Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Xantrex™
Renewable Energy
and Backup Power
Catalog
Inverters
Inverter/Chargers
System Components
Battery Chargers
Powerpacks
www.xantrex.com
Renewable Energy & Backup Power Catalog
Contents
Glossary 2-3
System Basics 4-5
Solar Inverters
GT Series 6
GT30E 8
GT100E 10, 11
GT250E 10, 12
GT500E 10, 13
Inverter/Chargers
XW Hybrid Inverter/Charger 14
Trace Inverter/Chargers 16
Inverters
Prosine 18
About Xantrex™
XPower Inverters 20
Xantrex Technology Inc. is a world leader Xantrex products convert and control Battery Chargers
in the development, manufacturing and raw electrical power from any central, XC Battery Chargers 22
marketing of advanced power electronic distributed, renewable, or backup power Powerpacks
XPower PP 175 Plus 24
products and systems. Xantrex makes a source into high-quality power required
XPower PP 300/300 Plus 26
positive difference in the lives of people by electronic and electrical equipment.
XPower PP 400 Plus 28
around the world by combining proven Xantrex products meet the needs of a Charge Controller
technology with unparalleled market wide range of customers as stand-alone XW Charge Controller 30
understanding to bring electricity to power products, as key components C Series Charge Controller 32
customers anytime, anywhere. integrated into equipment produced C12 Charge Controller 34
by others, or combined with a power Accessories
Xantrex operates in the higher growth source to provide self-contained power Gateway 36
and higher value segments of the solutions. Xantrex products are smaller,
advanced power electronics market. Its lighter, smarter, more efficient and
well-established products are sold to more reliable than traditional power
a diverse customer base in renewable, conversion equipment.
programmable, mobile, and portable
power markets.
What is an inverter?
Modern inverters have caused a quiet revolution in the way we live with indepen-
dent power systems, providing silent AC electricity anytime, anywhere. An inverter
is a sophisticated microprocessor controlled device that transforms the DC power
collected from your renewable energy source into household (AC) electricity. An
inverter that is connected to the grid allows you to sell the excess renewable power
you harvest to the utility company.
What is an inverter/charger?
An inverter/charger combines an inverter, battery charger, and transfer switch in
one box. In addition to converting DC power from the renewable energy source into
AC power, an inverter/charger can also convert AC power from a generator into DC
power to recharge batteries. To ensure the power supply is uninterrupted, some
models feature automated generator start and stop capabilities, so supplementary
power is automatically produced as necessary. The inverter/charger’s ability to
process multiple forms of incoming power makes it a popular choice for off-grid
applications as it provides homes with a completely autonomous supply
of electricity.
Sine Wave
Modified Sine Wave Inverters
Modified sine wave inverters can adequately power most household appliances Modified Sine Wave
and power tools. These inverters are less expensive. However, this waveform may
present certain compromises with some loads such as microwave ovens, laser
printers, clocks, and cordless tool chargers.
1
Glossary of Terms
Glossary of Terms
System Basics System Overview
The system illustrated here is a solar electric hybrid system that offers additional
automatic features. It consists of a solar array, a battery bank, our top-of-the-line
Xantrex XW Inverter/Charger, a charge controller that manages battery charging
from the solar array, and a generator. When the sun is up, the solar panels
generate power to charge batteries and provide electricity. At night, the Xantrex
inverter/charger automatically runs your electrical equipment from your battery
bank. The generator provides additional back-up battery charging capability
for extended periods of cloudy weather. The Xantrex inverter/charger can
automatically start the generator and initiate a recharge cycle when the battery
bank is depleted or a load is too large for the batteries to support independently.
Grid tie system using GT Series Inverter
GT Series Grid Tie Inverters (Single phase)
When Xantrex set out to develop the High Performance String Full Featured Inverter Display
Grid Tie Solar Inverters we listened to Inverters and Communications
the experts – renewable energy
From 2,5 kW to 5,0 kW Liquid Crystal Display (LCD)
dealers and installers. The result is
Superior PV energy harvest LCD vibration sensor allows the tap
high performance inverters that make
Peak inverter efficiency of a finger to turn backlight on and
utility interactive installations easier
Excellent thermal performance display screen cycling
and more cost effective. Our high
Bright LED indicators provide
performance PV string inverters offer
high efficiency, lower installed cost, Easy and Affordable to Install system status at a glance
PC software for remote monitoring
improved aesthetics and high Wide PV input MPPT tracking
reliability. The GT Series inverters are and system troubleshooting
voltage range makes module
high quality products that offer the selection and sizing extremely
best price/performance ratio in flexible
the industry. Includes a lightweight and versatile
mounting bracket that simplifies
installation
Modular design allows inverters
to be mounted side-by-side
Lightweight and compact size
Rugged IP54 inverter enclosure
allows reliable outdoor and
indoor installations
Solar Inverters
Electrical Specifications
GT2.5DE GT3.8DE GT2.8SP GT3.8SP GT5.0SP
Maximum AC power output 2500 W 3800 W 2800 W 3800 W 5000 W
Nominal AC power output 2300 W 3500 W 2500 W 3300 W 5000 W
DC input voltage range 195 to 600 Vdc 195 to 600 Vdc 195 to 600 Vdc 195 to 600 Vdc 240 to 600 Vdc
Peak power tracking voltage range 195 to 550 Vdc 195 to 550 Vdc 195 to 550 Vdc 195 to 550 Vdc 240 to 550 Vdc
Current THD < 3% < 3% < 3% < 3% < 3%
Peak inverter efficiency 95% 95,3% 95% 95,3% 96%
(includes transformer) (includes transformer) (includes transformer) (includes transformer) (includes transformer)
Euro efficiency 94% 94,5% 94% 94,5% 95,2%
(includes transformer) (includes transformer) (includes transformer) (includes transformer) (includes transformer)
Maximum continuous output current 12,5 Aac 19 Aac 14,5 Aac 19 Aac 23 Aac
Over current protection 15 A 20 A 20 A 20 A 30 A
Night time tare loss 1W 1 W 1W 1 W <1 W
Mechanical Specifications
Operating temperature range -25ºC to 65ºC -25ºC to 65ºC -25ºC to 65ºC -25ºC to 65ºC -25ºC to 65ºC
Enclosure type IP54 IP54 IP54 IP54 IP54
Unit weight 20 kg 20,5 kg 19,5 kg 20 kg 22,3 kg
Shipping weight 26 kg 26,5 kg 25,5 kg 26 kg 27,2 kg
Inverter dimensions (H x W x L) 59,7 x 40,3 x 13,6 cm 59,7 x 40,3 x 13,6 cm 59,7 x 40,3 x 13,6 cm 59,7 x 40,3 x 13,6 cm 59,7 x 40,3 x 13,6 cm
Mounting Wall mount (mounting bracket included)
Regulatory Approvals
CE marked according to the following EU directives and standards:
EMC Directive EN 61000-3-2, EN 61000-3-3, EN 61000-6-1, EN 61000-6-3, EN61000-6-1:2001, EN61000-6-3/A11:2004
Low Voltage Directive EN50178:1997 and EN60529/A1:2000
Other approvals Royal Decree RD 661-2007, RD 1663/2000, BGFE Certified to VDE0126
GT30E Grid Tie Solar Inverter (Three phase)
Solar Inverters
Electrical Specifications
Nominal power rating (AC) 29,9 kW
Nominal AC voltage 400 V, 3-phase
Nominal AC frequency 50 to 60 Hz
Line power factor > 0,99 above 20% rated power
AC current distortion < 4% THD at rated power
Nominal power (DC) 71 Adc
Night consumption 1W
Min DC voltage for feed-in 450 Vdc
Suggested PV power 25 to 35 kWp
Nominal power rating (DC) 31,9 kW
Max open-circuit voltage 840 Vdc
Power tracking window range 450 to 800 Vdc
Max efficiency 95% incl. transformer
European efficiency 94,2% incl. transformer
General Specifications
Ambient temperature range - 0ºC to 50ºC
Enclosure environmental rating IP20 (optional IP21)
Enclosure Powder-coated aluminum
Weight 80 kg
Dimensions (H x W x D) 71 x 47,5 x 34,7 cm
Relative humidity 0 to 95%, non-condensing
Regulatory Approvals
Labeled with CE mark and complies with applicable European Directives:
EMC Directive EN50081-2, EN50082-2
Low Voltage Directive EN50178; complies with the requirements of VDEW
The GT30E complies with the requirements of the Royal Decree, Spain
Note: Specifications subject to change without notice
GT Inverters: GT100E/GT250E/GT500E (Three phase)
10
Solar Inverters
Electrical Specifications
Continuous power rating 100 kW AC
Nominal DC power rating 105 kW DC
Nominal AC voltage 400 Vac three phase
Nominal AC frequency 50 Hz
Line power factor > 0,99 above 20% rated power
Maximum AC line current 164 Aac
AC current distortion < 3% THD at rated power
Max. open circuit voltage 650 Vdc
Power tracking window range 300 to 650 Vdc
Max. DC input current 319 Adc
Peak inverter efficiency 96,6% (includes transformer)
European weighted efficiency 96%
Standby tare losses 93 W
General Specifications
Ambient temperature range -10ºC to 45ºC
Enclosure environmental rating IP21
Enclosure Rittal TS Series
Weight 870 kg
Dimensions (H x W x L) 190,5 x 120,5 x 60,6 cm
Altitude up to 2000 m without de-rating
Relative humidity 0 to 95% non-condensing
Regulatory Approvals
The GT100E is compliant to applicable European directives and CE marked :
EMC Directive EN 50081-2, EN 50082-2
Low Voltage Directive EN 50178
The GT100E complies with the requirements of VDEW
The GT100E is approved by the TÜV Rheinland
The GT100E complies with the requirements of the Royal Decree, Spain
Note: Specifications subject to change without notice.
11
GT Inverters: GT100E/GT250E/GT500E (Three phase)
Electrical Specifications
Continuous power rating 250 kW AC
Nominal AC voltage 315 Vac three phase (other voltage levels on request)
Nominal AC frequency 50 Hz (60 Hz on request)
Line power factor > 0,99 above 20% rated power
AC current distortion < 3% THD at rated power
Maximum AC line current 460 Vdc
Standby tare losses < 100 W
Night consumption < 100 W
Minimum DC voltage for feed-in 450 Vdc
Suggested PV power 280 kWp
Maximum DC current 555 A
Maximum open circuit voltage 880 Vdc (optional 880 Vdc)
Power tracking window range 450 to 800 Vdc
Maximum efficiency 97,5% at medium voltage level
European efficiency 96,6% at medium voltage level
General Specifications
Ambient temperature range -10°C to 45°C
Enclosure environmental rating IP21
Enclosure Rittal TS Series
Weight 1160 kg
Dimensions (H x W x L) 211,2 x 200,6 x 60,5 cm
Altitude up to 1500 m without de-rating
Relative humidity 0 to 95% non-condensing
Regulatory Approvals
The GT250E is compliant to applicable European directives
The GT250E complies with the requirements of VDEW
The GT250E complies with the requirements of the Royal Decree, Spain
12
Solar Inverters
Electrical Specifications
Continuous power rating 500 kW AC
Nominal AC voltage 315 Vac three phase (other voltage levels on request)
Nominal AC frequency 50 Hz (60 Hz on request)
Line power factor > 0,99 above 20% rated power
AC current distortion < 3% THD at rated power
Maximum AC line current 920 A
Stand-by tare losses < 100 W
Night consumption < 100 W
Minimum DC voltage for feed-in 450 V
Suggested PV power 560 V
Maximum DC current 1120 V
Maximum open circuit voltage 880 Vdc
Power tracking window range 450 to 800 Vdc
Peak efficiency 98,1%
European efficiency 97,3%
General Specifications
Ambient temperature range -10ºC to 45ºC
Enclosure environmental rating IP21
Enclosure Rittal TS Series
Weight 1770 kg
Dimensions (H x W x L) 211,2 x 240,6 x 60,5 cm
Altitude up to 1500 m without de-rating
Relative humidity 0 to 95% non-condensing
Regulatory Approvals
The GT500E is compliant to applicable European directives and CE marked
The GT500E complies with the requirements of VDEW
The GT500E complies with the requirements of the Royal Decree, Spain
13
XW Hybrid Inverter/Charger
The next generation inverter/charger for renewable energy systems and backup power applications
14
Inverter/Chargers
Electrical Specifications
Model XW6048-230-50 XW4548-230-50 XW4024-230-50
Continuous output power 6000 W 4500 W 4000 W
Surge rating 12000 W 9000 W 8000 W
Surge current 53 A rms 40 A rms 35 A rms
Waveform True sine wave True sine wave True sine wave
Peak efficiency 95,4% 95,6% 94%
Idle consumption - search mode < 7 W < 7 W <7W
AC connections AC1 (grid), AC2 (generator) AC1 (grid), AC2 (generator) AC1 (grid), AC2 (generator)
AC input voltage range (bypass/charge mode) 156 to 280 Vac (230 V nominal) 156 to 280 Vac (230 V nominal) 156 to 280 Vac (230 V nominal)
AC input frequency range (bypass/charge mode) 40 to 68 Hz (50 Hz nominal) 40 to 68 Hz (50 Hz nominal) 40 to 68 Hz (50 Hz nominal)
AC output voltage 230 Vac +/- 3% 230 Vac +/- 3% 230 Vac +/- 3%
Maximum AC pass through current 56 A 56 A 56 A
AC output continuous current 26,1 A 19,6 A 17,4 A
AC output frequency 50 Hz +/- 0,1 Hz 50 Hz +/- 0,1 Hz 50 Hz +/- 0,1 Hz
Total harmonic distortion < 5% at rated power < 5% at rated power < 5% at rated power
Typical transfer time 8 ms 8 ms 8 ms
DC current at rated power 131 A 96 A 178 A
Utility-interactive Disabled (default), AC voltage range 198 to 253 Vac, AC frequency range 49,1 to 50,9 Hz
DC input voltage range 44 to 64 V 44 to 64 V 22 to 32 V
Continuous charge rate 100 A 85 A 150 A
Power factor corrected charging PF (0,98) PF (0,98) PF (0,98)
Mechanical Specifications
Mounting Wall mount, backplate included
Inverter dimensions (H x W x D) 58 x 41 x 23 cm 58 x 41 x 23 cm 58 x 41 x 23 cm
Inverter weight 57 kg 52 kg 52 kg
Shipping dimensions 71,1 x 56,5 x 26,7 cm 71,1 x 56,5 x 26,7 cm 71,1 x 56,5 x 26,7 cm
Shipping weight 60 kg 55 kg 55 kg
Supported battery types Flooded (default), Gel, AGM, custom Flooded (default), Gel, AGM, custom Flooded (default), Gel, AGM, custom
Battery bank size 100 to 10000 Ah 100 to 10000 Ah 100 to 10000 Ah
Battery temperature sensor Included Included Included
Non volatile memory Yes Yes Yes
Display panel Status LEDs indicate AC In status, faults/warnings, equalize mode, On/Off and equalize button battery level.
Three-character display indicates output power or charge current
Multiple unit configurations Single phase: up to 3 parallel units. Three-phase: 1 unit per phase
System network Xanbus™ Xanbus™ Xanbus™
Warranty Five years Five years Five years
Environmental Specifications
Enclosure type IP 20 (sensitive electric components sealed inside enclosure)
Operational temperature range -25°C to 70°C -25°C to 70°C -25°C to 70°C
Accessories
Remote display Optional XW System Control Panel monitors and configures all devices connected to Xanbus™ Network
Generator support Optional XW Automatic Generator Start module connects to Xanbus™ Network. Automatically activates generator to recharge
depleted battery bank or assist inverter with heavy loads
Conduit Box Optional XW Conduit Box encloses the bottom of the inverter and protects the cabling. Provides knockouts for 2 cm,
2,5 cm, 3,2 cm, 6 cm, and 6,5 cm conduit
Solar Charge Controller Optional XW Solar Charge Controller with MPPT delivers the maximum energy available from the PV array to the battery bank
Regulatory Approval
CE marked according to the following EU directives and standards:
EMC Directive EN61000-6-1, EN61000-6-3, EN61000-3-2, EN61000-3-3
Low Voltage Directive EN50178
Note: Specifications are subject to change without
15
Trace Series Inverter/Charger
16
Inverter/Chargers
Electrical Specifications
Model TR1512-230-50 TR1524-230-50 TR2424-230-50
Invert mode
Waveform Modified sine wave Modified sine wave Modified sine wave
Continuous output power 1500 VA 1500 VA 2400 VA
AC output voltage (rms) 230 Vac 230 Vac 230 Vac
AC output frequency 50 Hz 50 Hz 50 Hz
Rated AC output current 6,5 Aac 6,5 Aac 10,4 Aac
Surge capability max. output & duration:
Overload 10 sec rating 3000 VA 3000 VA 4800 VA
Short Circuit 10 sec rating 26,5±2,5 Apk 26,5±2,5 Apk 42±4 Apk
Adjustable load sensing range 10 to 480 W 10 to 480 W 10 to 480 W
DC input current at no load - search mode 0,35 A 0,20 A 0,20 A
Efficiency - peak > 92% > 91% > 94%
DC input voltage range 11 to 15 Vdc 22 to 30 Vdc 22 to 30 Vdc
Rated DC input current 158 A 77 A 121 A
Load power factor (allowed) 0,8 to 1,0 (leading or lagging) 0,8 to 1,0 (leading or lagging) 0,8 to 1,0 (leading or lagging)
Series operation No No No
Bypass / Charge mode:
AC input voltage range 120 to 253 Vac (wide), 180 to 253 Vac (narrow) 120 to 253 Vac (wide), 180 to 253 Vac (narrow) 120 to 253 Vac (wide), 180 to 253 Vac (narrow)
AC input frequency range 45 to 55 Hz (narrow-charge and pass-through), 45 to 68 Hz (wide-charge), 41 to 68 Hz (wide pass-through)
Built-In internal supplemental breakers 15 Aac bypass, 8 Aac charger 15 Aac bypass, 8 Aac charger 15 Aac bypass, 15 Aac charger
DC charger rate (adjustable) 10 to 70 A 5 to 35 A 10 to 70 A
AC input current at max. charge rate 5,9 A 6,0 A 10,4 A
AC input power factor 0,91 > 0,83 0,92
Multi-stage charging Yes - bulk, absorption and float, plus user-initiated equalize (for flooded batteries only)
Temperature compensation Battery temperature sensor included Battery temperature sensor included Battery temperature sensor included
Automatic transfer relay 15 amps 15 amps 15 amps
Transfer time (typical) < 40 ms (wide), < 20 ms (narrow) < 40 ms (wide), < 20 ms (narrow) < 40 ms (wide), < 20 ms (narrow)
Environmental Specifications
Dimensions (W x H x L) 21,6 x 18,4 x 54,6 cm 21,6 x 18,4 x 54,6 cm 21,6 x 18,4 x 54,6 cm
Weight 19 kg 18 kg 20 kg
Shipping Dimensions (W x H x L) 31,5 x 30 x 67,5 cm 31,5 x 30 x 67,5 cm 31,5 x 30 x 67,5 cm
Shipping Weight 23,6 kg 23,6 kg 23,6 kg
Operating temperature range 0°C to 50°C 0°C to 50°C 0°C to 50°C
Mounting Wall-mount Wall-mount Wall-mount
Warranty Two years Two years Two years
Regulatory Approvals
CSA Certified to CSA 107.1, UL1741, FCC Class B and Industry Canada, CE
17
Prosine Inverters
18
Inverters
Electrical Specifications
Model Prosine 1000i Prosine 1800i
Output power 1000 W 1800 W
Surge rating 1500 W 2900 W
Peak output current 11 A 20 A
Output voltage (at no load) 230 Vac RMS +/-3% 230 Vac RSM +/-3%
Output voltage (over full load and battery voltage range) 230 Vac RMS +4%, -10% 230 Vac RMS +4%, -10%
Output frequency 50 Hz+/-0,05 (crystal controlled) 50 Hz+/-0,05 (crystal controlled)
Output waveform True sine wave (< 3% THD) True sine wave (< 3% THD)
Peak efficiency 90% 90%
No load power draw (search mode) < 1,5 W < 1,5 W
No load power draw (idle mode) < 22 W < 22 W
Input voltage range (12 V / 24 V) 10 to 16 Vdc / 20 to 32 Vdc 10 to 16 Vdc / 20 to 32 Vdc
Transfer relay rating (hardwire/transfer relay models) 10 A 10 A
Transfer time AC to inverter and inverter to AC Max 2 cycles (typically 1 cycle) < 2,5 seconds with Powersave “ON”
General Specifications
Operating temperature range 0°C to 60°C 0°C to 60°C
Storage temperature range -30°C to 70°C -30°C to 70°C
AC output types Hardwire Hardwire
Hardwire with transfer relay Hardwire with transfer relay
Schuko AC receptacle Schuko AC receptacle
LCD display panel Removable; can be mounted remotely (requires remote interface kit - see part number section)
Recommended DC fuse (12 V model) 175 A (depending on applicable installation codes) 300 A (depending on applicable installation codes)
Recommended DC fuse (24 V model) 90 A (depending on applicable installation codes) 100 A (depending on applicable installatin codes)
Dimensions (H x W x L) 11,5 x 28 x 39 cm 11,5 x 28 x 39 cm
Weight 7,0 kg 7,5 kg
Warranty Two years Two years
Regulatory Approvals
CE mark - Low Voltage Directive (EN50091-1), EMC Directive (EN50091-2)
e-mark - Automotive EMC Directive 95/54/EC
19
XPower Inverter 150, 300 & 500
20
Inverters
Electrical Specifications
Models 150 300 500
Output power (continuous) 150 W 300 W 500 W
Surge capacity (peak) 300 W 600 W 1000 W
Output voltage 230 Vac +/- 5% 230 Vac +/- 5% 230 Vac +/- 5%
Output frequency 50 +/- 3Hz 50 +/- 3Hz 50 +/- 3Hz
Output waveform Modified sine wave Modified sine wave Modified sine wave
Peak efficiency 90% 90% 90%
No load current draw < 0,18 A < 0,2 A < 0,3 A
Input voltage range 10 to 15 Vdc 10 to 15 Vdc 10 to 15 Vdc
General Specifications
Operating temperature range 0°C to 40°C 0°C to 40°C 0°C to 40°C
AC receptacle Schuko, UK and AUS/NZ Schuko, UK and AUS/NZ Schuko, UK and AUS/NZ
Display Power ON and Fault LEDs Power ON and Fault LEDs Power ON and Fault LEDs
Battery connection DC lighter plug DC lighter plug or cable clamps Cable clamps and hardwire
Mounting bracket None Built-in Built-in
Internal DC fuse Not user replaceable Not user replaceable Not user replaceable
Dimensions (H x W x L) 6,3 x 10,4 x 15,7 cm 6,6 x 10,4 x 20 cm 6,6 x 11,2 x 24,1 cm
Weight 0,65 kg 0,79 kg 1,2 kg
Warranty Two years Two years Two years
Regulatory Approvals
XPower Inverter 150 CE, TUV/GS, e-mark
XPower Inverter 300/500 CE, TUV/Type approved, e-mark
21
XC Series Battery Chargers (12 V & 24 V)
22
Battery Chargers
Electrical Specifications
Models XC3012 XC5012 XC1524 XC2524
Output current 30 A 50 A 15 A 25 A
Output voltage 12 Vdc 12 Vdc 24 Vdc 24 Vdc
Input voltage 100 to 260 Vac 47 to 63 Hz 100 to 260 Vac 47 to 63 Hz 100 to 260 Vac 47 to 63 Hz 100 to 260 Vac 47 to 63 Hz
Power factor correction Yes Yes Yes Yes
Multi-stage charging Selectable 2 stage, 3 stage, or custom
Temperature compensation 3 channels 3 channels 3 channels 3 channels
Charger efficiency (nominal) 80% 80% 83% 83%
Battery types accommodated AGM, PBCa Gel, or flooded on any channel
Recommended battery size > 60 Ah > 100 Ah > 30 Ah > 50 Ah
General Specifications
Operating temperature range 0°C to 50°C (50°C to 65°C de-rated)
Storage temperature -40°C to 80°C -40°C to 80°C -40°C to 80°C -40°C to 80°C
DC output connections M6 Studs M6 Studs M6 Studs M6 Studs
AC input connections Hardwire Hardwire Hardwire Hardwire
Dimensions (H x W x L) 10,6 x 24 x 36,8 cm 10,6 x 24 x 36,8 cm 10,6 x 24 x 36,8 cm 10,6 x 24 x 36,8 cm
Weight 5 kg 6 kg 5 kg 6 kg
Digital remote display Included Included Included Included
Battery temperature sensor 1 included 1 included 1 included 1 included
Warranty Two years Two years Two years Two years
Options
Battery temperature sensor for 2nd and 3rd banks - all models
Easy shunt / Battery monitor for all models
Regulatory Approvals
Meets CSA 107.2, UL 1564, UL 1236 including marine supplement, ignition protection
EMC FCC Class B
CE marked, meeting LVD and EMC directives, as well as VCA compliance (e-mark)
23
XPower Powerpack 175 Plus
175 100
From W portable AC power
kW to 500 with 17 Bar
kW Three-Phase (250Conversion
Power psi) air compressor
Center
Accessories
AC Charger - recharge XPower
Powerpack 175 Plus from a standard
wall outlet
DC Charging Cable - recharge
XPower Powerpack 175 Plus
from your vehicle
Nozzle Adapters - pump air into your
vehicle tyres or small inflatable
sports equipment
24
Powerpacks
Electrical Specifications
230 volt AC section 12 volt DC section
AC output power (max. continuous) 140 W Internal battery type Sealed lead acid, AGM
AC output power (5 minutes) 175 W Internal battery capacity 12 amp-hours, 120 CCA
AC surge power (peak) 280 W Internal battery voltage 12 Vdc (nominal)
AC output voltage (nominal) 230 V DC power socket (circuit breaker) 12 amps (automatic reset)
AC output frequency 50 Hz +/- 2 Hz
AC output waveform Modified sine wave
Inverter no-load current < 0,2 amps (battery drain with no load on inverter)
Charging system Charging time
AC charger bulk charging current 500 mA (maximum) From AC outlet max. 24 hours*
Peak charging voltage 14,2 V (nominal) From DC outlet max. 2,5 hours*
Charge restart voltage 12,9 V (nominal) *Maximum charging time occurs when battery is completely discharged.
Float charge current 1 mA (nominal)
Charger input socket current 2,5 A (maximum)
General Specifications
Jump-start cables 61 cm, 8 AWG
Air compressor 17 bar
Built-in incandescent light 5 W (replaceable)
Operating/storage temperature 0°C to 40°C / 0°C to 30°C
AC receptacle UK, Schuko
Inverter low battery alarm 11 V (nominal)
Inverter low battery shutdown 10,5 VS (nominal)
Dimensions (H x W x L) 22,1 x 15,5 x 31,5 cm
Weight 5,4 kg
Warranty Two years
Regulatory Approval
XPower Powerpack 175 Plus CE, e-mark
25
XPower Powerpack 300 Plus
022097
XPower Powerpack 300 Plus by Xan- XPower Powerpack 300 Plus Accessories
trex provides maximum 300 watts of
230-volt AC and 12-volt DC outlets Jumper Cables – use the XPower
silent household (AC) and DC power
anytime, anywhere. It’s a convenient to power most small household Powerpack to jump start vehicles
appliances AC Charger – recharge the XPower
source of power for year-round use
Built-in 300 watt inverter with Powerpack from a standard
and it’s ideal for weather emergencies,
power outages and car breakdowns. sealed, non-spillable 20 amp-hour wall outlet
AGM battery DC Charging Cable – use the XPower
The XPower Powerpack 300 Plus
17 bar air compressor to Powerpack to power DC-compatible
integrates a power source for small
AC and DC appliances, an emergency inflate vehicle tires and small appliances or to recharge the
light, and a vehicle battery booster. It sports equipment Powerpack from a car, truck,
Smart circuitry protects against SUV or RV
also includes a 17 bar air compressor.
reverse polarity jumpstart Nozzle Adapters pump air easily into
As the market for portable electronic
devices grows, so does the need to connections vehicle tires or small inflatable
Built-in fluorescent lights provide sports equipment
power these devices. The XPower Pow-
illumination in emergency situations Accessory bag – helps keep XPower
erpack provides the power to improve
AC and DC charger cables allow Powerpack’s accessories together
safety, efficiency and the quality of
daily life. recharging from home or in vehicle
Battery level meter to easily monitor
the status of the Powerpack battery
Applications
AC charger offers battery overcharge For outdoor use:
protection Pump air into small inflatable sports
Audible alarm signals when the unit equipment
begins to overheat, and in times Power camcorders, video games,
of under voltage conditions stereos, 33 cm TV/VCR, TV/DVD
Electrical current overload and combos, computers, laptops, clock
overheating protection ensure radios, and small power tools
a longer Powerpack life
For emergency situations:
Inflate vehicle tires
Jump-start vehicles
Power emergency lights, TVs,
and radios
26
Powerpacks
Electrical Specifications
230 volt AC section
AC output power 250 W (max. continuous)
AC output power 300 W (5 minutes)
AC surge power 500 W (peak)
AC output voltage 230 V (nominal)
AC output frequency 50 Hz +/-4 Hz
AC output waveform Modified sine wave
Inverter no-load current < 0,2 amps
12 volt DC section
Internal battery type Sealed lead acid, AGM
Internal battery capacity 20 amp-hours, 200 CCA
Internal battery voltage 12 Vdc (nominal)
DC power socket (circuit breaker) 12 A (automatic reset)
Cold cranking amps 200 A
Charging system
AC charger bulk charging current 500 mA (maximum)
Peak charging voltage 14,5 V (nominal)
Charge restart voltage 12,9 V (nominal)
Float charge current 1 mA (nominal)
Charging time
From AC outlet Max. 40 hours*
From DC outlet Max. 4 hours*
General Specifications
Air compressor 17 bar
Jump-start cables 1 meter, 8 AWG
Built-in fluorescent lamp Two, 4 W bulbs (replaceable)
Operating temperature 0°C to 40°C
Storage temperature 0°C to 30°C
AC receptacle Schuko, UK and AUS/NZ
Inverter low battery alarm 10,7 V (nominal)
Inverter low battery shutdown 10 V (nominal)
Dimensions (H x W x D) 30 x 18,2 x 31,8 cm
Weight 9 kg
Warranty Two years
27
XPower Powerpack 400 Plus
28
Powerpacks
Electrical Specifications
230 volt AC section 12 volt DC section
AC output power (max. continuous) 320 W Internal battery type Sealed lead acid, AGM
AC output power (5 minutes) 400 W Internal battery capacity 20 amp-hours, 200 CCA
AC surge power (peak) 640 W Internal battery voltage 12 Vdc (nominal)
AC output voltage (nominal) 230 V DC power socket (circuit breaker) 12 amps (automatic reset)
AC output frequency 50 Hz +/-4 Hz
AC output waveform Modified sine wave
Inverter no-load current < 0,2 A (battery drain with no load on inverter)
Charging system Charging time
AC charger bulk charging current 500 mA (maximum) From AC outlet max. 40 hours*
Peak charging voltage 14,2 V (nominal) From DC outlet max. 4 hours*
Charge restart voltage 12,9 V (nominal) *Maximum charging time occurs when battery is completely discharged.
Float charge current 1 mA (nominal)
Charger input socket current 2,5 A (maximum)
General Specifications
Air compressor 17 bar
Jump-start cables 61 cm, 6 AWG
Built-in incandescent light 5 W (replaceable)
Operating/storage temperature 0°C to 40°C / 0°C to 30°C
Inverter low battery alarm 11 V (nominal)
Inverter low battery shutdown 10,5 V (nominal)
Dimensions (H x W x L) 24,2 x 20,6 x 40,2 cm
Weight 9 kg
Warranty Two years
Regulatory Approval
XPower Powerpack 400 Plus CE, e-mark
29
XW Solar Charge Controller
Photovoltaic charge controller for 12, 24, 36, 48, and 60-volt DC battery systems
The Xantrex™ XW Solar Charge The XW SCC incorporates a dynamic Configurable auxiliary output
Controller (XW SCC) is a photovoltaic Maximum Power Point Tracking Two-line, 16-character liquid crystal
(PV) charge controller that tracks the (MPPT) algorithm designed to display (LCD) and four buttons for
electrical maximum power point of maximize energy harvest from the PV configuration and system monitoring
a PV array to deliver the maximum array. The MPPT constantly adjusts Input over-voltage and under-
available current for charging the operating points of the array voltage protection, output over-
batteries. When charging, the XW SCC to ensure it stays on the maximum current protection, and backfeed
regulates battery voltage and output power point. It does not stop energy (reverse current) protection (warning
current based on the amount of harvest to sweep the array like some and fault messages appear on LCD
energy available from the PV array and other competing products. This when unit shuts down as
state-of-charge of the battery. feature is beneficial all sunlight a protective measure)
conditions, especially in areas with Over-temperature protection and
The XW SCC can be used with 12, 24, fast moving cloud cover and quickly power derating when output power
36, 48, and 60-volt DC battery systems changing solar conditions. and ambient temperature are high
and is able to charge a lower nominal- Battery Temperature Sensor (BTS)
voltage battery from a higher nominal- Product Features included − automatically provides
voltage array. For example, the XW Maximum Power Point Tracking temperature compensated
SCC can charge a 12-volt battery from battery charging
(MPPT) delivers maximum available Xanbus™-enabled network
a 36-volt array. This provides flexibility
power from PV array to battery bank
for installers to use longer wiring runs Integrated PV ground-fault communications protocol
without compromising efficiency. (developed by Xantrex)
protection Five-year warranty
The XW Solar Charge Controller can Ultra-reliable, convection-cooled
be installed (in single or multi-unit
design does not require a cooling
configurations) with Xantrex XW
fan − large, aluminum, die-cast
Hybrid Inverter/Charger(s) or can be
heat-sink allows full output current
used in other solar energy systems
up to 45°C without thermal derating
where a solar charge controller is Selectable two or three-stage
needed.
charging algorithms with manual
equalization to maximize system
performance and improve
battery life
30
XW Solar Charge Controller
Electrical Specifications
Nominal battery voltage 12, 24, 36, 48, 60 Vdc
Maximum PV array voltage (operating) 140 Vdc
Maximum PV array open circuit voltage 150 Vdc
Array short-circuit current 60 Adc maximum
Maximum and minimum wire size in conduit #6 AWG to #14 AWG
Total power consumption while operating 2,5 W (tare)
Charger regulation method: Three-stage (bulk, absorption, float)
Two-stage (bulk, absorption)
Mechanical Specifications
Dimensions (H x W x D) 36,8 x 14,6 x 13,8 cm
Weight (controller only) 4,8 kg
Weight (shipping) 8 kg
Shipping dimensions (H x W x D) 48,3 x 22,9 x 35 cm
Mounting Vertical wall mount
Standard warranty Five years
Environmental Specifications
Enclosure type Indoor, ventilated, sheet metal chassis with 2.2 cm and 2.8 cm knockouts and aluminium heat-sink
Operating temperature range (full power) -20°C to 45°C
Storage temperature -40°C to 85°C
Altitude limit (operating) Sea level to 4572 m @ 15°C
Regulatory Approvals
Certified to CE, UL1741
31
Charge Controllers
32
C Series Controllers
Electrical Specifications
Model C35 C40 C60
Voltage configurations 12 and 24 Vdc 12, 24, and 48 Vdc 12 and 24 Vdc
Max. PV open circuit array voltage 55 Vdc 125 Vdc 55 Vdc
Charging / load current (@ 25°C) 35 Adc 40 Adc 60 Adc
Max. peak current 85 A 85 A 85 A
Max. voltage drop through controller 0,30 V 0,30 V 0,30 V
Typical operating consumption 15 mA 15 mA 15 mA
Typical idle consumption 3 mA 3 mA 3 mA
Recommended breaker size 45 A 50 A 60 A rated at 100% continuous duty
Recommended wire size #8 AWG #8 AWG #6 AWG rated at 90°C
Lead acid battery settings Adjustable Adjustable Adjustable
NiCad battery settings Adjustable Adjustable Adjustable
Load control mode Low voltage reconnect - adjustable (sticker provided with unit) all models
Low voltage disconnect - user selectable manual or automatic reconnection - (includes warning flash before disconnect
and provides a one time, user selected grace period) all model
General Specifications
Specified temperature range 0°C to 40°C 0°C to 40°C 0°C to 40°C
Enclosure type Indoor, ventilated, powder coated steel with 2 cm and 2.5 cm knockouts
Unit weight 1,2 kg 1,4 kg 1,4 kg
Shipping 1,4 kg 1,6 kg 1,6 kg
Dimensions (H x W x L) 20,3 x 12,7 x 6,4 cm 25,4 x 12,7 x 6,35 cm 25,4 x 12,7 x 6,35 cm
Shipping dimensions (H x W x L) 31,5 x 17,8 x 6,4 cm 31,5 x 17,8 x 6,4 cm 31,5 x 17,8 x 6,4 cm
Mounting Vertical wall mount - indoor only
Altitude - operating 4,572 m
Altitude - non-operating 15,240 m
Warranty Two years
Part numbers C35, C40, C60 - Controllers
CM - Front display panel
CM/R-50, CM/R-100 - Remote display panel
BTS - Battery temperature sensor
Regulatory Approvals
CE compliant , UL Listed to UL 1741 - 1999 and to CSA 22.2 No. 107.1-95 Standards
33
C12 Controller
Electrical Specifications
Maximum PV amps 12 A at 12 Vdc only
Maximum DC load 12 A with auto reset
Minimum operating voltage 6V
Maximum voltage drop - PV to battery 0,3 V
Maximum voltage drop - battery to DC load 0,5 V
Regulation setting 13 to 15 Vdc
Equalize setting Bulk plus 1 volt for two hours
Typical consumption while charging 0,007 A
Typical consumption at night 0,003 A
Typical consumption with load disconnected 0,003 A
Maximum stranded wire size #10 AWG stranded (5.2 mm2)
General Specifications
Allowed temperature range 0°C to 40°C
Enclosure type Powder coated steel with strain relief for wiring and knockouts for up to three ½" conduits
Unit weight 0,9 kg
Shipping weight 1,13 kg
Dimensions (H x W x L) 16,5 x 11 x 4 cm
Shipping dimensions (H x W x L) 20,3 x 11,7 x 4 cm
Mounting Vertical wall mount - indoor
Warranty Two years
Part numbers C12 - charge controller
Regulatory Approvals
ETL Listed to UL 1741 No. 2 and CSA C22.2 No 14
34
Accessories
35
Communications Gateway
The Xantrex™ Communication The Gateway includes both built- Product Features
Gateway bridges the gap between a in Wi-Fi and Ethernet connectivity
Xantrex GT or XW System and the allowing for flexible and simple set up Can monitor a network consisting
system owner’s computer, making for wireless or wired connection to a of up to 20 single phase GT
it the central component for a router or direct to a PC. inverters and up to 8 XW devices
residential or small commercial (XW inverter(s), XW Charge
Controller(s), XW SCP, and XW AGS)
remote monitoring system. The Gateway logs and
Wi-Fi/Ethernet module with 10/100
transmits performance data
The Gateway logs performance Base-T or 802.11 b/g
System power production Can be configured to send energy
data directly from the Xantrex GT
Inverter specific power production and alarm reports via email
or XW System, and transmits it to
Lifetime energy production; Graphical interactive solar
the included Yahoo™ Widget based
daily, weekly, monthly energy monitoring software
monitoring software for a simple
production graphs Embedded web page for configuring
and graphically rich view of system
Inverter faults with date the Gateway and upgrading
performance. More than a data logger,
and time stamp inverter firmware
the Gateway offers a web page with
the ability to configure automated 16 megabytes of storage
email reports and fault status to the
user or installer.
36
Accessories
Electrical Specifications
Communication Physical layer 2, CAN
Communication protocol Xanbus™
Maximum Xanbus™ cable length 40 m
Maximum Ethernet cable length 60 m
Connectors 3 RJ-45 – 8 pins (2 Xanbus, 1 Ethernet)
Communication Specifications
Ethernet IEEE Std 802.3™-2005
Wireless 802.11.4b and 802.11.4g; WEP and WPA security
Channels 1-11 (US/Canada), 1-9 (Europe)
Mechanical Specifications
Dimensions (H x W x D) 11,2 x 19,0 x 45 cm
Height including antenna 24,9 cm
Weight 0,21 kg
Regulatory Compliance
North America EMC FCC part 15B class B
Industry Canada ICES-003 class B
Europe
Safety Low Voltage Directive 2006/95/EC EN60950-1:2001
EMC EMC Directive 2004/108/EC, EN55022 A2: 2003, EN55024 A2: 2003
Telecom R&TTE Directive 1999/5/EC, ETSI EN 301 489-1 ver. 1.6.1, ETSI EN 301 489-17 ver. 1.2.1
37
About Xantrex™
europesales@xantrex.com
europemarketing@xantrex.com
www.xantrex.com
©2008 Xantrex Technology Inc. All rights reserved. Xantrex, Trace, Prosine
and Smart choice for power are trademarks of Xantrex International,
registered in the U.S. and other countries.