Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
PROPERTIES
50
40
Limited application area. Technical consultation is mandatory.
30
20 Pressure - Temperature diagrams are the most current method for determining the suitability
10 of a gasket material in a known application. Maximum figures for temperature and pressure can
0 be misleading. Max. temperature and max. pressure represent maximum values and should not
-50 0 50 100 150 200 250
TEMPERATURE [˚C] be used simultaneously. They are given only for guidance, since these max. values depend not
only on the type of gasket material used but also on the assembly conditions. Please use the
BO DIAGRAM Pressure - Temperature diagrams to check the suitability of the chosen gasket material for your
application (combination of pressure and temperature).
DIN 28090-1
200
180 BA-50 0.5 mm
BA-50 1 mm
160 BA-50 1.5 mm
BA-50 2 mm
140 BA-50 3 mm This diagram describes characteristic values of gasket materials for static seal for use in
120
flanged applications. Given the wide range of gasket applications, these values should merely be
BO [MPa]
100
80 considered as a means of assembling the sealing behaviour of gasket under service conditions.
60 Sigma diagram shows the maximal allowed surface pressure (maximum in-service compressive
40 pressure) on gasket at operating service temperature for different material thicknesses.
20
0
0 25 50 75 100 125 150 175
TEMPERATURE [˚C]
BA-50
BA-50
Acetamide Ethyl acetate Oleum
All information and data quoted are based upon years of experience in the production and operation of sealing elements. This data may not be used
to support any warranty claims. With its publication this latest edition supersedes all previous issues and is subject to change without further notice.
Issue date: 16. 1. 2015