Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Coiled Tubing
➢ Pumping Applications:
• Acidizing / Fracturing / Nitrogen Kick Off
• Sand or Fill Clean Out
• Pumping Cement Slurry Plugs
• Scale Removal (Hydro-Jetting)
➢ Mechanical Applications:
• Fishing or Retrieving Plugs / Packers
• Drilling / Milling (Hard Scale or Bridge Plugs)
• Tubular Cutter
• Permanent Coiled Tubing (Completion, Velocity String)
• Selective Zone Isolation and Setting Packers
Gooseneck or
guide-arch
Or Pore Pack
LN2 Hoses
Boost pump
C – PUMP Water
Vaporizer
Nitrogen Units Series high pressure pump was specifically designed to deliver high flow rates at high pressure while providing
exceptional low flow rate turndown.
The pump set is a self-contained skid unit and capable of pump and vaporizing different flow rates up to 180,000 SCFH and
maximum Pressure of 10,000 Psi. The minimum outlet gas temperature at full rate will not be lower than 70 degrees
Fahrenheit. The energy required to vaporize the liquid nitrogen comes from two sources: engine heat recovery and hydraulic
system heat recovery.
The heat recovered from the hydraulics is transferred to the engine coolant circuit through a tube and shell heat exchanger.
The total energy captured from the coolant and hydraulics is than used to vaporize liquid nitrogen in the nitrogen pot
vaporizer.
Blind
Shear
Slip
Pip
BOP Combi
Blind/Shear
Slip/Pip
BOP Combi
C-Pump Skid
Wilden Pump
Coflex Hose
Riser
Check Valve