Sei sulla pagina 1di 1

MAN Diesel & Turbo

Item Name:
CVR-no. 31611792 (referred to as “MAN Diesel & Turbo”).
Germany registered with the Danish Commerce and Companies Agency under
Copyright 2011 MAN Diesel & Turbo, branch of MAN Diesel & Turbo SE,

Info. No.: Item Id.:

300610 ME Engines 300bar System 5151619-0


Scale: Size: Product Type: Page No.: Projection: MAN Diesel
A4 Shop Trials 29 (97) & Turbo
Date Des. Chk. A.C. Revision Change Chg. Not. Rev.
20120912 NIHV PXN X3 Troubleshooting Assistance inserted 08

D. Commissioning of Hydraulic Power Supply

Please note! Procedure for commissioning HPS is divided into 2 sections, one section
covering configuration with engine driven pumps and one section covering
configuration with El-driven Pumps.

Procedure for Engine Driven Pumps.

Preconditions and initial state.


Standby request, engine stopped, HPS mode = manual and standby-pumps stopped.

Check of Accumulators on HCU.

Action Expected result


the specific prior written permission of MAN Diesel & Turbo.
whom it has been submitted by MAN Diesel & Turbo, and may not be disclosed to any third party without
This drawing is the property of MAN Diesel & Turbo and is to be treated as confidential by the party to

Close valve 420 - High pressure inlet. The pressure in HCU are released (oil are drained from
1 Open valve 421 – HCU drain. HCU block).

Connect pressure test tool or digital instrument to Check pressure according below diagram. Pressure
2 the test coupling, pos. 340. tolerance should be within +/-5bar.

3 Close valve 421 and open valve 420. HCU is ready to be filled with oil.

Check of Accumulators on HPS.

Action Expected result

Open valve 315 – High pressure drain. The pressure in HCU and HPS are released (the oil are
1 drained from HCU and accumulator block)

Connect pressure test tool or digital instrument to Check pressure according below diagram. Pressure
2 the test coupling, pos. 340. tolerance should be within +/-5bar.

3 Close valve 315 – High pressure drain. HCU and Accumulator block are ready to be filled with oil.

Temperature (°C) 0 10 20 30 40 50 60 70 80 90 100


Pressure (bar) 124 130 136 142 148 154 160 166 172 178 185

Potrebbero piacerti anche