Sei sulla pagina 1di 1

2. This unit may include small parts, please 12.

Please do not insert a battery backwards; the FEATURES


Please keep out of reach from keep out of reach of children and pets. device will not operate and no vapor will be
children and pets. 3. Do not mishandle your Cool Fire Ⅱ, though it’s produced. Clearomizer/Atomizer
made of metal it may be damaged if dropped. 13. Innokin is not responsible for battery

AL
4. Don’t attempt to repair the unit by yourself as explosions due to the use of a low quality
U
Rotational wheel for adjustmets

MAN
Do not immerse battery in liquid, damage or personal injury may occur. battery; The Cool Fire Ⅱ kit does not include
5. We recommend you use only high drain 18350 any batteries or chargers.
R
USE
fire, or extreme heat.
batteries (without protection, maximum current
output is more than 5000mA.) Any other types
WARNING: of batteries may damage your Cool Fire Ⅱ.
Warranty
This is a vaping device only. Do to the shape of 6. In order to guarantee the normal functioning
of your Cool Fire Ⅱ and to receive the best Please consult with official Innokin distributors
this device there may be some confusion about
vaping experience we suggest that you charge for their warranty and return policy. Innokin’s
its function.
your batteries when they are below 10% power. warranty does not apply to products purchased
Please ensure that if using this device in public
7. In order to prolong the operating life of your through third party vendors. Power button
it is always used intelligently, and for your own
safety never use this product in a way which Cool Fire Ⅱ, please do not place it in
may be misunderstood or misconstrued. excessively hot or cold environments.
8. Please obey local laws or regulations while
BASIC PARAMETERS
Please read these instructions carefully before vaping. If there are any bans or potential The standby current: 150uA maximum Battery negative(-) cap
using your new Cool Fire Ⅱ. dangers, please keep your Cool Fire Ⅱoff. Maximum output voltage:6.0V (unloaded)
1. The Cool Fire Ⅱis only to be used by people 9. Your Cool Fire Ⅱ is not waterproof, please keep Scale Display Wattage
it dry at all times. Maximum output current:5.0A
of legal age (18+). This device is NOT to be used Scale display wattage improves intuitive control
(Built in 7A fuse for protection and stability.)
by non-smokers, children, pregnant or 10. Keep your Cool Fire Ⅱ from sources of and provides more accurate performance.
breastfeeding women, people with or at risk of excessive heat. Maximum output wattage:12.5W (Watts mode)
heart disease, or people taking medication for 11. Please don’t drop, throw or abuse your Cool Resistance of clearomizer: 1.0 ohm (minimum) Variable Wattage:
depression or asthma. The Cool Fire Ⅱ is Fire Ⅱ, you may cause damage to the outer The rotational wheel adjusts wattage to the
Battery: High drain 18350 (without protection,
neither intended for, nor marketed as, a quit shell or Inner components. following: 7.0, 8.0, 8.5, 9.0, 9.5, 10.5, 11.0,
maximum current output is more than 5000mA.)
smoking aid or smoking cessation device. 12.0, 12.5 .

Low Voltage Warning. OFF Mode LED Light Blinking Mode NOTES
Quickly click the “ ” button three times to The LED light will blink different colors to indicate
Overtime Vaping Warning (10 seconds switch Replace the atomizer if vapor volume decreases,
power off your Cool FireⅡ current battery voltage.
cutoff). or refill when liquid levels are low.
Battery safety protection (Vent holes). PRESS 1. Red LED light = Battery voltage is lower than The manufacturer is not responsible for a
damaged atomizer, cartomizer or clearomizer.
High compatibility 510 connector: Will fit 3x 3.6V
Never use your Cool Fire Ⅱ without an atomizer,
The red LED will blink six times and turn off if the 2. Yellow LED light = Battery voltage is between
rotational wheel is not in place. iClear16, iClear30 and iClear30S etc dual coil cartomizer or clearomizer.
3.6V - 3.75V
To set your desired wattage turn the rotational clearomizers, as well as standard 510 accessories. Please consult your atomizer documentation for
3. Green LED light = Battery voltage is higher than
wheel to the left or right until you hear a click. 3.75V proper usage instructions.
When you adjust the wattage with the rotational 4. The Red LED will keep blinking for 8 seconds Use the Cool FireⅡ only as intended.
wheel please check the wheel is set to your
OPERATION GUIDE
when battery capacity is lower than 3.3V. When
desired wattage. When a battery is installed, the LED light will blink power is low there will be no output and after 3
from red to yellow to green the Cool Fire Ⅱwill consecutive low power warnings the device will
Battery Level Indicator: be in off mode. Battery Capacity Display power OFF.
The battery capacity is displayed via green, The LED lights will display green, yellow or red to 5. If a load short circuit is detected the Red LED
yellow, and red LED lights. “ ” button: ON/OFF battery switch. indicate full battery charge, half capacity or if light will stay lit for 5 seconds and no vapor will
Green = Fully Charged To enable or disable the batter unit quickly push charging is needed. be produced when the “ ” button is pressed.
Yellow = Half Discharged the “ ” power button three times. 6. 10 seconds cutoff: If the “ ” button is held
Red = Charge Needed Once powered on, hold the button down to down for 10 seconds or longer the LED will
Home of iTaste Vapers: Check the security code:
activate the unit and commence vaping. blink 10 times then turn off. The Cool Fire Ⅱwill
Reverse Battery Protection Circuit. automatically shut off until the “ ” button is
released and pressed again.
Built in 7A fuse for protection and stability. ON Mode
Quickly click the “ ” button three times to
Short Circuit Protection.( 0.6 +/-0.2 ohm )
power on your Cool FireⅡ; the LED light will blink
ON/OFF battery switch. from red to yellow to green. Once powered on,
holding down the “ ” button will fire the device.
LED Battery Power Display.

尺寸:57*95mm, 5折页
颜色:四色印刷
材质:128g双铜板纸正反两面印刷

新宜康科技有限公司
比例 Scale 100% 单位 Unit mm 符合RoHS标准 INNOKIN TECHNOLOGY CO.,LTD

修改日期 修改内容 型号 料号 页次
NO. Cool Fire II
修改记录

Modify date Modify Content Model Part NO. Page


名称 客户 1 of 1
1 2013.12.13 印刷内容修改 Name 英文说明书 Customer 中性
2 2013.12.26 印刷内容修改 制作
Made 陶红林 确认 Confirmed 核准 Approved

日期 2013.10.17
Date

Potrebbero piacerti anche