Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
UNIVERSITITEKNIKAL MALAYSIA
TEKNIKAL MELAKA
MALAYSIA MELAKA
FACULTY OF MECHANICAL ENGINEERING
FACULTY OF MECHANICAL
MECHANICAL ENGINEERING
ENGINEERING LABORATORY III
MECHANICAL ENGINEERING LABORATORY III
BMCG 3011
BMCG 2011
INFORMAL REPORT
BIL: NAME: MATRIX NO:
1. MUHAMAD SYAZWAN BIN ABDUL KADIR B041510140 CLASS SESSION:
2. MUHAMMAD AFIQUDDIN BIN NASAHROM B041510141
3/7
3. MUHAMAD ALIF BIN AZMI B041510174
4. MUHAMMAD FAIZ IZWAN BIN MOHD YUSOF B041510157
5. MUHAMMAD HANAFI BIN AHMAD FAIZAL B041510213
LAB GROUP:
B2
REPORT SUBMISSION
DATE:29/4/2019
LECTURER: PN. NOR IZYAN BINTI ZULKAFLI/DR NIDZAMMUDIN BIN MD. YUSOF
TOTAL
1.0 OBJECTIVE
Figure
2 shows
water
inlet and outlet temperature for 1.0kW
Figure 3 shows
water inlet
and outlet
temperature for 1.5kW
Figure 4 shows graph of relationship for three different power
CONCLUSION
For the conclusion, the experiment can be concluded that if the power of the heater is increasing
the temperature increase and the cooling range of the tower will also increase. The aim of the
experiment is to achieve the successful investigation of the relationship between cooling load
and cooling range. We have discovered many different things while conducting this experiment.
Other than that, importance things that we just noticed on the experiment is always make sure the
system is running at the steady state before start collecting the date during the experiment
running.