (98.4) 5" (127.0) 8 (2.44) 5/16" (7.9) 15.0 (6.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
BPRC Series
Pipe Clamps
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Clamps
BPIC150 -- (--) 11/2” (38.1) -- (--) 3.8 (1.7)
BPIC162 11/2” (40) 15/8” (41.3) -- (--) 4.0 (1.8)
BPIC200 -- (--) 2” (50.8) -- (--) 4.2 (1.9)
BPIC212 2” (50) 21/8” (54.0) -- (--) 4.4 (2.0)
Insert in channel. Twist into place. Lay tubing/pipe into clip. Snap clip closed.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe rollers and roller supports offered in this section are designed to compensate for longitudinal
movement due to the expansion or contraction of both insulated or non-insulated pipe.
Materials
Carbon Steel with Cast Iron rollers are used in the manufacture of pipe roller supports. Stainless Steel and other
materials are available.
Finishes
The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and
Electro-Galvanized Zinc (ASTM B633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A123), Red Primer, Plastic
Pipe Rollers &
Pipe Supports
Coating, DURA-GREEN™ and other special coatings are available upon request.
Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may or may not be
uniformly coated with special finishes. In some cases, the hanger itself may be coated, however, the hardware may
be supplied Electro-Plated, Copper plated, or in Stainless Steel.
Approvals (as noted)
Items in this section comply with Federal Specification WW-H-171E & A-A-1192A or Manufacturers Standardization
Society ANSI/MSS SP-69 SP-58.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3110-6 7" (177.8) 63/4" (171.4) 780 (3.47) 800 (362.9) Notes: If using D.I. pipe
B3110-8 9" (228.6) 83/4" (222.2) 780 (3.47) 1300 (589.7) refer to page 298 for sizing.
B3110-10 111/8" (282.6) 103/4" (273.0) 965 (4.29) 1600 (725.7) Non-metallic rollers with
stainless steel yoke and
B3110-12 133/8" (339.7) 13" (330.2) 1200 (5.34) 2600 (1179.3)
hardware are available for
B3110-14 141/2" (368.3) 141/4" (361.9) 1200 (5.34) 3400 (1542.2)
most sizes (B3110NM-Pipe
B3110-16 163/8" (415.9) 161/8" (409.6) 1200 (5.34) 3900 (1769.0) Size). Contact B-Line
B3110-18 183/8" (466.7) 181/8" (460.4) 1400 (6.23) 4900 (2222.6) Engineering for more
B3110-20 203/8" (517.5) 201/8" (511.2) 1600 (7.11) 6686 (3032.7) information.
B3110-24 245/8" (625.5) 243/8" (619.1) 1800 (8.00) 11630 (5275.3)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Note: When pipe line is insulated, total outside diameter of pipe and covering should be
used to determine size of hanger; also see B3160 to B3165 on pages 155 thru 160.
A
Finish: Plain. Contact B-Line for alternative finishes and materials. F
(Rod Size)
Furnished With: B3114 Roller, two support rods and eight HN Hex Nuts — not assembled.
C
Order By: Part number, pipe size and finish
Note: Not for continuous cycling applications. D
Length of Roller
E
Pipe Size Rod Size B C D Center of axle to
Part No. in. (kg) A in. (kg) in. (kg) in. (kg) center of pipe.
3/8"-16 F
B3122-2 2" (50) 12" (304.8) 41/8" (104.8) 25/8" (66.7) Center of axle to
B3122-21/2 21/2" (65) 1/2"-13 12" (304.8) 47/8" (123.8) 31/8" (79.4) bottom of socket.
B3122-3 3" (80) 1/2"-13 12" (304.8) 51/2" (139.7) 33/4" (95.2)
B3122-31/2 1
3 /2" (90) 1/2"-13 12" (304.8) 61/8" (155.6) 41/4" (107.9)
B3122-4 4" (100) 5/8"-11 12" (304.8) 63/4" (171.4) 43/4" (120.6)
B3122-5 5" (125) 5/8"-11 12" (304.8) 81/16" (204.8) 513/16" (147.6)
B3122-6 6" (150) 3/4"-10 12" (304.8) 99/16" (242.9) 67/8" (174.6)
B3122-8 8" (200) 7/8"-9 12" (304.8) 1115/16" (303.2) 87/8" (225.4)
B3122-10 10" (250) 7/8"-9 12" (304.8) 141/16" (357.2) 11" (279.4)
B3122-12 12" (300) 7/8"-9 12" (304.8) 1513/16" (401.6) 13" (330.2)
B3122-14 14" (350) 1"-8 12" (304.8) 173/4" (450.8) 141/4" (361.9)
B3122-16 16" (400) 1"-8 18" (457.2) 193/4" (501.6) 161/4" (412.7)
B3122-18 18" (450) 1"-8 18" (457.2) 217/8" (555.6) 181/4" (463.5)
B3122-20 20" (500) 1
1 /4"-7 18" (457.2) 241/4" (615.9) 201/4" (514.3)
B3122-24 24" (600) 11/2"-6 24" (609.6) 287/8" (733.4) 241/4" (615.9) Notes: If using D.I. pipe
refer to page 298 for sizing.
Non-metallic rollers with
E F Design Load Approx. Wt./100 hot-dip galvanized sockets
Part No. in. (kg) in. (kg) Lbs. (kN) Lbs. (kg)
and stainless steel hardware
B3122-2 19/16" (39.7) 3/4" (19.0) 600 (2.67) 194 (88.0) are available for most sizes
B3122-21/2 17/8" (47.6) 3/4" (19.0) 660 (2.93) 284 (128.8) (B3122NM-Pipe Size).
Contact B-Line Engineering
B3122-3 23/16" (55.6) 3/4" (19.0) 700 (3.11) 302 (137.0)
for more information.
B3122-31/2 21/2" (63.5) 3/4" (19.0) 750 (3.33) 314 (142.4)
B3122-4 23/4" (69.8) 3/4" (19.0) 750 (3.33) 438 (198.7)
Pipe Rollers &
Pipe Supports
B3122-5 33/8" (85.7) 3/4" (19.0) 750 (3.33) 495 (224.5)
B3122-6 315/16" (100.0) 11/8" (28.6) 1070 (4.76) 867 (393.3)
B3122-8 51/16" (128.6) 11/8" (28.6) 1350 (6.00) 1176 (533.4)
B3122-10 61/4" (158.7) 11/8" (28.6) 1730 (7.69) 1368 (620.5)
B3122-12 73/8" (187.3) 11/8" (28.6) 2400 (10.67) 1861 (844.1)
B3122-14 81/4" (209.5) 11/2" (38.1) 3130 (13.92) 3116 (1413.4)
B3122-16 97/16" (239.7) 11/2" (38.1) 3970 (17.66) 3550 (1610.3)
B3122-18 101/2" (266.7) 11/2" (38.1) 4200 (18.68) 4328 (1963.2)
B3122-20 111/2" (292.1) 11/2" (38.1) 4550 (20.24) 5241 (2377.3)
B3122-24 1313/16" (350.8) 2" (50.8) 6160 (27.40) 7773 (3525.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Furnished With: B3114 Roller, two support rods and eight HN Hex Nuts — not assembled. A
Order By: Part number, pipe size and finish (Rod Size)
F
Note: Not for continuous cycling applications. C
D
Length of Roller
Pipe Size Rod Size B C D E
Part No. in. (kg) A in. (kg) in. (kg) in. (kg) Center of axle to
center of pipe.
B3122A-2 2" (50) 3/8"-16 12" (304.8) 41/8" (104.8) 25/8" (66.7) F
B3122A-21/2 21/2" (65) 1/2"-13 14" (355.6) 47/8" (123.8) 31/8" (79.4) Center of axle to
bottom of socket.
B3122A-3 3" (80) 1/2"-13 14" (355.6) 51/2" (139.7) 33/4" (95.2)
B3122A-31/2 31/2" (90) 1/2"-13 14" (355.6) 61/8" (155.6) 41/4" (107.9)
B3122A-4 4" (100) 5/8"-11 18" (457.2) 63/4" (171.4) 43/4" (120.6)
B3122A-5 5" (125) 5/8"-11 18" (457.2) 81/16" (204.8) 513/16" (147.6)
B3122A-6 6" (150) 3/4"-10 24" (609.6) 99/16" (242.9) 67/8" (174.6)
B3122A-8 8" (200) 7/8"-9 24" (609.6) 1115/16" (303.2) 87/8" (225.4)
B3122A-10 10" (250) 7/8"-9 30" (762.0) 141/16" (357.2) 11" (279.4)
B3122A-12 12" (300) 7/8"-9 30" (762.0) 1513/16" (401.6) 13" (330.2)
B3122A-14 14" (350) 1"-8 36" (914.4) 173/4" (450.8) 141/4" (361.9)
B3122A-16 16" (400) 1"-8 36" (914.4) 193/4" (501.6) 161/4" (412.7)
B3122A-18 18" (450) 1"-8 42" (1066.8) 217/8" (555.6) 181/4" (463.5)
B3122A-20 20" (500) 11/4"-7 42" (1066.8) 241/4" (615.9) 201/4" (514.3) Notes: If using D.I. pipe
B3122A-24 24" (600) 11/2"-6 48" (1219.2) 287/8" (733.4) 241/4" (615.9) refer to page 298 for sizing.
Non-metallic rollers with
E F Design Load Approx. Wt./100 hot-dip galvanized sockets
Part No. in. (kg) in. (kg) Lbs. (kN) Lbs. (kg) and stainless steel hardware
B3122A-2 19/16" (39.7) 3/4" (19.0) 600 (2.67) 323 (146.5) are available for most sizes
(B3122ANM-Pipe Size).
B3122A-21/2 17/8" (47.6) 3/4" (19.0) 660 (2.93) 465 (210.9)
Contact B-Line Engineering
B3122A-3 23/16" (55.6) 3/4" (19.0) 700 (3.11) 501 (227.2)
for more information.
B3122A-31/2 21/2" (63.5) 3/4" (19.0) 750 (3.33) 525 (238.1)
B3122A-4 23/4" (69.8) 3/4" (19.0) 750 (3.33) 757 (343.4)
Pipe Rollers &
Pipe Supports
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Recommended
Bolt Size D
Pipe Size A B C (Not Included)
Part No. in. (mm) in. (mm) in. (mm) in. (mm)
B3120-2 2" (50) 11/4" (31.7) 45/8" (117.5) 11/2" (38.1) 3/8"-16 x 11/2"
B3120-21/2 21/2" (65) 11/4" (31.7) 53/8" (136.5) 15/8" (41.3) 3/8"-16 x 11/2"
B3120-3 3" (80) 2" (50.8) 6" (152.4) 13/4" (44.4) 3/8"-16 x 11/2"
B3120-31/2 1
3 /2" (90) 2" (50.8) 3
6 /4" (171.4) 21/16" (52.4) 3/8"-16 x 11/2" Notes: If using D.I. pipe
refer to page 298 for sizing.
B3120-4 4" (100) 2" (50.8) 71/4" (184.1) 25/16" (58.7) 1/2"-13 x 11/2"
Non-metallic rollers with
B3120-5 5" (125) 3" (76.2) 87/16" (214.3) 21/2" (63.5) 1/2"-13 x 11/2"
stainless steel chair and
B3120-6 6" (150) 31/8" (79.4) 93/4" (247.6) 23/4" (69.8) 1/2"-13 x 11/2" hardware are available for
B3120-8 8" (200) 33/8" (85.7) 12" (304.8) 3" (76.2) 5/8"-11 x 11/2" most sizes (B3120NM-Pipe
Size). Contact B-Line
B3120-10 10" (250) 51/4" (133.3) 147/16" (366.7) 5
3 /8" (92.1) 5/8"-11 x 2"
Engineering for more
B3120-12 12" (300) 51/2" (139.7) 165/8" (422.3) 41/8" (104.8) 5/8"-11 x 2"
information.
B3120-14 14" (350) 6" (152.4) 181/4" (463.5) 45/8" (117.5) 5/8"-11 x 2"
B3120-16 16" (400) 8" (203.2) 21" (533.4) 5" (127.0) 5/8"-11 x 21/2"
B3120-18 18" (450) 9" (228.6) 23" (584.2) 51/4" (133.3) 5/8"-11 x 21/2"
B3120-20 20" (500) 10" (254.0) 25" (635.0) 53/4" (146.0) 3/4"-10 x 3"
B3120-24 24" (600) 12" (304.8) 30" (762.0) 7" (177.8) 3/4"-10 x 3"
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3124-2 to 31/2 113/16" (46.0) 23/4" (69.8) 3/16" x 11/2" (4.8 x 38.1) 390 (1.73) 233 (105.7)
B3124-4 to 6 2" (50.8) 33/4" (95.2) 1/4" x 2" (6.3 x 50.8) 600 (2.67) 368 (166.9)
B3124-8 to 10 211/16" (68.3) 6" (152.4) 3/8" x 2" (9.5 x 50.8) 800 (3.56) 919 (416.8)
B3124-12 to 14 31/4" (82.5) 8" (203.2) 1/2" x 2" (12.7 x 50.8) 1300 (5.78) 1660 (753.0)
B3124-16 to 20 31/2" (88.9) 9" (228.6) 1/2" x 2" (12.7 x 50.8) 2300 (10.23) 2250 (1020.6)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Size A B C D
Part No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
2" (50) 17/16" (36.5) 6" (152.4) 311/64" (80.6) 75/8" (193.7)
21/2" (65) 17/16" (36.5) 6" (152.4) 327/64" (86.9) 75/8" (193.7)
B3126-2 to 31/2
3" (80) 17/16" (36.5) 6" (152.4) 347/64" (94.8) 75/8" (193.7)
31/2" (90) 17/16" (36.5) 6" (152.4) 363/64" (101.2) 75/8" (193.7)
4" (100) 17/16" (36.5) 7" (177.8) 413/64" (106.8) 85/8" (219.1)
B3126-4 to 6 5" (125) 17/16" (36.5) 7" (177.8) 447/64" (120.2) 85/8" (219.1)
6" (150) 17/16" (36.5) 7" (177.8) 517/64" (133.8) 85/8" (219.1)
8" (200) 113/16" (46.0) 83/4" (222.3) 7" (177.8) 103/8" (263.5)
B3126-8 to 10
10" (250) 113/16" (46.0) 83/4" (222.3) 81/16" (204.8) 103/8" (263.5)
12" (300) 27/16" (61.9) 121/8" (308.0) 927/32" (250.1) 143/8" (365.1)
B3126-12 to 14
14" (350) 27/16" (61.9) 121/8" (308.0) 1015/32" (265.9) 143/8" (365.1)
16" (400) 25/8" (66.7) 131/8" (333.4) 117/8" (301.6) 153/8" (390.5)
B3126-16 to 20 18" (450) 25/8" (66.7) 131/8" (333.4) 127/8" (327.1) 153/8" (390.5)
20" (500) 25/8" (66.7) 131/8" (333.4) 137/8" (352.4) 153/8" (390.5)
B3126-2 to 31/2 9/16" (14.3) 1/4" x 15/8" (6.3 x 41.3) 390 (1.73) 177 (80.3)
B3126-4 to 6 9/16" (14.3) 1/4" x 15/8" (6.3 x 41.3) 600 (2.67) 231 (104.8)
B3126-8 to 10 9/16" (14.3) 1/4" x 15/8" (6.3 x 41.3) 800 (3.56) 542 (245.8)
B3126-12 to 14 13/16" (20.6) 3/8" x 2" (9.5 x 50.8) 1300 (5.78) 1040 (471.7)
B3126-16 to 20 13/16" (20.6) 3/8" x 2" (9.5 x 50.8) 2300 (10.23) 1508 (684.0)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
11/2" (40) 31/4" (82.5) 43/8" (111.1) 47/8" (123.8) 55/16" (134.9) 53/4" (146.0) -- -- -- --
2" (50) 39/16" (90.5) 411/16" (119.1) 51/16" (128.6) 55/8" (142.9) 61/16" (154.0) -- -- -- --
21/2" (65) 313/16" (96.8) 47/8" (123.8) 55/16" (134.9) 6" (152.4) 63/8" (161.9) -- -- -- --
3" (80) 41/8" (104.8) 51/16" (128.6) 59/16" (141.3) 61/8" (155.6) 67/16" (163.5) 7" (177.8) -- --
31/2" (90) 43/8" (111.1) 55/16" (134.9) 513/16" (147.6) 61/4" (158.7) 611/16" (169.9) 71/4" (184.1) -- --
4" (100) 45/8" (117.5) 59/16" (141.3) 61/16" (154.0) 67/16" (163.5) 615/16" (176.2) 73/8" (187.3) -- --
5" (125) 51/2" (127.0) 61/16" (154.0) 67/16" (163.5) 7" (177.8) 73/8" (187.3) 77/8" (200.0) 813/16" (223.8)
6" (150) 51/2" (139.7) 67/16" (163.5) 615/16" (176.2) 73/8" (187.3) 715/16" (201.6) 81/2" (215.9) 91/2" (241.3)
8" (200) 615/16" (160.3) 73/8" (187.3) 715/16" (201.6) 87/16" (214.3) 815/16" (227.0) -- -- -- --
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
4” B
(101.6)
Pipe Size 0” (0.0mm) 1” (25.4mm) 11/2” (38.1mm) 2” (50.8mm) 21/2” (63.5mm) 3” (76.2mm) 4” (101.6mm)
6" (150) 67/8" (174.6) 77/8" (200.0) 83/8" (212.7) 87/8" (225.4) 93/8" (238.1) 97/8" (250.8) 1015/16" (277.8)
8" (200) 713/16" (198.4) 87/8" (225.4) 93/8" (238.1) 97/8" (250.8) 107/16" (265.1) 1015/16" (277.8) 117/8" (301.6)
10" (250) 813/16" (223.8) 97/8" (250.8) 107/16" (265.1) 1015/16" (277.8) 113/8" (288.9) 117/8" (301.6) 1213/16" (325.4)
12" (300) 93/4" (247.6) 1015/16" (277.8) 113/8" (288.9) 117/8" (301.6) 125/16" (312.7) 1213/16" (325.4) 133/4" (349.2)
14" (350) 105/16" (261.9) 113/8" (288.9) 117/8" (301.6) 125/16" (312.7) 1213/16" (325.4) 131/4" (336.5) 141/4" (361.9)
16" (400) 115/16" (287.3) 125/16" (312.7) 1213/16" (325.4) 131/4" (336.5) 133/4" (349.2) 141/4" (361.9) 151/8" (384.2)
18" (450) 121/4" (311.1) 131/4" (336.5) 133/4" (349.2) 143/16" (360.4) 1411/16" (373.1) 151/8" (384.2) 161/16" (408.0)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B
4”
(101.6)
A
213/16”
(71.4)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Size A B C D E
Part No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
2" (50) 13/4" (44.4) 83/8" (212.7) 6" (152.4) 4" (101.6) 311/16" (93.7)
21/2" (65) 13/4" (44.4) 83/8" (212.7) 6" (152.4) 4" (101.6) 315/16" (100.0)
B3117SL-2 to 31/2
3" (80) 13/4" (44.4) 83/8" (212.7) 6" (152.4) 4" (101.6) 41/4" (107.9)
31/2" (90) 13/4" (44.4) 83/8" (212.7) 6" (152.4) 4" (101.6) 41/2" (114.3)
4" (100) 21/16" (52.4) 97/8" (250.8) 6" (152.4) 41/4" (107.9) 5" (127.0)
B3117SL-4 to 6 5" (125) 21/16" (52.4) 97/8" (250.8) 6" (152.4) 41/4" (107.9) 59/16" (141.3)
6" (150) 21/16" (52.4) 97/8" (250.8) 6" (152.4) 41/4" (107.9) 61/16" (154.0)
8" (200) 37/16" (87.3) 85/8" (219.1) 8" (203.2) 5" (127.0) 813/16" (223.8)
B3117SL-8 to 10
10" (250) 37/16" (87.3) 85/8" (219.1) 8" (203.2) 5" (127.0) 97/8" (250.8)
12" (300) 37/8" (98.4) 1015/16" (277.8) 8" (203.2) 6" (152.4) 117/16" (290.5)
B3117SL-12 to 14
14" (350) 37/8" (98.4) 1015/16" (277.8) 8" (203.2) 6" (152.4) 121/16" (306.4)
16" (400) 41/4" (107.9) 123/8" (314.3) 10" (254.0) 61/2" (165.1) 135/8" (346.1)
B3117SL-16 to 20 18" (450) 41/4" (107.9) 123/8" (314.3) 10" (254.0) 61/2" (165.1) 1411/16" (373.1)
20" (500) 41/4" (107.9) 123/8" (314.3) 10" (254.0) 61/2" (165.1) 1511/16" (398.5)
B3117SL-24 24" (600) 43/8" (111.1) 131/2" (342.9) 10" (254.0) 61/2" (165.1) 1711/16" (449.3)
B3117SL-30 30" (750) 51/8" (130.2) 17" (431.8) 103/4" (273.0) 8" (203.2) 213/4" (552.4)
36" (900) 53/4" (146.0) 20" (508.0) 12" (304.8) 9" (203.2) 255/16" (642.9)
B3117SL-36 to 42
42" (1050) 53/4" (146.0) 20" (508.0) 12" (304.8) 9" (203.2) 285/16" (719.1)
Part No. in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
B3117SL-2 to 31/2 1/2" (12.7) 1" (25.4) 37/16" (87.3) 63/8" (161.9) 390 (1.73) 508 (230.4)
B3117SL-4 to 6 1/2" (12.7) 1" (25.4) 411/16" (119.1) 77/8" (200.0) 950 (4.22) 631 (286.2)
B3117SL-8 to 10 5/8" (15.9) 1" (25.4) 7" (177.8) 4" (101.6) 2100 (9.34) 1271 (576.5)
B3117SL-12 to 14 3/4" (19.0) 1" (25.4) 91/16" (230.2) 53/4" (146.0) 3075 (13.68) 1994 (904.5)
B3117SL-16 to 20 13/16" (20.6) 1" (25.4) 101/4" (260.3) 63/4" (171.4) 4980 (22.15) 3423 (1552.7)
B3117SL-24 13/16" (20.6) 1" (25.4) 113/8" (288.9) 71/2" (190.5) 6100 (27.13) 4710 (2136.4)
B3117SL-30 11/16" (27.0) 1" (25.4) 141/4" (361.9) 10" (254.0) 7500 (33.36) 7132 (3235.1)
B3117SL-36 to 42 13/16" (30.2) 1" (25.4) 17" (431.8) 12" (304.8) 12000 (53.37) 10386 (4711.1)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
2" (50) 67/8" (174.6) 6" (152.4) 43/4" (120.6) 55/8" (142.9) 37/8" (98.4)
21/2" (65) 67/8" (174.6) 6" (152.4) 5" (127.0) 57/8" (142.9) 37/8" (98.4)
B3118SL-2 to 31/2
3" (80) 67/8" (174.6) 6" (152.4) 55/16" (134.9) 63/16" (157.2) 37/8" (98.4)
31/2" (90) 67/8" (174.6) 6" (152.4) 59/16" (141.3) 67/16" (163.5) 37/8" (98.4)
4" (100) 81/8" (206.4) 6" (152.4) 63/16" (157.2) 77/16" (188.9) 51/8" (130.2)
B3118SL-4 to 6 5" (125) 81/8" (206.4) 6" (152.4) 63/4" (171.4) 8" (203.2) 51/8" (130.2)
6" (150) 81/8" (206.4) 6" (152.4) 71/4" (184.1) 81/2" (215.9) 51/8" (130.2)
8" (200) 105/8" (269.9) 8" (203.2) 101/8" (257.2) 1111/16" (296.9) 73/8" (187.3)
B3118SL-8 to 10
10" (250) 105/8" (269.9) 8" (203.2) 113/16" (284.2) 123/4" (323.8) 73/8" (187.3)
12" (300) 13" (330.2) 8" (203.2) 123/4" (323.8) 141/8" (358.8) 91/2" (241.3)
B3118SL-12 to 14
14" (350) 13" (330.2) 8" (203.2) 133/8" (339.7) 143/8" (365.1) 91/2" (241.3)
16" (400) 145/8" (371.5) 10" (254.0) 153/8" (390.5) 171/4" (438.1) 111/8" (282.6)
B3118SL-16 to 20 18" (450) 145/8" (371.5) 10" (254.0) 163/8" (415.9) 181/4" (463.5) 111/8" (282.6)
20" (500) 145/8" (371.5) 10" (254.0) 173/8" (441.3) 191/4" (488.9) 111/8" (282.6)
B3118SL-24 24" (600) 153/4" (400.0) 10" (254.0) 191/4" (488.9) 211/4" (539.7) 121/4" (311.1)
B3118SL-30 30" (750) 191/4" (488.9) 101/2" (266.7) 247/16" (620.7) 2611/16" (677.9) 153/4" (400.0)
B3118SL-2 to 31/2 1" (25.4) 1" (25.4) 390 (1.73) 1100 (498.9)
B3118SL-4 to 6 1" (25.4) 1" (25.4) 950 (4.22) 1310 (594.2)
B3118SL-8 to 10 1" (25.4) 11/8" (28.6) 2100 (9.34) 2725 (1236.0)
B3118SL-12 to 14 1" (25.4) 11/8" (28.6) 3075 (13.68) 3612 (1638.4)
B3118SL-16 to 20 1" (25.4) 11/4" (31.7) 4980 (22.15) 6384 (2895.8)
B3118SL-24 1" (25.4) 13/8" (34.9) 6100 (27.13) 8437 (3827.0)
B3118SL-30 1" (25.4) 15/8" (41.3) 7500 (33.36) 12528 (5682.7)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Structural
Pipe Size Channel A B C D
Part No. in. (mm) Size in. (mm) in. (mm) in. (mm) in. (mm)
2" (50) 43/4" (120.6) 31/16" (77.8) 115/16" (49.2) 23/4" (69.8)
21/2" (65) 43/4" (120.6) 35/16" (84.1) 23/16" (55.6) 23/4" (69.8)
B3119SL-2 to 31/2 C4 x 5.4
3" (80) 43/4" (120.6) 35/8" (92.1) 21/2" (63.5) 23/4" (69.8)
31/2" (90) 43/4" (120.6) 37/8" (98.4) 23/4" (69.8) 23/4" (69.8)
4" (100) 53/4" (146.0) 41/8" (104.8) 215/16" (74.6) 33/4" (95.2)
B3119SL-4 to 6 5" (125) C5 x 6.7 53/4" (146.0) 411/16" (119.1) 31/2" (88.9) 33/4" (95.2)
6" (150) 53/4" (146.0) 53/16" (131.8) 4" (101.6) 33/4" (95.2)
8" (200) 8" (203.2) 73/16" (182.6) 53/8" (136.5) 6" (152.4)
B3119SL-8 to 10 C6 x 8.2
10" (250) 8" (203.2) 81/4" (209.5) 67/16" (163.5) 6" (152.4)
12" (300) 10" (254.0) 913/16" (249.2) 79/16" (192.1) 8" (203.2)
B3119SL-12 to 14 C8 x 11.5
14" (350) 10" (254.0) 107/16" (265.1) 83/16" (208.0) 8" (203.2)
16" (400) 11" (279.4) 117/8" (301.6) 93/8" (238.1) 9" (228.6)
B3119SL-16 to 20 18" (450) C8 x 11.5 11" (279.4) 1215/16" (328.6) 107/16" (265.1) 9" (228.6)
20" (500) 11" (279.4) 1315/16" (354.0) 117/16" (290.5) 9" (228.6)
B3119SL-24 24" (600) C8 x 11.5 12" (304.8) 1513/16" (401.6) 135/16" (338.1) 10" (254.0)
B3119SL-30 30" (750) C10 x 15.3 141/2" (368.3) 195/8" (498.5) 165/8" (422.3) 121/2" (317.5)
Part No. in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
B3119SL-2 to 31/2 - - 13/4" (44.4) 9/16" (14.3) 390 (1.73) 314 (142.3)
B3119SL-8 to 10 3" (76.2) 21/2" (63.5) 13/16" (20.6) 2100 (9.34) 950 (430.9)
B3119SL-12 to 14 4" (101.6) 35/8" (92.1) 13/16" (20.6) 3075 (13.68) 1741 (789.7)
B3119SL-16 to 20 4" (101.6) 31/8" (79.4) 13/16" (20.6) 4980 (22.15) 2018 (915.3)
B3119SL-24 4" (101.6) 31/8" (79.4) 13/16" (20.6) 6100 (27.13) 2175 (986.6)
B3119SL-30 6" (152.4) 41/8" (104.8) 13/16" (20.6) 7500 (33.36) 3510 (1592.1)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Includes:
2 Springs
4 Cup Washers
Maximum Load at
Rod Size Free Height Spring Deflection 1" (25.4mm) Approx.
A C D Per Spring Deflection-2 Springs Wt./100 Pair
Part No. in. (mm) in. (mm) Lbs./In. (kg/mm) Lbs. (kN) Lbs. (kg)
B3264-1 3/8"-16 3" (76.2) 111/16" (42.8) 30 (0.5) 78 (.34) 100 (45.3)
B3264-5 3/4"-10 45/8" (117.5) 25/16" (58.7) 707 (12.6) 1500 (6.67) 400 (181.4)
B3264-6 1"-8 47/8" (123.8) 31/4" (82.5) 1600 (28.6) 3200 (14.23) 700 (317.5)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3114R-2 2" (50) 11/16" (27.0) 3/4" (19.0) 19/16" (39.7) 3/8" (9.5) 25/8" (66.7) 29 (13.1)
B3114R-21/2 21/2" (65) 11/4" (31.7) 7/8" (22.2) 17/8" (47.6) 1/2" (12.7) 31/8" (79.4) 47 (21.3)
B3114R-3 3" (80) 13/8" (34.9) 7/8" (22.2) 23/16" (55.6) 1/2" (12.7) 33/4" (95.2) 62 (28.1)
B3114R-31/2 31/2" (90) 11/2" (38.1) 1" (25.4) 21/2" (63.5) 1/2" (12.7) 41/4" (107.9) 71 (32.2)
B3114R-4 4" (100) 119/32" (40.5) 1" (25.4) 23/4" (69.8) 1/2" (12.7) 43/4" (120.6) 96 (43.5)
B3114R-5 5" (125) 17/8" (47.6) 11/8" (28.6) 33/8" (85.7) 5/8" (15.9) 513/16" (147.6) 131 (59.4)
B3114R-6 6" (150) 21/8" (54.0) 11/4" (31.7) 315/16" (100.0) 3/4" (19.0) 67/8" (174.6) 207 (93.9)
B3114R-8 8" (200) 25/8" (66.7) 11/2" (38.1) 51/16" (128.6) 7/8" (22.2) 87/8" (225.4) 323 (146.5)
B3114R-10 10" (250) 33/16" (81.0) 13/4" (44.4) 61/4" (158.7) 7/8" (22.2) 11" (279.4) 482 (218.6)
B3114R-12 12" (300) 33/4" (95.2) 2" (50.8) 73/8" (187.3) 1" (25.4) 13" (330.2) 854 (387.4)
B3114R-14 14" (350) 43/8" (111.1) 21/2" (63.5) 81/4" (209.5) 11/8" (28.6) 141/4" (361.9) 1150 (521.6)
B3114R-16 16" (400) 45/8" (117.5) 21/2" (63.5) 91/4" (234.9) 11/4" (31.7) 161/4" (412.7) 1200 (544.3)
B3114R-18 18" (450) 51/8" (130.2) 23/4" (69.8) 103/8" (263.5) 11/4" (31.7) 181/4" (463.5) 1550 (703.1)
B3114R-20 20" (500) 55/8" (142.9) 3" (76.2) 111/2" (292.1) 13/8" (34.9) 201/4" (514.3) 2080 (943.5)
B3114R-24 24" (600) 63/4" (171.4) 35/8" (92.1) 1313/16" (350.8) 11/2" (38.1) 241/4" (615.9) 3300 (1496.9)
B3114R-30 30" (750) 81/2" (215.9) 41/2" (114.3) 171/4" (438.1) 13/4" (44.4) 301/4" (768.3) 6200 (2812.3)
Pipe Rollers &
Pipe Supports
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Finish: Plain
A
Order By: Part number and finish. Axle Dia
B3117R-2 to 31/2 2" to 31/2" (50 to 90) 1/2" (12.7) 17/8" (47.6) 23/4" (69.8) 70 (31.7)
B3117R-4 to 6 4" to 6" (100 to 150) 1/2" (12.7) 21/16" (52.4) 33/4" (95.2) 114 (51.7)
B3117R-8 to 10 8", 10" (200 to 250) 3/4" (19.0) 31/4" (82.5) 6" (152.4) 329 (149.2)
B3117R-12 to 14 12", 14" (300 to 350) 7/8" (22.2) 4" (101.6) 8" (203.2) 600 (272.1)
B3117R-16 to 20 16" to 20" (400 to 500) 11/8" (28.6) 41/2" (114.3) 9" (228.6) 781 (354.2)
B3117R-24 24" (600) 11/4" (31.7) 47/16" (112.7) 10" (254.0) 842 (381.9)
B3117R-30 30" (750) 13/4" (44.4) 51/2" (139.7) 121/2" (317.5) 1385 (628.2)
B3117R-36 to 42 36" to 42" (900 to 1050) 2" (50.8) 6" (152.4) 147/8" (377.8) 1585 (718.9)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe supports offered in this section are designed to support pipe from a base structure where vertical
adjustment may be required. Pipe guides and slides are designed to allow longitudinal movement due to thermal
expansion and contraction of pipe. Protection shields and saddles are designed to prevent damage to pipe insulation.
Materials
Carbon Steel is used in the manufacturing of pipe supports, guides, shields and saddles. Stainless Steel and other
materials are available.
Finishes
The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and
Electro-Plated Zinc (ASTM B633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A123), Red Primer,
DURA-GREEN™ and other special coatings are available upon request.
Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may or may not be
uniformly coated with special finishes. In some cases, the hanger itself may be coated, however, the hardware may be
supplied Electro-Plated, Copper plated, or in Stainless Steel.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Applications
Standard
Temperature Type
B338 0 CT - 3
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Note: Match B3088 part number with dimension 'D' from B3090, B3094, B3095, B3096, B3097 or B3098 charts.
B3088T - Threaded Base Stand (TOLCO Fig. 316T) **Height from top of
TL
pipe to bottom of plate.
Thread Length
Size Range: 1" (25mm) thru 6" (150mm) pipe
Material: Steel Stand Pipe Size
**Specify
Function: Designed as a threaded base stand where Height H
vertical adjustment is required for pipe supports B3089, 4 Holes
B3092, and B3093.
A
Finish: Plain or Electro-Galvanized. Contact B-Line for
alternative finishes and materials. A
Order By: Part number, height and finish.
Plate Size
Note: Match B3088T part number with dimension 'D' from B3089, B3092, and B3093 charts.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Note: Match B3088 part number with dimension 'D' from B3090, B3094, B3095, B3096, B3097 or B3098 charts.
Note: Match B3088T part number with dimension 'D' from B3089, B3092, and B3093 charts.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Size Max. Pipe O.D. Thread D Steel Size Approx. Wt./100
Part No. in. (mm) in. (mm) Size A in. (mm) in. (mm) Lbs. (kg)
B3096-2 2" (50) 23/8" (60.3) 7/8"-9 1" (25) 3/8" x 2" (9.5 x 50.8) 212 (96.1)
B3096-3 3" (80) 31/2" (88.9) 7/8"-9 1" (25) 3/8" x 21/2" (9.5 x 63.5) 259 (117.5)
B3096-4 4" (100) 41/2" (114.3) 1"-8 1" (25) 3/8" x 3" (9.5 x 76.2) 370 (167.8)
B3096-5 5" (125) 59/16" (141.3) 1"-8 1" (25) 3/8" x 3" (9.5 x 76.2) 404 (183.2)
B3096-6 6" (150) 65/8" (168.3) 11/4"-7 11/4" (32) 1/2" x 31/2" (12.7 x 88.9) 714 (323.9)
B3096-8 8" (200) 85/8" (219.1) 11/4"-7 11/4" (32) 1/2" x 31/2" (12.7 x 88.9) 819 (371.5)
B3096-10 10" (250) 103/4" (273.0) 11/2"-6 11/2" (40) 1/2" x 4" (12.7 x 101.6) 1194 (541.6)
B3096-12 12" (300) 123/4" (323.8) 11/2"-6 11/2" (40) 1/2" x 4" (12.7 x 101.6) 1315 (596.5)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Note: D
Nominal pipe size of base
If combining a Figure B3089 (Pipe adjuster) with a Figure B3090 stand - not included
(Pipe Support - pages 129 & 130) the catalog number will
become a Figure B3092 (see pages 133 & 134).
If combining a Figure B3089 (Pipe adjuster) with a Figure B3095
(Pipe Support Saddle - pages 131 & 132) the catalog number
will become a Figure B3093 (see pages 135 & 136).
B3089-11/2 21/2" - 31/2" (65 - 90) 11/2" (40) 21/2" (65) 400 (181.4)
B3089-21/2 4" - 12" (100 - 300) 21/2" (65) 3" (80) 700 (317.5)
B3089-3 14" - 16" (350 - 400) 3" (80) 4" (100) 1000 (453.6)
B3089-4 18" - 36" (450 - 900) 4" (100) 6" (150) 2200 (997.9)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Note:
4" (100) thru 12" (300) fits both steel and ductile iron pipe.
For other ductile iron pipe sizes specify B3090DI - size.
3” (80) Ductile Iron uses B3090-31/2
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Steel Size
4"
(101.6) Gussets on sizes B3090-8
and larger.
B (Shank Dia.)
C
Center of pipe to * Shank will fit into nominal
bottom lip of support. Schedule 40 pipe size 'D' of
Base Stand Figure B3088
(not included).
Note: — For vertical adjustment see Figure B3092 (pages 133 & 134)
B C D* Approx. Wt./100
Part No. in. (mm) in. (mm) in. (mm) Lbs. (kg)
B3090-3/4 3/4" (19.0) 2" (50.8) 3/4" (19) 107 (48.5)
B3090-1 3/4" (19.0) 25/32" (54.8) 3/4" (19) 117 (53.1)
B3090-11/4 3/4" (19.0) 221/64" (59.1) 3/4" (19) 149 (67.6)
B3090-11/2 3/4" (19.0) 21/2" (63.5) 3/4" (19) 166 (75.3)
B3090-2 3/4" (19.0) 211/16" (68.3) 3/4" (19) 186 (84.4)
B3090-21/2 15/16" (33.3) 31/8" (79.4) 11/2" (40) 251 (113.8)
B3090-3 15/16" (33.3) 37/16" (87.3) 11/2" (40) 316 (143.3)
B3090-31/2 15/16" (33.3) 311/16" (93.7) 11/2" (40) 317 (143.8)
B3090-4 23/8" (60.3) 41/16" (103.2) 21/2" (65) 586 (265.8)
B3090-5 23/8" (60.3) 417/32" (115.1) 21/2" (65) 621 (281.7)
B3090-6 23/8" (60.3) 55/16" (134.9) 21/2" (65) 895 (406.0)
B3090-8 23/8" (60.3) 63/4" (171.4) 21/2" (65) 1115 (505.7)
B3090-10 23/8" (60.3) 713/16" (198.4) 21/2" (65) 1423 (645.5)
B3090-12 23/8" (60.3) 813/16" (223.8) 21/2" (65) 1846 (837.3)
B3090-14 27/8" (73.0) 109/16" (268.3) 3" (80) 2593 (1176.2)
B3090-16 27/8" (73.0) 119/16" (293.7) 3" (80) 2825 (1281.4)
B3090-18 4" (101.6) 139/16" (344.5) 4" (100) 4843 (2196.8)
B3090-20 4" (101.6) 149/16" (369.9) 4" (100) 5225 (2370.0)
B3090-24 4" (101.6) 169/16" (420.7) 4" (100) 6970 (3161.6)
B3090-30 4" (101.6) 2011/16" (525.5) 4" (100) 8587 (3895.0)
B3090-36 4" (101.6) 2311/16" (601.7) 4" (100) 9977 (4525.5)
Note:
4" (100) thru 12" (300) fits both steel and ductile iron pipe.
For other ductile iron pipe sizes specify B3090DI - size.
3” (80) Ductile Iron uses B3090-31/2
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Function: Designed to support horizontal pipe from floor stanchion. Gussets on sizes Shank Dia.
To complete floor stanchion, use with B3088 pipe stand. B3095-8 and larger.
C
Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, A Center of pipe to
B
Type 37 and Manufacturers Standardization Society ANSI/MSS SP-69 & bottom lip of support.
SP-58, Type 36
* Shank will fit into nominal
Maximum Temperature: 750°F (399°C) Schedule 40 pipe size 'D' of
Finish: Plain. Available in Electro-Galvanized and HDG finish or Base Stand Figure B3088
(not included).
Stainless Steel materials.
Order By: Part number and finish
Note: — For vertical adjustment see Figure B3093 (pages 135 & 136)
Note:
4" (100) thru 12" (300) fits both steel and ductile iron pipe.
For other ductile iron pipe sizes specify B3095DI - size.
3” (80) Ductile Iron uses B3095-31/2
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Note: — For vertical adjustment see Figure B3093 (pages 135 & 136)
D* E Approx. Wt./100
Part No. in. (mm) in. (mm) Lbs. (kg)
B3095-1 3/4" (20) 11/8" (28.6) 49 (22.2)
B3095-11/4 3/4" (20) 17/16" (36.5) 81 (36.7)
B3095-11/2 3/4" (20) 121/32" (42.0) 88 (39.9)
B3095-2 3/4" (20) 21/16" (52.4) 94 (42.6)
B3095-21/2 11/2" (40) 21/2" (63.5) 167 (75.7)
B3095-3 11/2" (40) 31/32" (77.0) 176 (79.8)
B3095-31/2 11/2" (40) 37/16" (87.3) 188 (85.3)
B3095-4 21/2" (65) 41/4" (107.9) 364 (165.1)
B3095-5 21/2" (65) 413/16" (122.2) 381 (172.8)
B3095-6 21/2" (65) 61/16" (154.0) 534 (242.2)
B3095-8 21/2" (65) 715/16" (201.5) 796 (361.0)
B3095-10 21/2" (65) 95/8" (244.5) 914 (414.6)
B3095-12 21/2" (65) 1111/16" (296.9) 1068 (484.4)
B3095-14 3" (80) 121/8" (308.0) 1654 (750.2)
B3095-16 3" (80) 137/8" (352.4) 1817 (824.2)
B3095-18 4" (100) 1519/32" (396.1) 2798 (1269.2)
B3095-20 4" (100) 175/16" (439.7) 3018 (1368.9)
B3095-24 4" (100) 2025/32" (527.8) 3018 (1368.9)
B3095-30 4" (100) 26" (660.4) 7624 (3458.2)
B3095-36 4" (100) 313/16" (792.2) 8877 (4026.6)
Note:
4" (100) thru 12" (300) fits both steel and ductile iron pipe.
For other ductile iron pipe sizes specify B3095DI - size.
3” (80) Ductile Iron uses B3095-31/2
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
C B
Function: Designed to support horizontal pipe from floor
Center of pipe to
stanchion where vertical adjustment is required. U-bolt Steel Size bottom of pipe reducer.
and hex nuts are provided to hold pipe securely to saddle. B
C
To complete floor stanchion, use with B3088T threaded Gussets on sizes
Center of pipe to
pipe stand. bottom lip of support.
B3092-8 and larger.
D
Approvals: Conforms to Federal Specification A Nominal pipe size of base stand -
WW-H-171E & A-A-1192A, Type 38 and Manufacturers Figure B3088T, not included.
Standardization Society ANSI/MSS SP-69 & SP-58, Type 37. D E
U-Bolt Dia.
Finish: Plain. Contact B-Line for alternative finishes and
materials.
Order By: Part number and finish
Notes: Order with B3088T for complete stanchion support.
4" (100mm) thru 12" (300mm) fits both steel and ductile iron
pipe. For other ductile iron pipe sizes specify B3092DI - size.
3” (80mm) Ductile Iron uses B3092-31/2
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Function: Designed to support horizontal pipe from Center of pipe to bottom of pipe
reducer.
floor stanchion where vertical adjustment is required.
C
U-bolt and hex nuts are provided to hold pipe Center of pipe to bottom lip of Gussets on sizes B
securely to saddle. To complete floor stanchion, use support. B3093-8 and larger.
with B3088T threaded pipe stand. A
D
Nominal pipe size of base stand -
Approvals: Conforms to Federal Specification Figure B3088T, not included.
WW-H-171E & A-A-1192A, Type 39 and
D
Manufacturers Standardization Society ANSI/MSS
SP-69 & SP-58, Type 38.
Finish: Plain. Contact B-Line for alternative finishes
and materials.
Order By: Part number and finish
Note: Order with B3088T for complete stanchion
support.
B3093-1 1" (25) 15/16" (33.3) 3/4" (20) 521/32" (143.6) 105/32" (257.9) 129/32" (48.4)
B3093-11/4 11/4" (32) 111/16" (42.9) 3/4" (20) 553/64" (148.0) 1021/64" (2262.3) 25/64" (52.8)
B3093-11/2 11/2" (40) 129/32" (48.4) 3/4" (20) 6" (152.4) 101/2" (266.7) 21/4" (58.1)
B3093-2 2" (50) 23/8" (60.3) 3/4" (20) 63/16" (157.2) 1011/16" (271.5) 27/16" (61.9)
B3093-21/2 1
2 /2" (65) 27/8" (73.0) 11/2" (40) 65/16" (160.3) 1013/16" (274.6) 29/16" (65.1)
B3093-3 3" (80) 31/2" (88.9) 11/2" (40) 65/8" (168.3) 111/8" (282.6) 27/8" (73.0)
B3093-31/2 31/2" (90) 4" (101.6) 11/2" (40) 67/8" (174.6) 113/8" (288.9) 31/8" (79.4)
B3093-4 4" (100) 47/8" (123.8) 21/2" (65) 71/4" (184.1) 113/4" (298.4) 31/2" (88.9)
B3093-5 5" (125) 59/16" (141.3) 21/2" (65) 725/32" (197.6) 129/32" (311.9) 41/32" (102.4)
B3093-6 6" (150) 7" (177.8) 21/2" (65) 87/16" (214.3) 1215/16" (328.6) 411/16" (119.1)
B3093-8 8" (200) 91/8" (231.8) 21/2" (65) 101/4" (260.3) 143/4" (374.6) 61/2" (165.1)
B3093-10 10" (250) 111/8" (282.6) 21/2" (65) 115/16" (287.3) 1513/16" (401.6) 79/16" (192.1)
B3093-12 12" (300) 131/2" (342.9) 21/2" (65) 121/8" (308.0) 165/8" (422.3) 83/8" (212.7)
B3093-14 14" (350) 14" (355.6) 3" (80) 141/2" (368.3) 19" (482.6) 103/4" (273.0)
B3093-16 16" (400) 16" (406.4) 3" (80) 151/2" (393.7) 20" (508.0) 113/4" (298.4)
B3093-18 18" (450) 18" (457.2) 4" (100) 171/4" (438.1) 213/4" (552.4) 131/2" (342.9)
B3093-20 20" (500) 20" (508.0) 4" (100) 181/4" (463.5) 223/4" (577.8) 141/2" (368.3)
B3093-24 24" (600) 24" (609.6) 4" (100) 211/2" (546.1) 26" (660.4) 173/4" (450.8)
B3093-30 30" (750) 30" (762.0) 4" (100) 245/8" (625.5) 291/8" (739.8) 207/8" (530.2)
B3093-36 36" (900) 36" (914.4) 4" (100) 275/8" (701.7) 321/8" (816.0) 237/8" (606.4)
Note:
4" (100) thru 12" (300) fits both steel and ductile iron pipe.
For other ductile iron pipe sizes specify B3093DI - size.
3” (80) Ductile Iron uses B3093-31/2
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Approx. Wt./100
D Saddle Steel Size Complete Saddle Only
Part No. in. (mm) in. (mm) Lbs. (kg) Lbs. (kg)
B3093-1 11/2" (40) 1/4" x 13/4" (6.3 x 44.4) 189 (85.7) 49 (22.2)
B3093-11/4 11/2" (40) 1/4" x 13/4" (6.3 x 44.4) 221 (100.2) 81 (36.7)
B3093-11/2 11/2" (40) 1/4" x 13/4" (6.3 x 44.4) 228 (103.4) 88 (39.9)
B3093-2 11/2" (40) 1/4" x 13/4" (6.3 x 44.4) 234 (106.1) 94 (42.6)
B3093-21/2 21/2" (65) 1/4" x 3" (6.3 x 76.2) 567 (257.2) 167 (75.8)
B3093-3 21/2" (65) 1/4" x 3" (6.3 x 76.2) 576 (261.3) 176 (79.9)
B3093-31/2 21/2" (65) 1/4" x 3" (6.3 x 76.2) 588 (266.7) 188 (85.3)
B3093-4 3" (80) 1/4" x 4" (6.3 x 101.6) 1064 (482.6) 364 (165.1)
B3093-5 3" (80) 1/4" x 4" (6.3 x 101.6) 1081 (490.3) 381 (172.8)
B3093-6 3" (80) 3/8" x 4" (9.5 x 101.6) 1234 (559.7) 534 (242.2)
B3093-8 3" (80) 3/8" x 4" (9.5 x 101.6) 1496 (678.6) 796 (361.1)
B3093-10 3" (80) 3/8" x 4" (9.5 x 101.6) 1614 (732.1) 914 (414.6)
B3093-12 3" (80) 3/8" x 4" (9.5 x 101.6) 1768 (801.9) 1068 (484.4)
B3093-14 4" (100) 3/8" x 5" (9.5 x 127.0) 2654 (1203.8) 1654 (750.2)
B3093-16 4" (100) 3/8" x 5" (9.5 x 127.0) 2817 (1277.8) 1817 (824.2)
B3093-18 6" (150) 1/2" x 5" (12.7 x 127.0) 4998 (2267.1) 2798 (1269.1)
B3093-20 6" (150) 1/2" x 5" (12.7 x 127.0) 5218 (2366.8) 3018 (1368.9)
B3093-24 6" (150) 1/2" x 6" (12.7 x 152.4) 6346 (2878.5) 4146 (1880.6)
B3093-30 6" (150) 1" x 6" (25.4 x 152.4) 9824 (4456.1) 7624 (3458.2)
B3093-36 6" (150) 1" x 6" (25.4 x 152.4) 11077 (5024.4) 8877 (4026.5)
Note:
4" (100) thru 12" (300) fits both steel and ductile iron pipe.
For other ductile iron pipe sizes specify B3093DI - size.
3” (80) Ductile Iron uses B3093-31/2
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B
floor stanchion. Top clamp holds pipe securely to
saddle. To complete floor stanchion use with B3088 'A'
pipe stand.
Gussets on sizes C
Approvals: Conforms to Federal Specification B3097-8 and larger. F
WW-H-171E & A-A-1192A, Type 38 and
Manufacturers Standardization Society
ANSI/MSS SP-69 & SP-58, Type 37.
'D' Shank Diameter
Sizes 4” (100mm) thru
Finish: Plain. Contact B-Line for alternative A
* Shank will fit into nominal 12” (300mm)
finishes and materials. Schedule 40 pipe size 'E' of
Base Stand Figure B3088
Order By: Part number, pipe size and finish (not included).
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
8”
(203.2mm)
Pipe Size Max. Pipe O.D. A Bolt Size C Use With B3088 Approx. Wt./100
Part No. in. (mm) in. (mm) in. (mm) B in. (mm) Pipe Stand Lbs. (kg)
B3098-2 2" (50) 23/4" (69.8) 6" (152.4) 7/8"-9 3/8" (9.5) 1" 210 (95.2)
B3098-21/2 1
2 /2" (650) 31/4" (82.5) 1
6 /2" (165.1) 7/8"-9 3/8" (9.5) 1" 219 (99.3)
B3098-3 3" (80) 31/2" (88.9) 63/4" (171.4) 7/8"-9 1/2" (12.7) 1" 240 (108.8)
B3098-31/2 31/2" (90) 4" (101.6) 63/4" (171.4) 7/8"-9 1/2" (12.7) 1" 240 (108.8)
B3098-4 4" (100) 47/8" (123.8) 71/2" (190.5) 1"-8 1/2" (12.7) 1" 340 (154.2)
B3098-5 5" (125) 55/8" (142.9) 73/4" (196.8) 1"-8 1/2" (12.7) 1" 360 (163.3)
B3098-6 6" (150) 7" (177.8) 83/8" (212.7) 11/4"-7 5/8" (15.9) 11/4" 580 (263.1)
B3098-8 8" (200) 91/8" (231.8) 91/2" (241.2) 11/4"-7 5/8" (15.9) 11/4" 640 (290.3)
B3098-10 10" (250) 111/8" (282.6) 10" (254.0) 11/4"-7 3/4" (19.0) 11/4" 1060 (480.8)
B3098-12 12" (300) 131/2" (342.9) 111/4" (285.7) 11/4"-7 7/8" (22.2) 11/4" 1060 (480.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
H
Gussets on sizes B
B3097-8 and larger.
B3094-4 4" (100) 67/8" (174.5) 2" (50.8) 63/8" (161.9) 23/8" (60.3) 21/2" (63.5) 3/4" (19.0) 707 (320.7)
B3094-5 5" (125) 73/8" (187.3) 2" (50.8) 71/16" (179.4) 23/8" (60.3) 21/2" (63.5) 7/8" (22.2) 775 (351.5)
B3094-6 6" (150) 73/8" (187.3) 2" (50.8) 73/4" (196.8) 23/8" (60.3) 21/2" (63.5) 7/8" (22.2) 844 (382.8)
B3094-8 8" (200) 101/8" (257.2) 2" (50.8) 99/16" (242.9) 23/8" (60.3) 21/2" (63.5) 7/8" (22.2) 1429 (648.2)
B3094-10 10" (250) 113/8" (288.8) 2" (50.8) 8" (203.2) 23/8" (60.3) 21/2" (63.5) 1" (25.4) 1250 (567.0)
B3094-12 12" (300) 127/8" (327.0) 3" (76.2) 91/2" (241.3) 23/8" (60.3) 21/2" (63.5) 1" (25.4) 1446 (655.9)
B3094-14 14" (350) 15" (381.0) 3" (76.2) 183/16" (462.0) 27/8" (73.0) 3" (76.2) 11/8" (28.6) 3149 (1429.4)
B3094-16 16" (400) 161/4" (412.7) 3" (76.2) 165/8" (422.3) 27/8" (73.0) 3" (76.2) 11/8" (28.6) 3068 (1391.6)
B3094-18 18" (450) 18" (457.2) 4" (101.6) 1711/16" (449.3) 33/4" (95.2) 4" (101.6) 11/4" (31.7) 3339 (1514.6)
B3094-20 20" (500) 191/4" (488.9) 4" (101.6) 153/4" (400.0) 33/4" (95.2) 4" (101.6) 11/4" (31.7) 2994 (1358.1)
B3094-24 24" (600) 221/2" (571.5) 4" (101.6) 183/8" (466.7) 33/4" (95.2) 4" (101.6) 13/8" (34.9) 4255 (1930.0)
B3094-30 30" (750) 257/8" (657.2) 4" (101.6) 163/8" (415.9) 33/4" (95.2) 4" (101.6) 13/8" (34.9) 5210 (2363.2)
B3094-36 36" (900) 291/2" (749.3) 4" (101.6) 171/2" (444.5) 33/4" (95.2) 4" (101.6) 15/8" (41.3) 5382 (2441.3)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Size Range:
B3195-3/8 3/8" (10) 11/8" (28.6) 11/4" (31.7) 21/4" (57.1) 1" (25) 1" (25) Rigid 4 (1.8)
B3195-1/2 1/2" (15) 13/8" (34.9) 11/4" (31.7) 21/4" (57.1) 1" (25) 1" (25) Rigid 4 (1.8)
B3195-3/4 3/4" (20) 11/2" (38.1) 11/4" (31.7) 21/4" (57.1) 11/4" (32) 11/4" (32) O.D. 6 (2.7)
B3195-1 1" (25) 113/16" (46.0) 11/4" (31.7) 21/4" (57.1) 11/2" (40) 11/2" (38) O.D. 10 (4.5)
B3195-11/4 11/4" (32) 21/8" (54.0) 11/4" (31.7) 21/4" (57.1) 2" (50) 2" (51) O.D. 10 (4.5)
B3195-11/2 11/2" (40) 23/8" (60.3) 11/4" (31.7) 21/4" (57.1) 2" (50) 2" (50) Rigid 12 (5.4)
B3195-2 2" (50) 27/8" (73.0) 11/4" (31.7) 21/4" (57.1) 21/2" (65) 21/2" (65) Rigid 14 (6.3)
B3195-21/2 1
2 /2" (65) 33/8" (85.7) 11/4" (31.7) 3" (76.2) 3" (80) 3" (76) O.D. 20 (9.1)
B3195-3 3" (80) 4" (101.6) 11/4" (31.7) 3" (76.2) 31/2" (90) 31/2" (90) Rigid 25 (11.3)
B3195-31/2 31/2" (90) 41/2" (114.3) 11/4" (31.7) 3" (76.2) 4" (100) 4" (100) Rigid 36 (16.3)
B3195-4 4" (100) 51/2" (139.7) 11/4" (31.7) 1
3 /2" (88.9) 5" (125) 5" (125) Rigid 65 (29.5)
B3195-5 5" (125) 61/2" (165.1) 11/4" (31.7) 4" (101.6) 6" (150) 6" (150) Rigid 67 (30.4)
B3195-6 6" (150) 75/8" (193.7) 21/8" (54.0) 51/2" (139.7) 8" (200) 75/8" (193) O.D. 196 (88.9)
B3195-8 8" (200) 95/8" (244.5) 21/8" (54.0) 51/2" (139.7) 10" (250) 95/8" (244) O.D. 210 (95.2)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3281 thru B3287 - Pipe Alignment Guide (TOLCO Fig. 420 thru Fig. 426)
X
Size Range: For use with 11⁄2" (40mm) thru 24" (600mm) pipe
Material: Steel
Shields & Saddles
Supports, Guides,
Order By: Part number and finish. For use with copper
tubing, add CT suffix to the part number.
Body R S T U V
Size in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
001 31/2" (88.9) 5/8" (15.9) 57/8" (149.2) 41/8" (104.8) 13/4" (44.4)
002 4" (101.6) 5/8" (15.9) 63/4" (171.4) 43/8" (111.1) 13/4" (44.4)
003 43/8" (111.1) 5/8" (15.9) 75/8" (193.7) 51/8" (130.2) 13/4" (44.4)
004 51/4" (133.3) 5/8" (15.9) 91/4" (234.9) 61/8" (155.6) 13/4" (44.4)
005 61/4" (158.7) 5/8" (15.9) 115/8" (295.3) 7" (177.8) 23/4" (69.8)
006 7" (177.8) 5/8" (15.9) 133/8" (339.7) 81/4" (209.5) 23/4" (69.8)
007 77/8" (200.0) 3/4" (19.0) 151/8" (384.2) 97/8" (250.8) 4" (101.6)
008 87/8" (225.4) 3/4" (19.0) 17" (431.8) 107/8" (276.2) 4" (101.6)
009 93/4" (247.6) 3/4" (19.0) 183/4" (476.2) 117/8" (301.6) 4" (101.6)
010 107/8" (276.2) 3/4" (19.0) 21" (533.4) 113/4" (298.4) 6" (152.4)
011 121/8" (308.0) 7/8" (22.2) 231/8" (587.4) 141/2" (368.3) 6" (152.4)
012 13" (330.2) 7/8" (22.2) 25" (635.0) 151/2" (393.7) 6" (152.4)
013 143/4" (374.6) 11/8" (28.6) 273/4" (704.8) 171/8" (435.0) 6" (152.4)
014 161/2" (419.1) 11/8" (28.6) 311/2" (800.1) 191/4" (488.9) 6" (152.4)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Insulation Thickness
Nominal 3" (76.2) 31/2" (88.9) 4" (101.6)
Pipe Size Part No. BS* SAM** Part No. BS* SAM** Part No. BS* SAM**
1/2" (15) B3285-1/2 004 4" (101.6) B3285-1/2 004 4" (101.6) B3287-1/2 005 4" (101.6)
3/4" (20) B3284-3/4 004 4" (101.6) B3286-3/4 005 4" (101.6) B3286-3/4 005 4" (101.6)
1" (25) B3284-1 004 4" (101.6) B3286-1 005 4" (101.6) B3286-1 005 4" (101.6) BS* = Body Size
11/4" (32) B3284-11/4 004 4" (101.6) B3286-11/4 005 4" (101.6) B3286-11/4 005 4" (101.6)
SAM** = Standard
11/2" (40) B3284-11/2 004 4" (101.6) B3286-11/2 005 4" (101.6) B3286-11/2 005 4" (101.6) Allowable Movement
2" (50) B3285-2 005 4" (101.6) B3285-2 005 4" (101.6) B3287-2 006 4" (101.6)
21/2" (65) B3285-21/2 005 4" (101.6) B3285-21/2 005 4" (101.6) B3287-21/2 006 4" (101.6) Note: Use 1”
3" (80) B3284-3 005 4" (101.6) B3286-3 006 4" (101.6) B3286-3 006 4" (101.6) (25.4mm) insulation
thickness column
4" (100) B3285-4 006 4" (101.6) B3286-4 006 4" (101.6) B3287-4 007 6" (152.4)
when no insulation is
5" (125) B3284-5 006 4" (101.6) B3286-5 007 6" (152.4) B3287-5 008 6" (152.4) present.
6" (150) B3285-6 007 6" (152.4) B3286-6 008 6" (152.4) B3286-6 008 6" (152.4)
8" (200) B3284-8 008 6" (152.4) B3286-8 009 6" (152.4) B3286-8 009 6" (152.4)
10" (250) B3284-10 009 6" (152.4) B3286-10 010 6" (152.4) B3286-10 010 6" (152.4)
12" (300) B3284-12 010 6" (152.4) B3286-12 011 6" (152.4) B3286-12 011 6" (152.4)
14" (350) B3285-14 011 8" (203.2) B3285-14 011 8" (203.2) B3287-14 012 8" (203.2)
16" (400) B3285-16 012 8" (203.2) B3285-16 012 8" (203.2) B3287-16 013 8" (203.2)
18" (450) B3285-18 013 8" (203.2) B3285-18 013 8" (203.2) B3287-18 014 8" (203.2)
20" (500) B3285-20 014 8" (203.2) B3285-20 014 8" (203.2) B3285-20 014 8" (203.2)
24" (600) --- --- --- --- --- --- --- --- --- --- --- ---
Installation: Attach outer housing of the first pipe guide to the structure a maximum of four pipe diameters from an expansion joint.
The second pipe guide should be located a maximum of 14 pipe diameters from the first pipe guide. The spider pipe clamp should be
offset at a minimum of half the distance in the opposite direction of the axial expansion. See chart for Standard Allowable Movement (SAM).
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Clearance
B3147A & B3147B - Pipe Anchor (TOLCO Fig. 32) U-Bolt Dia.
(dimensional charts on following page)
Size Range: For use with 1⁄2" (15mm) thru 24" (600mm) pipe
Material: Steel
B
C
Function: Recommended for anchoring pipe to structure. Type A
Finish: Plain
A
Center of pipe to
Note: 1⁄2" (15mm) thru 4" (100mm), use U-bolt to fasten chair to
bottom of base
support; 5" (125mm) thru 24" (600mm) U-bolt attaches directly plate.
to support structure.
Holes are provided in chair for fastening to support if
required. 13/16” (30.2mm) x
U-Bolt Dia.
11/16” (27.0mm)
Available in Electro-Galvanized and Hot Dip Galvanized 2 Holes
finish or Stainless Steel materials. D
B C Type B
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3147A-1/2 1/2" (15) 1/4" (6.3) 15/16" (23.8) 23/16" (55.5) 13/16" (30.2) -- (--) 80 (36.3)
B3147A-3/4 3/4" (20) 1/4" (6.3) 11/16" (27.0) 23/8" (60.3) 13/8" (34.9) -- (--) 88 (39.9)
B3147A-1 1" (25) 1/4" (6.3) 13/16" (30.2) 25/8" (66.7) 15/8" (41.3) -- (--) 96 (43.5)
B3147A-11/4 1
1 /4" (32) 3/8" (9.4) 13/8" (34.9) 27/8" (73.0) 21/16" (52.4) -- (--) 107 (48.5)
B3147A-11/2 11/2" 3/8" 19/16" 31/4" 23/8" (60.3) -- 118
Type A
(40) (9.4) (39.7) (82.5) (--) (53.5)
B3147A-2 2" (50) 3/8" (9.4) 13/4" (44.4) 35/8" (92.1) 213/16" (71.4) -- (--) 132 (59.9)
B3147A-21/2 1
2 /2" (65) 1/2" (12.7) 2" (50.8) 415/16" (125.4) 37/16" (87.3) -- (--) 175 (79.4)
B3147A-3 3" (80) 1/2" (12.7) 23/8" (60.3) 59/16" (141.3) 41/16" (103.2) -- (--) 215 (97.5)
B3147A-31/2 31/2" (90) 1/2" (12.7) 23/8" (60.3) 61/16" (154.0) 49/16" (115.9) -- (--) 240 (108.8)
B3147A-4 4" (100) 1/2" (12.7) 27/8" (73.0) 69/16" (166.7) 51/16" (128.6) -- (--) 265 (120.2)
B3147B-5 5" (125) 1/2" (12.7) 37/16" (87.3) 4" (101.6) 65/32" (156.3) 21/4" (57.1) 290 (131.5)
B3147B-6 6" (150) 5/8" (15.9) 4" (101.6) 5" (127.0) 73/8" (187.3) 3" (76.2) 315 (142.9)
B3147B-8 8" (200) 5/8" (15.9) 51/4" (133.3) 7" (177.9) 93/8" (138.0) 51/2" (139.7) 885 (401.4)
B3147B-10 10" (250) 3/4" (19.0) 67/16" (164.1) 8" (203.2) 115/8" (295.2) 51/2" (139.7) 1050 (476.3) Type B
B3147B-12 12" (300) 7/8" (22.2) 71/2" (190.5) 9" (228.6) 133/4" (349.2) 6" (152.4) 1210 (548.8)
B3147B-14 14" (350) 7/8" (22.2) 83/16" (208.0) 10" (254.0) 15" (381.0) 7" (177.9) 1480 (671.3)
B3147B-16 16" (400) 7/8" (22.2) 91/4" (234.9) 10" (254.0) 17" (431.8) 7" (177.9) 1735 (787.0)
B3147B-18 18" (450) 1" (25.4) 103/8" (263.5) 11" (279.4) 191/8" (485.8) 7" (177.9) 2011 (912.2)
B3147B-20 20" (500) 1" (25.4) 113/8" (288.9) 12" (304.8) 211/8" (536.6) 7" (177.9) 2332 (1057.8)
B3147B-24 24" (600) 1" (25.4) 135/8" (346.1) 12" (304.8) 251/8" (638.2) 8" (203.2) 2550 (1156.7)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
R R
lateral movement of pipe where pipe is anchored E
to concrete piers or other supporting structures. H
C A A 4 Holes
Finish: Plain or Electro-Galvanized C
B
Order By: Part number and finish. B
D
D
D
B3256-2 thru B3256-8 B3256-10 thru B3256-30
Pipe Size A B C D E
Part No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
B3256-2 2" (50) 15/16" (23.8) 81/8" (206.4) 57/8" (149.2) 11/2" (38.1) - -
B3256-21/2 21/2" (65) 13/16" (30.2) 85/8" (219.1) 63/8" (161.9) 11/2" (38.1) - -
B3256-3 3" (50) 11/2" (38.1) 91/4" (234.9) 7" (177.8) 11/2" (38.1) - -
B3256-31/2 31/2" (80) 13/4" (44.4) 93/4" (247.6) 71/2" (190.5) 11/2" (38.1) - -
B3256-4 4" (90) 2" (50.8) 101/4" (260.3) 8" (203.2) 11/2" (38.1) - -
B3256-5 5" (100) 29/16" (65.1) 115/16" (287.3) 91/16" (230.2) 11/2" (38.1) - -
B3256-6 6" (150) 31/16" (77.8) 139/16" (346.1) 105/8" (269.9) 3" (76.2) - -
B3256-8 8" (200) 41/16" (103.2) 153/4" (396.9) 125/8" (320.7) 3" (76.2) - -
B3256-10 10" (250) 51/8" (130.2) 183/4" (476.2) 151/4" (387.3) 21/2" (63.5) 1/2" (12.7)
B3256-12 12" (300) 61/8" (155.6) 203/4" (527.0) 171/4" (438.1) 21/2" (63.5) 1/2" (12.7)
B3256-14 14" (350) 63/4" (171.4) 22" (558.8) 181/2" (469.9) 3" (76.2) 1/2" (12.7)
B3256-16 16" (400) 73/4" (196.8) 24" (609.6) 201/2" (520.7) 3" (76.2) 1/2" (12.7)
B3256-18 18" (450) 83/4" (222.2) 26" (660.4) 221/2" (571.2) 31/2" (88.9) 1/2" (12.7)
B3256-20 20" (500) 93/4" (247.6) 28" (711.2) 241/2" (622.3) 31/2" (88.9) 1/2" (12.7)
B3256-24 24" (600) 113/4" (298.4) 32" (812.8) 281/2" (723.9) 31/2" (88.9) 1/2" (12.7)
B3256-30 30" (750) 143/4" (374.6) 38" (965.2) 341/2" (876.3) 31/2" (88.9) 1/2" (12.7)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Size A B C D
Part No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
B3257-2 2" (50) 81/8" (206.4) 57/8" (149.2) 11/8" (28.6) 11/2" (38.1)
B3257-21/2 21/2" (65) 85/8" (219.1) 63/8" (161.9) 11/8" (28.6) 11/2" (38.1)
B3257-3 3" (80) 91/4" (234.9) 7" (177.8) 11/8" (28.6) 11/2" (38.1)
B3257-31/2 31/2" (90) 93/4" (247.6) 71/2" (190.5) 11/8" (28.6) 11/2" (38.1)
B3257-4 4" (100) 101/4" (260.3) 8" (203.2) 11/8" (28.6) 11/2" (38.1)
B3257-5 5" (125) 115/16" (287.3) 91/16" (230.2) 11/8" (28.6) 11/2" (38.1)
B3257-6 6" (150) 135/8" (346.1) 105/8" (269.9) 11/2" (38.1) 3" (76.2)
B3257-8 8" (200) 155/8" (396.9) 125/8" (320.7) 11/2" (38.1) 3" (76.2)
B3257-10 10" (250) 183/4" (476.2) 151/4" (387.3) 13/4" (44.4) 11/2" (38.1)
B3257-12 12" (300) 203/4" (527.0) 171/4" (438.1) 13/4" (44.4) 11/2" (38.1)
B3257-14 14" (350) 22" (558.8) 181/2" (469.9) 13/4" (44.4) 2" (50.8)
B3257-16 16" (400) 24" (609.6) 201/2" (520.7) 13/4" (44.4) 2" (50.8)
B3257-18 18" (450) 26" (660.4) 221/2" (571.5) 13/4" (44.4) 21/2" (63.5)
B3257-20 20" (500) 28" (711.2) 241/2" (622.3) 13/4" (44.4) 21/2" (63.5)
B3257-24 24" (600) 32" (812.8) 281/2" (723.9) 13/4" (44.4) 21/2" (63.5)
B3257-30 30" (750) 38" (965.2) 341/2" (876.3) 13/4" (44.4) 21/2" (63.5)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
pads.
Finish: Black paint.
Service: Designed to support pipe where
horizontal movement from expansion and
contraction is present. Fits up to 3” (76.2mm)
insulation thickness.
Approvals: Conforms to Federal Specification
B3891 - 10 - CL WW-H-171E & A-A-1192A and Manufacturers
Standardization Society ANSI/MSS SP-69 & SP-58,
Type 35.
Base Style Travel Options Operating Temperature Rating:
1 04” (101) (except B3897) Standard Slide = Blank 400°F (204°C) maximum
2 10” (254) (except B3897) W/ End Plates = EP - Pipe Size
3 21/2” (63) (B3897 only) W/ B3140 Clamps = CL - Pipe Size Loading: Capable of supporting constant loads up
4 to 2000 Psi at 70°F (21°C).
5 † Mark shown in this document is the property of its respective owner.
6
7
Notes:
B3891, B3892 and B3893 are designed for longitudinal movement only.
B3894, B3895 and B3896 are designed for longitudinal and limited
transverse movement.
B3897 is designed for up to 5 inches (127mm) of horizontal movement in
any direction, depending on the installed position.
B3896 B3897
Options:
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Max
Pipe Travel Width P Width W Recommended Load
Size In. mm Part No. In. mm In. mm Lbs. kN
21/2” (63.5) B3897 N/A N/A 91/2" (241.3) 16000 (71.2)
B3891 4" (101.6) N/A N/A 12000 (53.4)
B3892 4" (101.6) 7" (177.8) 12000 (53.4)
B3893 4" (101.6) 7" (177.8) 12000 (53.4)
4" (127.0)
B3894 N/A N/A 6" (152.4) 12000 (53.4)
B3895 6" (152.4) 10" (254.0) 24000 (106.8)
1" to 24" B3896 6" (152.4) 10" (254.0) 24000 (106.8)
(25 to 600) B3891 4" (101.6) N/A N/A 12000 (53.4)
B3892 4" (101.6) 7" (177.8) 12000 (53.4)
B3893 4" (101.6) 7" (177.8) 12000 (53.4)
10" (254.0)
B3894 N/A N/A 6" (152.4) 12000 (53.4)
B3895 6" (152.4) 10" (254.0) 24000 (106.8)
B3896 6" (152.4) 10" (254.0) 24000 (106.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B
L
H H
17/16" 17/16"
/2"
1 1
/2"
1
/16" P 1" P 1"
/16"
1
W
W
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
17/16"
17/16"
1
/2"
1
/2" P
/16"
1
P 1
/16"
W
W 1" 1"
H
Stainless steel facing
plate on tee - filled
Teflon® on disc. 21/2" 21/2"
B
2 /2"
1
B 2 /2"
1
L
L
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3993 - 5 - 04 - CL
T-Slide
B3993-5 B3993B-5 B3991-5
H-Slide
Options:
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Max
Pipe Travel Width P Width W Recommended Load
Size In. (mm) Part No. In. (mm) In. (mm) Lbs. (kN)
B3991-5 6" (152.4) N/A N/A 16000 (71.2)
B3993-5 2" (50.8) 41/2" (114.3) 12000 (53.4)
B3993B-5 2" (50.8) 41/2" (114.3) 12000 (53.4)
4" (101.6)
B3991-10 12" (304.8) N/A N/A 32000 (142.3)
B3993-10 6" (152.4) 811/16" (220.7) 24000 (106.8)
1" to 24" B3993B-10 6" (152.4) 811/16" (220.7) 24000 (106.8)
(25 to 600) B3991-5 6" (152.4) N/A N/A 16000 (71.2)
B3993-5 2" (50.8) 41/2" (114.3) 12000 (53.4)
B3993B-5 2" (50.8) 41/2" (114.3) 12000 (53.4)
10" (254.0)
B3991-10 12" (304.8) N/A N/A 32000 (142.3)
B3993-10 6" (152.4) 811/16" (220.7) 24000 (106.8)
B3993B-10 6" (152.4) 811/16" (220.7) 24000 (106.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3993 Pipe Slide Assembly Series dimensional drawings (TOLCO Fig. 424 thru Fig. 431)
Pipe to be field
welded to
T or H slides.
P
P
W W
B3993-5 Front View
B3993-10 Front View
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe to be field
welded to
COP
H
H
9/16”∅ BOP 9/16”∅
(14) (14)
3/4” P 3/4” 3/4” P 3/4”
(19) W (19)
W
(19) (19)
C C
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Insulation Part
Thickness Number
1" (25.4mm) B3160
11/2" (38.1mm) B3161
C A C B 2" (50.8mm) B3162
21/2" (63.5mm) B3163
3" (76.2mm) B3164
4" (101.6mm) B3165
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3160-12 815/16" (227.0) 813/16" (223.8) 87/8" (225.4) 75/8" (193.7) 11/16" (27.0)
B3161-12 99/16" (242.9) 97/16" (239.7) 91/2" (241.3) 83/16" (208.0) 15/8" (41.3)
B3162-12 12" (300) 101/16" (255.6) 101/8" (257.2) 101/8" (257.2) 83/4" (222.2) 21/8" (54.0)
B3163-12 105/8" (269.9) 105/8" (269.9) 105/8" (269.9) 91/4" (234.9) 25/8" (66.7)
B3164-12 113/16" (284.2) 113/16" (284.2) 111/4" (285.7) 911/16" (246.1) 31/8" (79.4)
B3165-12 125/16" (312.7) 123/16" (309.6) 125/16" (312.7) 103/4" (273.0) 41/8" (104.8)
B3161-14 101/16" (255.6) 915/16" (252.4) 101/16" (255.6) 811/16" (220.7) 11/2" (38.1)
B3162-14 105/8" (269.9) 105/8" (269.9) 105/8" (269.9) 93/16" (233.4) 2" (50.8)
B3163-14 14" (350) 113/16" (284.2) 113/16" (284.2) 111/4" (285.7) 93/4" (247.6) 21/2" (63.5)
B3164-14 113/4" (298.4) 1111/16" (296.9) 113/4" (298.4) 101/4" (260.3) 3" (76.2)
B3165-14 127/8" (327.0) 127/16" (315.9) 127/8" (327.0) 113/16" (284.2) 4" (101.6)
B3161-16 111/8" (282.6) 111/8" (282.6) 113/16" (284.2) 911/16" (246.1) 11/2" (38.1)
B3162-16 1113/16" (300.0) 1111/16" (296.9) 113/4" (298.4) 1014" (260.3) 2" (50.8)
B3163-16 16" (400) 125/16" (312.7) 121/8" (308.0) 125/16" (312.7) 1011/16" (271.5) 21/2" (63.5)
B3164-16 127/8" (327.0) 129/16" (319.1) 127/8" (327.0) 111/4" (285.7) 3" (76.2)
B3165-16 1315/16" (354.0) 139/16" (344.5) 1315/16" (354.0) 121/4" (311.1) 4" (101.6)
B3161-18 121/4" (311.1) 121/8" (308.0) 121/4" (311.1) 1011/16" (271.5) 11/2" (38.1)
B3162-18 127/8" (327.0) 121/2" (317.5) 127/8" (327.0) 111/4" (285.7) 2" (50.8)
B3163-18 18" (450) 133/8" (339.7) 13" (330.2) 133/8" (339.7) 1111/16" (296.9) 21/2" (63.5)
B3164-18 1315/16" (354.0) 139/16" (344.5) 1315/16" (354.0) 121/4" (311.1) 3" (76.2)
B3165-18 15" (381.0) 149/16" (369.9) -- -- 131/4" (336.5) 4" (101.6)
B3161-20 133/8" (339.7) 13" (330.2) 133/8" (339.7) 1111/16" (296.9) 11/2" (38.1)
B3162-20 1315/16" (354.0) 131/2" (342.9) 1315/16" (354.0) 123/16" (309.6) 2" (50.8)
B3163-20 20" (500) 147/16" (366.7) 14" (355.6) -- -- 1211/16" (322.3) 21/2" (63.5)
B3164-20 1415/16" (379.4) 149/16" (369.9) -- -- 133/16" (350.8) 3" (76.2)
B3165-20 161/4" (412.7) 157/8" (403.2) -- -- 141/4" (361.9) 4" (101.6)
B3161-24 1511/16" (398.5) 155/16" (388.9) -- -- 1311/16" (347.7) 11/2" (38.1)
B3162-24 161/4" (412.8) 157/8" (403.2) -- -- 143/16" (360.4) 2" (50.8)
B3163-24 24" (600) 163/4" (425.4) 165/16" (414.3) -- -- 145/8" (377.8) 21/2" (63.5)
B3164-24 173/8" (441.3) 167/8" (428.6) -- -- 151/4" (387.3) 3" (76.2)
B3165-24 187/16" (468.3) 1715/16" (455.6) -- -- 161/4" (412.7) 4" (101.6)
B3161-30 -- -- 187/8" (479.4) -- -- 1611/16" (423.9) 11/2" (38.1)
B3162-30 -- -- 193/8" (492.1) -- -- 173/16" (436.6) 2" (50.8)
B3163-30 30" (750) -- -- 1915/16" (506.4) -- -- 1711/16" (449.3) 21/2" (63.5)
B3164-30 -- -- 201/2" (520.7) -- -- 183/16" (462.0) 3" (76.2)
B3165-30 -- -- 211/2" (546.1) -- -- 193/16" (487.4) 4" (101.6)
B3161-36 -- -- 221/8" (562.0) -- -- 1911/16" (500.1) 11/2" (38.1)
B3162-36 -- -- 225/8" (574.7) -- -- 203/16" (512.8) 2" (50.8)
B3163-36 36" (900) -- -- 233/16" (589.0) -- -- 2011/16" (525.5) 21/2" (63.5)
B3164-36 -- -- 2311/16" (601.7) -- -- 213/16" (538.2) 3" (76.2)
B3165-36 -- -- 2411/16" (627.1) -- -- 223/16" (563.6) 4" (101.6)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Part Part Stock Size L Shield 'I.D.' Approx. Wt./100 Pipe Hanger Size
No. No. in. (mm) in. (mm) in. (mm) Lbs. (kg) in. (mm)
B3151-1X B3153-1X 18 Ga. (1.2) 12" (304.8) 1.90 (48.2) 50 (22.7) 11/2" (40)
B3151-2X B3153-2X 18 Ga. (1.2) 12" (304.8) 2.38 (60.4) 62 (28.1) 2" (50)
B3151-3X B3153-3X 18 Ga. (1.2) 12" (304.8) 2.88 (73.1) 75 (34.0) 21/2" (65)
B3151-4X B3153-4X 18 Ga. (1.2) 12" (304.8) 3.50 (88.9) 92 (41.7) 3" (80)
B3151-5X B3153-5X 18 Ga. (1.2) 12" (304.8) 4.00 (101.6) 104 (47.2) 31/2" (90)
B3151-6X B3153-6X 18 Ga. (1.2) 12" (304.8) 4.50 (114.3) 118 (53.5) 4" (100)
B3151-7X B3153-7X 18 Ga. (1.2) 12" (304.8) 5.00 (127.0) 129 (58.5) 5" (125)
B3151-8X B3153-8X 18 Ga. (1.2) 12" (304.8) 5.56 (141.2) 147 (66.7) 5" (125)
B3151-9X B3153-9X 16 Ga. (1.5) 12" (304.8) 6.64 (168.6) 219 (99.3) 6" (150)
B3151-10X B3153-10X 16 Ga. (1.5) 12" (304.8) 7.64 (194.0) 253 (114.7) 8" (200)
B3151-11X B3153-11X 16 Ga. (1.5) 12" (304.8) 8.64 (219.4) 286 (129.7) 8" (200)
B3151-10Y -- 16 Ga. (1.5) 18" (457.2) 7.64 (194.0) 377 (171.0) 8" (200)
B3151-11Y -- 16 Ga. (1.5) 18" (457.2) 8.64 (219.4) 424 (192.3) 8" (200)
B3151-12Y -- 16 Ga. (1.5) 18" (457.2) 9.64 (244.8) 475 (215.4) 10" (250)
B3151-13Y -- 16 Ga. (1.5) 18" (457.2) 10.76 (273.3) 529 (239.9) 10" (250)
B3151-14Z -- 14 Ga. (1.9) 24" (609.6) 11.76 (298.7) 964 (437.3) 12" (300)
B3151-15Z -- 14 Ga. (1.9) 24" (609.6) 12.76 (324.1) 1045 (474.0) 12" (300)
B3151-16Z -- 14 Ga. (1.9) 24" (609.6) 14.00 (355.6) 1146 (519.8) 14" (350)
B3151-17Z -- 14 Ga. (1.9) 24" (609.6) 15.00 (381.0) 1227 (556.5) 16" (400)
B3151-18Z -- 14 Ga. (1.9) 24" (609.6) 16.00 (406.4) 1308 (593.3) 16" (400)
B3151-19Z -- 14 Ga. (1.9) 24" (609.6) 17.00 (431.8) 1393 (631.8) 18" (450)
B3151-20Z -- 12 Ga. (2.6) 24" (609.6) 18.00 (457.2) 2064 (936.2) 18" (450)
B3151-21Z -- 12 Ga. (2.6) 24" (609.6) 19.00 (482.6) 2178 (987.9) 20" (500)
B3151-22Z -- 12 Ga. (2.6) 24" (609.6) 20.00 (508.0) 2292 (1039.6) 20" (500)
B3151-23Z -- 12 Ga. (2.6) 24" (609.6) 21.00 (533.4) 2406 (1091.3) 24" (600)
B3151-24Z -- 12 Ga. (2.6) 24" (609.6) 22.00 (558.8) 2520 (1143.1) 24" (600)
B3151-25Z -- 12 Ga. (2.6) 24" (609.6) 23.00 (584.2) 2634 (1194.8) 24" (600)
B3151-26Z -- 12 Ga. (2.6) 24" (609.6) 24.00 (609.6) 2753 (1248.7) 24" (600)
B3151-27Z -- 12 Ga. (2.6) 24" (609.6) 25.00 (635.0) 2862 (1298.2) 30" (750)
B3151-28Z -- 12 Ga. (2.6) 24" (609.6) 26.00 (660.4) 2980 (1351.7) 30" (750)
B3151-29Z -- 12 Ga. (2.6) 24" (609.6) 27.00 (685.8) 3094 (1403.4) 30" (750)
B3151-30Z -- 12 Ga. (2.6) 24" (609.6) 28.00 (711.2) 3208 (1455.1) 30" (750)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Stock Size
B3155
B3155 same dimension as B3154 but with bottom tabs for centering and securing the shield to hanger.
Part Part Stock Size L Shield 'I.D.' Approx.Wt./100 Pipe Hanger Size
No. No. in. (mm) in. (mm) in. (mm) Lbs. (kg) in. (mm)
B3154-1X B3155-1X 18 Ga. (1.2) 8" (203.2) 1.90 (48.2) 36 (16.3) 11/2" (40)
B3154-2X B3155-2X 18 Ga. (1.2) 8" (203.2) 2.38 (60.4) 45 (20.4) 2" (50)
B3154-3X B3155-3X 18 Ga. (1.2) 8" (203.2) 2.88 (73.1) 54 (24.5) 21/2" (65)
B3154-4X B3155-4X 18 Ga. (1.2) 8" (203.2) 3.50 (88.9) 66 (29.9) 3" (80)
B3154-5X B3155-5X 18 Ga. (1.2) 8" (203.2) 4.00 (101.6) 75 (34.0) 31/2" (90)
B3154-6X B3155-6X 18 Ga. (1.2) 8" (203.2) 4.50 (114.3) 84 (38.1) 4" (100)
B3154-7X B3155-7X 18 Ga. (1.2) 8" (203.2) 5.00 (127.0) 93 (42.2) 5" (125)
B3154-8X B3155-8X 18 Ga. (1.2) 8" (203.2) 5.56 (141.2) 105 (47.6) 5" (125)
B3154-9X B3155-9X 18 Ga. (1.2) 8" (203.2) 6.64 (168.6) 126 (57.1) 6" (150)
B3154-10Z B3155-10Z 18 Ga. (1.2) 12" (304.8) 7.64 (194.0) 218 (98.9) 8" (200)
B3154-11Z B3155-11Z 18 Ga. (1.2) 12" (304.8) 8.64 (219.4) 247 (112.0) 8" (200)
B3154-12Z B3155-12Z 18 Ga. (1.2) 12" (304.8) 9.64 (244.8) 273 (123.8) 10" (250)
B3154-13Z B3155-13Z 18 Ga. (1.2) 12" (304.8) 10.76 (273.3) 304 (137.9) 10" (250)
B3154-14Z B3155-14Z 18 Ga. (1.2) 12" (304.8) 11.76 (298.7) 332 (150.6) 12" (300)
B3154-15Z B3155-15Z 18 Ga. (1.2) 12" (304.8) 12.76 (324.1) 360 (163.3) 12" (300)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Built-In
Clevis Shield Inside Approx. Clevis
Note: For Shock Indicator Shock Indicator
Part Opening Wt./100 Hanger
sizes and information,
Number in. (mm) lbs. (kg) Size
contact the B-Line
BPH250G 2.34” (59) 28.1 (12.7) B3100-2 Engineering
BPH350G 3.45” (87) 40.6 (18.4) B3100-3 Department.
BPH450G 4.50” (114) 56.2 (25.5) B3100-4
BPH550G 5.53” (140) 74.2 (33.6) B3100-5
BPH650G 6.64” (168) 86.7 (39.3) B3100-6
BPH850G 8.64” (219) 150.0 (68.0) B3100-8
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Features:
• Ideal for horizontal pipe runs.
• Offers maximum protection for insulated pipe.
• Snaps directly onto channel.
• Shield length is 12” (304.8mm).
• Fast, easy installation – no tools required.
• Snap-on design eliminates shield movement, preventing insulation damage that can lead to costly leaks.
• Allows pipe to expand without damaging the insulation.
• Protects insulation from damage caused by rubbing against other pipes and fittings.
• Designed for side-by-side installations.
• The most reliable, durable, and cost-effective way to protect your insulation.
• Patent Pending.
Order By: Part number.
Technical Specifications
Applications: Refrigeration, Air Conditioning, and Plumbing
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
The TOLCO™ seismic bracing products are the most complete line of bracing components in the industry.
Our offering includes both rigid and cable bracing systems and many components are multi-size adaptable or
universal in application.
The TOLCO brand has a history of over 40 years in seismic bracing of non-structural systems including fire
sprinklers, plumbing, mechanical, HVAC and electrical. In addition to the products shown in this catalog we also
offer engineered solutions for any seismic bracing application.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Seismic Bracing
with the "bracing pipe" and TOLCO transitional and structural attachment
component(s) to form a complete bracing assembly. NFPA 13 and/or OSHPD
guidelines should be followed.
To Install: Place the Fig. 4A over the pipe to be braced. Attach TOLCO C
transitional fitting, either Fig. 980, 910 or 909, to the clamp ears. Tighten bolts
and nuts; torque requirement is a minimum of 50 ft./lbs. (68Nm). HHCS and Hex Nuts Included
Transitional fitting attachment can pivot for adjustment to proper brace angle.
Finish: Plain. Contact B-Line for alternative finishes and materials.
Order By: Figure number, pipe size and finish
4A-4 4" (100) 81/2" (215.9) 9/16" (14.3) 33/8" (85.7) 311/16" (93.7) 1/2"-13 1600 (7.11) 221 (100.2)
4A-5 5" (125) 93/4" (247.6) 9/16" (14.3) 37/8" (98.4) 43/8" (111.1) 1/2"-13 1600 (7.11) 253 (114.7)
4A-6 6" (150) 111/2" (292.1) 5/8" (15.9) 5" (127.0) 51/8" (130.2) 1/2"-13 2015 (8.96) 513 (232.7)
4A-8 8" (200) 131/4" (336.5) 3/4" (19.0) 611/16" (169.9) 61/8" (155.6) 1/2"-13 2015 (8.96) 601 (272.6)
Eaton’s B-Line Business seismic bracing components are designed to be compatible only with other B-Line bracing components,
resulting in a listed seismic bracing assembly. B-Line’s warranty for seismic bracing components will be the warranty provided in
B-Line’s standard terms and conditions of sale made available by B-Line, except that, in addition to the other exclusions from
B-Line’s warranty, Eaton’s B-line Business makes no warranty relating to B-Line’s seismic bracing components that are combined
with products not provided by Eaton’s B-Line Business.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
D
Standard Finish: Plain or Electro-Plated, Contact B-Line for alternative
finishes and materials.
Ordering: Specify part number and finish.
Seismic Bracing
Fig. 4B
Hanger/Longitudinal Brace
Pipe Size Rod Size B C D Bolt Size Design Load Approx. Wt./100
Part No. in. (mm) A in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
4B-3/4 3/4" (20) 3/8"-16 1" (25.4) 27/8" (73.0) 25/8" (66.7) 5/16"-18 330 (1.47) 56 (25.4)
4B-1 1" (25) 3/8"-16 1" (25.4) 31/4" (82.5) 215/16" (74.6) 5/16"-18 330 (1.47) 60 (27.2)
4B-11/4 11/4" (32) 3/8"-16 1" (25.4) 39/16" (90.6) 31/4" (82.5) 5/16"-18 330 (1.47) 74 (33.5)
4B-11/2 11/2" (40) 3/8"-16 1" (25.4) 313/16" (96.8) 37/16" (87.3) 5/16"-18 330 (1.47) 79 (35.8)
4B-2 2" (50) 3/8"-16 11/2" (38.1) 51/8" (130.2) 45/8" (117.5) 5/16"-18 440 (1.78) 156 (70.7)
4B-21/2 21/2" (65) 1/2"-13 13/4" (44.4) 55/8" (142.9) 53/8" (136.5) 3/8"-16 440 (1.78) 176 (79.8)
4B-3 3" (80) 1/2"-13 17/8" (47.6) 63/4" (171.4) 61/8" (155.5) 3/8"-16 660 (2.93) 198 (89.9)
4B-31/2 31/2" (90) 1/2"-13 2" (50.8) 71/4" (184.1) 63/4" (171.4) 3/8"-16 660 (2.93) 219 (99.3)
4B-4 4" (100) 5/8"-11 2" (50.8) 85/8" (219.1) 71/4" (184.1) 2/2"-13 800 (3.56) 288 (130.6)
4B-5 5" (125) 5/8"-11 2" (50.8) 97/8" (250.8) 85/16" (211.1) 5/8"-11 980 (4.36) 390 (176.9)
4B-6 6" (150) 3/4"-10 21/8" (54.0) 1015/16" (277.8) 91/2" (241.3) 5/8"-11 980 (4.36) 448 (203.2)
4B-8 8" (200) 7/8"-9 21/8" (54.0) 137/16" (341.2) 111/2" (292.1) 3/4"-10 1200 (5.34) 691 (313.4)
Eaton’s B-Line Business seismic bracing components are designed to be compatible only with other B-Line bracing components,
resulting in a listed seismic bracing assembly. B-Line’s warranty for seismic bracing components will be the warranty provided in
B-Line’s standard terms and conditions of sale made available by B-Line, except that, in addition to the other exclusions from
B-Line’s warranty, Eaton’s B-line Business makes no warranty relating to B-Line’s seismic bracing components that are combined
with products not provided by Eaton’s B-Line Business.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Seismic Bracing
OSHPD guidelines should be followed.
To Install: Place the Fig. 4L over the pipe to be braced and tighten
bolts. Then engage "bracing pipe" into jaw opening and tighten set screw C
until head snaps off. Jaw attachment can pivot for adjustment to proper
brace angle.
Finish: Plain. Contact B-Line for alternative finishes and materials.
Order By: Figure number, pipe size and finish.
Longitudinal
Brace
4-Way Riser Brace
(plan view)
4L-2 2" (50) 53/8" (136.5) 21/16" (52.4) 21/16" (52.4) 1/2"-13 2015 (8.96) -- (--) 247 (112.0)
4L-21/2 21/2" (65) 67/16" (163.5) 21/2" (63.5) 23/4" (69.8) 1/2"-13 2015 (8.96) 3000 (13.34) 253 (114.7)
4L-3 3" (80) 7" (177.8) 23/4" (69.8) 31/16" (77.8) 1/2"-13 2015 (8.96) 1550 (6.89) 268 (121.5)
4L-4 4" (100) 81/2" (215.9) 33/8" (85.7) 311/16" (93.7) 1/2"-13 2015 (8.96) 1550 (6.89) 348 (157.8)
4L-5 5" (125) 93/4" (247.6) 37/8" (98.4) 43/8" (111.1) 1/2"-13 2015 (8.96) 1450 (6.45) 380 (172.3)
4L-6 6" (150) 111/2" (292.1) 5" (127.0) 51/8" (130.2) 1/2"-13 2015 (8.96) 1450 (6.45) 640 (290.3)
4L-8 8" (200) 131/4" (336.5) 55/8" (142.8) 55/8" (142.9) 1/2"-13 2015 (8.96) 1450 (6.45) 728 (330.2)
Eaton’s B-Line Business seismic bracing components are designed to be compatible only with other B-Line bracing components,
resulting in a listed seismic bracing assembly. B-Line’s warranty for seismic bracing components will be the warranty provided in
B-Line’s standard terms and conditions of sale made available by B-Line, except that, in addition to the other exclusions from
B-Line’s warranty, Eaton’s B-line Business makes no warranty relating to B-Line’s seismic bracing components that are combined
with products not provided by Eaton’s B-Line Business.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
C
sprinkler applications NFPA 13 guidelines should be followed.
To Install: Place the Fig. 4LA pipe clamp component over the pipe to be
braced and tighten down the break-off nuts until the hex head portion
breaks off to verify correct installation torque. Next engage brace member 4LA-1 thru 4LA-4
(pipe or strut) with jaw component and tighten break-off head bolt
until the hex head breaks off to verify correct installation torque. Pivot jaw
for correct angle and attach to structure using TOLCO brand transitional
attachment and structural attachment.
Finish: Plain or Electro-Galvanized. Contact B-Line
for alternative finishes and materials.
Order By: Figure number, pipe size and finish.
D
A
Pipe Approx.
Part Size A C D Bolt Size Wt./100
No. in. (mm) in. (mm) in. (mm) in. (mm) lbs. (kg)
4LA-1 1" (25) 319/32" (91.2) 15/16" (33.5) 15/16" (33.5) 3/8"-16 119 (54.0)
4LA-11/4 11/4" (32) 329/32" (99.3) 13/8" (35.3) 13/8" (35.3) 3/8"-16 123 (55.8)
4LA-11/2 11/2" (40) 45/32" (105.7) 11/2" (38.5) 11/2" (38.5) 3/8"-16 127 (57.6)
4LA-2 2" (50) 511/32" (135.6) 21/32" (51.9) 21/16" (51.9) 3/8"-16 142 (64.4)
4LA-21/2 21/2" (65) 527/32" (148.7) 25/16" (58.5) 25/16" (58.5) 3/8"-16 173 (78.5)
4LA-3 3" (80) 61/2" (164.9) 25/8" (66.6) 25/8" (66.6) 3/8"-16 187 (84.8)
4LA-31/2 31/2" (90) 7.407" (188.1) 27/8" (73.1) 27/8" (73.1) 3/8"-16 198 (89.8)
4LA-4 4" (100) 713/32" (190.8) 31/8" (79.5) 31/8" (79.5) 3/8"-16 209 (94.8)
4LA-5 5" (125) 83/4" (222.3) 35/8" (92.1) 35/8" (92.1) 1/2"-13 298 (135.2)
4LA-6 6" (150) 105/8" (269.9) 49/16" (115.9) 49/16" (115.9) 1/2"-13 521 (236.3)
4LA-8 8" (200) 1213/16" (325.5) 59/16" (143.7) 521/32" (143.7) 1/2"-13 629 (285.3)
4LA-10 10" (250) 161/2" (419.1) 71/4" (184.2) 71/4" (184.2) 1/2"-13 1320 (598.7)
4LA-12 12" (300) 181/2" (469.9) 81/4" (209.6) 81/4" (209.6) 1/2"-13 1496 (678.6)
Eaton’s B-Line Business seismic bracing components are designed to be compatible only with other B-Line bracing components,
resulting in a listed seismic bracing assembly. B-Line’s warranty for seismic bracing components will be the warranty provided in
B-Line’s standard terms and conditions of sale made available by B-Line, except that, in addition to the other exclusions from
B-Line’s warranty, Eaton’s B-line Business makes no warranty relating to B-Line’s seismic bracing components that are combined
with products not provided by Eaton’s B-Line Business.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Longitudinal Lateral
Brace Brace
Seismic Bracing
Longitudinal Loads FM Max. Design Load UL Max. Rec.
Part Pipe Size 30°-44° 45°-59° 60°-74° 75°-90° Load
No. in. (mm) lbs. (kN) lbs. (kN) lbs. (kN) lbs. (kN) lbs. (kN)
4LA-1 1" (25) 680 (3.02) 970 (4.31) 1190 (5.29) 1320 (5.87) 1000 (4.45)
4LA-11/4 11/4" (32) 680 (3.02) 970 (4.31) 1190 (5.29) 1320 (5.87) 1000 (4.45)
4LA-11/2 11/2" (40) 680 (3.02) 970 (4.31) 1190 (5.29) 1320 (5.87) 1000 (4.45)
4LA-2 2" (50) 680 (3.02) 860 (3.82) 1030 (4.58) 1150 (5.11) 1000 (4.45)
4LA-2 ½ 21/2" (65) 680 (3.02) 970 (4.31) 1190 (5.29) 1320 (5.87) 1000 (4.45)
4LA-3 3" (80) 680 (3.02) 970 (4.31) 1190 (5.29) 1320 (5.87) 1000 (4.45)
4LA-3 ½ 31/2" (90) 680 (3.02) 970 (4.31) 1190 (5.29) 1320 (5.87) 1000 (4.45)
4LA-4 4" (100) 680 (3.02) 970 (4.31) 1190 (5.29) 1320 (5.87) 1000 (4.45)
4LA-5 5" (125) - - - - - - - - 1600 (7.11)
4LA-6 6" (150) 1620 (7.20) 2,260 (10.05) 2010 (8.94) 2220 (9.87) 1600 (7.11)
4LA-8 8" (200) 1620 (7.20) 1,660 (7.38) 1570 (6.98) 1740 (7.74) 2015 (8.96)
4LA-10 10" (250) 1620 (7.20) 1,660 (7.38) 1570 (6.98) 1740 (7.74) 2765 (12.30)
4LA-12 12" (300) 1620 (7.20) 1,660 (7.38) 1570 (6.98) 1740 (7.74) - -
Eaton’s B-Line Business seismic bracing components are designed to be compatible only with other B-Line bracing components,
resulting in a listed seismic bracing assembly. B-Line’s warranty for seismic bracing components will be the warranty provided in
B-Line’s standard terms and conditions of sale made available by B-Line, except that, in addition to the other exclusions from
B-Line’s warranty, Eaton’s B-line Business makes no warranty relating to B-Line’s seismic bracing components that are combined
with products not provided by Eaton’s B-Line Business.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Fits Beam
Part No. Flange Width
in. (mm)
800-1 4”- 6” (101.6-152.4)
800-2 6”-8” (152.4-203.2)
800-3 8”-10” (203.2-254.0)
800-4 10”-12” (254.0-304.8) Shown with Fig. 980 Shown with
800-5 12”-14” (304.8-355.6) brace fitting to Fig. 980 brace
pipe brace fitting to pipe brace
800-6 14”-16” (255.6-406.4)
(Across Beam) (Along Beam)
800-7 16”-18” (406.4-457.2)
Fits Beam Flange Max. Design Loads (cULus) Max. Design Load (FM)
Type Thickness Along Beam Across Beam Lateral - Parallel to Structural Member Longitudinal - Perpendicular to Structural Member
30°-44° 45°-59° 60°-74° 75°-90° 30°-44° 45°-59° 60°-74° 75°-90°
in. (mm) lbs./(kN) lbs./(kN) lbs./(kN) lbs./(kN) lbs./(kN) lbs./(kN) lbs./(kN) lbs./(kN) lbs./(kN) lbs./(kN)
1 Up to 3/4” (Up to 19.0) 1265 2015 1430 1970 1980 NR 930 1310 1610 1800
(5.62) (8.96) (6.36) (8.76) (8.81) (NR) (4.13) (5.82) (7.16) (8.00)
Eaton’s B-Line Business seismic bracing components are designed to be compatible only with other B-Line bracing components,
resulting in a listed seismic bracing assembly. B-Line’s warranty for seismic bracing components will be the warranty provided in
B-Line’s standard terms and conditions of sale made available by B-Line, except that, in addition to the other exclusions from
B-Line’s warranty, Eaton’s B-line Business makes no warranty relating to B-Line’s seismic bracing components that are combined
with products not provided by Eaton’s B-Line Business.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Seismic Bracing
fasteners. Permits secure non-friction connection without
drilling or welding. Unique design reinforces point of connection to joist. Break off head
set screw design assures verification of proper installation torque (min. 31 ft.-lbs.). Set Screws &
Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL). Hardware Included
Approved by Factory Mutual Engineering (FM). Included in our Seismic Restraints
Catalog approved by the State of California Office of Statewide Health Planning and
Maximum Design Load 2015 lbs. (8.96kN)
Development (OSHPD). For additional load, spacing and placement information
relating to OSHPD projects, please refer to the TOLCO Seismic Restraint Systems
Guidelines. UL Listed as Hanger Attachment for
6” (150mm) Pipe at Maximum Spacing
Installation Instructions: Fig. 825 is the structural attachment component
of a longitudinal or lateral sway brace assembly. It is intended to be combined
with a TOLCO transitional attachment, "bracing pipe" and a TOLCO "braced pipe"
attachment, to form a complete bracing assembly. NFPA 13 and/or OSHPD guidelines
should be followed.
To Install: Place the Fig. 825 on the steel beam, tighten the cone point set screws
until heads break off. Attach other TOLCO
1”
transitional attachment fitting, Fig. 909, (25.4mm) 1/2”Bolt & Nut
910, 980 or 986. Transitional fitting
Max. Top View Furnished
attachment can pivot for adjustment to
6” (152.4mm)
proper brace angle. Bar joist shown attached to
various roof materials
Finish: Plain, Electro-Galvanized and Shown with
HDG Fig. 910
Approx. Wt./100: 247.5 Lbs. (112.2kg) Shown with Fig. Fig. 1000
Fig. 910 825
Order By: Figure number and finish
US Patent #6,098,942,
May pivot in any
Canada Patent #2,286,659 direction
Front View May pivot in any
direction
Side View
Eaton’s B-Line Business seismic bracing components are designed to be compatible only with other B-Line bracing components,
resulting in a listed seismic bracing assembly. B-Line’s warranty for seismic bracing components will be the warranty provided in
B-Line’s standard terms and conditions of sale made available by B-Line, except that, in addition to the other exclusions from
B-Line’s warranty, Eaton’s B-line Business makes no warranty relating to B-Line’s seismic bracing components that are combined
with products not provided by Eaton’s B-Line Business.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Shown with
May pivot in any
Fig. 980
direction
Eaton’s B-Line Business seismic bracing components are designed to be compatible only with other B-Line bracing components,
resulting in a listed seismic bracing assembly. B-Line’s warranty for seismic bracing components will be the warranty provided in
B-Line’s standard terms and conditions of sale made available by B-Line, except that, in addition to the other exclusions from
B-Line’s warranty, Eaton’s B-line Business makes no warranty relating to B-Line’s seismic bracing components that are combined
with products not provided by Eaton’s B-Line Business.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Seismic Bracing
Approvals: Underwriters Laboratories Listed in the USA (UL) and
Canada (cUL). Factory Mutual Approved (FM).
Installation Instructions: The Fig. 828 is the structural attachment Cone Point Set
component of a longitudinal or lateral sway brace assembly. It is intended Screw B
to be combined with a TOLCO transitional attachment, "bracing pipe" and a TOLCO
"braced pipe" attachment to form a complete bracing assembly. NFPA 13 and/or UL Horizontal Design Load
OSHPD guidelines should be followed. Maximum Design Load Across Beam
To Install: Place the Fig. 828 on the flange of the beam, truss, or girder. Be sure the 2015 lbs. (8.96kN)
attachment is fully engaged to the rear of the opening. Tighten the cone point Maximum Design Load Along Beam
set screws (A) until the heads break off. Tighten the cone point set screw (B) until the
2015 lbs. (8.96kN)
head breaks off. Remove the flange nut from set screw (B). Install a TOLCO swivel
fitting (Fig, 909, 910, 980, 986). Use flange nut to secure the swivel fitting.
Finish: Plain or Electro-Galvanized
Approx. Weight/100: 275 Lbs. (124.7kg)
Order By: Figure number and finish
Patent #6,098,942, #8,534,625
Canada Patent #2,286,659
Patent Pending
Eaton’s B-Line Business seismic bracing components are designed to be compatible only with other B-Line bracing components,
resulting in a listed seismic bracing assembly. B-Line’s warranty for seismic bracing components will be the warranty provided in
B-Line’s standard terms and conditions of sale made available by B-Line, except that, in addition to the other exclusions from
B-Line’s warranty, Eaton’s B-line Business makes no warranty relating to B-Line’s seismic bracing components that are combined
with products not provided by Eaton’s B-Line Business.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
906 12” (305.0) 9” (228.6) 2” (50.8) 1/4” (6.3) Specify Specify 307 (139.3)
Eaton’s B-Line Business seismic bracing components are designed to be compatible only with other B-Line bracing components,
resulting in a listed seismic bracing assembly. B-Line’s warranty for seismic bracing components will be the warranty provided in
B-Line’s standard terms and conditions of sale made available by B-Line, except that, in addition to the other exclusions from
B-Line’s warranty, Eaton’s B-line Business makes no warranty relating to B-Line’s seismic bracing components that are combined
with products not provided by Eaton’s B-Line Business.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Seismic Bracing
Approvals: Included in our Seismic Restraints Catalog approved by the State
of California Office of Statewide Health Planning and Development (OSHPD). For
additional load, spacing and placement information relating to OSHPD projects,
please refer to the TOLCO Seismic Restraint Systems Guidelines.
B Set Screws
Installation Instructions: Fig. 907 is a transitional component of a Included
longitudinal 4-way sway brace assembly. It is intended to be installed with the
longitudinal and lateral "bracing pipes", TOLCO structural attachment fittings,
Fig. 909, 910 and 980 and the Fig. 1000 TOLCO "braced pipe" fitting, to form a
complete bracing assembly.
NFPA 13 and/or OSHPD guidelines should be followed.
To Install: Attach the Fig. 907 over the lateral "bracing pipe" to within 3" (76.2mm)
of its position relative to the "braced pipe" connection. Adjust brace angle and
tighten set screws until the heads bottom out on surface.
Finish: Plain. Contact B-Line for alternative finishes and materials.
Order By: Figure number, bracing pipe sizes and finish.
Shown
With
Fig. 909
Fig. 907
Shown
With
Fig. 980
Fig. 1000
Part Number Brace Pipe Size A B Max. Design Load Approx. Wt./100
in. (mm) in. (mm) in. (mm) lbs. (kN) lbs. (kg)
907-1 X 1 1” x 1” (25 x 25) 43/4” (120.6) 43/4” (120.6) 655* (2.91) 103 (46.7)
907-1 X 11/4 1” x 11/4” (25 x 32) 53/16” (128.6) 413/16” (122.2) 655* (2.91) 107 (48.5)
907-11/4 X 11/4 11/4” x 11/4” (32 x 32) 53/8” (136.5) 51/4” (133.1) 655* (2.91) 109 (49.4)
* Load will accommodate up to 4” (100mm) pipe at maximum spacing.
Eaton’s B-Line Business seismic bracing components are designed to be compatible only with other B-Line bracing components,
resulting in a listed seismic bracing assembly. B-Line’s warranty for seismic bracing components will be the warranty provided in
B-Line’s standard terms and conditions of sale made available by B-Line, except that, in addition to the other exclusions from
B-Line’s warranty, Eaton’s B-line Business makes no warranty relating to B-Line’s seismic bracing components that are combined
with products not provided by Eaton’s B-Line Business.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton’s B-Line Business seismic bracing components are designed to be compatible only with other B-Line bracing components,
resulting in a listed seismic bracing assembly. B-Line’s warranty for seismic bracing components will be the warranty provided in
B-Line’s standard terms and conditions of sale made available by B-Line, except that, in addition to the other exclusions from
B-Line’s warranty, Eaton’s B-line Business makes no warranty relating to B-Line’s seismic bracing components that are combined
with products not provided by Eaton’s B-Line Business.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Seismic Bracing
only on concentric loading. Universal swivel design allows Fig. 910 to be
attached at any surface angle. C
F
Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada Mounting Hardware
(cUL). Included in our Seismic Restraints Catalog approved by the State of Is Not Included
California Office of Statewide Health Planning and Development (OSHPD,
OPA-0300). For additional load, spacing and placement information relating
to OSHPD projects, please refer to the TOLCO Seismic Restraint Systems
Guidelines.
Installation Instructions: Fig. 910 is a structural or transitional attachment
component of a longitudinal or lateral sway brace assembly. It is intended to
be combined with the "bracing pipe", and TOLCO "braced pipe" attachment,
Fig. 1000, Fig. 1001, Fig. 4A, Fig. 4L or Fig. 4LA to form a complete bracing
assembly. Follow NFPA 13 and/or OSHPD guidelines.
To Install: Thread the pipe into the Fig. 910 until pipe threads are visible
through inspection site hole. Attachment can pivot for adjustment to proper
brace angle.
Note: Fig. 910 swivel attachment and Fig. 1001, Fig. 1000, Fig. 4A Fig. 4L, or
Fig. 4LA pipe clamps make up a sway brace system of (UL) Listed attachments
and bracing materials which satisfies the requirements of Underwriters
Laboratories and the National Fire Protection Association (NFPA).
Finish: Pre-Galvanized. Contact B-Line for alternative finishes and materials.
Order By: Figure number, pipe size, fastener attachment size, and finish.
Lateral Brace
910-1 X 1/2 1” (25) 2” (50.8) 11/2” (38.1) 3” (76.2) 9/16” (14.3) 25/16” (58.7) 2” (50.8) 1600 (8.96) 88 (39.9)
910-1 X 5/8 1” (25) 2” (50.8) 11/2” (38.1) 3” (76.2) 11/16” (17.5) 25/16” (58.7) 2” (50.8) 1600 (8.96) 87 (39.4)
910-1 X 3/4 1” (25) 2” (50.8) 11/2” (38.1) 3” (76.2) 13/16” (20.6) 25/16” (58.7) 2” (50.8) 1600 (8.96) 86 (39.0)
Eaton’s B-Line Business seismic bracing components are designed to be compatible only with other B-Line bracing components,
resulting in a listed seismic bracing assembly. B-Line’s warranty for seismic bracing components will be the warranty provided in
B-Line’s standard terms and conditions of sale made available by B-Line, except that, in addition to the other exclusions from
B-Line’s warranty, Eaton’s B-line Business makes no warranty relating to B-Line’s seismic bracing components that are combined
with products not provided by Eaton’s B-Line Business.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Lateral Brace
975-1/2 1” (25) 4” (101.6) 31/2” (88.9) 11/2” (38.1) 9/16” (14.3) 2015 (8.96) 88 (39.9)
975-5/8 1” (25) 4” (101.6) 31/2” (88.9) 11/2” (38.1) 11/16” (17.5) 2015 (8.96) 87 (39.4)
975-3/4 1” (25) 4” (101.6) 31/2” (88.9) 11/2” (38.1) 13/16” (20.6) 2015 (8.96) 86 (39.0)
Eaton’s B-Line Business seismic bracing components are designed to be compatible only with other B-Line bracing components,
resulting in a listed seismic bracing assembly. B-Line’s warranty for seismic bracing components will be the warranty provided in
B-Line’s standard terms and conditions of sale made available by B-Line, except that, in addition to the other exclusions from
B-Line’s warranty, Eaton’s B-line Business makes no warranty relating to B-Line’s seismic bracing components that are combined
with products not provided by Eaton’s B-Line Business.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Size Range: One size fits bracing pipe 1" (25mm) thru 2" (50mm), Cooper
B-Line 12 gauge (2.6mm) channel, and all structural steel up to 1/4" (31.7mm) thick.
Material: Steel
Function: Multi-functional attachment to structure or braced pipe fitting.
980
Features: This product’s design incorporates a concentric attachment Set Screw
D
opening which is critical to the performance of structural seismic connections. Included
NFPA 13 (2010) 9.3.5.8.4 indicates clearly that fastener table load values are Mounting Hardware
based only on concentric loading. Mounts to any surface angle. Break off bolt Is Not Included
A
head assures verification of proper installation.
Seismic Bracing
B
Installation: Fig.980 is the structural or transitional attachment component
of a longitudinal or lateral sway brace assembly. It is intended to be combined
with the "bracing pipe" and TOLCO "braced pipe" attachment, Fig. 1000, 1001,
2002, 4L, 4A or 4B to form a complete bracing assembly. NFPA 13 and/or
OSHPD guidelines should be followed.
To Install: Place the Fig. 980 onto the "bracing pipe". Tighten the set screw
until the head breaks off. Attachment can pivot for adjustment to proper brace
angle.
Approvals: —Underwriters Laboratories Listed in the USA (UL) and
Canada (cUL). Approved by Factory Mutual Engineering (FM). Included in our D
Seismic Restraints Catalog approved by the State of California Office of
Statewide Health Planning and Development (OSHPD). For additional load, 980H
spacing and placement information relating to OSHPD projects, please refer to
the TOLCO Seismic Restraint Systems Guidelines. A
Note: Fig. 980 Swivel Attachment and Fig. 1001, Fig. 1000, Fig. 2002, B
Fig. 4A, Fig. 4B or Fig. 4L pipe clamps make up a sway brace system of UL
Listed attachments and bracing materials which satisfies the requirements of
Underwriters Laboratories and the National Fire Protection Association (NFPA)
Finish: Plain, Electro-Galvanized or Stainless Steel. Contact B-Line for
alternative finishes.
Order By: Figure number and finish.
US Patent Numbers
Pat. #6,273,372, Pat. #6,517,030, Pat. #6,953,174,
Pat. #6,708,930, Pat. #7,191,987, Pat. #7,441,730, Pat. #7,669,806
Eaton’s B-Line Business seismic bracing components are designed to be compatible only with other B-Line bracing components,
resulting in a listed seismic bracing assembly. B-Line’s warranty for seismic bracing components will be the warranty provided in
B-Line’s standard terms and conditions of sale made available by B-Line, except that, in addition to the other exclusions from
B-Line’s warranty, Eaton’s B-line Business makes no warranty relating to B-Line’s seismic bracing components that are combined
with products not provided by Eaton’s B-Line Business.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
multiple rod sizes; 3/8" thru 5/8" and 3/4" thru 7/8". “Stackable” design allows
installation of both lateral and longitudinal braces to be easily installed on a single
hanger rod, with no disassembly.
Installation: Fig. 981 is the “braced pipe” attachment component of a lateral
or longitudinal brace assembly. It is intended to be combined with the pipe hanger,
all-thread rod, “bracing pipe” and TOLCO transitional and structural attachment
component(s) to form a complete bracing assembly. NFPA 13 and or OSHPD
guidelines should be followed.
To Install: Spin nut on top of hanger counterclockwise to loosen the nut and raise it
above the top of the hanger. Attach Fig. 981 by slipping the open side of the 981
yoke onto the all thread rod above the top of the hanger. Tighten 3/8" cone point set
screw on yoke until head breaks-off to ensure proper installation torque. Spin the hex
nut clockwise and tighten securely. Insert brace pipe into the jaw of the 981 and
tighten the cone point set screw until the head breaks off ensuring proper installation
torque. Pivot brace pipe to proper angle and attach to structure using a TOLCO
swivel structural attachment. Shown with 1"
Approvals: Included in our Seismic Restraint Systems Guidelines, approved by Sch. 40 Pipe Brace
the California Office of Statewide Health Planning and Development (OSHPD).
For additional load, spacing and placement information relating to OSHPD Shown with Fig. 981 - Fast
projects, please refer to the TOLCO Seismic Restraint Systems Guidelines. Attach Universal Swivel Sway Brace
Finish: Electro-Galvanized Attachment
981-S 3/8” thru 5/8” 51/8” (130.2) 41/8” (104.8) 11/4” (31.7) 21/4” (57.1) 2015 (8.96) 88 (39.9)
981-L 3/4” & 7/8” 51/8” (130.2) 41/8” (104.8) 11/4” (31.7) 21/4” (57.1) 2015 (8.96) 82 (37.2)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Seismic Bracing
Patent Pending
B
Size Range: Available with holes for 1/2”-13 thru 3/4”-10 fastener attachment.
Mounting Hardware
Material: Steel Is Not Included
Function: Used for attachment of seismic bracing to structure or hanger.
Features: Allows up to 12” (304.8mm) of adjustability in brace length, when
used with Fig. 985. Break-off set screw heads visually verify required
installation torque. Swivel allows adjustment to various surface angles.
Finish: Electro-galvanized
Order By: Figure number, rod size & finish
Patent Pending
Set Screw
Part Rod Hole Dia. Max. Rec. Approx. Included
Number Size D Load* Wt./100
in. (mm) lbs. (kN) lbs. (kg)
* When used with 15/8” (41.3mm) x 15/8” (41.3mm) 12 Ga. (2.6mm) channel
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
of cable will, over time, begin to sag and deform, thus rendering the bracing
system to not perform properly.
Pre-Stretched
Cable
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Seismic Bracing
to any surface angle.
Approvals: — Included in our Seismic Restraints Catalog approved by the
State of California Office of Statewide Health Planning and Development
(OSHPD). For additional load, spacing and placement information relating
to OSHPD projects, please refer to the TOLCO Seismic Restraint System Guidelines.
Finish: — Electro-Galvanized D
Order By: — Figure number, cable size and mounting hole size.
Note: — Order 990H for hanger rod, bolt or fastener holes sized for 7⁄8" (22.2mm) A
thru 11⁄4" (31.7mm) rods.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
3/8” cone point set screw until head breaks off. “Stackable” design allows installation of
both lateral and longitudinal braces, as well as opposing braces, to be easily installed on a
single hanger rod, with no disassembly. The retrofit yoke has a visual verification of proper
installation torque. Tighten existing hex nut down until the slight gap in the yoke assembly
closes completely.
Approvals: Included in our Seismic Restraints Catalog approved by the State of California
Office of Statewide Health Planning and Development (OSHPD). For additional load,
spacing and placement information relating to OSHPD projects, please refer to the TOLCO
Seismic Restraint System Guidelines.
Finish: Electro-Galvanized
Order By: — Figure number, rod size range 3/8" thru 5/8" or 3/4" thru 7/8"
US Patent Nubers: Pat. #7,097,141, Pat. #7,654,043, Pat. #7,654,043 B2
991-S-1/8 3/8”
1/8” (3.2) 45/16” (14.3) 2” (50.8) 975 (4.33) 128.3 (58.2)
991-S-3/16 thru 3/16” (4.8) 5” (127.0) 21/4” (57.1) 2050 (9.12) 182.1 (82.6)
5/8”
991-S-1/4 1/4” (6.3) 5” (127.0) 25/8” (66.7) 3150 (14.01) 221.1 (100.3)
A
Part Rod Cable Max. Design Approx.
Number Sizes Diameter A B Load* Wt./100
in. (mm) in. (mm) in. (mm) lbs. (kN) lbs. (kg)
991-L-1/8 3/4”
1/8” (3.2) 45/16” (14.3) 2” (50.8) 975 (4.33) 122.3 (55.5)
991-L-3/16 & 3/16” (4.8) 5” (127.0) 21/4” (57.1) 2050 (9.12) 176.1 (79.9)
7/8
991-L-1/4 1/4” (6.3) 5” (127.0) 25/8” (66.7) 3150 (14.01) 215.1 (97.5)
* Maximum load rating controlled by cable breaking strength.
Note:
See Page 185 For
Pre-Stretched
Cable Information
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Seismic Bracing
brace assembly. It is intended to be combined with the "bracing pipe" and TOLCO
structural attachment component, Fig. 980, 910 or 909 to form a complete bracing
assembly. Follow NFPA 13 and/or OSHPD guidelines.
To Install: Place the Fig. 1000 over the pipe to be braced, insert bracing pipe through
opening leaving a minimum of 1" extension. Brace pipe can be installed on top or bottom
of pipe to be braced. Tighten hex nuts until leaf spring is flat. It is recommended that the
brace angle be adjusted before hex nuts are fully tightened. UL Listed Design Load
Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL). Approved 1” (25mm) thru 2” (50mm) pipe size -
for use with Allied Dyna Flow sprinkler pipe up to 2" as a restraint device. Maximum 655 lbs. (2.91kN)
horizontal design load is 655 lbs. (2.91kN) Torque requirement is 6-8 ft./lbs. (8-10Nm)
Approved by Factory Mutual Engineering (FM). Included in our Seismic Restraints Catalog
approved by the State of California Office of Statewide Health Planning and Development
(OSHPD). For additional load, spacing and placement information relating to OSHPD
projects, please refer to the TOLCO Seismic Restraint Systems Guidelines.
Application Note: Position Fast Clamp and tighten two hex nuts until leaf spring flattens.
A minimum of 1" pipe extension beyond the Fig. 1000 is recommended.
Finish: Plain. Contact B-Line for alternative finishes and materials.
Order By: Order first by pipe size to be braced, followed by pipe Lateral Brace
size used for bracing, figure number and finish.
Pipe Part Number & Approx. Wt./100 Design Load - Allowable Horizontal Capacity (lbf) Per Installation 1, 2, 3
Size 1” (24mm) Brace Pipe 11/4” (32mm) Brace Pipe 30°-44° 45°-59° 60°-74° 75°-90°
in. (mm) Lbs. (kg) Lbs. (kg) Lbs. (kN) Lbs. (kN) Lbs. (kN) Lbs. (kN)
1” (25) 1000-1 X 1 71.6 (32.5) 1000-1 X 11/4 75.8 (34.4) 200 (0.89) 280 (1.24) 340 (1.51) 380 (1.69)
11/4” (32) 1000-11/4 X 1 74.8 (33.9) 1000-11/4 X 11/4 79.1 (35.9) 200 (0.89) 280 (1.24) 340 (1.51) 380 (1.69)
11/2” (40) 1000-11/2 X1 77.8 (35.3) 1000-11/2 X 11/4 82.1 (37.2) 200 (0.89) 280 (1.24) 340 (1.51) 380 (1.69)
2” (50) 1000-2 X 1 84.1 (38.1) 1000-2 X 11/4 88.4 (40.1) 200 (0.89) 280 (1.24) 340 (1.51) 380 (1.69)
21/2” (65) 1000-21/2 X1 90.2 (40.9) 1000-21/2 X 11/4 94.6 (42.9) 200 (0.89) 280 (1.24) 340 (1.51) 380 (1.69)
3” (80) 1000-3 X 1 97.3 (44.1) 1000-3 X 11/4 101.7 (46.1) 230 (1.02) 320 (1.42) 400 (1.78) 450 (2.00)
31/2” (90) 1000-31/2 X1 104.0 (47.2) 1000-31/2 X 11/4 108.4 (49.2) 230 (1.02) 320 (1.42) 400 (1.78) 450 (2.00)
4” (100) 1000-4 X 1 110.3 (50.0) 1000-4 X 11/4 114.6 (52.0) 230 (1.02) 320 (1.42) 400 (1.78) 450 (2.00)
5” (125) 1000-5 X 1 123.1 (55.8) 1000-5 X 11/4 127.4 (57.8) -- -- -- -- -- -- -- --
6” (150) 1000-6 X 1 136.5 (61.9) 1000-6 X 11/4 140.8 (63.8) -- -- -- -- -- -- -- --
1 FM Approved when used with 1, 11/4, 11/2, or 2 inch NPS Schedule 40 GB/T 3091,EN 10255H, or JIS G3451 steel pipe as the brace member.
2 Load rating for LW above refers to FM Approved Lightwall Pipe commonly referred to as “Schedule 7”. These ratings may also be applied when EN 10220
and GB/T 8163 steel pipe.
3 Load rating for Schedule 10 above may be applied to GB/T 3092,EN 10255M and H, or JIS G3454, FM Approved Thinwall, or Schedule 40 steel pipes.
Note: See UL load ratings in UL Listed Design Load chart shown under drawing.
Eaton’s B-Line Business seismic bracing components are designed to be compatible only with other B-Line bracing components,
resulting in a listed seismic bracing assembly. B-Line’s warranty for seismic bracing components will be the warranty provided in
B-Line’s standard terms and conditions of sale made available by B-Line, except that, in addition to the other exclusions from
B-Line’s warranty, Eaton’s B-line Business makes no warranty relating to B-Line’s seismic bracing components that are combined
with products not provided by Eaton’s B-Line Business.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
riser brace. Comes assembled and ready for installation. Fig. 1001 has built-in
visual verification of correct installation. See installation note below. Set Screws
Included
Installation Note: Position Fig. 1001 over the pipe to be braced and tighten
two hex head cone point set screws until heads bottom out. A minimum of
1" (25mm) pipe extension is recommended. Brace pipe can be installed on top or
bottom of pipe to be braced. Pipe UL Listed Design Load - Lbs.
Size For Brace Pipe Size 1” / 11/4”
Approvals: Underwriters Laboratories Listed in the USA (UL)
and Canada (cUL). Approved by Factory Mutual Engineering (FM). Included in our Sch. 7 Sch. 10 Sch. 40
Seismic Restraints Catalog approved by the State of California Office of Statewide in. (mm) 1” / 11/4” 1” / 11/4” 1” / 11/4”
Health Planning and Development (OSHPD). For additional load, spacing and 1” (25) -- / -- 1000 / 1000 1000 / 1000
placement information relating to OSHPD projects, please refer to the TOLCO
11/4” (32) -- / -- 1000 / 1000 1000 / 1000
Seismic Restraint Systems Guidelines, OPA-0300-10.
11/2” (40) -- / -- 1500 / 1500 1500 / 1500
Finish: Plain or Electro-Galvanized. Contact B-Line for alternative finishes and
materials. 2” (50) -- / -- 2015 / 2015 2015 / 2015
Order By: Indicate pipe size to be braced followed by pipe size used for bracing, 21/2” (65) 1600 / 1600 2015 / 2765 2015 / 2765
figure number and finish. 3” (80) 1600 / 1600 2015 / 2765 2015 / 2765
Important Note: Fig. 1001 is precision manufactured to perform its function as 4” (100) 1600 / 1600 2015 / 2765 2015 / 2765
a critical component of a complete bracing assembly. To ensure performance, the
UL Listing requires that Fig. 1001 must be used only with other TOLCO bracing 6” (150) 1600 / 1600 2015 / 2765 2015 / 2765
products. 8” (200) 1600 / 1600 2015 / 2765 2015 / 2765
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Seismic Bracing
and/or TOLCO State of California OSHPD Approved Seismic Restrain Manual.
Features: Unique design will not damage thin wall, plastic, Hardware
copper or ductile iron pipe. Easy verification of proper installation Included
by tightening bolts until ears touch.
Installation: Place Fig. 2002 over pipe to be braced. Slide
bracing pipe through attachment and tighten hex nuts until ears UL Listed Design Load
touch. 2015 lbs. (8.96kN)
Approvals: Underwriters Laboratories Listed in the USA (UL) and
Canada (cUL). Included in our Seismic Restraints Catalog approved
by the State of California Office of Statewide Health Planning and
Development (OSHPD). For additional load, spacing and placement
information relating to OSHPD projects, please refer to the TOLCO
Seismic Restraint Systems Guidelines.
Finish: Plain. Contact B-Line for alternative finishes and materials. Shown with
Fig. 980
Order By: Figure number, pipe size to be braced, pipe size
used for bracing (11⁄2" (40mm) or 2" (50mm)) and finish.
Important Note: Fig. 2002 is precision manufactured
to perform its function as a critical component of a complete
bracing assembly. To ensure performance, the UL Listing
requires that the Fig. 2002 must be used only with other
TOLCO bracing products. 1” (25.4mm)
Min.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Concrete inserts offered in this section are designed to provide a pre-set support point in concrete ceilings, walls,
and floors. A range of inserts with varying design loads are available.
Materials
Carbon Steel and Malleable Iron are used in the manufacture of concrete inserts. Stainless Steel and other
materials are available.
Finishes
The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and
Electro-Galvanized Zinc (ASTM B633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A123), Red Primer, Plastic
Coating, DURA-GREEN™ and other special coatings are available upon request.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Concrete Inserts
12” (305mm) 1” (25.4mm) 12” (305mm) 1” (25.4mm) 12” (305mm) 1” (25.4mm)
Minimum Minimum Minimum Minimum Minimum Minimum
Edge of Concrete
Edge of Concrete
1” (25.4mm)
Minimum Fig. 109A
Fig. 109A Fig. 109A
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Concrete Inserts
Anchor Bolt
ASTM A307
E
Rod Coupling
Edge of Concrete
DE Min.
109AF-5/8 82.2 (37.3)
109AF-3/4 113.8 (51.6)
Design Load-Vertical 109AF-7/8 130.6 (59.2)
Rod Design Load Vertical Design Load Shear Design Load 45° Embedment DE
Size Hard Rock Light Wt. Hard Rock Light Wt. Hard Rock Light Wt. Depth E Min.
Part No. lbs. (kN) lbs. (kN) lbs. (kN) lbs. (kN) lbs. (kN) lbs. (kN) in. (mm) in. (mm)
109AF-3/8 3/8"-16 1255 (55.82) 735 (3.28) 978 (4.35) 733 (3.26) 777 (3.45) 525 (2.33) 31/2” (88.9) 2” (50.8)
109AF-1/2 1/2"-13 2321 (10.32) 1392 (6.19) 978 (4.35) 733 (3.26) 980 (4.36) 679 (3.02) 31/2” (88.9) 2” (50.8)
109AF-5/8 5/8"-11 780 (3.47) 468 (2.08) 1278 (5.68) 958 (4.26) 688 (3.06) 445 (1,98) 4” (101.6) 2” (50.8)
109AF-3/4 3/4"-10 1346 (5.99) 806 (3.58) 1278 (5.68) 958 (4.26) 927 (4.12) 619 (2,75) 4” (101.6) 21/2” (63.6)
109AF-7/8 7/8"-9 2321 (10.32) 1391 (6.19) 1278 (5.68) 958 (4.26) 1166 (5.18) 803 (3,57) 4” (101.6) 6” (152.4)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
A
3/16" Dia.
(4.8)
Concrete Inserts
B2499-5/8 5/8"-11 3" (76.2) 31/2" (88.9) 1810 (8.05) 118.0 (53.5)
B2499-3/4 3/4"-10 3" (76.2) 31/2" (88.9) 2710 (12.05) 154.0 (69.8)
B2499-7/8 7/8"-9 3" (76.2) 4" (101.6) 3770 (16.77) 210.0 (95.3)
B2499-1 1"-8 3" (76.2) 4" (101.6) 4960 (22.06) 276.0 (125.2)
Consult factory for specifications on rod sizes 11/8"-7, 11/4"-6, and 11/2"-6
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Concrete Inserts
Design Load: Loading based on a straight pull of 600 Lbs. (2.67kN).
Note: Before installation ensure that concrete is sufficient to
carry the load.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
rods as required. After forms are dismantled, the B3014N nut can be (20.6)
installed and the rod fastened to the nut. The rod should touch the 21/4"
inside top of the insert. (57.1)
nut below.
Note: Before installation ensure that concrete is sufficient to
carry the load.
1/2"
Standard Finish: Plain or Electro-Galvanized
(12.7)
Service: Designed for use with the B3014 malleable
For 3/8"-16 thru
iron insert shown above. 5/8"-11 Tap Sizes 'A'
17/8"
Ordering: Part number and finish. (47.6)
17/8"
(47.6)
1/2"
(12.7)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Concrete Inserts
Styrofoam Filled
Channel End Cap Design Load Max. Pipe Size Approx. Wt./100
Part No. Size Part No. Lbs. (kN) in. (mm) Lbs. (kg)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
2"
5/32" (4.0) (50.8)
Dia. Nail Holes
8"
(203.2)
51/2”
(139.7)
15/8”
12"
(304.8) (41.3)
Styrofoam
End Caps 15/8”
(41.3)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Order By: Part number and finish. Channel nuts are sold .188” (4.8) Knockouts
separately, see page 16 for appropriate selection. for Nailing Inserts
To order inserts without styrofoam and end caps add insert To Forms
Concrete Inserts
31/8” 11/16”
only to the part number. (79.4)
(17.4)
15/8”
(41.3) B22-I-12 thru B22-I-240
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Design Load: 2000 Lbs. (8.89kN) per foot for B32-I-12 thru 15/8”
11/2”
B32-I-240 in 3000 psi concrete. Loads concentrated within the (41.3)
(38.1)
last 2” (50.8mm) of inserts 8” (203.2mm) and longer should not 3/4”
exceed 1000 Lbs. (4.45kN). (19.0)
Order By: Part number and finish. Channel nuts are sold
separately, see page 16 for appropriate selection. .188” (4.8) Knockouts
for Nailing Inserts
To order inserts without styrofoam and end caps add insert
Concrete Inserts
27/8” To Forms
only to the part number. 11/16”
(73.0)
(17.4)
13/8”
(34.9) B32-I-12 thru B32-I-240
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Design Load: 1500 Lbs. (6.67kN) per foot for B52-I-12 thru 15/8”
B52-I-240 in 3000 psi concrete. Loads concentrated within the 11/2”
(41.3)
(38.1)
last 2” (50.8mm) of inserts 8” (203.2mm) and longer should not
3/4”
exceed 750 Lbs. (3.33kN).
(19.0)
Order By: Part number and finish. Channel nuts are sold
separately, see page 16 for appropriate selection. .188” (4.8) Knockouts
for Nailing Inserts
To order inserts without styrofoam and end caps add insert
Concrete Inserts
To Forms
only to the part number. 25/16” 11/16”
(58.7)
(17.4)
13/16”
B52-I-12 thru B52-I-240
(20.6)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Approx. Wt./100
Part No. Sleeve Diameter Wall Thickness Lbs. (kg)
All Diameters 5/16" (7.9mm) and under
BD40 1.5 (.68)
2" (50.8mm) to 6" (152.4mm) Schedule 40 Pipe
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Concrete Inserts
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Brackets offered in this section are designed for support of pipe or hanger rod attachments. Brackets offer a
convenient means of supporting pipe from a vertical surface.
Materials
Carbon Steel material is mig-welded into bracket assemblies. Stainless Steel and other materials are
available.
Finishes
The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and
Electro-Galvanized Zinc (ASTM B633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A123), Red Primer, Plastic
Coating, DURA-GREEN™ and other special coatings are available upon request.
Approvals (as noted)
Items in this section comply with Federal Specification WW-H-171E & A-A-1192A or Manufacturers Standardization
Society ANSI/MSS SP-69 & SP-58.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
C
H Dia.
Specify
A
9
/16" Dia.
(14.3)
2 Holes
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
o
A 45
15/8"
B22 Channel (41.2)
B32 Channel
2"
(50.8)
11/4"
(31.7)
Brackets
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
H
2 Holes
Brackets
Mtg. Hole H A B C
Part No. in. (mm) in. (mm) in. (mm) in. (mm)
B3065-1 9/16" (14.3) 13" (330.2) 9" (228.6) 111/2" (292.1)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
H
2 Holes
Brackets
Mtg. Hole H A B C
Part No. in. (mm) in. (mm) in. (mm) in. (mm)
B3066-0 13/16" (20.6) 18" (457.2) 12" (304.8) 151/2" (393.7)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
1"
(25.4)
H
3 Holes
Brackets
Mtg. Hole H A B C D
Part No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
B3067-1 11/8" (28.6) 24" (609.6) 18" (457.2) 211/4" (539.7) 21/2" (63.5)
B3067-2 11/8" (28.6) 30" (762.0) 24" (609.6) 271/4" (692.1) 21/2" (63.5)
B3067-3 11/8" (28.6) 36" (914.4) 30" (762.0) 33" (838.2) 21/2" (63.5)
B3067-4 11/8" (28.6) 42" (1066.8) 36" (914.4) 39" (990.6) 31/2" (88.9)
B3067-5 11/8" (28.6) 50" (1270.0) 42" (1066.8) 46" (1168.4) 31/2" (88.9)
** One Hole
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Brackets
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Upper attachments offered in this section are designed to suspend hanger rods from beams, concrete, and other
structural surfaces by bolting or welding.
Materials
Carbon Steel and Malleable Iron are used in the manufacturing of upper attachments and provide the high strength
properties required. Stainless Steel and other materials are available.
Finishes
The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and
Electro-Galvanized Zinc (ASTM B633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A123), Red Primer, Plastic
Coating, DURA-GREEN™ and other special coatings are available upon request.
Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may
or may not be uniformly coated with special finishes. In some cases, the hanger itself may be coated, however, the
hardware may be supplied Electro-Plated, copper plated, or in stainless steel.
Approvals (as noted)
Items in this section are Underwriters Laboratories Listed, Factory Mutual Approved, and comply with Federal
Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3199RCT B3199R
Attachments
Order By: Part number, rod size and finish
Upper
US Patent #5,702,077
Part No. Pipe Size A B C Hole Dia. D Thread Size Design Load Approx. Wt./100
in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) E Lbs. (kN) Lbs. (kg)
78-3/8 1/2" - 2” (15 - 60) 3" (76.2) 21/8" (54.0) 11/8" (28.6) 5/16" (7.9) 3/8"-16 150* (0.67) 15 (6.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Function: Designed for attaching hanger rod to the side of beams or walls.
Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, A
Type 35 and Manufacturers Standardization Society ANSI/MSS SP-69 & H2
SP-58, Type 34.
Finish: Plain or Electro-Galvanized
Attachments
Design Load: 500 Lbs. (2.22 kN) when installed in either direction.
A C
Weight: Approx. Wt./100 - 49 Lbs. (22.2 kg)
Rod Size A B C Hole 1 Hole 2 Hole 3 Max. Rec. Load Approx. Wt./100
Part No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
B3070-3/8x1/2 3/8"-16 x 1/2"-13 2" (50.8) 13/16" (20.6) 2" (50.8) 9/16" (14.3) 7/16" (11.1) 5/16" (7.9) 700 (3.11) 35 (15.9)
B3070-1/2x1/2 1/2"-13 x 1/2"-13 2" (50.8) 3/4" (19.0) 2" (50.8) 9/16" (14.3) 9/16" (14.3) 5/16" (7.9) 700 (3.11) 34 (15.4)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3060-3/8 7/16" (11.1) 23/16" (55.6) 2" (50.8) 11/4" (31.7) 1/4" (6.3) 305 (1.35) 53 (24.0)
B3060-1/2 9/16" (14.3) 23/16" (55.6) 2" (50.8) 11/4" (31.7) 1/4" (6.3) 565 (2.51) 51 (23.1)
B3060-5/8 11/16" (17.5) 23/16" (55.6) 2" (50.8) 11/4" (31.7) 1/4" (6.3) 909 (4.02) 48 (21.8)
B3060-3/4 13/16" (20.6) 3" (76.2) 3" (76.2) 13/4" (44.4) 3/8" (9.5) 1355 (6.03) 169 (74.8)
B3060-7/8 15/16" (23.8) 4" (101.6) 4" (101.6) 21/2" (63.5) 3/8" (9.5) 1870 (8.32) 312 (141.5)
Fig. 51 - Side Beam Bracket for NFPA Rod & Fastener Sizing
Hole 1
Size Range: 3/8"-16 thru 1/2"-13 rod, 1/2" (15mm) thru 8" pipe (200mm) B
Material: Steel
Hole 2
Function: Recommended for attaching hanger rod to side of beams or walls.
A
Designed to accommodate current rod schedule and fastener requirements per
National Fire Protection Association (NFPA) Pamphlet 13.
Attachments
B
Upper
Approvals: Underwriters Laboratories Listed in the USA (UL) and
Canada (cUL), and Factory Mutual Engineering approved.
Finish: Plain. Contact B-Line for alternative finishes and materials.
Order By: Part number, rod size and finish A C
Part No. Pipe Size Rod A B C Hole 1 Hole 2 Design Load Approx. Wt./100
in. (mm) Size in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
51-1/2-2 1/2"
- 2” (15 - 60) 3/8"-16 2" (50.8) 3/4" (19.0) 2" (50.8) 7/16" (11.1) 7/16" (11.1) 700 (3.11) 35 (15.9)
51-21/2-4 21/2" - 4” (65 - 100) 3/8"-16 2" (50.8) 3/4" (19.0) 2" (50.8) 9/16" (14.3) 7/16" (11.1) 700 (3.11) 34 (15.4)
51-5-6 5" - 6” (125 - 150) 1/2"-13 21/2" (63.5) 3/4" (19.0) 21/2" (63.5) 9/16" (14.3) 9/16" (14.3) 1250 (5.56) 71 (32.2)
51-8 8” (200) 1/2"-13 21/2" (63.5) 3/4" (19.0) 21/2" (63.5) 11/16" (17.5) 9/16" (14.3) 1250 (5.56) 70 (31.7)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Part No. Rod A B C Hole Size H Max. Rec. Load Approx. Wt./100
Size in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
50-3/8 3/8"-16 2" (50.8) 3/4" (19.0) 2" (50.8) 7/16" (11.1) 700 (3.22) 35 (15.9)
50-1/2 1/2"-13 2" (50.8) 3/4" (19.0) 2" (50.8) 9/16" (14.3) 700 (3.22) 35 (15.9)
50-5/8 5/8"-11 2" (50.8) 3/4" (19.0) 2" (50.8) 11/16" (17.5) 700 (3.22) 32 (14.5)
50-3/4 3/4"-10 21/2" (63.5) 3/4" (19.0) 21/2" (63.5) 13/16" (20.6) 1250 (5.56) 110 (49.9)
50-7/8 7/8"-9 21/2" (63.5) 3/4" (19.0) 21/2" (63.5) 15/16" (23.8) 1250 (5.56) 100 (45.3)
Part No. Size A B Hole Size Max. Rec. Load Approx. Wt./100
in. (mm) Size in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
Attachments
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
*Note: Additionally UL has listed the Fig. 58 with fasteners 2 - 1/4" x 2" Lag Bolts
(No Pre-Drilling
as shown in table below. Up to 4" (100mm) pipe
Per NFPA
1 - 3/8" or 1/2" Lag Bolts
Up to 4" (100mm) pipe
2 - #16 x 2"
Drive Screws
1/2" (15mm) - 4" (100mm) pipe
Attachments
Up to 4" (100mm) pipe
Upper
UL Listed Fastener Table
Pipe Size Qty Fastener Type Material Bolt & Hex Nut
Up to 4" (100mm) pipe
2" 2 #16 x 2" Drive screws Wood
2" 1 3/8" Lag bolt Wood
21/2" - 4" 1 1/2" Lag bolt Wood
31/2" 2 1/4" x 11/2" Lag bolts Wood
4" 2 1/4" x 2" Lag bolts ** Wood
4" 2 #14 x 1" or 1/4" x 1" Tek type screws Metal (15 gauge)
4" 2 #14 x 1" or 1/4" x 1" Tek type screws Metal (16 gauge)
** No pre-drilling
Part No. Pipe Size Rod A B C Max. Rec. Load Approx. Wt./100
in. (mm) Size in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
58 1/2" - 4” (15 - 100) 3/8"-16 23/4" (69.8) 11/2" (38.1) 11/8" (28.6) 300*** (1.33) 14 (6.3)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Fig. 200
“Trimline” All Threaded Rod
Adjustable
Band Hanger
of
Ro
ched
Pit Fig. 65 Reversible
Beam Clamp
Fig. 75 Swivel
Attachment
W-Beam Fig. 75 Swivel
All Threaded Rod Attachment
All
Threaded
B3100 Rod
Clevis Hanger
May be used as a upper attachment May be used with a pitched roof appli-
with short hanger rod to omit seismic cation, to meet requirements of NFPA 13
bracing (2010) Sec. 9.1.2.5.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Attachments
Finish: Plain or Electro-Galvanized E
Upper
Order By: Part number and finish.
Part No. B C D E F T
in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
B3062-3/8 7/16" (11.1) 7/8" (22.2) 13/8" (34.9) 5/8" (15.9) 17/16" (36.5) 1/4" (6.3)
B3062-1/2 9/16" (14.3) 13/16" (30.2) 113/16" (46.0) 3/4" (19.0) 17/8" (47.6) 11/32" (8.7)
B3062-5/8 3/4" (19.0) 17/16" (36.5) 23/16" (55.6) 7/8" (22.2) 21/4" (54.0) 7/16" (11.1)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3083-11/4 11/4"-7 13/8" (34.9) 9500 (42.25) 7440 (33.09) 734 (332.7) 955 (432.9)
Upper
B3083-11/2 11/2"-6 15/8" (41.3) 13800 (61.38) 10807 (48.07) 1460 (661.8) 1817 (823.7)
B3083-13/4 13/4"-5 17/8" (47.6) 18600 (82.73) 14566 (64.79) 1746 (791.5) 2310 (1047.1)
B3083-2 2"-41/2 21/4" (57.1) 24600 (109.42) 19625 (87.29) 2190 (992.7) 2996 (1358.1)
B C Dia. D E T xW
Part No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
B3083-3/8 2" (50.8) 7/8" (22.2) 9/16" (14.3) 11/4" (31.7) 1/4" x 2" (6.3 x 50.8)
B3083-1/2 2" (50.8) 7/8" (22.2) 11/16" (17.5) 11/4" (31.7) 1/4" x 2" (6.3 x 50.8)
B3083-5/8 2" (50.8) 7/8" (22.2) 13/16" (20.6) 11/4" (31.7) 1/4" x 2" (6.3 x 50.8)
B3083-3/4 2" (50.8) 11/8" (28.6) 15/16" (23.8) 11/2" (38.1) 3/8" x 21/2" (9.5 x 63.5)
B3083-7/8 3" (76.2) 11/4" (31.7) 11/8" (28.6) 2" (50.8) 3/8" x 21/2" (9.5 x 63.5)
B3083-1 3" (76.2) 11/2" (38.1) 11/4" (31.7) 2" (50.8) 1/2" x 3" (12.7 x 76.2)
B3083-11/8 3" (76.2) 11/2" (38.1) 13/8" (34.9) 23/4" (69.8) 1/2" x 3" (12.7 x 76.2)
B3083-11/4 3" (76.2) 2" (50.8) 11/2" (38.1) 3" (76.2) 5/8" x 4" (15.9 x 101.6)
B3083-11/2 4" (101.6) 21/2" (63.5) 13/4" (44.4) 31/2" (88.9) 3/4" x 5" (19.0 x 127.0)
B3083-13/4 5" (127.0) 23/4" (69.8) 2" (50.8) 33/4" (95.2) 3/4" x 5" (19.0 x 127.0)
B3083-2 5" (127.0) 31/4" (82.5) 23/8" (60.3) 33/4" (95.2) 3/4" x 6" (19.0 x 152.4)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
W
H
B3080S
T
R
B3080L
Attachments
B3080S-11/4 B3080L-11/4 11/4"-7 13/8" (38.1) 9500 (42.25) 310 (140.6) 381 (172.8)
Upper
B3080S-11/2 B3080L-11/2 11/2"-6 15/8" (41.3) 13800 (61.38) 503 (228.1) 662 (300.3)
B3080S-13/4 B3080L-13/4 13/4"-5 17/8" (47.6) 18600 (82.73) 487 (220.9) 646 (293.0)
B3080S-2 B3080L-2 2"-41/2 21/4" (57.1) 24600 (109.42) 744 (337.5) 808 (366.5)
B3080S-1/2 B3080L-1/2 11/16" (17.5) 11/2" (38.1) 3" (76.2) 11/4" (31.7) 1/4" (6.3) 21/2" (63.5)
B3080S-5/8 B3080L-5/8 13/16" (20.6) 11/2" (38.1) 3" (76.2) 11/4" (31.7) 1/4" (6.3) 21/2" (63.5)
B3080S-3/4 B3080L-3/4 15/16" (23.8) 11/2" (38.1) 3" (76.2) 11/4" (31.7) 3/8" (9.5) 21/2" (63.5)
B3080S-7/8 B3080L-7/8 11/8" (28.6) 2" (50.8) 3" (76.2) 11/4" (31.7) 3/8" (9.5) 21/2" (63.5)
B3080S-1 B3080L-1 11/4" (31.7) 2" (50.8) 3" (76.2) 11/2" (38.1) 1/2" (12.7) 3" (76.2)
B3080S-11/8 B3080L-11/8 13/8" (34.9) 3" (76.2) 4" (101.6) 11/2" (38.1) 1/2" (12.7) 3" (76.2)
B3080S-11/4 B3080L-11/4 11/2" (38.1) 3" (76.2) 4" (101.6) 2" (50.8) 5/8" (15.9) 4" (101.6)
B3080S-11/2 B3080L-11/2 13/8" (44.4) 3" (76.2) 41/2" (114.3) 21/2" (63.5) 3/4" (19.0) 5" (127.0)
B3080S-13/4 B3080L-13/4 2" (50.8) 3" (76.2) 41/2" (114.3) 21/2" (63.5) 3/4" (19.0) 5" (127.0)
B3080S-2 B3080L-2 23/8" (60.3) 4" (101.6) 41/2" (114.3) 3" (76.2) 3/4" (19.0) 6" (152.4)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3085-3/8 3/8"-16 1" (25.4) 8" (203.2) 10" (254.0) 5" (127.0)
B3085-1/2 1/2"-13 1" (25.4) 8" (203.2) 10" (254.0) 5" (127.0)
B3085-5/8 5/8"-11 1" (25.4) 8" (203.2) 10" (254.0) 5" (127.0)
B3085-3/4 3/4"-10 1" (25.4) 8" (203.2) 10" (254.0) 5" (127.0)
B3085-7/8 7/8”-9 1" (25.4) 8" (203.2) 10" (254.0) 5" (127.0)
B3085-1 1"-8 2" (50.8) 8" (203.2) 12" (304.8) 6" (152.4)
B3085-11/8 11/8"-7 2" (50.8) 8" (203.2) 12" (304.8) 6" (152.4)
Attachments
B3085-11/4 11/4"-7 2" (50.8) 8" (203.2) 12" (304.8) 6" (152.4)
Upper
B3085-11/2 11/2"-6 2" (50.8) 8" (203.2) 12" (304.8) 6" (152.4)
B3085-3/8 27/8" (73.0) 9/16" (14.3) 3/8" (9.5) 730 (3.25) 1145 (519.4)
B3085-1/2 27/8" (73.0) 9/16" (14.3) 3/8" (9.5) 1450 (6.00) 1143 (518.4)
B3085-5/8 27/8" (73.0) 9/16" (14.3) 1/2" (12.7) 2160 (9.61) 1490 (675.8)
B3085-3/4 31/8" (79.4) 11/16" (`17.5) 1/2" (12.7) 3230 (14.37) 1574 (713.9)
B3085-7/8 41/4" (107.7) 11/16" (`17.5) 1/2" (12.7) 4480 (19.93) 1635 (741.6)
B3085-1 41/2" (114.3) 13/16" (`20.6) 3/4" (19.0) 5900 (26.24) 3420 (1551.3)
B3085-11/8 43/4" (120.6) 15/16" (`23.8) 3/4" (19.0) 7450 (33.14) 3413 (1548.1)
B3085-11/4 5" (127.0) 15/16" (`23.8) 3/4" (19.0) 9500 (42.25) 3747 (1699.6)
B3085-11/2 61/2" (165.1) 11/8" (`28.6) 1" (25.4) 13800 (61.38) 5438 (2466.7)
* Based on allowable stresses shown in the ANSI code for pressure piping.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3086-3/8 3/8"-16 1" (25.4) 8" (203.2) 10" (254.0) 5" (127.0) 1/2" (12.7) 9/16" (14.3)
B3086-1/2 1/2"-13 1" (25.4) 8" (203.2) 10" (254.0) 5" (127.0) 5/8" (15.9) 9/16" (14.3)
B3086-5/8 5/8"-11 1" (25.4) 8" (203.2) 10" (254.0) 5" (127.0) 3/4" (19.0) 9/16" (14.3)
B3086-3/4 3/4"-10 1" (25.4) 8" (203.2) 10" (254.0) 5" (127.0) 7/8" (22.2) 11/16" (17.5)
B3086-7/8 7/8”-9 1" (25.4) 8" (203.2) 10" (254.0) 5" (127.0) 1" (25.4) 11/16" (17.5)
B3086-1 1"-8 2" (50.8) 8" (203.2) 12" (304.8) 6" (152.4) 11/8" (28.6) 13/16" (20.6)
B3086-11/8 11/8"-7 2" (50.8) 8" (203.2) 12" (304.8) 6" (152.4) 11/4" (31.7) 15/16" (23.8)
B3086-11/4 11/4"-7 2" (50.8) 8" (203.2) 12" (304.8) 6" (152.4) 13/8" (34.9) 15/16" (23.8)
Attachments
B3086-11/2 11/2"-6 2" (50.8) 8" (203.2) 12" (304.8) 6" (152.4) 15/8" (41.3) 11/8" (28.6)
Upper
Part No. G H R S Max. Rec. Load* Approx. Wt./100
in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
B3086-3/8 3/8" (9.5) 2" (50.8) 7/8" (22.2) 11/4" (31.7) 730 (3.25) 1165 (528.4)
B3086-1/2 3/8" (9.5) 2" (50.8) 7/8" (22.2) 11/4" (31.7) 1350 (6.00) 1178 (534.4)
B3086-5/8 1/2" (12.7) 2" (50.8) 7/8" (22.2) 11/4" (31.7) 2160 (9.61) 1546 (701.2)
B3086-3/4 1/2" (12.7) 2" (50.8) 11/8" (28.6) 11/2" (38.1) 3230 (14.37) 1673 (758.9)
B3086-7/8 1/2" (12.7) 3" (76.2) 11/4" (31.7) 2" (50.8) 4480 (19.93) 1783 (808.7)
B3086-1 3/4" (19.0) 3" (76.2) 11/2" (38.1) 2" (50.8) 5900 (26.24) 3636 (1649.3)
B3086-11/8 3/4" (19.0) 3" (76.2) 13/4" (44.4) 23/4" (69.8) 7450 (33.14) 3708 (1681.9)
B3086-11/4 3/4" (19.0) 3" (76.2) 2" (50.8) 3" (76.2) 9500 (42.25) 3986 (1808.0)
B3086-11/2 1" (25.4) 4" (101.6) 21/2" (63.5) 31/2" (88.9) 13800 (61.38) 5816 (2638.1)
* Based on allowable stresses shown in the ANSI code for pressure piping.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Material: Steel
B B C
Function: Structural attachment to concrete ceiling. C
Use with B3201 bridge clevis to attach to center lug. D
E
Finish: Plain. Contact B-Line for alternative finishes and
materials. G
T
H
Order By: Part number, rod size and finish F Dia.
4 Holes
R
U
Pin or Bolt Size W
B3084-1/2 1/2"-13 1" (25.4) 8" (203.2) 10" (254.0) 5" (127.0) 47/8" (123.8) 9/16" (14.3) 3/8" (9.5)
B3084-5/8 5/8"-11 1" (25.4) 8" (203.2) 10" (254.0) 5" (127.0) 47/8" (123.8) 9/16" (14.3) 1/2" (12.7)
B3084-3/4 3/4"-10 1" (25.4) 8" (203.2) 10" (254.0) 5" (127.0) 413/16" (122.2) 11/16" (17.5) 1/2" (12.7)
B3084-7/8 7/8”-9 1" (25.4) 8" (203.2) 10" (254.0) 5" (127.0) 413/16" (122.2) 11/16" (17.5) 3/4" (19.0)
B3084-1 1"-8 2" (50.8) 8" (203.2) 12" (304.8) 6" (152.4) 53/4" (146.0) 13/16" (20.6) 3/4" (19.0)
B3084-11/8 11/8"-7 2" (50.8) 8" (203.2) 12" (304.8) 6" (152.4) 53/4" (146.0) 15/16" (23.8) 3/4" (19.0)
B3084-11/4 11/4"-7 2" (50.8) 8" (203.2) 12" (304.8) 6" (152.4) 511/16" (144.5) 15/16" (23.8) 3/4" (19.0)
B3084-11/2 11/2"-6 55/8" 11/8"
Attachments
2" (50.8) 8" (203.2) 12" (304.8) 6" (152.4) (142.9) (28.6) 1" (25.4)
Upper
B3084-1/2 11/2" (38.1) 11/4" (31.7) 5/8" (15.9) 1/4" x 21/2" (6.3 x 63.5) 1350 (6.00) 1096 (497.1)
B3084-5/8 11/2" (38.1) 11/4" (31.7) 3/4" (19.0) 1/4" x 21/2" (6.3 x 63.5) 2160 (9.61) 1447 (656.3)
B3084-3/4 11/2" (38.1) 11/4" (31.7) 7/8" (22.2) 3/8" x 21/2" (9.5 x 63.5) 3230 (14.37) 1459 (661.8)
B3084-7/8 2" (50.8) 11/4" (31.7) 1" (25.4) 3/8" x 21/2" (9.5 x 63.5) 4480 (19.93) 2166 (982.5)
B3084-1 2" (50.8) 11/2" (38.1) 11/8" (28.6) 1/2" x 3" (12.7 x 76.2) 5900 (26.24) 3145 (1426.6)
B3084-11/8 3" (76.2) 11/2" (38.1) 11/4" (31.7) 1/2" x 3" (12.7 x 76.2) 7450 (33.14) 3170 (1437.9)
B3084-11/4 3" (76.2) 2" (50.8) 13/8" (34.9) 5/8" x 4" (15.9 x 101.6) 9500 (42.25) 4312 (1955.9)
B3084-11/2 3" (76.2) 21/2" (63.5) 15/8" (41.3) 3/4" x 5" (19.0 x 127.0) 13800 (61.38) 4470 (2027.6)
* Based on allowable stresses shown in the ANSI code for pressure piping.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
A E Dia.
(Rod Size) Mounting Holes
Hanger Rod
Not Included
Design Load
Part No. Rod Size Adjustment F Approx.Wt./100
Attachments
A in. (mm) Lbs. (kN) Lbs. (kg)
Upper
B3082-3/8 3/8"-16 21/8" (54.0) 810 (3.60) 53 (24.0)
B3082-1/2 1/2"-13 25/16" (58.7) 1130 (5.02) 129 (58.5)
B3082-5/8 5/8"-11 23/16" (55.6) 1810 (8.05) 128 (58.0)
B3082-3/4 3/4"-10 29/16" (65.1) 2710 (12.05) 196 (88.9)
B3082-7/8 7/8"-9 21/2" (63.5) 3770 (16.77) 282 (1278.9)
B C D Dia. E
Part No. in. (mm) in. (mm) in. (mm) in. (mm)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Threaded accessories offered in this section are designed to reduce installation time. A wide range of types and
sizes are available for various applications.
Materials
For maximum loading design, Carbon Steel, Forged Steel, and Malleable Iron are used in the manufacturing of
threaded accessories. Stainless Steel and other materials are available.
Accessories
Threaded
Finishes
The standard finishes for threaded accessories are plain steel (oil coated) sometimes referred to as black and
Electro-Galvanized Zinc (ASTM B633 SC1). Hot-Dip Galvanized After Fabrication (ASTM A153) and other special
coatings are available upon request.
Approvals (as noted)
Items in this section are Underwriters Laboratories Listed and comply with Federal Specification WW-H-171E &
A-A-1192A or Manufacturers Standardization Society ANSI/MSS SP-69 SP-58.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Accessories
Threaded
B3222-3/4 3/4"-10 1/2" (12.7) 2" (50.8) 1900 (8.45) 38 (17.2)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Rod Size B C D E F G
Part No. A in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
B3200-3/8 3/8"-16 11/2" (38.1) 13/16" (30.2) 1/2" (12.7) 2" (50.8) 13/8" (34.9) 11/16" (17.5)
B3200-1/2 1/2"-13 11/2" (38.1) 13/16" (30.2) 1/2" (12.7) 2" (50.8) 13/8" (34.9) 11/16" (17.5)
B3200-5/8 5/8"-11 11/2" (38.1) 13/16" (30.2) 1/2" (12.7) 2" (50.8) 13/8" (34.9) 11/16" (17.5)
B3200-3/4 3/4"-10 11/2" (38.1) 13/16" (30.2) 1/2" (12.7) 2" (50.8) 13/8" (34.9) 11/16" (17.5)
B3200-7/8 7/8"-9 2" (50.8) 111/16" (42.9) 3/4" (19.0) 25/8" (66.7) 115/16" (49.2) 1" (25.4)
B3200-1 1"-8 2" (50.8) 111/16" (42.9) 3/4" (19.0) 25/8" (66.7) 115/16" (49.2) 1" (25.4)
B3200-11/8 11/8"-7 21/2" (63.5) 113/16" (46.0) 1" (25.4) 33/8" (85.7) 23/8" (60.3) 11/4" (31.7)
B3200-11/4 11/4"-7 21/2" (63.5) 113/16" (46.0) 1" (25.4) 33/8" (85.7) 23/8" (60.3) 11/4" (31.7)
B3200-11/2 11/2"-6 21/2" (63.5) 113/16" (46.0) 1" (25.4) 33/8" (85.7) 23/8" (60.3) 11/4" (31.7)
B3200-13/4 13/4"-5 4" (101.6) 4" (101.6) 11/2" (38.1) 61/4" (158.7) 4" (101.6) 21/4" (57.1)
B3200-2 2"-41/2 4" (101.6) 4" (101.6) 11/2" (38.1) 61/4" (158.7) 4" (101.6) 21/4" (57.1)
B3200-21/4 21/4"-41/2 4" (101.6) 4" (101.6) 11/2" (38.1) 61/4" (158.7) 4" (101.6) 21/4" (57.1)
B3200-21/2 21/2"-41/2 4" (101.6) 4" (101.6) 11/2" (38.1) 61/4" (158.7) 4" (101.6) 21/4" (57.1)
Design Load
650°F (343°C) 750°F (399°C) Approx. Wt./100
Part No. Lbs. (kN) Lbs. (kN) Lbs. (kg)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Design Load
B501-1/2 15/16” (23.8) 13/4” (44.4) 11/2” (38.1) 5/16”-18 600 (2.67) 12 (5.4)
B501-3/4 11/8” (28.6) 13/4” (44.4) 15/8” (41.3) 5/16”-18 600 (2.67) 13 (5.9)
B501-1 13/8” (29.9) 17/8” (47.6) 15/8” (41.3) 5/16”-18 900 (4.00) 14 (6.3)
B501-11/4 123/32” (43.6) 13/4” (44.4) 115/32” (37.3) 5/16”-18 900 (4.00) 15 (6.8)
B501-11/2 2” (50.8) 13/4” (44.4) 17/16” (36.5) 5/16”-18 900 (4.00) 16 (7.2)
B501-2 27/16” (61.9) 21/16” (52.4) 17/8” (47.6) 3/8”-16 1200 (5.34) 27 (12.2)
B501-21/2 215/16” (74.6) 21/16” (52.4) 113/16” (46.0) 3/8”-16 1200 (5.34) 32 (14.5)
B501-3 39/16” (90.5) 2” (50.8) 13/4” (44.4) 3/8”-16 1800 (8.00) 36 (16.3)
B501-31/2 43/32” (94.6) 2” (50.8) 123/32” (43.6) 3/8”-16 1800 (8.00) 38 (17.2)
Accessories
Threaded
B501-4 419/32” (116.7) 21/4” (57.1) 121/32” (50.0) 3/8”-16 1800 (8.00) 42 (19.0)
B501-5 521/32” (143.6) 21/4” (57.1) 2” (50.8) 1/2”-13 2400 (10.70) 92 (41.7)
B501-6 63/4” (171.4) 25/8” (66.7) 23/8” (60.3) 5/8”-11 2400 (10.70) 176 (79.8)
B501-8 83/4” (222.2) 25/8” (66.7) 23/8” (60.3) 5/8”-11 2400 (10.70) 191 (86.6)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3188C
Plastic Coated
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Accessories
Threaded
B3188-4 2700 (12.01) 2114 (9.40) 675 (3.00) 900 (4.00)
B3188-5 2700 (12.01) 2114 (9.40) 675 (3.00) 1080 (4.80)
B3188-6 4320 (19.21) 3382 (15.04) 1080 (4.80) 1080 (4.80)
B3188-8 4320 (19.21) 3382 (15.04) 1080 (4.80) -- --
B3188-10 6460 (28.73) 5060 (22.50) 1615 (7.18) -- --
B3188-12 9960 (44.30) 7016 (31.21) 2490 (11.07) -- --
B3188-14 9960 (44.30) 7016 (31.21) 2490 (11.07) -- --
B3188-16 9960 (44.30) 7016 (31.21) 2490 (11.07) -- --
B3188-18 11800 (52.48) 9240 (41.10) -- -- -- --
B3188-20 11800 (52.48) 9240 (41.10) -- -- -- --
B3188-24 11800 (52.48) 9240 (41.10) -- -- -- --
B3188-30 11800 (52.48) 9240 (41.10) -- -- -- --
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3201 - Forged Steel Clevis with Pin (TOLCO Fig. 332 with pin)
B3201WO - Forged Steel Clevis without Pin (TOLCO Fig. 332 without pin)
Size Range: 3/8"-16 thru 2"-41/2 rod B
A
Center of clevis pin to
(Rod Size)
Material: Forged Steel underside of top
Hanger Rod Not
D Included N
Function: For use on high temperature piping installations Boss Dia.
providing hanger rod adjustability. N W
Thickness of threaded top. Leg Width
Features: Complies fully with code for pressure piping.
Supports loads equal to the full limitation of the hanger rod.
Available with pin and cotter pins, if required.
P
Approvals: Conforms to Federal Specification WW-H-171E & Pin Dia
A-A-1192A, Type 14 and Manufacturers Standardization
Society ANSI/MSS SP-69 & SP-58, Type 14. D
Finish: Plain. Contact B-Line for alternative finishes and B
materials. T
Order By: Part number, rod size and finish. If pin and cotter
pins are required, specify “with pin”. If other than standard
T G
combination of clevis size and rod tapping is required, specify Grip
clevis number, special rod tapping size and grip.
B3201-3/8 3/8"-16 39/16" (90.5) 17/16" (36.5) 1/2" (12.7) 5/8" (15.9) 1/2" (12.7)
B3201-1/2 1/2"-13 39/16" (90.5) 17/16" (36.5) 1/2" (12.7) 5/8" (15.9) 5/8" (15.9)
B3201-5/8 5/8"-11 39/16" (90.5) 17/16" (36.5) 5/8" (15.9) 5/8" (15.9) 3/4" (19.0)
B3201-3/4 3/4"-10 4" (101.6) 21/2" (63.5) 3/4" (19.0) 11/8" (28.6) 7/8" (22.2)
B3201-7/8 7/8"-9 4" (101.6) 21/2" (63.5) 7/8" (22.2) 11/8" (28.6) 1" (25.4)
B3201-1 1"-8 51/16" (128.6) 3" (76.2) 1" (25.4) 11/4" (31.7) 11/8" (28.6)
B3201-11/8 11/8"-7 51/16" (128.6) 3" (76.2) 11/8" (28.6) 11/4" (31.7) 11/4" (31.7)
B3201-11/4 11/4"-7 51/16" (128.6) 3" (76.2) 11/4" (31.7) 11/4" (31.7) 13/8" (34.9)
B3201-11/2 11/2"-6 6" (152.4) 31/2" (88.9) 11/2" (38.1) 11/2" (38.1) 15/8" (41.3)
B3201-13/4 13/4"-5 515/16" (150.8) 4" (101.6) 11/2" (38.1) 13/4" (44.4) 17/8" (47.6)
B3201-2 2"-41/2 7" (177.8) 5" (127.0) 21/2" (63.5) 21/4" (57.1) 21/4" (57.1)
B3201-3/8 5/16" (7.9) 11/16" (27.0) 730 (3.25) 572 (2.54) 102 (46.2) 85 (38.5)
Threaded
B3201-1/2 5/16" (7.9) 11/16" (27.0) 1350 (6.00) 1057 (4.70) 112 (50.8) 82 (37.2)
B3201-5/8 5/16" (7.9) 11/16" (27.0) 2160 (9.61) 1692 (7.52) 134 (60.8) 78 (35.4)
B3201-3/4 3/8" (9.5) 11/4" (31.7) 3230 (14.37) 2530 (11.25) 250 (113.4) 163 (73.9)
B3201-7/8 3/8" (9.5) 11/4" (31.7) 4480 (19.93) 3508 (15.60) 305 (138.3) 161 (73.0)
B3201-1 1/2" (12.7) 11/2" (38.1) 5900 (26.24) 4620 (20.55) 656 (297.5) 449 (203.6)
B3201-11/8 1/2" (12.7) 11/2" (38.1) 7450 (33.14) 5830 (25.93) 718 (325.7) 433 (196.4)
B3201-11/4 1/2" (12.7) 11/2" (38.1) 9500 (42.25) 7440 (33.09) 603 (273.5) 382 (173.3)
B3201-11/2 1/2" (12.7) 13/4" (44.4) 13800 (61.38) 10807 (48.07) 952 (431.8) 600 (272.1)
B3201-13/4 1/2" (12.7) 2" (50.8) 18600 (82.73) 14566 (64.79) 1357 (615.5) 800 (362.9)
B3201-2 5/8" (15.9) 21/2" (63.5) 24600 (109.42) 19625 (87.29) 2403 (1090.0) 1600 (725.7)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3203-3/8 3/8"-16 3/4" to 2" (20 to 50) 21/16" (52.4) 11/4" (31.7) 11/4" (31.7)
B3203-1/2 1/2"-13 21/2" to 31/2" (65 to 90) 21/16" (58.7) 13/8" (34.9) 13/8" (34.9)
B3203-5/8 5/8"-11 4"-5" (100 to125) 27/16" (61.9) 11/2" (38.1) 17/16" (36.5)
B3203-3/4 3/4"-10 6" (150) 27/8" (73.0) 13/4" (44.4) 111/16" (42.9)
B3203-7/8 7/8"-9 8" to 12" (200 to 300) 3" (76.2) 17/8" (47.6) 13/4" (44.4)
B3203-3/8 9/16" (14.3) 1/2" (12.7) 1/2" (12.7) 730 (3.25) 18 (8.1)
B3203-1/2 11/16" (17.5) 5/8" (15.9) 1/2" (12.7) 1350 (6.00) 37 (16.8)
B3203-5/8 3/4" (19.0) 5/8" (15.9) 1/2" (12.7) 1550 (6.89) 42 (19.0)
B3203-3/4 7/8" (22.2) 5/8" (15.9) 1/2" (12.7) 2100 (9.34) 56 (25.4)
B3203-7/8 7/8" (22.2) 3/4" (19.0) 9/16" (14.3) 2350 (10.45) 75 (34.0)
Material: Steel
Accessories
Threaded
Function: Designed for attachment of 3/8"-16
13
hanger rod to structure. /32"Dia.
(10.3)
Approvals: Underwriters Laboratories Listed for up to 25/8"
2" (50mm) pipe. (66.7)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B3224-1/4 1/4"-20 3/8" (10) 13/4" (44.4) 37/8" (98.4) 7/32" (5.5) 230 (1.02) 9 (4.1)
B3224-3/8 3/8"-16 1/2" to 2" (15 to 50) 13/4" (44.4) 37/8" (98.4) 13/32" (10.3) 730 (3.25) 28 (12.7)
B3224-1/2 1/2"-13 21/2" to 31/2" (65 to 90) 13/4" (44.4) 37/8" (98.4) 13/32" (10.3) 730 (3.25) 29 (13.1)
B3224-5/8 5/8"-11 4" to 5" (100 to 125) 21/4" (57.1) 51/8" (130.2) 1/2" (12.7) 730 (3.25) 30 (13.6)
B3224-3/4 3/4"-10 6" (150) 21/4" (57.1) 51/8" (130.2) 9/16" (14.3) 860 (3.82) 74 (33.5)
Design Load
Rod Size 650°F (343°C) 750°F (399°C) Approx. Wt./100
Part No. A Lbs. (kN) Lbs. (kN) Lbs. (kg)
Accessories
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Accessories
Threaded
Finish: Plain. Contact B-Line for alternative finishes and materials.
Order By: Part number, rod diameter and finish
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Fig. 98B
SC228B
SC228 - Hanger Rod Stiffener
Size Range: Secures 3/8"-16 thru 5/8"-11 hanger rod
N228WO
Material: Steel
Function: Secures channel to hanger rod for vertical seismic bracing.
3/8”-16
Slight distortion of the channel (strut) may occur upon
installation of rod stiffeners. Threads
11/2”
(63.5) SC228BS
Finish: Electro Galvanized. Contact B-Line for alternative
finishes and materials.
Weight: Approx. Wt./100: 21.0 Lbs. (9.5kg)
Order By: Part part number
Note: Order channel separately
Accessories
Threaded
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Finish: Plain. Contact B-Line for alternative finishes and materials. Dia.
Adapter
Typical Application
Accessories
Threaded
B3213-3/8 x 'L' 3/8"-16 *31/2", 8" (88.9, 203.2) 2" (50.8) 2" (50.8) 390 (1.73)
B3213-1/2 x 'L' 1/2"-13 *31/2", 8" (88.9, 203.2) 21/2" (63.5) 21/2" (63.5) 640 (2.84)
*3/8 x 31/2 and 1/2 x 31/2 will have a coach screw thread length of 2" (50.8) and a rod thread length of 1" (25.4).
Design Load is based on proper installation and solid wood.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B
Thread Length
B3210
Specify Length ‘L’ B
Eye I.D.
A
Thread Size
B
Thread Length
B3210-5/8 x 'L' B3211-5/8 x 'L' 5/8"-11 21/2" (63.5) 3/4" (19.0) 705 (3.13) 2160 (9.61) 1692 (7.52)
B3210-3/4 x 'L' B3211-3/4 x 'L' 3/4"-10 3" (76.2) 7/8" (22.2) 1050 (4.67) 3230 (14.37) 2530 (11.25)
B3210-7/8 x 'L' B3211-7/8 x 'L' 7/8"-9 31/2" (88.9) 1" (25.4) 1470 (6.54) 4480 (19.93) 3508 (15.60)
B3210-1 x 'L' B3211-1 x 'L' 1"-8 4" (101.6) 11/8" (28.6) 1940 (8.63) 5900 (26.24) 4620 (20.55)
B3210-11/8 x 'L' B3211-11/8 x 'L' 11/8"-7 41/2" (114.3) 11/4" (31.7) 2430 (10.81) 7450 (33.14) 5830 (25.93)
B3210-11/4 x 'L' B3211-11/4 x 'L' 11/4"-7 5" (127.0) 13/8" (34.9) 3120 (13.88) 9500 (42.25) 7440 (33.09)
B3210-11/2 x 'L' B3211-11/2 x 'L' 11/2"-6 6" (152.4) 15/8" (41.3) 4650 (20.68) 13800 (61.38) 10807 (48.07)
B3210-13/4 x 'L' B3211-13/4 x 'L' 13/4"-5 7" (177.8) 2" (50.8) 6380 (28.38) 18600 (82.73) 14566 (64.79)
B3210-2 x 'L' B3211-2 x 'L' 2"-41/2 8" (203.2) 21/4" (57.1) 8280 (36.83) 24600 (109.42) 19625 (87.29)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B
Thread Length
A
Thread Size
Specify Length ‘L’
B
Thread Length
B
Thread Length
A
Thread Size
Specify Length ‘L’
B
Thread Length
Accessories
B3210X-1/2 x 'L' B3211X-1/2 x 'L' 1/2"-13 21/2" (63.5) 5/8" (15.9) 440 (1.96) 1350 (6.00) 1057 (4.70)
Threaded
B3210X-5/8 x 'L' B3211X-5/8 x 'L' 5/8"-11 21/2" (63.5) 3/4" (19.0) 705 (3.13) 2160 (9.61) 1692 (7.52)
B3210X-3/4 x 'L' B3211X-3/4 x 'L' 3/4"-10 3" (76.2) 7/8" (22.2) 1050 (4.67) 3230 (14.37) 2530 (11.25)
B3210X-7/8 x 'L' B3211X-7/8 x 'L' 7/8"-9 31/2" (88.9) 1" (25.4) 1470 (6.54) 4480 (19.93) 3508 (15.60)
B3210X-1 x 'L' B3211X-1 x 'L' 1"-8 4" (101.6) 11/8" (28.6) 1940 (8.63) 5900 (26.24) 4620 (20.55)
B3210X-11/8 x 'L' B3211X-11/8 x 'L' 11/8"-7 41/2" (114.3) 11/4" (31.7) 2430 (10.81) 7450 (33.14) 5830 (25.93)
B3210X-11/4 x 'L' B3211X-11/4 x 'L' 11/4"-7 5" (127.0) 13/8" (34.9) 3120 (13.88) 9500 (42.25) 7440 (33.09)
B3210X-11/2 x 'L' B3211X-11/2 x 'L' 11/2"-6 6" (152.4) 15/8" (41.3) 4650 (20.68) 13800 (61.38) 10807 (48.07)
B3210X-13/4 x 'L' B3211X-13/4 x 'L' 13/4"-5 7" (177.8) 2" (50.8) 6380 (28.38) 18600 (82.73) 14566 (64.79)
B3210X-2 x 'L' B3211X-2 x 'L' 2"-41/2 8" (203.2) 21/4" (57.1) 8280 (36.83) 24600 (109.42) 19625 (87.29)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Length 1/4" (6.3) 3/8" (9.5) 1/2" (12.7) 5/8" (15.9) 3/4" (19.0)
11/2" (38.1) 2.3 (1.0) 6.0 (2.7) 11.8 (5.3) 19.4 (8.8) 32.3 (14.6)
2" (50.8) 2.8 (1.3) 7.0 (3.2) 14.4 (6.5) 23.2 (10.5) 38.3 (17.4)
21/2" (63.5) 3.3 (1.5) 8.3 (3.7) 16.2 (7.3) 27.0 (12.2) 44.0 (19.9)
3" (76.2) 3.9 (1.7) 9.8 (4.4) 18.6 (8.4) 31.0 (14.0) 47.7 (21.6)
31/2" (88.9) 4.4 (2.0) 11.4 (5.2) 21.2 (9.6) 34.8 (15.8) 56.3 (25.5)
4" (101.6) 5.0 (2.2) 12.5 (5.7) 23.3 (10.5) 37.6 (17.0) 58.5 (26.5)
41/2" (114.3) 5.7 (2.6) 14.0 (6.3) 26.1 (11.8) 42.6 (19.3) 64.0 (29.0)
5" (127.0) 6.3 (2.8) 15.4 (7.0) 29.0 (13.1) 45.5 (20.6) 68.0 (30.8)
51/2" (139.7) 7.0 (3.2) 16.4 (7.4) 31.5 (14.3) 49.3 (22.3) 74.0 (33.5)
6" (152.4) 7.4 (3.3) 18.3 (8.3) 34.0 (15.4) 53.0 (24.0) 77.0 (34.9)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B656-3/8 x 1/4 3/8"-16 & 1/4"-20 1" (25.4) 300 (1.33) 3.7 (1.68)
B656-1/2 x 3/8 1/2"-13 & 3/8"-16 11/4" (31.7) 730 (3.25) 6.6 (2.99)
B656-5/8 x 1/2 5/8"-11 & 1/2"-13 11/4" (31.7) 1350 (6.00) 11.6 (5.26)
Accessories
B656-3/4 x 5/8 3/4"-10 & 5/8"-11 11/2" (38.1) 2160 (9.61) 20.6 (9.34)
Threaded
B656-7/8 x 3/4 7/8"-9 & 3/4"-10 13/4" (44.4) 3230 (14.37) 39.4 (17.87) B656
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Accessories
Threaded
1 2
For Bolt A T T Approx. Wt./100
Part No. Size in. (mm) in. (mm) in. (mm) Lbs. (kg)
B3234-3/8 3/8"-16 11/4" (31.7) 5/32" (3.9) 11/32" (8.7) 9 (4.1)
B3234-1/2 1/2"-13 11/4" (31.7) 5/32" (3.9) 11/32" (8.7) 9 (4.1)
B3234-5/8 5/8"-11 11/2" (38.1) 5/32" (3.9) 13/32" (10.3) 14 (6.3)
B3234-3/4 3/4"-10 11/2" (38.1) 7/32" (5.5) 15/32" (11.9) 16 (7.2)
B3234-7/8 7/8"-9 2" (50.8) 7/32" (5.5) 9/16" (14.3) 33 (14.9)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
HN-1/4 1⁄4"-20 7⁄16" (11.1) 1⁄2" (12.7) 7/32" (5.7) 0.7 (0.3)
HN-3/8 3⁄8"-16 9⁄16" (14.3) 21/32" (16.6) 21/64" (8.3) 1.6 (0.7)
HN-1/2 1⁄2"-13 3⁄4" (19.0) 55/64" (21.8) 7/16" (11.1) 3.7 (1.7)
HN-5/8 5⁄8"-11 15⁄16" (23.8) 13/32" (27.8) 35/64" (13.9) 7.3 (3.3)
HN-3/4 3⁄4"-10 11⁄8" (28.6) 15/16" (33.3) 41/64" (16.3) 12.0 (5.4)
HN-7/8 7⁄8"-9 15⁄16" (33.3) 133/64" (38.5) 3/4" (19.0) 19.0 (8.6)
HHN-1/4 1⁄4"-20 1⁄2" (12.7) 37/64" (14.7) 15/64" (5.9) 1.2 (0.5)
Accessories
HHN-3/8 3⁄8"-16 11⁄16" (17.5) 51/64" (20.2) 23/64" (9.1) 3.1 (1.4)
Threaded
HHN-1/2 1⁄2"-13 7⁄8" (22.2) 11⁄8" (28.6) 31/64" (12.3) 6.5 (2.9)
HHN-5/8 5⁄8"-11 11⁄16" (27.0) 115⁄64" (31.3) 39/64" (15.5) 12.0 (5.4)
HHN-3/4 3⁄4"-10 11⁄4" (31.7) 129⁄64" (36.9) 47/64" (18.6) 19.0 (8.6)
HHN-7/8 7⁄8"-9 17⁄16" (36.5) 121⁄32" (42.6) 55/64" (21.8) 30.0 (13.6)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Accessories
FFW - Flat Fender Washer (TOLCO Fig. 119)
Threaded
Size Range: 3/8"-16 and 1/2"-13 rods
Material: Steel
Function: To provide a greater bearing surface than standard washer.
Finish: Plain or Electro-Galvanized.
Contact B-Line for alternative finishes and materials.
Order By: Part number and size
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Accessories
Threaded
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
To address the ever increasing issue of controlling/dampening vibration in mechanical, refrigeration, and HVAC
installations, B-Line offers the following vibration and isolation products. It is our continuing effort to offer industry
with quality support products that meet the demands of today’s construction environment.
The following pages depict isolation and vibration control products that are commonly specified and required on
piping and equipment, but not limited to, mechanical rooms. As an aid in choosing the proper vibration control
device, the chart shown on the following page is a reference for obtaining Vibration Isolation Efficiency.
Considerations must be given to the desired deflection and the amount of disturbing frequency (R.P.M.).
Vibra Trol
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Selection
Proper Sizing
Once it is determined as to what type of vibration dampening device is needed, weight loading is the next
crucial step. As a built in safety measure, take the actual weight of supported pipe or equipment (consider all
accessories - i.e. valves, insulation, brackets, etc...) and multiply by 1.25. Then refer to the sizing chart for the
selected product to determine part number.
Vibra Trol
Sizing: Divide weight of equipment by points of support to determine load requirement per support.
Example: 240 Lb. (90.7 kg) piece of equipment, 4 support points, take 240 x 1.25 = 300 Lbs.
(136.1kg) (safety
measure), then take 300 ÷ 4 = 75 Lbs. (34.0 kg) Specify appropriate vibration device
rated at 75 Lbs. (34.0 kg) for each of the support points.
If weight of equipment is unequally proportionate, select mounts to satisfy the weight distribution.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
L W
3/4"
(19.0)
No. Lbs. (kN) in. (mm) in. (mm) Pkg. Lbs. (kg)
VRP-4 180 (.80) 2" (50.8) 2" (50.8) Bulk .10 (.05)
VRP-16 720 (3.20) 4" (101.6) 4" (101.6) Bulk .41 (.19)
VRP-36 1620 (7.20) 6" (152.4) 6" (152.4) Bulk .90 (.41)
VRP-324 14580 (64.85) 18" (457.2) 18" (457.2) 3 8.15 (3.70)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
.46 (.21)
NVD-2-D Red 380-700 (1.70-3.11) .43" (11.11) (107.9) (63.5) (54.0) (47.6) (12.7) (82.5) (11.1)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
3"
23/8" (76.2)
(60.3)
21/2"
115/16" (63.5)
(49.2)
23/8" 3"
(60.3) (76.2)
21/2"
(63.5)
115/16"
(49.2)
Arrows indicate
vibration direction.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
OML*/OM Type -
Free Standing Spring Mount
Use: The economical OM series free standing
spring mounts are utilized to isolate floor mounted
equipment where transmission of noise and vibration
(below 1200RPM) is apparent.
Note: Not recommended when subject to
wind loads and weight changes.
Features: Spring is welded to lower load plate and
upper compression plate. Mounting is facilitated by an
adjustable leveling bolt. Base plate is furnished with a
skid-resistant neoprene backing, making anchoring
optional. Allows up to 2.10" (53.3mm) deflection (larger
deflection mounts available).
Typical Applications: Refrigeration compressors,
packaged air handling and refrigeration equipment,
centrifugal fans, close coupled and base mounted
pumps and similar apparatus. May also be used as a
vibration dampening device for pipe risers.
* OML Series are Lower profile.
Notes: To ensure minimum effective vibration control, the spring mount must have a static deflection at least three times (3X) greater
than the floor spans deflection.
Spring devices are stable with a vertical and horizontal spring constant equal to one (Kx/Ky=1). A 50% additional run-out from rated
capacity to solid load is also characteristic of spring type isolators.
A
B
Diameter Holes
W
W/2
D Diameter
Adjusting and Leveling Bolt
With 'C' Diameter Locking
Bolt.
Acoustical
Non-Skid Neoprene
Pad
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
OML-1-104 150-250 (.67-1.11) 1.10" (27.9) 41/2" 2" 35/8" 31/2" 9/16" 5/16" 1/2"
2.0 (.9)
(114.3) (50.8) (92.1) (88.9) (14.3) (7.9) (12.7)
OML-1-105 250-350 (1.11-1.55) 1.10" (27.9)
OML-1-106 350-450 (1.55-2.00) 1.00" (25.4)
OML-1-107 450-600 (2.00-2.67) 1.00" (25.4)
OM-1-171 75-150 (.33-.67) 1.30" (33.0)
OM-1-172 150-250 (.67-1.11) 1.30" (33.0)
OM-1-173 250-350 (1.11-1.55) 1.30" (33.0)
OM-1-174 350-500 (1.55-2.22) 1.30" (33.0) 41/2" 2" 43/4" 31/2" 9/16" 5/16" 1/2"
3.0 (1.4)
(114.3) (50.8) (120.6) (88.9) (14.3) (7.9) (12.7)
OM-1-175 500-600 (2.22-2.67) 1.10" (27.9)
OM-1-176 600-750 (2.67-3.34) 1.10" (27.9)
OM-1-177 750-900 (3.34-4.00) 1.10" (27.9)
OM-1-178 900-1100 (4.00-4.90) 1.00" (25.4)
OM-1-2010 75-150 (.33-.67) 2.10" (53.3)
OM-1-2100 150-275 (.67-1.22) 2.10" (53.3)
OM-1-2103 275-425 (1.22-1.90) 2.10" (53.3)
OM-1-2200 425-500 (1.90-2.22) 2.10" (53.3) 61/4" 4" 75/8" 5" 9/16" 1/2" 3/4"
12.0 (5.4)
Vibra Trol
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
HMLE*/HME Type - Housed 1" (25.4mm) & 2" (50.8mm) Deflection Fail Safe Spring Mount
(External Adjustment Bolt)
Use: HM series housed spring mounts are
utilized to isolate floor mounted equipment where
transmission of noise and vibration (below 1200
RPM) is apparent. This type of mount is most
commonly used to support equipment on upper
floors where structural deflection may occur.
Features: Telescopic two-piece cast iron housing
to stabilize spring where external motion may
occur. Slotted mounting holes on base with skid-
resistant pad. Mounting is facilitated by an
adjustable leveling bolt. (If bolt mount is not
required, a skid-resistant pad on top load surface
is available in the HMLT/HMT series shown on
pages 259 & 260). Springs are color-coded for load
identification. Housing components are isolated by
rubber acoustical pads. Larger capacity mountings
are available.
Typical Applications: Compressors, air handling
units, centrifugal fans, pumps and other similar
applications. May also be used as a vibration
dampening device for pipe risers.
*HMLE Series are Lower profile.
Notes: To ensure minimum effective vibration control, the spring mount must have a static deflection at least three times (3X)
greater than the floor spans deflection.
Spring devices are stable with a vertical and horizontal spring constant equal to one (Kx/Ky=1). A 50% additional run-out from
rated capacity to solid load is also characteristic of spring type isolators.
L
F
A
B
W
W/2
Free and
H Operating Stable Steel Spring
Height
Vibra Trol
Acoustical Non-Skid
Neoprene Pad
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
HMLE*/HME Type -
Housed 1" (25.4mm) & 2" (50.8mm) Deflection Fail Safe Spring Mount
(External Adjustment Bolt)
HMLE-1-104 Black 150-250 (.67-1.11) 1.00" (25.4) 51/8" 21/2" 33/4" 43/4" 31/2" 7/16" 3/8" 5.0
(130.2) (63.5) (95.2) (120.6) (88.9) (11.1) (9.5) (2.3)
HMLE-1-105 Gray 250-350 (1.11-1.55) 1.00" (25.4)
HMLE-1-106 Red 350-450 (1.55-2.00) 1.00" (25.4)
HMLE-1-107 Green 450-600 (2.00-2.67) 1.00" (25.4)
HME-1-121 Black 45-90 (.20-.40) 1.40" (35.5)
HME-1-122 Green 90-120 (.40-.53) 1.40" (35.5)
HME-1-123 Yellow 120-175 (.53-.78) 1.40" (35.5)
HME-1-124 Brown 175-250 (.78-1.11) 1.30" (33.0)
HME-1-125 Red 250-330 (1.11-1.47) 1.30" (33.0)
HME-1-126 Purple 330-450 (1.47-2.00) 1.30" (33.0) 63/8" 25/8" 51/8" 51/2" 4" 5/8" 1/2" 11.0
HME-1-127 Blue 450-600 (2.00-2.67) 1.20" (30.5) (161.9) (66.7) (130.2) (139.7) (101.6) (15.9) (12.7) (5.0)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
HMLT*/HMT Type - Housed 1" (25.4mm) & 2" (50.8mm) Deflection Fail Safe Spring Mount
(Skid Resistant Neoprene Top & Internal Adjustment Bolt)
Notes: To ensure minimum effective vibration control, the spring mount must have a static deflection at least three times (3X)
greater than the floor spans deflection.
Spring devices are stable with a vertical and horizontal spring constant equal to one (Kx/Ky=1). A 50% additional run-out from
rated capacity to solid load is also characteristic of spring type isolators.
L
F
A
B
W
W/2
Free and
H Operating Stable Steel Spring
Height
Acoustical Non-Skid
Vibra Trol
Neoprene Pad
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
HMLT*/HMT Type - Housed 1" (25.4mm) & 2" (50.8mm) Deflection Fail Safe Spring Mount
(Skid Resistant Neoprene Top & Internal Adjustment Bolt)
HMT-1-126 Purple 330-450 (1.47-2.00) 1.30" (33.0) 63/8" 25/8" 55/8" 51/2" 4" 5/8"
8.0 (3.6)
HMT-1-127 Blue 450-600 (2.00-2.67) 1.20" (30.5) (161.9) (66.7) (142.9) (139.7) (101.6) (15.9)
HMT-1-128 Orange 600-750 (2.67-3.34) 1.20" (30.5)
HMT-1-129 Pink 750-900 (3.34-4.00) 1.10" (27.9)
Vibra Trol
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Note: Vibration hangers should not come in direct contact with equipment being suspended.
Spring devices are stable with a vertical and horizontal spring constant equal to one (Kx/Ky=1). A 50%
additional run-out from rated capacity to solid load is also characteristic of spring type isolators.
W
W/2
L/2
L
Heavy Duty Hanger Box
Steel Washer
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Vibra Trol
Option 1 Option 2
Furnished with hanger box to Furnished with a scale and Option 3 Option 4
accept 30° rod swing. pointer to insure specified Furnished with a positioning plate to Furnished with spring pre-
spring deflection. hold equipment at a fixed compressed (75%) to hold equipment at a
elevation during installation. fixed elevation during installation.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Note: Vibration hangers should not come in direct contact with equipment being suspended.
Spring devices are stable with a vertical and horizontal spring constant equal to one (Kx/Ky=1). A 50%
additional run-out from rated capacity to solid load is also characteristic of spring type isolators.
W
W/2
L/2
L
Heavy Duty Hanger Box
Steel Washer
H
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
HES-1-126 Purple 330-450 (1.47-2.00) 1.80" (45.7) 31/2" 2" 91/4" 45/8" 1" 3/4"
(88.9) (50.8) (234.9) (117.5) (25.4) (19.0)
11.0 (5.0)
HES-1-127 Blue 450-600 (2.00-2.67) 1.70" (43.2)
HES-1-128 Orange 600-750 (2.67-3.33) 1.70" (43.2)
HES-1-129 Pink 750-900 (3.33-4.00) 1.60" (40.6)
HES-1-130 Gray 900-1100 (4.00-4.89) 1.50" (38.1)
HES-1-131 Wht/Blk 1100-1300 (4.89-5.78) 1.50" (38.1)
HES-1-132 Gold/Blk 1300-1500 (5.78-6.67) 1.40" (35.5)
HES-1-221 Black 45-90 (.20-.40) 2.50" (63.5)
HES-1-222 White 90-120 (.40-.53) 2.50" (63.5)
Vibra Trol
Option 1 Option 2
Furnished with hanger box to Furnished with a scale and
accept 30° rod swing. pointer to insure specified Option 3 Option 4
(Standard) spring deflection. Furnished with a positioning plate to Furnished with spring pre-compressed (75%)
hold equipment at a fixed to hold equipment at a fixed
*HESL Series are Lower profile. elevation during installation. elevation during installation.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Weight of Pipe
Pipe Size Filled With Water HS Type HES Type
in. (mm) Lbs./Ft. (kg/m) Hanger Selection Hanger Selection
1" (25) 3 (4.4) HSL-1-101 HESL-1-101
11/4" (32) 4 (5.9) HSL-1-102 HESL-1-102
11/2" (40) 5 (7.4) HSL-1-102 HESL-1-102
2" (50) 7 (10.4) HSL-1-102 HESL-1-102
21/2" (65) 10 (14.9) HSL-1-103 HESL-1-103
3" (80) 13 (19.3) HSL-1-104 HESL-1-104
4" (100) 19 (28.3) HSL-1-104 HESL-1-104
5" (125) 27 (40.2) HSL-1-106 HESL-1-106
6" (150) 35 (52.1) HS-1-127 HES-1-127
8" (200) 56 (83.3) HS-1-128 HES-1-128
10" (250) 81 (120.5) HS-1-130 HES-1-130
12" (300) 110 (163.7) HS-1-131 HES-1-131
14" (350) 125 (186.0) HS-1-132 HES-1-132
Weight of Pipe
Pipe Size Filled With Water HS Type HES Type
in. (mm) Lbs./Ft. (kg/m) Hanger Selection Hanger Selection
1" (25) 3 (4.4) (2) HSL-1-101 (2) HESL-1-101
11/4" (32) 4 (5.9) (2) HSL-1-101 (2) HESL-1-101
11/2" (40) 5 (7.4) (2) HSL-1-101 (2) HESL-1-101
2" (50) 7 (10.4) (2) HSL-1-101 (2) HESL-1-101
21/2" (65) 10 (14.9) (2) HSL-1-102 (2) HESL-1-102
3" (80) 13 (19.3) (2) HSL-1-102 (2) HESL-1-102
4" (100) 19 (28.3) (2) HSL-1-103 (2) HESL-1-103
5" (125) 27 (40.2) (2) HSL-1-104 (2) HESL-1-104
6" (150) 35 (52.1) (2) HS-1-124 (2) HES-1-124
8" (200) 56 (83.3) (2) HS-1-126 (2) HES-1-126
10" (250) 81 (120.5) (2) HS-1-127 (2) HES-1-127
12" (300) 110 (163.7) (2) HS-1-128 (2) HES-1-128
14" (350) 125 (186.0) (2) HS-1-129 (2) HES-1-129
Vibra Trol
The above charts are for reference only. Applicable codes require different support spans thus
selection of spring hanger size may change. Calculate as follows:
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
RH Type - Neoprene Vibration Hanger Use: RH series neoprene hangers are suggested
to dampen noise and minor vibration from
suspended high speed equipment (1200 RPM or
greater). To be used in-line with all thread rod for
single and trapeze type support systems.
Features: Color-coded neoprene in-shear insert
for load identification. Loads to 2000 Lbs. (8.89kN)
with deflections to .50" (12.7mm). RH hangers are
available with a 30° rod swing (must specify).
Hanger units are shipped assembled.
Typical Applications: Suspended mechanical
equipment, exhaust fans, ductwork, piping,
ceilings, etc. When equipment is suspended from
vibration sensitive spans, avoid using RH type
hangers. Higher deflection hangers such as the
HS and HES series are recommended.
Note: Vibration hangers should not come in direct
contact with equipment being suspended.
W
W/2
L/2
L
Heavy Duty
'A' Diameter Hole
Hanger Box
for Maximum 'B' Diameter
Hanger Rod
Steel Washer
H 3"
Double Deflection (76.2)
Neoprene Element
F
RHC-Green 175-300 (.78-1.33) .50" (12.7) 23/4" 2" 41/2" 2" 3/4" 5/8"
(69.8) (50.8) (114.3) (50.8) (19.0) (15.9) 3.0 (1.4)
RHC-Purple 300-700 (1.33-3.11) .50" (12.7)
RHD-Yellow 700-1100 (3.11-4.90) .50" (12.7) 3" 2" 7" 2" 3/4" 5/8"
(76.2) (50.8) (177.8) (50.8) (19.0) (15.9) 4.0 (1.8)
RHD-Pink 1100-2000 (4.90-8.90) .50" (12.7)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Note: Spring devices are stable with a vertical and horizontal spring constant equal to one (Kx/Ky=1). A
50% additional run-out from rated capacity to solid load is also characteristic of spring type isolators.
Ceiling
Threaded Rod
(By Contractor)
I E
S Q
O U
L I
H
A P
Free
T M
Height
I E
O N
N T
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Dimensions Wt.
Part O.D. Size Pipe Size A B C Each
No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kg)
BVT025 1/4" (6.3) 1/8" (3) 1.22" (30.9) 0.19" (4.8) 0.49" (12.4) .11 (.05)
BVT037 3/8" (9.5) 1/4" (6) 1.36" (34.5) 0.25" (6.3) 0.61" (15.5) .12 (.05)
BVT050 1/2" (12.7) 3/8" (10) 1.49" (37.8) 0.31" (7.8) 0.74" (18.8) .14 (.06)
BVT062 5/8" (15.9) 1/2" (15) 1.62" (41.1) 0.38" (9.6) 0.86" (21.8) .15 (.07)
BVT075 3/4" (19.0) 5/8" (17) 1.87" (47.4) 0.50" (12.7) 1.15" (29.2) .19 (.08)
BVT087 7/8" (22.2) 3/4" (20) 2.00" (50.8) 0.56" (14.2) 1.27" (32.2) .21 (.09)
BVT112 11/8" (28.6) 1" (25) 2.25" (57.1) 0.69" (17.5) 1.52" (38.6) .26 (.12)
BVT137 13/8" (34.9) 11/4" (32) 2.51" (63.7) 0.81" (20.6) 1.78" (45.2) .38 (.17)
BVT162 15/8" (41.3) 11/2" (40) 3.00" (76.2) 1.00" (25.4) 2.20" (55.9) .40 (.18)
BVT212 21/8" (54.0) 2" (50) 3.52" (89.4) 1.25" (31.7) 2.70" (68.6) .55 (.25)
BVT262 25/8" (66.6) 21/2" (65) 4.02" (102.1) 1.50" (38.1) 3.20" (81.3) .55 (.25)
BVT312 31/8" (79.4) 3" (80) 4.53" (115.0) 1.75" (44.4) 3.70" (93.9) .64 (.29)
BVT362 35/8" (92.1) 31/2" (90) 5.05" (128.2) 2.00" (50.8) 4.23" (107.4) .76 (.34)
BVT412 41/8" (104.8) 4" (100) 5.55" (140.9) 2.25" (57.1) 4.73" (120.1) .93 (.42)
BVT612 61/8" (155.5) 6" (150) 7.62" (193.5) 3.25" (82.5) 6.74" (171.1) 1.36 (.61)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Design C
Load 3
Dimensions Wt.
Part O.D. Size Pipe Size A B C Each
No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kg)
BVP025 0.540" (13.7) 1/4" (6) 1.61" (39.9) 0.37" (9.4) 0.87" (22.1) .15 (.07)
BVP037 0.675" (17.1) 3/8" (10) 1.86" (47.2) 0.50" (12.7) 1.15" (29.2) .18 (.08)
BVP050 0.875" (22.2) 1/2" (15) 1.99" (50.5) 0.56" (14.2) 1.27" (32.3) .20 (.09)
BVP075 1.050" (26.7) 3/4" (20) 2.25" (57.1) 0.69" (17.5) 1.52" (38.6) .21 (.09)
BVP100 1.312" (33.3) 1" (25) 2.51" (63.8) 0.81" (20.6) 1.77" (45.0) .20 (.09)
BVP125 1.660" (42.2) 11/4" (32) 3.00" (76.2) 1.00" (25.4) 2.21" (56.1) .36 (.16)
BVP150 1.900" (48.3) 11/2" (40) 3.21" (81.5) 1.12" (28.4) 2.41" (61.2) .40 (.18)
BVP200 2.375" (60.3) 2" (50) 3.77" (95.8) 1.37" (34.8) 2.96" (75.2) .45 (.20)
BVP250 2.875" (73.0) 21/2" (65) 4.28" (108.7) 1.62" (41.1) 3.46" (87.9) .54 (.24)
BVP300 3.500" (88.9) 3" (80) 5.05" (128.3) 2.00" (50.8) 4.24" (107.7) .81 (.37)
BVP350 4.000" (101.6) 31/2" (90) 5.55" (140.9) 2.25" (57.1) 4.74" (120.3) .87 (.39)
BVP400 4.500" (114.3) 4" (100) 6.05" (153.7) 2.50" (63.5) 5.24" (133.1) 1.09 (.49)
BVP500 5.563" (141.3) 5" (125) 6.84" (173.7) 3.00" (76.2) 6.24" (158.4) 1.36 (.61)
BVP600 6.625" (168.3) 6" (150) 8.24" (209.3) 3.56" (90.4) 7.36" (186.9) 1.63 (.74)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B1999
• Ideal Isolation Material
Vibra Cushion™ • Inhibits Galvanic Corrosion
• Dampens Sound and Vibration
• Service Temperature Range
-75° F (-60°C) to +375°F (+190°C)
Packaged 20 Ft.
per carton.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Vibra Trol
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
DURA-BLOK is made from 100% recycled rubber and qualifies for LEED credits. Reflective strips on both sides
allow for easy product visibility.
Channels are through bolted on all sizes for added strength and a 1” (25.4mm) gap between blocks allows water to
flow freely around longer assemblies.
Product composition is not sharp or abrasive, helping to extend the roof life and no penetration through the roof is
required.
The DURA-BLOK dampens vibration, needs no supplemental rubber pad, and will not float or blow away.
DURA-BLOK can be used to support piping, HVAC/Ducts, roof walkways, conduit and cable tray.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Rooftop Supports
DURA-BLOK
DBP DBM
Base Only
Dimensions - 4” (101mm) High x 6” (152mm) Wide x Base Length
Material - 100% recycled rubber, UV resistant
Ultimate Load Capacity - (uniform load) *
DBP = 500 lbs. (2.22kN)
DBM = 200 lbs. (0.89kN)
DURA-BLOK channel support is designed as an economical support for piping systems, cable tray, HVAC
equipment and many other applications. The DURA-BLOK is UV resistant and is suitable for any type of
roofing material or other flat surfaces. Material effectively accepts screw fasteners for securing accessories.
* For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs,
the weakest point may be the insulation board beneath the rubber membrane.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
DB10
DB30
DURA-BLOK DB-Series channel support is designed for superior support of piping systems, cable tray, HVAC equipment,
walkway systems and many other applications. The DURA-BLOK is UV resistant and suitable for installation on any type of
roofing material or other flat surfaces. For sloped roofs see adjustable hinge fitting (B634).
For pipe straps/clamps, rollers and roller supports that can be used with these DURA-BLOK supports, see page 284.
* For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs,
the weakest point may be the insulation board beneath the rubber membrane.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
DB6 - Series
Rooftop Supports
DURA-BLOK
DB610
DB630
DURA-BLOK DB6-Series channel support is designed for superior support of piping systems, cable tray, HVAC equipment,
walkway systems and many other applications. The DURA-BLOK is UV resistant and suitable for installation on any type of
roofing material or other flat surfaces. For sloped roofs see adjustable hinge fitting (B634).
For pipe straps/clamps, rollers and roller supports that can be used with these DURA-BLOK supports, see page 284.
* For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs,
the weakest point may be the insulation board beneath the rubber membrane.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
DB10-36
DB10-50
Two (2) Bases with 12 ga. (2.6mm) Galv. Channel - 15/8” (41mm) high
Dimensions - 55/8” (143mm) High x 6” (152mm) Wide x Length (overall length)
Material - 100% recycled rubber, UV resistant
Ultimate Load Capacity - 1,000 lbs. (4.45kN) (uniform load) *
DURA-BLOK DB10-Series channel support is designed for superior support of piping systems, cable tray, HVAC
equipment, walkway systems and many other applications. The DURA-BLOK is UV resistant and suitable for installation
on any type of roofing material or other flat surfaces.
For pipe straps/clamps, rollers and roller supports that can be used with these DURA-BLOK supports, see page 284.
* For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs,
the weakest point may be the insulation board beneath the rubber membrane.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Rooftop Supports
DURA-BLOK
Threaded Rod and Hinged Pipe Clamp
Dimensions - Height to Pipe Center x 6” (152mm) Wide x
4.8” (122mm) Long (overall length)
Material - 100% recycled rubber, UV resistant
Pipe Clamp Material - Malleable Iron -
Pipe Sizes - Electro Plated
Copper Tubing Sizes - Dura Copper™
Threaded Rod/Hardware - Electro Plated Steel
Ultimate Load Capacity - 50 lbs. (0.22kN) (uniform load) *
DBM-2CT
* For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs,
the weakest point may be the insulation board beneath the rubber membrane.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B + 4.5” (114mm)
DB2318DS
Height
(overall)
Length
Width (overall)
(overall)
DB2924DS
DB5336DS
Two (2) Base Supports with 12 ga. (2.6mm) Galv. Channel - 15/8” (41mm) high
Riser Channels (SH Style) - 15/8” (41mm) x 15/8” (41mm) x 12 ga. (2.6mm)
Fittings & Hardware - Electro-Plated Steel
Dimensions - Height (overall) x Width (overall) x Length (overall)
Material - 100% recycled rubber, UV resistant
Ultimate Load Capacity - 1,000 lbs. (4.45kN) (uniform load) *
DURA-BLOK DB__DS-Series channel support with risers is designed for superior support of piping systems, cable tray, HVAC
equipment, walkway systems and many other applications. The DURA-BLOK is UV resistant and suitable for installation on any
type of roofing material or other flat surfaces.
For pipe straps/clamps, rollers and roller supports that can be used with these DURA-BLOK supports, see page 284.
* For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs,
the weakest point may be the insulation board beneath the rubber membrane.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Rooftop Supports
DURA-BLOK
Part No. A (Minimum) A (Maximum) B Weight Each
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Fixed Height Base with 14 ga. (1.9mm) Galv. Channel - 1” (25.4mm) high and Pipe
Roller Assembly
Dimensions - Height to Bottom of Pipe x 6” (152mm) Wide x
Long (overall length)
Material - 100% recycled rubber, UV resistant
Pipe Roller Material - Cast Iron - Electro Plated
Brackets, Axle, & Hardware - Electro Plated Steel
Ultimate Load Capacity - (uniform load) *
DBR2-31/2 = 500 lbs. (2.22kN)
DBR4-6 DBR4-6 = 500 lbs. (2.22kN)
DBR8-10 = 1000 lbs. (4.44kN)
DBR12-14 = 1000 lbs. (4.44kN)
DBR16-20 = 1000 lbs. (4.44kN)
DBR16-20
† See Pipe Hanger Catalog for dimensions and specifications. ** From bottom of rubber block to bottom of pipe/tubing.
* For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs,
the weakest point may be the insulation board beneath the rubber membrane.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Rooftop Supports
Threaded Rod Risers and a B3114-31/2 Pipe Roll with Sockets
DURA-BLOK
Adjustable Height
Dimensions - Overall Height 12” (305mm) from bottom of base to pipe contact
point on roller.
Base - 4” High (101mm) x 6” (152mm) Wide x 9.6” (244mm) Length (base length)
Material - 100% recycled rubber, UV resistant
Pipe Roll & Sockets - For up to 31/2” (90mm) pipe sizes.
Ultimate Load Capacity - 200 lbs. (0.89kN) * (To
increase load capacity use CLDP10 load distribution plate.)
DBE - Series Base with two (2) 1/2”-13 Electro Zinc All
Threaded Rod Risers and 14 ga. (1.9mm) Galv.
Slotted Channel - 1” (25mm) high
Dimensions - Overall Height as Specified
Base - 4” High (101mm) x 6” (152mm) Wide x 9.6” (244mm) Length (base length)
Material - 100% recycled rubber, UV resistant
Ultimate Load Capacity - 200 lbs. (0.89kN) * (To increase load capacity
use CLDP10 load distribution plate.)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Load Distribution Plate Dimensions - 15/8” (41mm) Wide x 61/2” (165mm) Long
Material - 11 Ga. steel (3.0mm)
Increases ultimate uniform load capacity on DBE & DBR Series supports to 500
lbs. (2.22kN)
DURA-BLOK CLDP10 load bearing stabilizer plate increases load ratings for DBE
Series and DBR Series supports by allowing the load from the threaded rods to be
distributed over the length of the base instead of the point load where the rods
attach to the base.
Loosen hex nuts and slide Part No. Thickness Width Length
plate under the flat washers
CLDP10 11 Ga. (3.05mm) 15/8” (41mm) 91/2” (241mm)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Rooftop Supports
Compatible Components Available to make DURA-BLOK bases more versatile
DURA-BLOK
BTS
TN Nuts B22TH B22SH
HHCS
B634
NE
B-LI50
B3124
P
BVP12”.I.
1 1/
Series
B2000 Series B2400
B101 B104 BVT Series
Series
Above rollers can be mounted on DB Series, DB6 Series, and DB10 Series units.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
The new KwikWire Hanging System is a flexible replacement for jack chain and all thread rod. The KwikWire
System will slash your hanging time and the clamp can be easily adjusted by hand.
Some of the key benefits of using the new KwikWire System include:
• Installs up to 50% faster - can quickly wrap around beam with no drilling required
• Simple height adjustments are made by releasing the clamp’s adjustment pin – no tools required
• Aesthetic appeal - blends in with upper structural supports
• Compatibility with many B-Line fastener, anchor and hanger products
• Ideal for sloped ceiling applications - will support loads at up to a 60° angle from vertical
Applications for the KwikWire Hanging System include light fixture supports, HVAC duct supports, sway bracing,
sign/banner supports, wire basket cable tray supports, bus duct supports and air handling equipment supports.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
KwikWire Clamps
For Use With Wire Box
Part No. Rope Diameters Qty.
BKC100 1/16” (1.6mm) & 3/32” (2.3mm) 100
BKC200 1/8” (3.2mm) & 3/16” (4.8mm) 50
See table below for KwikWire
KwikWire
Clamp Working Loads
KwikWire Clamp
Working Loads* * Working loads shown
Clamp Wire Lbs. are for hanging vertically.
Part No. Rope Safety For suspending at 15° = 96%
Dia. Factor 5
15°, 30°, 45° or 60° 30° = 86%
BKC100 1/16” 0-75 angles from vertical, use 45° = 70%
BKC100 3/32” 25-150 the following percentage 60° = 50%
of the working loads from
BKC200 1/8” 25-250 the chart:
BKC200 3/16” 50-640
Instructions for installing the wire rope in the clamp - No tools are required.
1 2 3 4 5
Pass the wire rope Loop wire rope Pass wire rope back Push wire rope through To adjust, remove tension
through the KwikWire through/around through KwikWire clamp leaving 2” to 3” and pull wire rope slightly
Clamp support Clamp tail, then apply tension to disengage teeth, slide
on wire rope adjustment pin in direction
shown by arrow to release
wire rope.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
BKCC 1
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
KwikWire
• Ideal for supporting light 3/32” (2.3) 90 (40.8)
fixtures, wire basket cable
tray, HVAC ducts, and
sign/banner supports.
• Allows for tool-less adjustment
of wire rope.
1 2 3
4 5 6
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Examples
BKYT18-094-120K
BK Y T 18 - 094 - 120 K
Cooper B-Line KwikWire Accessory
2 legs - toggle leg termination - 18” legs - 3/32” diameter wire - 120” straight length - kit with clamp
BKL-063-120K
BK L - 063 - 120 K
Cooper B-Line KwikWire Accessory
single leg - looped leg termination - 1/16” diameter wire - 120” straight length - kit with clamp
Custom assemblies are available as shown by the red dot on pages 290 - 293.
Lead time on custom assemblies is 2 to 3 weeks depending on quantities.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
KwikWire
BKL-063-120 1/16” (1.6) 120” (3048)
BKL-063-180 1/16” (1.6) 180” (4572)
BKL-063-240 1/16” (1.6) 240” (6096)
BKL-063-360 1/16” (1.6) 360” (9144)
• Available as a wire rope with loop termination only or as a ready-to-use kit with a BKC100 clamp.
• Available in lengths of 40”, 80”, 120”, 180”, 240”, and 360”.
= Stock item, lead time 2 - 3 working days = Non-stock item, lead time 10 - 15 working days
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Box Quantity - 10
5 bags containing 2 pieces per bag
= Stock item, lead time 2 - 3 working days = Non-stock item, lead time 10 - 15 working days
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
KwikWire
BKYH18-094-180 18” (457) 3/32” (2.3) 180” (4572)
BKYH18-094-240 18” (457) 3/32” (2.3) 240” (6096)
BKYH18-094-360 18” (457) 3/32” (2.3) 360” (9144)
= Stock item, lead time 2 - 3 working days = Non-stock item, lead time 10 - 15 working days
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Box Quantity - 20
5 bags containing 4 pieces per bag
Box Quantity - 20
5 bags containing 4 pieces per bag
• Available as a wire rope with angle bracket termination only or as a ready-to-use kit with a BKC100 clamp.
• Available in lengths of 40”, 80”, 120”, 180”, 240”, and 360”.
= Stock item, lead time 2 - 3 working days = Non-stock item, lead time 10 - 15 working days
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
KwikWire
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Angle Length
degree radian (rad) 1.745329 x 10-2 foot (ft) meter (m) 3.048000 x 10-1
radian (rad) degree 5.729578 x 10+1 inch (in) meter (m) 2.540000 x 10-2
mil meter (m) 2.540000 x 10-5
Area
inch (in) micrometer (μm) 2.540000 x 10+4
foot2 square meter (m2) 9.290304 x 10-2
meter (m) foot (ft) 3.280840
inch2 square meter (m2) 6.451600 x 10-4
meter (m) inch (in) 3.937008 x 10+1
circular mil square meter (m2) 5.067075 x 10-10
meter (m) mil 3.937008 x 10+4
sq. centimeter (cm2) square inch (in2) 1.550003 x 10-1
micrometer (μm) inch (in) 3.937008 x 10-5
square meter (m2) foot2 1.076391 x 10+1
square meter (m2) inch2 1.550003 x 10+3 Volume
square meter (m2) circular mil 1.973525 x 10+9 foot3 cubic meter (m3) 2.831685 x 10-2
inch3 cubic meter (m3) 1.638706 x 10-5
Temperature
cubic centimeter (cm3) cubic inch (in3) 6.102374 x 10-2
degree Fahrenheit degree Celsius t°C = (t°F - 32) / 1.8
cubic meter (m3) foot3 3.531466 x 10+1
degree Celsius degree Fahrenheit t°F = 1.8 t°C + 32
cubic meter (m3) inch3 6.102376 x 10+4
Reference Data
Decimals of a Foot
Inch 0" 1" 2" 3" 4" 5" 6" 7" 8" 9" 10" 11"
0 .0000 .0833 .1667 .2500 .3330 .4167 .5000 .5833 .6667 .7500 .8333 .9167
1/16 .0052 .0085 .1719 .2552 .3385 .4219 .5052 .5885 .6719 .7552 .8385 .9219
1/8 .0104 .0938 .1771 .2604 .3438 .4271 .5104 .5938 .6771 .7604 .8438 .9271
3/16 .0156 .0990 .1823 .2656 .3490 .4323 .5156 .5990 .6823 .7656 .8490 .9323
1/4 .0208 .1042 .1875 .2708 .3542 .4375 .5208 .6042 .6875 .7708 .8542 .9375
5/16 .0260 .1094 .1927 .2760 .3594 .4427 .5260 .6094 .6927 .7760 .8594 .9427
3/8 .0313 .1146 .1979 .2812 .3646 .4479 .5313 .6146 .6979 .7813 .8646 .9479
7/16 .0365 .1198 .2031 .2891 .3724 .4557 .5391 .6224 .7057 .7891 .8724 .9557
1/2 .0417 .1250 .2083 .2917 .3750 .4583 .5417 .6250 .7083 .7917 .8750 .9583
9/16 .0469 .1302 .2135 .2969 .3802 .4635 .5469 .6302 .7135 .7969 .8802 .9635
Reference Data
5/8 .0521 .1354 .2188 .3021 .3854 .4688 .5521 .6354 .7188 .8021 .8854 .9688
11/16 .0573 .1406 .2240 .3073 .3906 .4740 .5573 .6406 .7240 .8073 .8906 .9740
3/4 .0625 .1458 .2292 .3125 .3958 .4792 .5625 .6458 .7292 .8125 .8958 .9792
13/16 .0677 .1510 .2344 .3177 .4010 .4844 .5677 .6510 .7344 .8177 .9010 .9844
7/8 .0729 .1563 .2396 .3229 .4063 .4896 .5729 .6563 .7396 .8229 .9063 .9896
15/16 .0781 .1615 .2448 .3281 .4118 .4948 .5781 .6615 .7448 .8221 .9115 .9948
Decimals of a Foot
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
3/8" (10) .675 (17.1) .091 (2.3) .6 (.9) .7 (1.0) 7 (2.13) 3/8"-16
1/2" (15) .840 (21.3) .109 (2.7) .8 (1.2) .9 (1.3) 7 (2.13) 3/8"-16
3/4" (20) 1.050 (26.7) .113 (2.9) 1.1 (1.7) 1.3 (2.0) 7 (2.13) 3/8"-16
1" (25) 1.315 (33.4) .133 (3.4) 1.7 (2.5) 2.1 (3.0) 7 (2.13) 3/8"-16
11/4" (32) 1.660 (42.1) .140 (3.5) 2.3 (3.4) 2.9 (4.3) 7 (2.13) 3/8"-16
11/2" (40) 1.900 (48.2) .145 (3.7) 2.7 (4.0) 3.6 (5.3) 9 (2.74) 3/8"-16
2" (50) 2.375 (60.3) .154 (3.9) 3.6 (5.4) 5.0 (7.5) 10 (3.05) 3/8"-16
21/2" (65) 2.875 (73.0) .203 (5.1) 5.8 (8.6) 7.9 (11.7) 11 (3.35) 1/2"-13
3" (80) 3.500 (88.9) .216 (5.5) 7.6 (11.2) 10.8 (15.9) 12 (3.66) 1/2"-13
31/2" (90) 4.000 (101.6) .226 (5.7) 9.1 (13.5) 13.4 (19.8) 13 (3.96) 1/2"-13
4" (100) 4.500 (114.3) .237 (6.0) 10.8 (16.0) 16.3 (24.2) 14 (4.27) 5/8"-11
Reference Data
5" (125) 5.563 (141.3) .258 (6.5) 14.6 (21.7) 23.2 (34.6) 16 (4.87) 5/8"-11
6" (150) 6.625 (168.3) .280 (7.1) 19.0 (28.2) 31.5 (46.8) 17 (5.18) 3/4"-10
8" (200) 8.625 (219.1) .322 (8.2) 28.5 (42.5) 50.1 (74.6) 19 (5.79) 3/4"-10
10" (250) 10.750 (273.0) .365 (9.3) 40.5 (60.2) 74.6 (110.9) 22 (6.69) 7/8"-9
12" (300) 12.750 (323.8) .406 (10.3) 51.1 (75.9) 102.1 (151.9) 23 (7.01) 7/8"-9
14" (350) 14.000 (355.6) .437 (11.1) 63.0 (93.7) 121.5 (180.7) 25 (7.62) 1"-8
16" (400) 16.000 (406.4) .500 (12.7) 83.0 (123.5) 159.5 (237.3) 27 (8.23) 1"-8
18" (450) 18.000 (457.2) .563 (14.3) 105.0 (156.2) 202.2 (300.8) 28 (8.53) 1"-8
20" (500) 20.000 (508.0) .593 (15.1) 123.0 (183.0) 243.4 (361.8) 30 (9.14) 11/4"-7
24" (600) 24.000 (609.6) .687 (17.4) 171.0 (254.5) 345.2 (513.7) 32 (9.75) 11/4"-7
3/8" (10) .675 (17.1) .126 (3.2) .7 (1.1) .8 (1.2) 7 (2.13) 3/8"-16
1/2" (15) .840 (21.3) .147 (3.7) 1.1 (1.6) 1.2 (1.7) 7 (2.13) 3/8"-16
3/4" (20) 1.050 (26.7) .154 (3.9) 1.5 (2.2) 1.7 (2.5) 7 (2.13) 3/8"-16
1" (25) 1.315 (33.4) .179 (4.5) 2.2 (3.2) 2.5 (3.6) 7 (2.13) 3/8"-16
11/4" (32) 1.660 (42.1) .191 (4.8) 3.0 (4.4) 3.5 (5.2) 7 (2.13) 3/8"-16
11/2" (40) 1.900 (48.2) .200 (5.1) 3.6 (5.4) 4.3 (6.5) 9 (2.74) 3/8"-16
2" (50) 2.375 (60.3) .218 (5.5) 5.0 (7.5) 6.3 (9.4) 10 (3.05) 3/8"-16
21/2" (65) 2.875 (73.0) .276 (7.0) 7.6 (11.4) 9.4 (14.1) 11 (3.35) 1/2"-13
3" (80) 3.500 (88.9) .300 (7.6) 10.2 (15.2) 13.0 (19.4) 12 (3.66) 1/2"-13
31/2" (90) 4.000 (101.6) .318 (8.1) 12.5 (18.6) 16.3 (24.3) 13 (3.96) 1/2"-13
4" (100) 4.500 (114.3) .337 (8.5) 15.0 (22.3) 20.0 (29.7) 14 (4.27) 5/8"-11
5" (125) 5.563 (141.3) .375 (9.5) 20.8 (30.9) 28.7 (42.6) 16 (4.87) 5/8"-11
6" (150) 6.625 (168.3) .432 (11.0) 28.6 (42.5) 39.9 (59.3) 17 (5.18) 3/4"-10
8" (200) 8.625 (219.1) .500 (12.7) 43.4 (64.5) 63.1 (93.9) 19 (5.79) 3/4"-10
10" (250) 10.750 (273.0) .593 (15.0) 64.4 (95.8) 95.5 (142.1) 22 (6.69) 7/8"-9
12" (300) 12.750 (323.8) .687 (17.4) 88.6 (131.8) 132.6 (197.3) 23 (7.01) 7/8"-9
14" (350) 14.000 (355.6) .750 (19.0) 107.0 (159.2) 158.2 (235.4) 25 (7.62) 1"-8
16" (400) 16.000 (406.4) .843 (21.4) 137.0 (203.9) 206.7 (306.6) 27 (8.23) 1"-8
18" (450) 18.000 (457.2) .937 (23.8) 171.0 (254.5) 259.5 (386.2) 28 (8.53) 1"-8
20" (500) 20.000 (508.0) 1.031 (26.2) 209.0 (311.0) 318.4 (473.8) 30 (9.14) 11/4"-7
24" (600) 24.000 (609.6) 1.218 (30.9) 297.0 (442.0) 455.2 (677.4) 32 (9.75) 11/4"-7
Based on ASTM A53-86. Based on MSS SP-69 Table 3 & 4.
1 cubic ft. of water weighs 62.41 lbs. *Many codes require pipe hangers to be spaced every 10' (3.048 meters)
1 gallon (U.S.) weighs 8.335 lbs. regardless of size. Check local codes.
1 cubic meter of water weighs 999.97 kg. Spacing and capacities are based on water filled pipe. Closer hanger spacing
1 liter weighs .999 kg. may be required where additional valves and fittings increase the load.
3" (80) 53 3.96 (100.6) .31 (7.9) 11.2 (16.6) 15.0 (22.2)
4" (100) 53 4.80 (121.9) .32 (8.1) 14.2 (21.1) 20.1 (29.9)
6" (150) 53 6.90 (175.2) .34 (8.6) 22.0 (32.7) 35.1 (52.2)
8" (200) 53 9.05 (229.9) .36 (9.1) 31.0 (46.1) 54.0 (80.3)
10" (250) 53 11.10 (281.9) .38 (9.6) 40.4 (60.1) 76.8 (114.2)
12" (300) 53 13.20 (335.3) .40 (10.1) 50.7 (75.4) 103.0 (153.2)
14" (350) 53 15.30 (388.6) .42 (10.6) 62.4 (92.8) 133.5 (198.6)
16" (400) 53 17.40 (441.9) .43 (10.9) 72.8 (108.3) 165.9 (246.8)
18" (450) 53 19.50 (495.3) .44 (11.1) 83.6 (124.4) 201.5 (299.8)
20" (500) 53 21.60 (548.6) .45 (11.4) 95.2 (141.7) 241.0 (358.7)
24" (600) 53 25.80 (655.3) .47 (11.9) 119.2 (177.4) 329.4 (490.2)
Reference Data
30" (750) 53 32.00 (812.8) .51 (12.9) 161.3 (240.0) 487.8 (597.1)
36" (900) 53 38.30 (972.8) .58 (14.7) 219.5 (326.6) 688.8 (1025.0)
42" (1050) 53 44.50 (1130.3) .65 (16.5) 285.2 (424.4) 920.1 (1369.2)
48" (1200) 53 50.80 (1290.3) .72 (18.3) 360.3 (536.2) 1189.2 (1769.7)
54" (1350) 53 57.10 (1450.3) .81 (20.6) 455.0 (677.1) 1502.2 (2135.5)
3" (80) 31/2 31/2 31/2 31/2 31/2 2 to 31/2 2 to 31/2 2 to 31/2
4" (100) 4 4 4 4 4 4 to 6 4 to 6 4 to 6
6" (150) 6 6 6 6 6
8" (200) 10 8 8 8 8 8 to 10 8 to 10 8 to 10
10" (250) 12 10 10 10 10
12" (300) 12 12 12 12 12 12 to 14 12 to 14 12 to 14
14" (350) 16 14 14 14 14
16" (400) 18 16 16 16 16
18" (450) 20 18 18 18 18 16 to 20 16 to 20 16 to 20
20" (500) 24 20 20 20 20
24" (600) 30 24 24 24 24 --- --- 24
Ductile Iron
Pipe Size B3118SL B3119SL B218 B219 B379 B479 B3114R B3117R
In. mm
3" (80) 2 to 31/2 2 to 31/2 B218 B219-1 --- --- 31/2 2 to 31/2
4" (100) 4 to 6 4 to 6 B218 B219-2 --- --- 4 4 to 6
6" (150) B218 B219-3 B379 --- 6
8" (200) 8 to 10 8 to 10 --- B219-4 B379 --- 8 8 to 10
10" (250) --- B219-4 B379 --- 10
12" (300) 12 to 14 12 to 14 --- B219-5 B379 --- 12 12 to 14
14" (350) --- --- B379 --- 14
16" (400) --- --- B379 B479 16
18" (450) 16 to 20 16 to 20 --- --- --- B479 18 16 to 20
20" (500) --- --- --- B479 20
24" (600) 24 24 --- --- --- B479 24 24
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
2" (50) 2.25 (57.1) .17 (4.3) 4.0 (5.9) 5.5 (8.1)
3" (80) 3.25 (82.5) .17 (4.3) 6.0 (8.9) 9.4 (13.9)
4" (100) 4.25 (107.9) .18 (4.6) 8.0 (11.9) 14.2 (21.1)
5" (125) 5.25 (133.3) .18 (4.6) 10.4 (15.5) 22.7 (33.8)
6" (150) 6.25 (158.7) .18 (4.6) 13.0 (19.3) 26.9 (40.0)
8" (200) 8.38 (212.8) .23 (5.8) 20.0 (29.7) 45.7 (67.9)
10" (250) 10.50 (266.7) .28 (7.1) 29.0 (43.1) 69.6 (103.5)
12" (300) 12.50 (317.5) .28 (7.1) 38.0 (56.5) 96.2 (143.1)
15" (380) 15.62 (396.7) .31 (7.9) 51.0 (75.9) 147.6 (219.6)
Extra Weight Cast Iron Soil Pipe Data (Bell and Spigot Type)
Nominal O.D. of Wall Weight of Pipe
Pipe Size Cast Iron Pipe Thickness Weight of Pipe Filled With Water
In. mm In. mm In. mm Lbs./Ft. kg/m Lbs./Ft. kg/m
2" (50) 2.38 (60.4) .190 (4.8) 5.0 (7.2) 6.6 (9.5)
3" (80) 3.50 (88.9) .250 (6.3) 9.0 (13.0) 12.7 (18.3)
4" (100) 4.50 (114.3) .250 (6.3) 12.0 (17.4) 18.5 (26.8)
5" (125) 5.50 (139.7) .250 (6.3) 15.0 (21.7) 25.2 (36.5)
6" (150) 6.50 (165.1) .250 (6.3) 19.0 (27.5) 33.7 (48.8)
8" (200) 8.62 (218.9) .310 (7.9) 30.0 (43.4) 56.1 (81.2)
10" (250) 10.75 (273.0) .375 (9.5) 43.0 (62.3) 83.8 (121.4)
12" (300) 12.75 (323.8) .375 (9.5) 54.0 (78.2) 112.8 (163.3)
15" (380) 15.88 (403.3) .440 (11.2) 75.0 (108.6) 166.8 (241.5)
11/2" (40) 1.90 (48.2) .16 (4.0) 2.7 (4.0) 6.2 (9.2)
2" (50) 2.35 (59.7) .16 (4.0) 3.6 (5.3) 8.6 (12.5)
3" (80) 3.35 (85.1) .16 (4.0) 5.2 (7.7) 13.5 (20.0)
4" (100) 4.38 (111.2) .19 (4.8) 7.4 (11.0) 20.2 (30.0)
5" (125) 5.30 (134.6) .19 (4.8) 9.6 (14.3) 27.5 (41.0)
6" (150) 6.30 (160.0) .19 (4.8) 11.0 (16.3) 34.0 (50.5)
8" (200) 8.38 (212.8) .23 (5.8) 18.0 (26.8) 57.5 (85.6)
1/4" (6) .375 (9.5) .030 (.7) .12 (.17) .15 (.21)
3/8" (10) .500 (12.7) .035 (.9) .20 (.30) .26 (.39)
1/2" (15) .625 (15.9) .040 (1.0) .28 (.41) .38 (.56)
5/8" (17) .750 (19.0) .042 (1.0) .36 (.53) .51 (.75)
3/4" (20) .875 (22.2) .045 (1.1) .45 (.67) .66 (.98)
1" (25) 1.125 (28.6) .050 (1.3) .65 (.97) 1.01 (1.50)
11/4" (32) 1.375 (34.9) .055 (1.4) .88 (1.31) 1.42 (2.11)
11/2" (40) 1.625 (41.3) .060 (1.5) 1.14 (1.69) 1.91 (2.83)
2" (50) 2.125 (54.0) .070 (1.8) 1.75 (2.60) 3.09 (4.59)
21/2" (65) 2.625 (66.7) .080 (2.0) 2.48 (3.69) 4.54 (6.75)
3" (80) 3.125 (79.4) .090 (2.3) 3.33 (4.95) 6.28 (9.34)
Reference Data
31/2" (90) 3.625 (92.1) .100 (2.5) 4.29 (6.38) 8.28 (12.32)
4" (100) 4.125 (104.8) .110 (2.8) 5.38 (8.00) 10.57 (15.72)
5" (125) 5.125 (130.2) .125 (3.2) 7.61 (11.32) 15.69 (23.34)
6" (150) 6.125 (155.6) .140 (3.5) 10.20 (15.18) 21.81 (32.46)
8" (200) 8.125 (206.4) .200 (5.1) 19.29 (28.70) 39.49 (58.89)
1/4" (6) .375 (9.5) .035 (.9) .14 (.21) .17 (.25)
3/8" (10) .500 (12.7) .049 (1.2) .27 (.40) .32 (.47)
1/2" (15) .625 (15.9) .049 (1.2) .34 (.50) .43 (.63)
5/8" (17) .750 (19.0) .049 (1.2) .42 (.62) .56 (.83)
3/4" (20) .875 (22.2) .065 (1.6) .64 (.95) .83 (1.23)
1" (25) 1.125 (28.6) .065 (1.6) .84 (1.25) 1.18 (1.75)
11/4" (32) 1.375 (34.9) .065 (1.6) 1.04 (1.55) 1.57 (2.34)
11/2" (40) 1.625 (41.3) .072 (1.8) 1.36 (2.02) 2.10 (3.12)
2" (50) 2.125 (54.0) .083 (2.1) 2.06 (3.06) 3.37 (5.01)
21/2" (65) 2.625 (66.7) .095 (2.4) 2.92 (4.34) 4.92 (7.31)
3" (80) 3.125 (79.4) .109 (2.8) 4.00 (5.95) 6.96 (10.35)
31/2" (90) 3.625 (92.1) .120 (3.0) 5.12 (7.62) 9.02 (13.42)
4" (100) 4.125 (104.8) .134 (3.4) 6.51 (9.69) 11.57 (17.22)
5" (125) 5.125 (130.2) .160 (4.0) 9.67 (14.39) 17.67 (26.29)
6" (150) 6.125 (155.6) .192 (4.9) 13.87 (20.60) 25.07 (37.27)
8" (200) 8.125 (206.4) .271 (6.9) 25.90 (38.50) 45.40 (67.52)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Heavy Schedule
Nominal Wall Weight of Pipe
Pipe Size O.D. Size Thickness Weight of Pipe Filled With Water
In. mm In. mm In. mm Lbs./Ft. kg/m Lbs./Ft. kg/m
1/8" (3) .405 (10.3) .068 (1.7) .04 (.06) .06 (.09)
1/4" (6) .540 (13.7) .088 (2.2) .07 (.11) .11 (.17)
3/8" (10) .675 (17.1) .091 (2.3) .10 (.14) .18 (.26)
1/2" (15) .840 (21.3) .109 (2.7) .15 (.20) .25 (.40)
3/4" (20) 1.050 (26.7) .113 (2.9) .20 (.30) .40 (.60)
1" (25) 1.315 (33.4) .133 (3.4) .30 (.40) .70 (.90)
11/4" (32) 1.660 (42.1) .140 (3.5) .40 (.60) 1.00 (1.50)
11/2" (40) 1.900 (48.2) .145 (3.7) .50 (.70) 1.40 (2.00)
2" (50) 2.375 (60.3) .154 (3.9) .60 (.90) 2.00 (3.00)
21/2" (65) 2.875 (73.0) .203 (5.1) 1.00 (1.50) 3.10 (4.51)
3" (80) 3.500 (88.9) .216 (5.5) 1.30 (2.00) 4.50 (6.70)
Reference Data
31/2" (90) 4.000 (101.6) .226 (5.7) 1.60 (2.40) 5.90 (8.70)
4" (100) 4.500 (114.3) .237 (6.0) 1.90 (2.80) 7.40 (11.00)
5" (125) 5.563 (141.3) .258 (6.5) 2.80 (4.10) 11.40 (17.00)
6" (150) 6.625 (168.3) .280 (7.1) 3.30 (4.90) 15.40 (23.00)
8" (200) 8.625 (219.1) .322 (8.2) 5.30 (7.80) 26.90 (39.90)
10" (250) 10.750 (273.0) .366 (9.3) 7.50 (11.10) 41.60 (61.80)
12" (300) 12.750 (323.8) .406 (10.3) 10.00 (14.90) 58.50 (87.00)
1/8" (3) .405 (10.3) .095 (2.4) .05 (.08) .06 (.10)
1/4" (6) .540 (13.7) .119 (3.0) .09 (.14) .12 (.18)
3/8" (10) .675 (17.1) .126 (3.2) .10 (.19) .16 (.28)
1/2" (15) .840 (21.3) .147 (3.7) .10 (.20) .20 (.30)
3/4" (20) 1.050 (26.7) .154 (3.9) .20 (.40) .40 (.70)
1" (25) 1.315 (33.4) .179 (4.5) .40 (.50) .70 (.90)
11/4" (32) 1.660 (42.1) .191 (4.8) .50 (.80) 1.00 (1.60)
11/2" (40) 1.900 (48.2) .200 (5.1) .60 (.90) 1.30 (2.00)
2" (50) 2.375 (60.3) .218 (5.5) .90 (1.30) 2.20 (3.20)
21/2" (65) 2.875 (73.0) .276 (7.0) 1.30 (2.00) 3.10 (4.70)
3" (80) 3.500 (88.9) .300 (7.6) 1.80 (2.70) 4.60 (6.90)
31/2" (90) 4.000 (101.6) .318 (8.1) 2.20 (3.20) 6.00 (8.90)
4" (100) 4.500 (114.3) .337 (8.5) 2.60 (3.90) 7.60 (11.30)
5" (125) 5.563 (141.3) .375 (9.5) 4.10 (6.10) 12.00 (17.80)
6" (150) 6.625 (168.3) .432 (11.0) 5.00 (7.50) 16.30 (24.30)
8" (200) 8.625 (219.1) .500 (12.7) 8.00 (11.90) 27.80 (41.30)
10" (250) 10.750 (273.0) .593 (15.0) 11.90 (17.70) 43.20 (77.60)
12" (300) 12.750 (323.8) .687 (17.4) 16.30 (24.30) 60.30 (89.80)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
20°F (-6.6°C) 5.00 (1.52) 5.50 (1.67) 5.80 (1.77) 6.66 (2.03) 6.80 (2.07) 7.33 (2.23) 7.80 (2.38)
40°F (4.4°C) 4.75 (1.45) 5.25 (1.60) 5.50 (1.67) 6.33 (1.93) 6.50 (1.98) 7.00 (2.13) 7.50 (2.28)
60°F (15.5°C) 4.50 (1.37) 5.00 (1.52) 5.25 (1.60) 6.00 (1.83) 6.25 (1.90) 6.50 (1.98) 7.00 (2.13)
80°F (26.6°C) 4.25 (1.29) 4.66 (1.42) 5.00 (1.52) 5.50 (1.67) 5.80 (1.77) 6.25 (1.90) 6.80 (2.07)
100°F (37.8°C) 4.00 (1.22) 4.33 (1.32) 4.66 (1.42) 5.25 (1.60) 5.50 (1.67) 5.80 (1.77) 6.33 (1.93)
110°F (43.3°C) 3.75 (1.14) 4.00 (1.22) 4.33 (1.32) 4.80 (1.46) 5.25 (1.60) 5.50 (1.67) 5.80 (1.77)
120°F (48.9°C) 3.33 (1.01) 3.75 (1.14) 3.80 (1.16) 4.50 (1.37) 4.75 (1.45) 5.00 (1.52) 5.33 (1.62)
130°F (54.4°C) 3.00 (.91) 3.33 (1.01) 3.50 (1.06) 4.00 (1.22) 4.25 (1.29) 4.50 (1.37) 4.80 (1.46)
140°F (60.0°C) 2.66 (.81) 2.80 (.85) 3.00 (.91) 3.50 (1.06) 3.66 (1.11) 3.80 (1.16) 4.25 (1.29)
150°F (65.5°C) 2.00 (.61) 2.25 (.68) 2.50 (.76) 2.80 (.85) 3.00 (.91) 3.25 (.99) 3.50 (1.06)
20°F (-6.6°C) 5.75 (1.75) 6.33 (1.93) 6.66 (2.03) 7.00 (2.13) 7.80 (2.38) 8.20 (2.50) 8.66 (2.64) 9.80 (2.99)
40°F (4.4°C) 5.50 (1.67) 6.00 (1.83) 6.33 (1.93) 6.50 (1.98) 7.50 (2.28) 7.75 (2.36) 8.25 (2.51) 9.33 (2.84)
60°F (15.5°C) 5.25 (1.60) 5.75 (1.75) 6.00 (1.83) 6.25 (1.90) 7.00 (2.13) 7.33 (2.23) 7.80 (2.38) 8.80 (2.68)
80°F (26.6°C) 4.80 (1.46) 5.33 (1.62) 5.66 (1.72) 6.00 (1.83) 6.66 (2.03) 7.00 (2.13) 7.33 (2.23) 8.33 (2.54)
100°F (37.8°C) 4.50 (1.37) 5.00 (1.52) 5.25 (1.60) 5.50 (1.67) 6.33 (1.93) 6.50 (1.98) 6.80 (2.07) 7.80 (2.38)
110°F (43.3°C) 4.33 (1.32) 4.60 (1.40) 4.80 (1.46) 5.12 (1.56) 5.80 (1.77) 6.00 (1.83) 6.33 (1.93) 7.33 (2.23)
120°F (48.9°C) 3.80 (1.16) 4.33 (1.32) 4.50 (1.37) 4.75 (1.45) 5.33 (1.62) 5.50 (1.67) 5.80 (1.77) 6.50 (1.98)
130°F (54.4°C) 3.50 (1.06) 3.80 (1.16) 4.00 (1.22) 4.33 (1.32) 4.75 (1.45) 5.00 (1.52) 5.25 (1.60) 6.00 (1.83)
140°F (60.0°C) 3.00 (.91) 3.33 (1.01) 3.50 (1.06) 3.66 (1.11) 4.25 (1.29) 4.33 (1.32) 4.66 (1.42) 5.12 (1.56)
150°F (65.5°C) 2.50 (.76) 2.75 (.84) 3.00 (.91) 3.12 (.95) 3.33 (1.01) 3.50 (1.06) 3.75 (1.14) 4.25 (1.29)
Hanger spacing for PVC plastic Pipe assumes fluid loads up to 1.35 specific gravity [85 Lbs./Ft.3 (136.5 kg/m3)]
but not concentrated heavy loads.
Reference Data
S3 x 7.5 (S75 x 11.2) 21/2" (63) 0.260 (6.6) C3 x 5 (C75 x 7.4) 11/2" (37) 0.273 (6.9)
S4 x 7.7 (S100 x 11.5) 25/8" (68) 0.293 (7.4) C3 x 6 (C75 x 8.9) 15/8" (40) 0.273 (6.9)
9
S4 x 9.5 (S100 x 14.1) 23/4" (71) 0.293 (7.4) C4 x 5.4 (C100 x 8) 1 /16" (40) 0.296 (7.5)
S5 x 10 (S130 x 15) 3" (76) 0.326 (8.3) C4 x 7.25 (C100 x 10.8) 13/4" (44) 0.296 (7.5)
S5 x 14.75 (S130 x 22) 31/4" (83) 0.326 (8.3) C5 x 6.7 (C130 x 10) 13/4" (44) 0.320 (8.1)
7
S6 x 12.5 (S150 x 18.6) 33/8" (85) 0.359 (9.1) C5 x 9 (C130 x 13.4) 1 /8" (47) 0.320 (8.1)
S6 x 17.25 (S150 x 25.7) 311/16" (91) 0.359 (9.1) C6 x 8.2 (C150 x 12.2) 115/16" (48) 0.343 (8.7)
S7 x 15.3 (S180 x 22.8) 35/8" (93) 0.392 (10.0) C6 x 10.5 (C150 x 15.6) 2" (51) 0.343 (8.7)
1
S7 x 20 (S180 x 29.8) 37/8" (98) 0.392 (10.0) C6 x 13 (C150 x 19.3) 2 /8" (54) 0.343 (8.7)
S8 x 18.4 (S200 x 27.4) 4" (102) 0.425 (10.8) C7 x 9.8 (C180 x 14.6) 21/16" (53) 0.366 (9.3)
S8 x 23 (S200 x 34) 41/8" (106) 0.425 (10.8) C7 x 12.25 (C180 x 18.2) 23/16" (55) 0.366 (9.3)
S10 x 25.4 (S250 x 37.8) 45/8" (118) 0.491 (12.5) C7 x 14.75 (C180 x 22) 21/4" (57) 0.366 (9.3)
1
S10 x 35 (S250 x 52) 415/16" (126) 0.491 (12.5) C8 x 11.5 (C200 x 17.1) 2 /4" (57) 0.390 (9.9)
S12 x 31.8 (S310 x 47.3) 5" (127) 0.544 (13.8) C8 x 13.75 (C200 x 20.5) 23/8" (59) 0.390 (9.9)
S12 x 35 (S310 x 52) 51/16" (129) 0.544 (13.8) C8 x 18.75 (C200 x 27.9) 21/2" (63) 0.390 (9.9)
7
S12 x 40.8 (S310 x 60.7) 51/4" (133) 0.659 (16.7) C9 x 13.4 (C230 x 19.9) 2 /16" (61) 0.413 (10.5)
S12 x 50 (S310 x 74) 51/2" (139) 0.659 (16.7) C9 x 15 (C230 x 22) 21/2" (63) 0.413 (10.5)
S15 x 42.9 (S380 x 64) 51/2" (140) 0.622 (15.8) C9 x 20 (C230 x 30) 25/8" (67) 0.413 (10.5)
5
S15 x 50 (S380 x 74) 55/8" (143) 0.622 (15.8) C10 x 15.3 (C250 x 22.8) 2 /8" (67) 0.436 (11.1)
S18 x 54.7 (S460 x 81.4) 6" (152) 0.691 (17.6) C10 x 20 (C250 x 30) 23/4" (69) 0.436 (11.1)
S18 x 70 (S460 x 104) 61/4" (159) 0.691 (17.6) C10 x 25 (C250 x 37) 27/8" (73) 0.436 (11.1)
S20 x 66 (S510 x 98.2) 61/4" (159) 0.795 (20.2) C10 x 30 (C250 x 45) 3" (76) 0.436 (11.1)
15
S20 x 75 (S510 x 112) 63/8" (162) 0.795 (20.2) C12 x 20.7 (C310 x 30.8) 2 /16" (74) 0.501 (12.7)
S20 x 86 (S510 x 128) 71/16" (179) 0.920 (23.4) C12 x 25 (C310 x 37) 3" (76) 0.501 (12.7)
S20 x 96 (S510 x 143) 73/16" (183) 0.920 (23.4) C12 x 30 (C310 x 45) 31/8" (80) 0.501 (12.7)
3
S24 x 80 (S610 x 119) 7" (178) 0.870 (22.1) C15 x 33.9 (C380 x 50.4) 3 /8" (86) 0.650 (16.5)
S24 x 90 (S610 x 134) 71/8" (181) 0.870 (22.1) C15 x 40 (C380 x 60) 31/2" (89) 0.650 (16.5)
S24 x 100 (S610 x 149) 71/4" (184) 0.870 (22.1) C15 x 50 (C380 x 74) 33/4" (94) 0.650 (16.5)
S24 x 106 (S610 x 158) 77/8" (200) 1.090 (27.7) C18 x 42.7 (C460 x 63.5) 4" (102) 0.625 (15.8)
S24 x 121 (S610 x 180) 81/16" (204) 1.090 (27.7) C18 x 45.8 (C460 x 68.1) 4" (102) 0.625 (15.8)
Dimensions taken from ASTM A6-86. C18 x 51.9 (C460 x 77.2) 41/8" (106) 0.625 (15.8)
C18 x 58 (C460 x 86.3) 41/4" (112) 0.625 (15.8)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
W6 x 12 (W150 x 18.0) 4" (101) 0.280 (7.1) W12 x 26 (W310 x 38.7) 61/2" (165) 0.380 (9.7)
W6 x 16 (W150 x 24.0) 4" (101) 0.405 (10.3) W12 x 30 (W310 x 44.5) 61/2" (165) 0.440 (11.2)
W6 x 20 (W150 x 29.8) 6" (153) 0.365 (9.3) W12 x 35 (W310 x 52) 69/16" (167) 0.520 (13.2)
W6 x 25 (W150 x 37.1) 61/16" (154) 0.455 (11.6) W12 x 40 (W310 x 60) 8" (203) 0.515 (13.1)
W8 x 10 (W200 x 15.0) 315/16" (100) 0.205 (5.2) W12 x 45 (W310 x 67) 81/16" (205) 0.575 (14.6)
W8 x 13 (W200 x 19.3) 4" (101) 0.255 (6.5) W12 x 50 (W310 x 74) 81/16" (205) 0.640 (16.3)
W8 x 15 (W200 x 22.5) 4" (101) 0.315 (8.0) W12 x 53 (W310 x 79) 10" (254) 0.575 (14.6)
W8 x 18 (W200 x 26.6) 51/4" (133) 0.330 (8.4) W12 x 58 (W310 x 86) 10" (254) 0.640 (16.3)
W8 x 21 (W200 x 31.3) 51/4" (133) 0.400 (10.2) W12 x 65 (W310 x 97) 12" (306) 0.605 (15.4)
W8 x 24 (W200 x 35.9) 61/2" (165) 0.400 (10.2) W12 x 72 (W310 x 107) 12" (306) 0.670 (17.0)
W8 x 28 (W200 x 41.7) 61/2" (166) 0.465 (11.8) W12 x 79 (W310 x 117) 121/16" (307) 0.735 (18.7)
W8 x 31 (W200 x 46.1) 8" (203) 0.435 (11.0) W12 x 87 (W310 x 129) 121/8" (308) 0.810 (20.6)
W8 x 35 (W200 x 52) 8" (203) 0.495 (12.6) W12 x 96 (W310 x 143) 121/8" (308) 0.900 (22.9)
W8 x 40 (W200 x 59) 81/16" (205) 0.560 (14.2) W12 x 106 (W310 x 158) 121/4" (310) 0.990 (25.1)
W8 x 48 (W200 x 71) 81/8" (206) 0.685 (17.4) W12 x 120 (W310 x 179) 125/16" (313) 1.105 (28.1)
W8 x 58 (W200 x 86) 81/4" (209) 0.810 (20.6) W12 x 136 (W310 x 202) 123/8" (315) 1.250 (31.8)
W8 x 67 (W200 x 100) 81/4" (210) 0.935 (23.7) W12 x 152 (W310 x 226) 121/2" (317) 1.400 (35.6)
W10 x 12 (W250 x 17.9) 4" (101) 0.210 (5.3) W12 x 170 (W310 x 253) 129/16" (319) 1.560 (39.6)
W10 x 15 (W250 x 22.3) 4" (101) 0.270 (6.9) W12 x 190 (W310 x 283) 1211/16" (322) 1.735 (44.1)
W10 x 17 (W250 x 25.3) 4" (101) 0.330 (8.4) W12 x 210 (W310 x 313) 123/4" (325) 1.900 (48.3)
W10 x 19 (W250 x 28.4) 4" (101) 0.395 (10.0) W12 x 230 (W310 x 342) 127/8" (328) 2.070 (52.6)
W10 x 22 (W250 x 32.7) 53/4" (146) 0.360 (9.1) W12 x 252 (W310 x 375) 13" (330) 2.250 (57.2)
W10 x 26 (W250 x 38.5) 53/4" (147) 0.440 (11.2) W14 x 22 (W360 x 32.9) 5" (127) 0.335 (8.5)
W10 x 30 (W250 x 44.8) 513/16" (148) 0.510 (13.0) W14 x 26 (W360 x 39.0) 5" (127) 0.420 (10.7)
W10 x 33 (W250 x 49.1) 715/16" (202) 0.435 (11.0) W14 x 30 (W360 x 44.8) 63/4" (172) 0.385 (9.8)
W10 x 39 (W250 x 58) 8" (203) 0.530 (13.5) W14 x 34 (W360 x 51) 63/4" (172) 0.455 (11.6)
W10 x 45 (W250 x 67) 8" (203) 0.620 (15.7) W14 x 38 (W360 x 57) 63/4" (172) 0.515 (13.1)
W10 x 49 (W250 x 73) 10" (254) 0.560 (14.2) W14 x 43 (W360 x 64) 8" (203) 0.530 (13.5)
W10 x 54 (W250 x 80) 101/16" (255) 0.615 (15.6) W14 x 48 (W360 x 72) 8" (203) 0.595 (15.1)
W10 x 60 (W250 x 89) 101/16" (256) 0.680 (17.3) W14 x 53 (W360 x 79) 81/16" (205) 0.660 (16.8)
W10 x 68 (W250 x 101) 101/8" (257) 0.770 (19.6) W14 x 61 (W360 x 91) 10" (254) 0.645 (16.4)
W10 x 77 (W250 x 115) 103/16" (259) 0.870 (22.1) W14 x 68 (W360 x 101) 10" (254) 0.720 (18.3)
W10 x 88 (W250 x 131) 101/4" (261) 0.990 (25.1) W14 x 74 (W360 x 110) 101/16" (256) 0.785 (19.9)
W10 x 100 (W250 x 149) 103/8" (263) 1.120 (28.4) W14 x 82 (W360 x 122) 101/8" (257) 0.855 (21.7)
W10 x 112 (W250 x 167) 107/16" (265) 1.250 (31.8) W14 x 90 (W360 x 134) 141/2" (369) 0.710 (18.0)
Reference Data
W14 x 257 (W360 x 382) 16" (406) 1.890 (48.0) W24 x 68 (W610 x 101) 815/16" (227) 0.585 (14.9)
W14 x 283 (W360 x 421) 161/8" (409) 2.070 (52.6) W24 x 76 (W610 x 113) 9" (228) 0.680 (17.3)
W14 x 311 (W360 x 463) 161/4" (413) 2.260 (57.4) W24 x 84 (W610 x 125) 9" (228) 0.770 (19.6)
W14 x 342 (W360 x 509) 163/8" (416) 2.470 (62.7) W24 x 94 (W610 x 140) 91/16" (230) 1.875 (22.2)
W14 x 370 (W360 x 551) 161/2" (419) 2.660 (67.6) W24 x 104 (W610 x 155) 123/4" (324) 1.750 (19.0)
W14 x 398 (W360 x 592) 169/16" (421) 2.845 (72.3) W24 x 117 (W610 x 174) 123/4" (324) 0.850 (21.6)
W14 x 426 (W360 x 634) 1611/16" (424) 3.035 (77.1) W24 x 131 (W610 x 195) 127/8" (327) 0.960 (24.4)
W16 x 26 (W410 x 38.8) 51/2" (140) 0.345 (8.8) W24 x 146 (W610 x 217) 127/8" (327) 1.090 (27.7)
W16 x 31 (W410 x 46.1) 51/2" (140) 0.440 (11.2) W24 x 162 (W610 x 241) 1215/16" (328) 1.220 (31.0)
W16 x 36 (W410 x 53) 7" (178) 0.430 (10.9) W27 x 84 (W690 x 125) 915/16" (252) 0.640 (16.3)
W16 x 40 (W410 x 60) 7" (178) 0.505 (12.8) W27 x 94 (W690 x 140) 10" (254) 0.745 (18.9)
W16 x 45 (W410 x 67) 7" (178) 0.565 (14.4) W27 x 102 (W690 x 152) 10" (254) 0.830 (21.1)
W16 x 50 (W410 x 75) 71/16" (179) 0.630 (16.0) W27 x 114 (W690 x 170) 101/16" (255) 0.930 (23.6)
W16 x 57 (W410 x 85) 71/8" (181) 0.715 (18.2) W27 x 146 (W690 x 217) 1315/16" (354) 0.975 (24.8)
W16 x 67 (W410 x 100) 101/4" (260) 0.665 (16.9) W27 x 161 (W690 x 240) 14" (355) 1.080 (27.4)
W16 x 77 (W410 x 114) 105/16" (262) 0.760 (19.3) W27 x 178 (W690 x 265) 141/16" (357) 1.190 (30.2)
W16 x 89 (W410 x 132) 103/8" (263) 0.875 (22.2) W30 x 99 (W760 x 147) 107/16" (265) 0.670 (17.0)
W16 x 100 (W410 x 149) 107/16" (265) 0.985 (25.0) W30 x 108 (W760 x 161) 101/2" (267) 0.760 (19.3)
W18 x 35 (W460 x 52) 6" (152) 0.425 (10.8) W30 x 116 (W760 x 173) 101/2" (267) 0.850 (21.6)
W18 x 40 (W460 x 60) 6" (152) 0.525 (13.3) W30 x 124 (W760 x 185) 101/2" (267) 0.930 (23.6)
W18 x 46 (W460 x 68) 61/16" (154) 0.605 (15.4) W30 x 132 (W760 x 196) 109/16" (268) 1.000 (25.4)
W18 x 50 (W460 x 74) 71/2" (190) 0.570 (14.5) W30 x 173 (W760 x 257) 15" (381) 1.065 (27.1)
W18 x 55 (W460 x 82) 71/2" (190) 0.630 (16.0) W30 x 191 (W760 x 284) 15" (381) 1.185 (30.1)
W18 x 60 (W460 x 89) 79/16" (192) 0.695 (17.7) W30 x 211 (W760 x 314) 151/8" (384) 1.315 (33.4)
W18 x 65 (W460 x 97) 79/16" (192) 0.750 (19.0) W33 x 118 (W840 x 176) 111/2" (292) 0.740 (18.8)
W18 x 71 (W460 x 106) 75/8" (193) 0.810 (20.6) W33 x 130 (W840 x 193) 111/2" (292) 0.855 (21.7)
W18 x 76 (W460 x 113) 11" (279) 0.680 (17.3) W33 x 141 (W840 x 210) 111/2" (292) 0.960 (24.4)
W18 x 86 (W460 x 128) 111/16" (281) 0.770 (19.6) W33 x 152 (W840 x 226) 119/16" (294) 1.055 (26.8)
W18 x 97 (W460 x 144) 111/8" (282) 0.870 (22.1) W33 x 201 (W840 x 299) 153/4" (400) 1.150 (29.2)
W18 x 106 (W460 x 158) 113/16" (284) 0.940 (23.9) W36 x 135 (W920 x 201) 1115/16" (303) 0.790 (20.1)
W18 x 119 (W460 x 177) 111/4" (286) 1.060 (26.9) W36 x 150 (W920 x 223) 12" (305) 0.940 (23.9)
W21 x 44 (W530 x 66) 61/2" (165) 0.450 (11.4) W36 x 160 (W920 x 238) 12" (305) 1.020 (25.9)
W21 x 50 (W530 x 74) 61/2" (165) 0.535 (13.6) W36 x 170 (W920 x 253) 12" (305) 1.100 (27.9)
W21 x 57 (W530 x 85) 69/16" (167) 0.650 (16.5) W36 x 182 (W920 x 271) 121/16" (306) 1.180 (30.0)
W21 x 62 (W530 x 92) 81/4" (209) 0.615 (15.6) W36 x 194 (W920 x 289) 121/8" (308) 1.260 (32.0)
W21 x 68 (W530 x 101) 81/4" (209) 0.685 (17.4) W36 x 210 (W920 x 313) 123/16" (309) 1.360 (34.5)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
11/2" x 11/2" x 3/16" 11/2" x 11/2" x 3/16" 11/2" x 11/2" x 3/16" 2" x 11/2" x 3/16"
18" (457.2)
B26SH B26SH B26SH B22SH
11/2" x 11/2" x 3/16" 2" x 11/2" x 3/16" 2" x 11/2" x 3/16" 2" x 11/2" x 3/16"
24" (609.6)
B26SH B22SH B22SH B22SH
2" x 11/2" x 3/16" 2" x 11/2" x 3/16" 2" x 11/2" x 3/16" 2" x 11/2" x 3/16"
30" (762.0)
B22SH B22SH B22SH B22SH
2" x 11/2" x 3/16" 2" x 11/2" x 3/16" 21/2" x 11/2" x 3/16" 21/2" x 11/2" x 3/16"
36" (914.4)
B22SH B22SH B12SH B12SH
Reference Data
21/2" x 11/2" x 3/16" 21/2" x 11/2" x 3/16" 21/2" x 11/2" x 3/16" 3" x 2" x 3/16"
48" (1219.2)
B12SH B12SH B12SH B11SH
21/2" x 11/2" x 3/16" 21/2" x 11/2" x 3/16" 3" x 2" x 3/16" 3" x 2" x 3/16"
60" (1524.0)
B12SH B12SH B11SH B11SH
21/2" x 11/2" x 3/16" 3" x 2" x 3/16" 3" x 2" x 3/16" 3" x 2" x 1/4"
72" (1828.8)
B12SH B11SH B11SH B11SH
3" x 2" x 3/16" 3" x 2" x 3/16" 3" x 2" x 1/4" 3" x 2" x 1/4"
84" (2133.6)
B11SH B11SH B11SH B11SH
3" x 2" x 3/16" 3" x 2" x 1/4" 3" x 2" x 1/4" 31/2" x 21/2" x 5/16"
96" (2438.4)
B11SH B11SH B11SH B12SHA
3" x 2" x 3/16" 3" x 2" x 1/4" 31/2" x 21/2" x 5/16" 31/2" x 21/2" x 5/16"
108" (2743.2)
B11SH B11SH B12SHA B12SHA
3" x 2" x 1/4" 3" x 2" x 1/4" 31/2" x 21/2" x 5/16" 31/2" x 21/2" x 5/16"
120" (3048.0)
B11SH B11SH B12SHA B12SHA
Based on NFPA 13-1999, Table 6-1.1.3 (a) & Table 6-1.1.3 (b).
2" x 11/2" x 3/16" 21/2" x 11/2" x 3/16" 3" x 2" x 3/16" 3" x 2" x 1/4"
18" (457.2)
B22SH B12SH B11SH B11SH
21/2" x 11/2" x 3/16" 21/2" x 11/2" x 3/16" 3" x 2" x 3/16" 3" x 2" x 1/4"
24" (609.6)
B12SH B12SH B11SH B11SH
21/2" x 11/2" x 3/16" 3" x 2" x 3/16" 3" x 2" x 1/4" 3" x 2" x 1/4"
30" (762.0)
B12SH B11SH B11SH B11SH
3" x 2" x 3/16" 3" x 2" x 3/16" 31/2" x 21/2" x 1/4" 31/2" x 21/2" x 5/16"
36" (914.4)
Reference Data
B11SH B11SH B12SHA B12SHA
3" x 2" x 3/16" 3" x 2" x 1/4" 31/2" x 21/2" x 5/16" 4" x 3" x 5/16"
48" (1219.2)
B11SH B11SH B12SHA B12SHA
3" x 2" x 1/4" 31/2" x 21/2" x 5/16" 4" x 3" x 5/16" 5" x 31/2" x 5/16"
60" (1524.0)
B11SH B12SHA B12SHA B11SHA
31/2" x 21/2" x 5/16" 4" x 3" x 5/16" 4" x 3" x 5/16" 5" x 31/2" x 5/16"
72" (1828.8)
B12SHA B12SHA B12SHA B11SHA
31/2" x 21/2" x 5/16" 4" x 3" x 5/16" 5" x 31/2" x 5/16" 6" x 4" x 1/4"
84" (2133.6)
B12SHA B12SHA B11SHA B12SHA4
31/2" x 21/2" x 5/16" 4" x 3" x 5/16" 5" x 31/2" x 5/16" 6" x 4" x 1/4"
96" (2438.4)
B12SHA B12SHA B11SHA B12SHA4
31/2" x 21/2" x 5/16" 4" x 3" x 5/16" 5" x 31/2" x 5/16" 6" x 4" x 3/8"
108" (2743.2)
B12SHA B12SHA B11SHA B11SHA4
4" x 3" x 5/16" 5" x 31/2" x 5/16" 6" x 4" x 1/4" 6" x 4" x 3/8"
120" (3048.0)
B12SHA B11SHA B12SHA4 B11SHA4
Based on NFPA 13-1999, Table 6-1.1.3 (a) & Table 6-1.1.3 (b).
Reference Data
Type 1 B3100 Type 1 Type 26 B2400 Type 26
Type 1 B3100C Type 1 Type 26 B3180 Type 26
Type 1 B3100F Type 1 Type 26 B3180FL Type 26
Type 1 B3102 Type 1 B3291, B3292
Type 1 B3104 Type 1 Type 28 B3294, B3296 Type 28
B3298
Type 1 B3108 Type 1
B3293, B3295
Type 3 B3144 Type 3 Type 29 Type 29
B3297
Type 3 B3146 Type 3
Type 30 B3054 Type 30
Type 4 B3140 Type 4
Type 32 B3065 Type 31
Type 4 B3141 Type 4
Type 32 B3068 Type 31
Type 4 B3142 Type 4
Type 33 B3066 Type 32
Type 6 B3171 Type 6
Type 34 B3067 Type 33
Type 8 B3373 Type 8
Type 35 B3058 Type 34
Type 8 B3373C Type 8
Type 35 B3060 Type 34
Type 8 B3373CT Type 8
Type 35 B3060L Type 34
Type 8 B3373CTC Type 8
Type 35 B3062 Type 34
Type 10 200 Type 10
Type 35 B3070 Type 34
Type 10 200C Type 10
Type 35 B3891-B3897 Type 35
Type 10 200F Type 10
Type 35 B3991 & B3993 Type 35
Type 10 200H Type 10
Type 37 B3095 Type 36
Type 10 2 & 2F Type 10
Type 38 B3090 Type 37
Type 10 B3170CT Type 10
Type 38 B3092 Type 37
Type 10 B3170CTC Type 10
Type 38 B3094 Type 37
Type 12 B3104 Type 1*
Type 38 B3097 Type 37
Type 12 B3104C Type 1*
Type 39 B3093 Type 38
Type 12 B3104CT Type 1
Type 39 B3096 Type 38
Type 13 B3202 Type 13
Type 40A & 40B B3160-3165 Type 39A & 39B
Type 14 B3201 Type 14
Type 41 B3151 Type 40
Type 15 B3224 Type 15
Type 42 B3114 Type 41
Type 15 B3224CT Type 15
Type 42 B3122 Type 41
Type 16 B3222 Type 16
Type 42 B3122A Type 41
Type 17 B3200 Type 17
Type 44 B3110 Type 43
Type 18 B3014 Type 18
Type 45 B3117SL Type 44
Type 19 B303-B309 Type 19
Type 45 B3120 Type 44
Type 19 B321 Type 19
Type 46 B3119SL Type 45
Type 19 B2500 Type 18
Type 47 B3118SL Type 46
Type 19 B3031 Type 19
Type 49 B3262 Type 48
Type 19 & 23 B3033 Type 19 & 23
Type 50 B3264 Type 49
Type 19 & 23 B3034 Type 19 & 23
Type 53 B3045 Type 25
Type 21 B3050 Type 21
Type 54 B3040 Type 27
Type 21 B3055 Type 21
Type 22 B3083 Type 22
* For all finishes excluding plain.
Note: Refer to the catalog page for specific sizes that are UL Listed and/or FM Approved.
Reference Data
B3104F Type 1* Type 12 -- -- B3293, B3295 --
Type 29 Type 29 --
B3106 Type 1 -- -- -- B3297
B3108 Type 1 Type 1 -- -- B3373 Type 8 Type 8 Yes Yes
B3109 Type 1 -- -- -- B3373C Type 8 Type 8 -- --
B3110 Type 43 Type 44 -- -- B3373CT Type 8 Type 8 -- --
B3114 Type 41 Type 42 -- -- B3373CTC Type 8 Type 8 -- --
B3117SL Type 44 Type 45 -- -- B3373F Type 8 Type 8 -- --
B3118SL Type 46 Type 47 -- -- B3690 Type 5 Type 5 -- --
B3119SL Type 45 Type 46 -- -- B3690C Type 5 Type 5 -- --
B3120 Type 44 Type 45 -- -- B3690F Type 5 Type 5 -- --
B3122 Type 41 Type 42 -- -- B3891-B3897 Type 35 Type 35 -- --
B3122A Type 41 Type 42 -- -- B3991 Type 35 Type 35 -- --
B3140 Type 4 Type 4 Yes Yes B3993 Type 35 Type 35 -- --
B3141 Type 4 Type 4 -- -- B3993A Type 35 Type 35 -- --
B3142 Type 4 Type 4 -- --
B3144 Type 3 Type 3 -- --
B3146 Type 3 Type 3 -- --
B3151 Type 40 Type 41 -- --
B3160-B3165 Type 39A & 39B Type 40A & 40B -- --
B3170CT Type 10 Type 10 -- --
B3170CTC Type 10 Type 10 -- --
B3180 Type 26 Type 26 -- --
B3180FL Type 26 Type 26 -- --
B3184 -- -- Yes --
B3188 Type 24 Type 24 Yes --
B3188C Type 24 Type 24 -- --
B3198H Type 12 Type 25 -- --
B3198HCT Type 12 Type 25 -- --
B3198R Type 12 Type 25 -- --
B3198RCT Type 12 Type 25 -- --
B3200 Type 17 Type 17 -- --
B3201 Type 14 Type 14 -- --
Note: Refer to the catalog page for specific sizes that are UL Listed and/or FM Approved.
Reference Data
B3106V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1VT B3170NFF (Disc.) . . . . . . . . . . . . . . . . . . . 200F B3291 - B3298 . . . . . . . . . . . . . . . . . . . . . . . N/A
B3108 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1A B3171 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3362 - B3365 . . . . . . . . . . . . . . . . . . . . . . . N/A
B3109 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3175 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3367 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . 69
B3110 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324 B3175CT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3373 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
B3114 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322 B3180 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 B3373C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6PVC
B3114R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3180FL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20S B3373CT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
B3117R . . . . . . . . . . . . . . . . . . . . . . . .N/A B3181 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . 22 B3373CTC . . . . . . . . . . . . . . . . . . . . . . . . . 82PVC
B3117SL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 327 B3182 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . 23 B3373F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6F
B3118SL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328 B3183 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . 24 B3380 - B3387 . . . . . . . . . . . . . . . . . . . . . . . N/A
B3119SL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3184 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3690 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
B3120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325 B3188 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 B3690C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3PVC
B3122 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326 B3188C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3690F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3F
B3122A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3190 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 B3891 . . . . . . . . . . . . . . . . . . . . . . . . 425 (Disc.)
B3124 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3191 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 B3891 . . . . . . . . . . . . . . . . . . . . . . . . 426 (Disc.)
B3126 . . . . . . . . . . . . . . . . . . . . . . . . . . . ROL-16 B3195 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 B3891 . . . . . . . . . . . . . . . . . . . . . . . . 429 (Disc.)
B3132 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 B3195CT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 B3892 . . . . . . . . . . . . . . . . . . . . . . . . 430 (Disc.)
B3132W-1 &11/2 . . . . . . . . . . . . . . . . . . . . . 9X B3198H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302 B3894 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
B3134 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 B3198HCT . . . . . . . . . . . . . . . . . . . . . . . . 301CT B3895 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
B3134W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14X B3199R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 B3993-10 . . . . . . . . . . . . . . . . . . . . . 428 (Disc.)
B3140 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 B3199RCT . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3393-10/B3393-10B . . . . . . . . . 431 (Disc.)
B3140C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4PVC B3200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330 DS15x2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
B3140F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4F B3201 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332 DURA-BLOK™ . . . . . . . . . . . Pipe Pier (Disc.)
B3141 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4CI B3202 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331 FFW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
B3142 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4H B3203 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333 FW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
B3144 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 B3205 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 HHN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
B3146 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5H B3210 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 HN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
B3147A-1/2 thru 4 . . . . . . . . . 32-1/2 thru 4 B3210X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102L ISO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
B3147B 4 thru 24 . . . . . . . . . . . 32-5 thru 34 B3211 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 KwikClips™ . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
B3148 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 B3211X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101L LW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
B3149 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 B3212 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 N2500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310N
B3151 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 B3213 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Snap ‘N Shields™ Clevis Hangers . . . . N/A
B3153 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 B3214 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Snap ‘N Shields™ . . . . . . . . . . . . . . . . . . . . N/A
B3154 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 B3220 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Toggle Bolts . . . . . . . . . . . . . . . . . . . . . . . . . 123
B3155 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 B3222 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 307
B3160 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260 B3223 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
14 ....................... B3040 (Fig. 336) 165 . . . . . . . . . . . . . . . . . . . . . B3165 (Fig. 265) 438-1 . . . . . . . . . . . . . . . . . . . . Consult Factory
40 . . . . . . . . . . . . . . . . . . . . . . . . Consult Factory 167 . . . . . . . . . . . . . . . . . . . . . B3151 (Fig. 220) 438-2 . . . . . . . . . . . . . . . . . . . . Consult Factory
47 . . . . . . . . . . . . . . . . . . . . . . . . B3084 (Fig. 33) 168 . . . . . . . . . . . . . . . . . . . . . B3153 (Fig. 219) 438-3 . . . . . . . . . . . . . . . . . . . . Consult Factory
49 . . . . . . . . . . . . . . . . . . . . . . . . B3086 (Fig. 34) 171 . . . . . . . . . . . . . . . . . . . . . B3114 (Fig. 322) 590 . . . . . . . . . . . . . . . . . . . . . . B3102 (Fig. 1CI)
51 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B422 175 . . . . . . . . . . . . . . . . . . . . . B3120 (Fig. 325) 594 . . . . . . . . . . . . . . . . . . . B3134W (Fig. 14X)
52 . . . . . . . . . . . . . . . . . . . . . . . . B3085 (Fig. 35) 177 . . . . . . . . . . . . . . . . . . . . . B3122 (Fig. 326) 595 . . . . . . . . . . . . . . . . . . . . . . . B3134 (Fig. 14)
54 . . . . . . . . . . . . . . . . . . . . . . . . Consult Factory 178 . . . . . . . . . . . . . . . . . . . . . B3264 (Fig. 500) 599 . . . . . . . . . . B3132W-1 & 11/2 (Fig. 9X)
55 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3080 L & S 181 . . . . . . . . . . . . . . . . . . . . . B3110 (Fig. 324) 600 . . . . . . . . . . . . . . . . . . . . . . . . B3132 (Fig. 9)
(Fig. 343 LONG & 191 . . . . . . . . . . . . . . . . . . . . . B3098 (Fig. 313) 218, 229 . . . . . . . . . . . . . . . B3054 (Fig. 329)
FG 343 SHORT)
192 . . . . . . . . . . . . . . . . . . . . . B3096 (Fig. 312)
60 . . . . . . . . . . . . . . . . . . . . . . . B3248 (Fig. 118)
194 . . . . . . . . . . . . . . . . . . . . . . . B3068 (Fig. 30)
62 . . . . . . . . . . . . . . . . . . . . . . . . Consult Factory
195 . . . . . . . . . . . . . . . . . . . . . B3066 (Fig. 30M)
63 . . . . . . . . . . . . . . . . . . . . . . . . Consult Factory
Reference Data
199 . . . . . . . . . . . . . . . . . . . . . B3067 (Fig. 30H)
CT65 . . . . . . . . . . . . . . . . . . B3104CT (Fig. 81)
202 . . . . . . . . . . . . . . . . . . . . . . . B3060 (Fig. 50)
66 . . . . . . . . . . . . . . . . . . . . . . . B3083 (Fig.305)/
206 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 51
B3083WO (Fig. 304)
212 . . . . . . . . . . . . . . . . . . . . . . . . B3140 (Fig. 4)
67 . . . . . . . . . . . . . . . . . . . . . . . . . . B3690 (Fig. 3)
212FP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 4A
68 . . . . . . . . . . . . . . . . . . . . . . . . Consult Factory
216 . . . . . . . . . . . . . . . . . . . . . . . B3142 (Fig. 4H)
69 . . . . . . . . . . . . . . . . . . . . Fig. 200 (B3170NF)
217 . . . . . . . . . . . . . . . . . . . . . B3045 (Fig. 335)
69C . . . . . . . . . . . . . . . Fig. 200C (B3170NFC)
227 . . . . . . . . . . . . . . . . . . . . . . . B3042 (Fig. 61)
89, 87 . . . . . . . . . . . . . . . . . . . . B3367 (Fig. 69)
230 . . . . . . . . . . . . . . . . . . . . . B3202 (Fig. 331)
92 . . . . . . . . . . . . . . . . . . . . . . Fig. 65/Fig. 65XT
247 . . . . . . . . . . . . . . . . . . . . . B3262 (Fig. 506)
93 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 66
248 . . . . . . . . . . . . . . . . . . . . . B3210 (Fig. 102)
95 . . . . . . . . . . . . . . . . . . . . . . . . B351L (Fig. 64)
248X . . . . . . . . . . . . . . . . . B3210X (Fig. 102L)
100 . . . . . . . . . . . . . . . . . . . . . . . . B3149 (Fig. 8)
255 . . . . . . . . . . . B3281 - B3287 (Fig. 422)
103 . . . . . . . . . . . . . . . . . . . . . . . . B3148 (Fig. 7)
256 . . . . . . . . . . . B3281 - B3287 (Fig. 421)
110R . . . . . . . . . . . . . . . . . . . . B3222 (Fig. 307)
257 . . . . . . . . . . . . . . . . . . . . . B3891 (Fig. 426)
112 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 910
259 . . . . . . . . . . . . . . . . . . . . . B3090 (Fig. 318)
114 . . . . . . . . . . . . . . . . . . . . . B3224 (Fig. 306)
260 . . . . . . . . . . . . . . . . . . . . . . . . B3100 (Fig. 1)
CT121 . . . . . . . . . . . . . . . . . B3373CT (Fig. 82)
261 . . . . . . . . . . . . . . . . . . . . . . . . B3373 (Fig. 6)
CT138R . . . . . . . . . B3198HCT (Fig. 301CT)
262 . . . . . . . . . . . . . . . . . . . . . . . B3180 (Fig. 20)
128R . . . . . . . . . . . . . . . . . . . . . B3199 (Fig. 78)
264 . . . . . . . . . . . . . . . . . . . . B3093 (Fig. 317A)
133-134 . . . . . . . . . . . . . . . . . B3050 (Fig. 62)
271 . . . . . . . . . . . . . . . . . . B3117SL (Fig. 327)
135 . . . . . . . . . . . . . . . . . . . . . . B655 (Fig. 70) &
B3220 (Fig. 71) 274 . . . . . . . . . . . . . . . . . . B3118SL (Fig. 328)
136R . . . . . . . . . . . . . . . . . . . . . B656 (Fig. 70R) 278 . . . . . . . . . . . . . . . . . . . . . B3211 (Fig. 101)
137 . . . . . . . . . . . . . . . . . . . . . B3188 (Fig. 110) 278X . . . . . . . . . . . . . . . . . B3211X (Fig. 101L)
138R . . . . . . . . . . . . . . . . . . B3198H (Fig. 302) 280 . . . . . . . . . . . . . . . . . . . . . B3891 (Fig. 426)
140 . . . . . . . . . . . . . . . . . . . . . B3205 (Fig. 103) 282 . . . . . . . . . . . . . . . . . . . . B3014 (FG 309) &
B3014N (Fig. 309N)
142 . . . . . . . . . . . . . . . . . . . . . B3213 (Fig. 105)
285N . . . . . . . . . . . . . . . . . . N2500 (Fig. 310N)
146 . . . . . . . . . . . . . ATR (Fig. 99 & Fig. 100)
290 . . . . . . . . . . . . . . . . . . . . . B3200 (Fig. 330)
157 . . . . . . . . . . . . . . . . . . . . . B3203 (Fig. 333)
295 . . . . . . . . . . . . . . . . . . . . . . . . B3144 (Fig. 5)
160 . . . . . . . . . . . . . . . . . . . . . B3160 (Fig. 260)
299 . . . . . . . . . . . . . . . . . . . . . B3201 (Fig. 332)
161 . . . . . . . . . . . . . . . . . . . . . B3161 (Fig. 261)
300 . . . . . . . . . . . . . . . . . . . . . . . . B3108(Fig. 1A)
162 . . . . . . . . . . . . . . . . . . . . . B3162 (Fig. 262)
436 . . . . . . . . . . . . . . . . . . . . . . . Consult Factory
163 . . . . . . . . . . . . . . . . . . . . . B3163 (Fig. 263)
437 . . . . . . . . . . . . . . . . . . . . . . . Consult Factory
164 . . . . . . . . . . . . . . . . . . . . . B3164 (Fig. 264)
10 . . . . . . . . . . . . . . . . . . . . ATR (Fig. 99 & 100) 490 . . . . . . . . . . . . . . . . . . . . . B3114 (Fig. 322) 885 . . . . . . . . . . . . . . . . . . . . . Fig 109A (B3019)
15 . . . . . . . . . . . . . . . . . . . . . . . B3205 (Fig. 103) 508 . . . . . . . . . . . . . . . . . . . . B3198H (Fig. 302) 890 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 975
20 . . . . . . . . . . . . . . . . . . . . ATR (Fig. 99 & 100) 512H . . . . . . . . . . . . B3198HCT (Fig. 301CT) 900 . . . . . . . . . . . . . . . . . . . . . B3083 (Fig. 305)
25 . . . . . . . . . . . . . . . . . . . . . . . B3203 (Fig. 333) 520 . . . . . . . . . . . . . . . . . . . . . . . . B3140 (Fig. 4) 900-1 . . . . . . . . . . . . . . . B3083WO (Fig. 304)
32 . . . . . . . . . . . . . . . . . . . . . . . B3222 (Fig. 307) 522 . . . . . . . . . . . . . . . . . . . . . . . B3142 (Fig. 4H) 903 . . . . . . . . . . . . . . . . . . . . . . . B3085 (Fig. 35)
35 . . . . . . . . . . . . . . . . . . . . . . . B3200 (Fig. 330) 525 . . . . . . . . . . . . . . . . . . . . . . . . B3144 (Fig. 5) 904 . . . . . . . . . . . . . . . . . . . . . . . B3086 (Fig. 34)
38 . . . . . . . . . . . . . . . . . . . . . . . B3201 (Fig. 332) 535 . . . . . . . . . . . . . . . . . . . . . . . . B3148 (Fig. 7) 910 . . . . . . . . . . . . . . . . . . . . . . . B3061 (Fig. 42)
40 . . . . . . . . . . . . . . . . . . . . . . . B3213 (Fig. 105) 545 . . . . . . . . . . . . . . . . . . . . . . . . B3149 (Fig. 8) 925 . . . . . . . . . . . . . . . . . . . . . . . B3070 (Fig. 52)
44 . . . . . . . . . . . . . . . . . . . . . . . B3224 (Fig. 306) 550 . . . . . . . . . . . . . . . . . . . . . . . . B3373 (Fig. 6) 930 . . . . . . . . . . . . . . . . . . . . . B3248 (Fig. 118)
47W . . . . . . . . . . . . . . . . . . . . . . . AWA (Fig. 209) 552 . . . . . . . . . . . . . . . . . . . . B3373CT (Fig. 82) 936 . . . . . . . . . . . . . . . . . . . . . . . . . . B3080 L & S
48 . . . . . . . . . . . . . . . . . . . . . DS15x2 (Fig. 125) 553 . . . . . . . . . . . . . . . . . . B3373C (Fig. 6PVC) (Fig. 343 LONG &
Fig. 343 SHORT)
50 . . . . . . . . . . . . . . . . . . . . . . . B3210 (Fig. 102) 554 . . . . . . . . . . . . . . B3373CTC (Fig. 82PVC)
940 . . . . . . . . . . . . . . . . . . . . . . . B3199 (Fig. 78)
Reference Data
55 . . . . . . . . . . . . . . . . . . . . . . . B3211 (Fig. 101) 580 . . . . . . . . . . . . . . . . . . . . . . . . B3132 (Fig. 9)
950 . . . . . . . . . . . . . . . . . . . . . B3014 (Fig. 309)
60 . . . . . . . . . . . . . . . . . . . . . . . B3212 (Fig. 104) 585 . . . . . . . . . . B3132W-1 &11/2 (Fig. 9X)
950N . . . . . . . . . . . . . . . . B3014N (Fig. 309N)
70 . . . . . . . . . . . . . . . . . . . . . B2499 (Fig. 107F) 590 . . . . . . . . . . . . . . . . . . . . . . . B3134 (Fig. 14)
960 . . . . . . . . . . . . . . . . . . . . . B3202 (Fig. 331)
80 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 120 595 . . . . . . . . . . . . . . . . . . . B3134W (Fig. 14X)
970 . . . . . . . . . . . . . . . . . . . . . . . . B3690 (Fig. 3)
90 . . . . . . . . . . . . . . . . . . . . . . . B3188 (Fig. 110) 610, 620 . . . . . . . . . . . . . . . . . B3050 (Fig. 62)
970F . . . . . . . . . . . . . . . . . . . . B3690F (Fig. 3F)
95, 110 . . . . . . . . . . . . . . . . . . B501 (Fig. 111) 630 . . . . . . . . . . . . . . . . . . . . . B3054 (Fig. 329)
980 . . . . . . . . . . . . . . . . . . . . . . . B3195 (Fig. 84)
100 . . . . . . . . . . . . . . . . . . . . . . . . B655 (Fig. 70) 635 . . . . . . . . . . . . . . . . . . . . . B3040 (Fig. 336)
982 . . . . . . . . . . . . . . . . . . . . B3195CT (Fig. 83)
104 . . . . . . . . . . . . . . . . . . . . . B655S (Fig. 70S) 651 . . . . . . . . . . . . . . . . . . . . . B3160 (Fig. 260)
105 . . . . . . . . . . . . . . . . . . . . . . . B656 (Fig. 70R) 653 . . . . . . . . . . . . . . . . . . . . . B3161 (Fig. 261)
110 . . . . . . . . . . . . . . . . . . . . . . . . . HN (Fig. 113) 654 . . . . . . . . . . . . . . . . . . . . . B3162 (Fig. 262)
110H . . . . . . . . . . . . . . . . . . . . . . HHN (Fig. 114) 655 . . . . . . . . . . . . . . . . . . . . . B3163 (Fig. 263)
130 . . . . . . . . . . . . . . . . . . . . . . . . . FW (Fig. 115) 656 . . . . . . . . . . . . . . . . . . . . . B3164 (Fig. 264)
134 . . . . . . . . . . . . . . . . . . . . . . . . . LW (Fig. 117) 658 . . . . . . . . . . . . . . . . . . . . . B3165 (Fig. 265)
135 . . . . . . . . . . . . . . . . . . . . . B3234 (Fig. 116) 670-678 . . . . . . B3281 - B3287 (Fig. 421)
136 . . . . . . . . . . . . . . . . . . . . . . . . FFW (Fig. 119) 690 . . . . . . . . . . . . . . . . . . . . . B3891 (Fig. 426)
151 . . . . . . . . . . . . . . . . . . . . . . . . B3170 (Fig. 2) 690-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3891
160 . . . . . . . . . . . . . . . . . . . . . B3153 (Fig. 219) 690-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3892
170 . . . . . . . . . . . . . . . . . . . . . B3151 (Fig. 220) 690-3 . . . . . . . . . . . . . B3393-10/B3393-10B
250 . . . . . . . . . . . . . . . . . . . . . . . B351L (Fig. 64) 810 . . . . . . . . . . . . . . . . . . . . . . . B3191 (Fig. 41)
350 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 65 820 . . . . . . . . . . . . . . . . . . . . . . . B3190 (Fig. 40)
359 . . . . . . . . . . . . . . . . . . . . . . . B3367 (Fig. 69) 825 . . . . . . . . . . . . . . . . . . . . . . . B3180 (Fig. 20)
360 . . . . . . . . . . . . . . . . . . . . . . . B3367 (Fig. 69) 830 . . . . . . . . . . . . . . . . . . . B3180FL (Fig. 20S)
420 . . . . . . . . . . . . . . . . . . . . . . B3102 (Fig. 1CI) 840 . . . . . . . . . . . . . . . . . . . . B3147A-1/2 thru 4
430 . . . . . . . . . . . . . . . . . . . . . . . B3108 (Fig. 1A) (Fig. 32-1/2 thru 4)
440 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3104 840 . . . . . . . . . . . . . . . . . . . . B3147B 4 thru 24
(Fig. 32-5 thru 34)
450 . . . . . . . . . . . . . . . . . . . . . . . . B3100 (Fig. 1)
850 . . . . . . . . . . . . . . . . . . . . . B3065 (Fig. 30L)
450F . . . . . . . . . . . . . . . . . . . . B3100F (Fig. 1F)
855 . . . . . . . . . . . . . . . . . . . . . B3066 (Fig. 30M)
450V . . . . . . . . . . . . . . . . . . . . . B3106 (Fig. 1V)
860 . . . . . . . . . . . . . . . . . . . . . B3067 (Fig. 30H)
453 . . . . . . . . . . . . . . . . . . B3100C (Fig. 1PVC)
871 . . . . . . . . . . . . . . . . . . . B3088T (Fig. 316T)
460 . . . . . . . . . . . . . . . . . . . . . B3120 (Fig. 325)
875 . . . . . . . . . . . . . . . . . . . . B3093 (Fig. 317A)
470 . . . . . . . . . . . . . . . . . . . . . B3110 (Fig. 324)
876 . . . . . . . . . . . . . . . . . . . . B3092 (Fig. 318A)
480 . . . . . . . . . . . . . . . . . . . . . B3122 (Fig. 326)
880 . . . . . . . . . . . . . . . . . . . . . B3095 (Fig. 317)
486 . . . . . . . . . . . . . . . . . . B3117SL (Fig. 327)
882 . . . . . . . . . . . . . . . . . . . . . B3090 (Fig. 318)
487 . . . . . . . . . . . . . . . . . . B3118SL (Fig. 328)
Reference Data
59 . . . . . . . . . . . . . . . . Toggle Bolts (Fig. 123) 352 . . . . . . . . . . . . . . . . . . . . . B3160 (Fig. 260)
69 . . . . . . . . . . . . . . . . . . . . . . . . B3068 (Fig. 30) 353 . . . . . . . . . . . . . . . . . . . . . B3162 (Fig. 262)
84 . . . . . . . . . . . . . . . . . . . . . . B3066 (Fig. 30M) 354 . . . . . . . . . . . . . . . . . . . . . B3163 (Fig. 263)
85 . . . . . . . . . . . . . . . . . . . . . . . . B3199 (Fig. 78) 355 . . . . . . . . . . . . . . . . . . . . . B3164 (Fig. 264)
92 . . . . . . . . . . . . . . . . . . . . . . . B3045 (Fig. 335) 356 . . . . . . . . . . . . . . . . . . . . . B3165 (Fig. 265)
93 . . . . . . . . . . . . . . . . . . . . . . . B3211 (Fig. 101) 478 . . . . . . . . . . . . . . . . . . . . . B3264 (Fig. 500)
94 . . . . . . . . . . . . . . . . . . . . ATR (Fig. 99 & 100) 706 . . . . . . . . . . . . . . . . . . . . . B3234 (Fig. 116)
100 . . . . . . . . . . . . . . . . . . . . . . . . B3100 (Fig. 1) 800 . . . . . . . . . . . . . . . . . . . . . . . . B3170 (Fig. 2)
102 . . . . . . . . . . . . . . . . . . . . . B3248 (Fig. 118) 800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 200
103 . . . . . . . . . . . . . . . . . . . . . . . . . FW (Fig. 115) 100C.I. . . . . . . . . . . . . . . . . . . B3102 (Fig. 1CI)
109 . . . . . . . . . . . . . . . . . . . . . B3122 (Fig. 326) 100CT . . . . . . . . . . . . . . . . . B3104CT (Fig. 81)
114 . . . . . . . . . . . . . . . . . . . . . . . B3180 (Fig. 20) 100EL . . . . . . . . . . . . . . . . . . . . B3108 (Fig. 1A)
123 . . . . . . . . . . . . . . . . . . . . . . . . B655 (Fig. 70) 100PVC . . . . . . . . . . . . . . B3100C (Fig. 1PVC)
125 . . . . . . . . . . . . . . . . . . . . . B3090 (Fig. 318) 100PVC . . . . . . . . . B3104CTC (Fig. 81PVC)
126 . . . . . . . . . . . . . . . . . . . . . . . . B3373 (Fig. 6) 123R . . . . . . . . . . . . . . . . . . . . . B656 (Fig. 70R)
132 . . . . . . . . . . . . . . . . . . . . . B3202 (Fig. 331) 123W . . . . . . . . . . . . . . . . . . . . . B3220 (Fig. 71)
133 . . . . . . . . . . . . . . . . . . . . . B3205 (Fig. 103) 126CT . . . . . . . . . . . . . . . . . B3373CT (Fig. 82)
137 . . . . . . . . . . . . . . . . . . . . . B3096 (Fig. 312) 126PVC . . . . . . . . . . . . . . B3373C (Fig. 6PVC)
139 . . . . . . . . . . . . . . . . . . . . . B3067 (Fig. 30H) 158DB . . . . . . . . . . . . . . . . . . . . B3134 (Fig. 14)
140 . . . . . . . . . . . . . . . . . . . . . B3110 (Fig. 324) 200VT . . . . . . . . . . . . . . . . . . . . B3106 (Fig. 1V)
152 . . . . . . . . . . . . . . . . . . . . . . . B3061 (Fig. 42) 227S . . . . . . . . . . . . . . . . . . . . . B3191 (Fig. 41)
158 . . . . . . . . . . . . . . . . . . . . . . . . B3132 (Fig. 9) 265P . . . . . . . . . . . . . . . . . . . . B3151 (Fig. 220)
165 . . . . . . . . . . . . . . . . . . . . . . . . . HN (Fig. 113) 650-266-75 . . . . . . . . . B3014N (Fig. 309N)
166 . . . . . . . . . . . . . . . . . . . . DS15x2 (Fig. 125) 81CT . . . . . . . . . . . . B3198HCT (Fig. 301CT)
175 . . . . . . . . . . . . . . . . . . . . . . . . B3140 (Fig. 4)
176 . . . . . . . . . . . . . . . . . . . . . . . . . LW (Fig. 117)
179 . . . . . . . . . . . . . . . . . . . . . . . . B3148 (Fig. 7)
192 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 65
200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3104
220 . . . . . . . . . . . . . . . . . . . . . . . . . . B3080 L & S
(Fig. 343 LONG &
Fig. 343 SHORT)
222 . . . . . . . . . . . . . . . . . . . . . . . B501 (Fig. 111)
227 . . . . . . . . . . . . . . . . . . . . . . . B3190 (Fig. 40)
Index
65XT ....................................................... 33 B200 .................................................... 243 B3067 .................................................. 210
65XT-3/8 ............................................... 33 B201 .................................................... 243 B3068 .................................................. 206
66 ............................................................. 34 B202 .................................................... 243 B3069E ............................................... 211
67SS ....................................................... 35 B202-1 ................................................ 243 B3069W .............................................. 211
68S ......................................................... 32 B202-2 ................................................ 243 B3070 .................................................. 215
68SS ....................................................... 35 B218 .................................................... 113 B3080L ................................................ 222
68W ........................................................ 32 B219 .................................................... 114 B3080S ............................................... 222
69 ............................................................ 37 B303 thru B309 .................................. 36 B3082 .................................................. 226
69R ......................................................... 38 B312 ....................................................... 39 B3083 .................................................. 221
75 .......................................................... 219 B321 ....................................................... 36 B3083WO ........................................... 221
78 .......................................................... 214 B351L .................................................... 28 B3084 .................................................. 225
98 .......................................................... 237 B379 .................................................... 115 B3085 .................................................. 223
98B ....................................................... 237 B479 .................................................... 116 B3086 .................................................. 224
109A ..................................................... 192 B501 .................................................... 230 B3088 .................................................. 125
109AF .................................................. 194 B655 .................................................... 242 B3088S ............................................... 126
120 .......................................................... 68 B656 .................................................... 242 B3088T ................................................ 125
120MJ .................................................... 69 B1999.....................................................271 B3088ST ............................................. 126
120RWA ................................................ 67 B2400 .............................................. 91-92 B3089 .................................................. 128
120W ...................................................... 69 B2417 .................................................. 143 B3090 ......................................... 129-130
130 .......................................................... 46 B2499 .................................................. 195 B3092 ......................................... 133-134
200 .......................................................... 61 B2500 .................................................. 196 B3093 ......................................... 135-136
200C ....................................................... 61 B2503 .................................................. 199 B3094 .................................................. 139
200F ....................................................... 61 B2505 .................................................. 198 B3095 ......................................... 131-132
200H ....................................................... 62 B2506 .................................................. 198 B3096 .................................................. 127
800 ....................................................... 173 B2507 .................................................. 198 B3097 .................................................. 137
825 ....................................................... 174 B2508 .................................................. 198 B3098 .................................................. 138
825A ..................................................... 175 B3014 .................................................. 197 B3100 .............................................. 49-50
828 ....................................................... 176 B3014N ............................................... 197 B3100C ................................................. 53
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Index
BL1410 .................................................. 71 DBP ...................................................... 274
BL1420 .................................................. 71 DBR__ Series ................................... 281
BL1430 .................................................. 71 DBR10-12 .......................................... 282
BL1440 .................................................. 71 DS16 x 2 ............................................. 241
BL1450 .................................................. 71 FW ........................................................ 246
BL1460 .................................................. 71 FFW ..................................................... 246
BL1470 .................................................. 71 HES ............................................. 263-264
BL1480 .................................................. 71 HESL ........................................... 263-264
BL1490 .................................................. 71 HHN ..................................................... 245
BPH250 .............................................. 164 HME ............................................ 257-258
BPH350 .............................................. 164 HMLE ......................................... 257-258
BPH450 .............................................. 164 HMLT .......................................... 259-260
BPH550 .............................................. 164 HMT ............................................ 259-260
BPH650 .............................................. 164 HN ........................................................ 245
BPH850 .............................................. 164 HSL ............................................. 261-262
BPIC Series ...................................... 104 HS ................................................ 261-262
BPRC Series ..................................... 103 ISO ....................................................... 271
BPS225 ...................................... 165-166 LW ........................................................ 246
BPS325 ...................................... 165-166 N2500 .................................................. 196
BPS425 ...................................... 165-166 NNP ..................................................... 251
BPS525 ...................................... 165-166 NVD ...................................................... 253
BPS625 ...................................... 165-166 OM ............................................... 255-256
BPS862 ...................................... 165-166 OML ............................................ 255-256
BPSC Series ..................................... 104 RHB ..................................................... 266
BRC CABLE ...................................... 185 RHC ..................................................... 266
BVP ...................................................... 270 RHD ..................................................... 266
BVS ...................................................... 253 SC228 .................................................. 237
BVT ...................................................... 269 SHE ............................................. 267-268
CLDP10 .............................................. 283 VRP ...................................................... 252
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
© 2013 Eaton
All Rights Reserved Eaton is a registered trademark
Printed in USA
Publication No. PH-13 All other trademarks are property
September 2013 20M of their respective owners.