Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Version Data-sheet
V1.2
Date 2017-11-14
Cautions........................................................................................................................................... 4
1 Overview......................................................................................................................................5
2 Features....................................................................................................................................... 6
3 Application..................................................................................................................................6
4 Specification............................................................................................................................... 7
5 Mechanical Size.......................................................................................................................... 8
7 Software Platform......................................................................................................................8
10 Package................................................................................................................................... 13
11 Problem Solving.................................................................................................................... 13
12 Video Link...............................................................................................................................15
CNDingtek ® Keep own best to solved the manuals should be accurate very close to the
configuration, protocol operation and installation. But CNDingtek® reserves the right to
modify the hardware, software, color, specification, guide, package and etc without further
notice.
Due to the manually photos of products and after its printing reasons, the photos in this
document maybe different from the real released product, please use the released product
as the final reference.
* Notes: based on the application of 4 times status change (two vehicles enter
and leave).
2 Features
Following features of parking occupation sensor DO100 LoRaWan version.
3 Application
Dimension 115*115*50mm
115mm*115mm*50mm
(Notes: only for reference, real product update frequently without notification.)
7 Software Platform
7.1 Network Diagram
The data about user of device will be collect from the D0100 parking occupation
sensors will be received to the GSM/GPRS network. After that the data from usage
sensor of GPRS network will be transferred through the internet to the IoT cloud
Network (Internet of Things).In the next step the data will be received to the user
through the internet at the application software and the user can see manually
status about his installed devices at any time and any place but for IoT internet is
very important part of that process.
The application software or WEB/APP is major source of to collected data to monitor the
data of check the status of devices manually to the user .The WEB/APP is useful for the
customer for the following usage.
Make one hole on ground which can put the sensor into. No need to be much bigger, it is
enough if the top cover of sensor can be at same level as the ground.
Drill 3 small hole for expansion screw. Connect with expansion screw.
Use magnetic coin near the sensor especially the one with black point label. Keep for 5
seconds, then take the magnetic coin far away. The sensor led will flash and the sensor will
restart. For the first 30 seconds (0.5 minute), the module will be in at learning mode. Please
keep no vehicle at top of the sensor. After the 30seconds learning mode the sensor will be
ready.
After installation, the sensor status will be displayed on the system while occupation status
changed and it is test platform of LoRaWan parking occupation sensor.
Part List
NO. Item Quantity Remark
3 Manual 1
11 Problem Solving
Problem Reason Resolving
Considering shipping rules circuit should
not be connected to the battery . So user
should open cover and connect battery
Check battery power
with the PCB board. For some version
connected or not
with magnetic part outside please remove
No data received the magnetic part then the battery will
power on the sensor.
If LoRaWan version, the gateway
LoRa gateway frequency frequency should work with the LoRaWan
not match module band. please configure the sensor
or gateway to make them match.