Heat transfer fluid based on mineral oil for heating and cooling systems
APPROVALS MEETS REQUIREMENTS
Heat transfer fluid DIN 51522 – Q
PRODUCT DESCRIPTION APPLICATION
LUKOIL THERMO 32 is particularly distinguished by LUKOIL THERMO 32 has fully proved its effectiveness its low vapour pressure, i.e. its high initial boiling point at over many years of application in asphalt hot-mixing atmospheric pressure. With its high resistance to systems, in hot-extrusion systems in plastics industry and in oxidation, LUKOIL THERMO 32 achieves life times of a wide range of applications in chemical industry. several years in both closed and open circulating systems even at extremely high process temperatures. LUKOIL THERMO 32 is an extremely effective cleaning agent and does not form residual deposits. Used in conjunction with favourable technical heat ratings, outstanding values for heat transport and transfer can be achieved. With its excellent cold-start properties a problem-free starting up of systems even extremely low temperatures is guaranteed. LUKOIL THERMO 32 is compatible with all standard materials and sealing materials found in heat-transfer systems.
TYPICAL TEST DATA
PROPERTY Units Test methods LUKOIL THERMO 32
Density at 15°C kg/m³ DIN 51757 875
Flash point COC °C ISO 2592 >210 Viscosity at 40°C mm²/s DIN 51562/T1 34 Viscosity at 100°C Mm²/s DIN 51562/T1 5.7 Pour point °C DIN ISO 3016 <-33 The information given in the typical data does not constitute a specification but is an indication based on current production and can be affected by allowable production tolerances. The right to make modifications is reserved by OOO “LLK-International”.
28 September 2017, Page 1/2
* This document supersedes all previous versions Further information can be obtained from Technical Marketing Service Lubricants technics.lubes@lukoil.com
LUKOIL Lubricants Europe GmbH +43(1)205 222-8800
Uferstrasse 8 1220 Vienna, Austria www.lukoil-lubricants.eu member of:: General characteristic values Boiling point DIN 51356 360 °C Water content DIN ISO 3733 <0.01 % by mass Neutralisation value DIN 51588 T1 <0.05 mg KOH/g Content of solid foreign substances DIN 51592 <0.01 % by mass Corrosive effect on copper DIN 51811 1A Application properties Upper operating limits: Permissible flow temperature 290 °C Permissible film temperature 300 °C Lower operating limit: Filling and start-up (<300 mm²/s) at >1 °C Economic operation (<5 mm²/s) at >103 °C Liquid limit (pour point) DIN ISO 3016 -33 °C Flash point DIN ISO 2592 210 °C Ignition temperature DIN 51794 310 °C Carbon residue CCR DIN 51551 0.19 % by mass Ash content (oxide ash) DIN EN 7 <0.11 % by mass Asphalt content DIN 51595 0% Coefficient of thermal expansion 0.085 vol % /°C Table 2: Thermal characteristics
Temp. Density Specific heat Thermal conductivity kin. viskosity Prandtl-No.
* This document supersedes all previous versions Further information can be obtained from Technical Marketing Service Lubricants technics.lubes@lukoil.com
LUKOIL Lubricants Europe GmbH +43(1)205 222-8800
Uferstrasse 8 1220 Vienna, Austria www.lukoil-lubricants.eu member of::