Sei sulla pagina 1di 36

Thermaco Technology

Trapzilla Grease Interceptors


What is a grease interceptor?

• In general, we call it grease trap.

• It trap the grease from the wastewater before entering the sewer
waste system.

2
Where is the grease coming from?

• We are looking at main source of grease is from kitchen wastewater.

Restaurant
Food court
Canteen

3
What are the problems caused by grease?

• When it is not properly intercepted and trapped, grease will creates a


lot of problems.

Accumulate into large masses and clogs pipes.


Grease adheres to internal pipe surface reduces flow and eventually
clogged the pipe.
Cost of repair works increases.
upset wastewater treatment plant.
Etc.

4
Typical conventional grease trap
Outlet compartment Inlet compartment

• Grease holding capacity could be limited as grease carry over to outlet


compartment is observed.

5
Thermal Inversion protection feature
What is Thermal Inversion ?
Efficiency losses that result from warm kitchen effluent rising up in a
grease trap to displace a portion of the existing grease mat and flood
the outlet flows with grease.

25% Rule for Pumping - Results


in poor in-field efficiencies as
traditional grease traps approach
25% full of grease.

Studies have found that with as


little as a 2.5℃ (4℉) difference
between the incoming kitchen
effluent and the water
temperature within the grease
separator a thermal inversion
condition occurs.
Trapzilla Grease Interceptors

7
Size and Model

8
High separation efficiency feature
(Flat separation curve)
For example Model TZ-1826
• Designed to hold 91% of its volume in grease.
• That is 1826 lbs. of grease to be stored in the interceptor.
• During the grease accumulation, the grease separation
efficiency will be maintained as high as 99% in average.

9
Size and Model

TZ-400 TZ-600
How Trapzilla work?

11
Thermal Inversion has Non-Effects in a Trapzilla

•This is the main reason


Trapzilla performs so well in
ASME Test.
•Trapzilla’s Horizontal Baffle
protects grease layer (stored
grease) from warm effluent
rising up to displace cool water
along with grease.
Video (How Trapzilla work?)

Trapzilla Grease Interceptor Operation Video.mp4

13
Overview of Features
• Solids Clearing Conical Bottom
• Multi-Optional Pumping Ports
• Light weight and easy Installation
• Structural Toughness
• Versatility in Application
• No electrical component
• No moving mechanism
• No wear and tear part
• Compact footprint
• Constructed of corrosion resistant,
linear low-density polyethylene
• Low Cost Relative to the
Competition
• Super Capacity Grease Storage in
a Small Space
Solids Separator

15
Solid Separator Models

16
Solids Separator and Grease Interceptor

TZ Trapzilla Grease
Interceptor

TSS Trapzilla Solids


Separator

17
Installation for Double Capacity
Installation for Multiplying Capacity

Trapzill Trapzill Trapzill Trapzill


a a a a

Multiple Trapzillas Plumbed in Parallel


Installation types

• Hanging assembly
installation
• Above-ground
model
• In-ground model

20
Above-Ground model Installation
Using the Support Stand Trapzilla Option SSA-400/600

St. Petersburg Florida College


Above-Ground model with Flow Splitter

McCormick & Schmick’s Seafood Restaurant, Burbank, CA


In-Ground model installation
In-Ground model installation

Edo. de México.

Trapzilla Model TZ-400

Restaurant VIPS
In-ground model installation in Singapore

Preparing the foundation for Trapzilla leveled on concrete pad


TZ-600 & TSS-95
In-ground model installation in Singapore

Project completed
end Sept 2009
Trapzilla Installation Options and Configurations
Hanging Assembly - Allows
Trapzilla to hang from ceiling
into interstitial space in
buildings. Support Stand Assemblies
– used to support the
Trapzilla unit when installed
directly on the floor.
Extension Collar -
Extends top of Trapzilla
to match installation pipe
depth. Also includes
corresponding solids
conduit extension.

Flow Splitter - Allows multiple


Trapzillas to be plumbed in parallel to
cater for flow and grease capacity
required.

Aluminum Diamond Plate Cover – Gives Trapzilla


a top with more traction for high pedestrian traffic
areas that tend to produce slick surfaces because of
moisture, spills, or dirt.
Servicing Trapzilla
Trapzilla installation in Singapore, Junction 8
- Installed in basement car park area

29
Trapzilla installation in Singapore, Junction 8
- Grease Interceptor with Solids Separator

30
Trapzilla installation in Singapore, Junction 8
- 4 sets of Trapzilla TZ-600-SSA + TSS-95-SSA

31
Trapzilla effluent discharge to Ejector Tank
- Enclosed Stainless Steel Ejector Tank System

32
Ejector pumps controller using Flygt SmartRun

33
Our warehouse

34
Our warehouse

35
THANK YOU
Questions?

Contact
Ting See Tho
Product Manager
Xylem Water Solution Malaysia Sdn Bhd
Lot 59 Jalan Tanjung Medan 26/12, 40000 Shah Alam, Selangor, Malaysia
P: +603 5102 6819 M: +6012 236 8165 E: seetho.ting@xyleminc.com

36

Potrebbero piacerti anche