Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Student’s Handbook |
B.Tech (EEE VIII Sem)
Subjects:
18
Student’s Handbook | B.Tech (EEE VIII Sem) 2018
FOREWORD
Dear Student,
We, at DBGI, are committed to facilitate all aspiring students in their selection of different streams of
B.Tech. by putting our efforts in terms of commitment, providing the services of quality and skill
oriented education.
The exponential expansion in the field of technology has offered a plethora of job opportunities in
emerging sectors. It has also resulted in innumerable demand for qualified “skilled” manpower in
these sectors.
At this crossroads of your life where a wrong turn can take you miles away from your goal. Choosing
your career path is an important step because your future is at stake. It is generally observed that a
large section of students are unaware of what they want to achieve in their life. This amounts to a
situation like boarding a train without knowing one’s destination. Undoubtedly it may result in waste
of precious time and money.
Student Handbook is purposely designed for the students. We have been planning for some time to
provide collective information about academics as well as Institute to our new comers. It comprises
complete information of syllabi of all subjects, Lecture Plans, assignments, question bank, tutorials,
marking scheme etc. However in addition to this, if students have any problem or query they can
contact Student Information Cell.
We are living in a competitive world; the key to edging out of competition is information and
preparation.
We hope that this booklet gives you enough leverage to understand about the institute and academics.
Success to a large extent depends on your attitude which includes your sincerity and strong will to
vigorously pursue your goal. It’s your determination to fulfill the requirements that are needed to
enable you achieve your goal. It means you have to acquire the required academic qualification and
skills followed by professional qualification and training in your particular field. Once you have these,
you will be able to compete.
CONTENT
1 Evaluation Scheme
2 Syllabus
2.1 Electric Drives
2.2 SCADA & Energy Management
2.3 Biomedical Instrumentation
2.4 EHV AC&DC
2.5 Electric Drive Lab
2.6 Project
2.7 Discipline
3 Lecture Plan
3.1 Electric Drives
3.2 SCADA & Energy Management
3.3 Biomedical Instrumentation
3.4 EHV AC&DC
4 Assignment
4.1 Electric Drives
4.2 SCADA & Energy Management
4.3 Biomedical Instrumentation
4.4 EHV AC&DC
5 Question Bank
5.1 Electric Drives
5.2 SCADA & Energy Management
5.3 Biomedical Instrumentation
5.4 EHV AC&DC
1 Evaluation Scheme
Unit I: (7L)
Fundamentals of Electric Drive:
Electric Drives and its parts, advantages of electric drives, Classification of electric drives, Speed-torque
conventions and multi-quadrant operations, Constant torque and constant power operation, Types of load, Load
torque: components, nature and classification
Unit V: (8L)
Power Electronic Control of AC Drives
Three Phase induction Motor Drive, Static Voltage control scheme, static frequency control scheme (VSI, CSI,
and cyclo- converter based) static rotor resistance and slip power recovery control schemes. Special Drives
Switched Reluctance motor, Brushless dc motor.
Reference Books:
1. M.Chilkin, “Electric Drives”, Mir Publishers, Moscow.
2. Mohammed A. El-Sharkawi, “Fundamentals of Electric Drives”, Thomson Asia, Pvt. Ltd.
3. N.K. De and Prashant K.Sen, “Electric Drives”, Prentice Hall of India Ltd
Books Recommended:
1. Torsten Cergrell, " Power System Control Technology", Prentice Hall International.
2. George L Kusic "Computer Aided Power System Analysis",, Prentice Hall of India,
3. A. J. Wood and B. Woolenberg, "Power Generation Operation and Control", John Wiley & Sons.
4. Sunil S Rao, "Switchgear Protection & Control System" Khanna Publishers 11th
Unit I: Introduction 8L
Need of EHV transmission, standard transmission voltage, comparison of EHV AC & DC
transmission systems and their applications & limitations, surface voltage gradients in conductor,
distribution of voltage gradients on sub-conductors, mechanical considerations of transmission lines,
modern trends in EHV AC & DC transmission.
Unit II: EHV AC Transmission 8L
Corona loss formulas, corona current, audible noise- generation and characteristics corona pulses their
generation and properties, radio interference (RI) effects, over voltage due to switching,
ferroresonance, reduction of switching surges on EHV system, principle of half wave transmission.
Reference books:
1. M.H Rashid,”Power Electronics: Circuit, Devices and Applications “Prentice hall of India.
2. S .Rao, “EHV AC & HVDC Transmission Engineering and practice” Khanna Publishers.
DBIT DEHRADUN
LESSON PLAN
7. Thermal model of motor for heating and cooling T1&R2 2 Chalk & Talk
10. Purpose and types of electric braking, braking of T2&R1 2 Chalk & Talk
dc, three phase induction and synchronous
motors.
11. Dynamics During Starting and Braking: T2&R1 3 Chalk & Talk
Calculation of acceleration time and energy loss
during starting of dc shunt and three phase
induction motors.
12 methods of reducing energy loss during starting. T2&R1 4 Chalk & Talk
Energy relations during braking, dynamics during
braking
13. Single phase and three phase controlled T1&R1 2 Chalk & Talk
converter fed separately excited dc motor drives
(continuous conduction only)
14. dual converter fed separately excited dc motor T1&R2 3 Chalk & Talk
drive
16. Chopper control of separately excited dc mot T2&R1 2 Chalk & Talk
DBIT/BTech/EEE/01
17. Three Phase induction Motor Drive T1&R1 2 Chalk & Talk
.
18. Static Voltage control scheme, static frequency T1&R2 2 Chalk & Talk
control scheme
19. static rotor resistance and slip power recovery T2&R1 2 Chalk & Talk
control schemes.
Total Lectures: 50
TEXT BOOKS:
REFERENCE BOOKS:
Approved By
Signature of HOD:__________
Date: __________
DBIT/BTech/EEE/08
DBIT DEHRADUN
LESSON PLAN
3. Finite state machines and regular expressions and their T1 2 Chalk & Talk
applications to lexical analysis.
4. Basic transducers principle, Active and passive transducers, T1 2 Chalk & Talk
transducer for biomedical applications.
5. Generation T1 1 Chalk & Talk
10. Circulation block diagram blood pressure and measurement T1 1 Chalk & Talk
11. Characteristics of blood flow and heart sound. T1 2 Chalk & Talk
12 Basic Parsing Techniques: Parsers, Shift reduce parsing, T1 1 Chalk & Talk
operator precedence
13. Electrocardiography T1 1 Chalk & Talk
14. ECG an lead, configuration, ECG recording and their types T1 2 Chalk & Talk
15. Nervous System: The anatomy of nervous system, neuronal T1 2 Chalk & Talk
communication, EPSP, IPSP.
16. Organization of brain, Measurement from the nervous system T1 1 Chalk & Talk
17. Systematic skin and body temperature measurement, T1 2 Chalk & Talk
18. Temperature measurement, Brief idea about ultrasonic T1 1 Chalk & Talk
measurements
19. Patient Care Monitoring: Element of intensive care, T1 2 Chalk & Talk
Organizational the hospital fore patient-care monitoring.
20. Pace makers-type, systems, mode and generators, T1 2 Chalk & Talk
22. Biotelemetry and application of telemeter inpatient care T1 2 Chalk & Talk
23. Automation of Chemical Test: Instrumentation for diagnostic T1 2 Chalk & Talk
X rays.
24. Interfacing computer with medical instrumentation and other T1 1 Chalk & Talk
equipments
DBIT/BTech/EEE/08
Total Lectures: 52
TEXT BOOKS:
[T1] Dr. O.N. Pandey, “ Fundamentals of Biomedical Instrumentation”, Kataria and sons.
REFERENCE BOOKS:
[R1] Cromwell- Biomedical Instrumentation and Measurements- PHI.
[R2] Pandey & Kumar-Biomedical Electronics and Instrumentation. - Kataria
DEV BHOOMI INSTITUTE OF TECHNOLOGY, DEHRADUN
ASSIGNMENT SHEET
1 Define electric drive and what are the basic element of electric drive.
2 Draw the block diagram of electric drive and write the classification of electric drive.
1 List out the advantage and disadvantage of electrical braking over mechanical braking.
2 Explain the speed torque characteristics of three phase induction motor with neat diagram.
3 Explain about the quadrantal diagram of speed torque characterstics for motor driving hoist load.
1 Expain with neat sketch the chopper control method of speed control of dc motor.
2 Explain with neat sketch about the dc shunt motor speed control by using single phase fully controlled
bridge converter.
5 What are the advantages and disadvantages of solid state drive methods.
6 Explain the single half wave converter drive speed control for dc drive with waveform.
DEV BHOOMI INSTITUTE OF TECHNOLOGY, DEHRADUN
ASSIGNMENT SHEET
(b) Explain the multicontrol centers systems. Also mention their salient features and advantages.
2. Explain EMS and network data basis. Also give the details of EMS systems.
3. What are different types of SCADA configuration?
4. Explain Dual Redundant Controller System/ Processor?
5. What are the basic components of programming language?
DBIT/B. Tech/EEE/02
1. Explain the energy- management center. Also discuss the advantages and limitations of energy
management center.
2. Discuss the distributed centers and power pool management. Also mention their advantages and
disadvantages.
3. Discuss the functions performed at a centralized management center in power system
environments.
4. Explain the production control and load management economic dispatch in power system
environments. Enlist the advantages and disadvantages of load management economic dispatch in
systems.
5. What do you mean by SCADA/EMS/DMS Architectures? Discuss objective & function of EMS?
6. What are the objectives of Automation Generation Control (AGC)?
7. Give the name of sub functions which are performed under power system monitoring.
DEV BHOOMI INSTITUTE OF TECHNOLOGY, DEHRADUN
ASSIGNMENT SHEET
3. Explain man instrument system? What are different component of the man instrument system?
5. What are the different types of transducer used for the measurement of bio signals?
10. Explain EMG with complete detail and its practical application?
DEV BHOOMI INSTITUTE OF TECHNOLOGY, DEHRADUN
ASSIGNMENT SHEET
1. What are the basic types electrodes used in the bioelectric field?
4. What is Cardiovascular System? Explain with suitable diagram? How its measurement has
been done?
6. Explain circulation block diagram blood pressure. What are the characteristics of blood flow?
10. What is nervous system? Explain the anatomy of the nervous system?
DEV BHOOMI INSTITUTE OF TECHNOLOGY, DEHRADUN
ASSIGNMENT SHEET
3. How the interfacing of the computer with the medical instrument has been done?
9. What is CT scan? Explain with diagram how it work for patient monitoring?
UNIT 1
1. Define Electric Drives & What are the basic elements of Electric Drives?Draw the block diagram
of Electric Drive & Write the classification of Electric Drives.
2. What are the factors influencing the choice of electric drives?
3. Compare A.C drives and D.C drives.
4. Explain the different types of loading of drives.
5. Explain the choice of selection of the motor for different loads.
6. Explain the Speed-torque conventions and multi-quadrant operations
7. What is the Constant torque and constant power operation?
8. Draw the speed –torque characteristics of all types of DC Motors.
9. Classified different types of load, Load torque: components on the basis of nature.
10. What is meant by Group drive? Give an example.
11. What is meant by Individual drive? Give an example.
12. What is meant by Multimotor drive? Give an example.
13. What are the advantages and disadvantages of Individual drive system?
14. What are the advantages and disadvantages of Group drive system?
UNIT 2
UNIT 3
1. List out the advantages and disadvantages of electrical braking over mechanical braking.
2. Discuss any one method of electrical braking of DC Machines.
3. Explain the Speed-Torque characteristics of three phase induction motor with neat diagrams.
4. Explain about the speed-torque characteristics of a DC Shunt Motor with suitable graph and
equations.
5. Explain about the quadrantal diagram of speed-torque characteristics for a motor driving hoist
load.
6 Explain the various methods of braking of induction motors.
7 Draw and explain various load characteristics of DC Shunt Motor.
8 Explain Rheostat braking in DC Series Motor and Plugging in DC Shunt Motor.
9 Explain various methods of braking of DC Shunt Motors with neat diagrams.
10 Explain Various methods of braking of DC Series Motors with neat diagrams.
11 Explain the speed – torque curve of single phase induction motors in detail.
12 Explain the method of regenerative braking employed in DC Motors.
13 Explain about the speed-torque characteristics of a DC Compound Motor with suitable graph and
equations.
14 Differentiate Mechanical and Electrical Braking.
15 Give the types of braking used for DC Motors. What is meant by Regenerative braking in DC
Motor?
UNIT 4
1. Explain with neat sketch the chopper control method of speed control of DC Motors.
2. Explain with neat sketches about the DC Shunt Motor speed control by using single phase fully
controlled bridge converter.
3. Discuss the Ward-Leonard speed control system with a neat circuit diagram. Also mention its
advantages and disadvantages.
4. Explain how the speed of a DC Shunt Motor can be varied both above and below the speed at
which it runs with full field current.
5. Explain with neat sketch the operation of chopper fed DC Series Motor drive.
6. Explain the speed control schemes of DC Series Motor.
7. Explain the different methods of speed control employed in DC Shunt Motor.
8. Explain the control of DC drives using rectifiers and choppers.
9. Explain the single phase half wave converter drive speed control for DC drive with waveforms.
10. Explain in detail the single phase semi-converter speed control for DC drive for separately excited
motor.
11. A 500V series motor having armature resistance and field resistance of 0.2 Ω and 0.3 Ω
respectively runs at 500 rpm when taking 70A. Assuming unsaturated field, find out its speed
when field diverter of 0.684 Ω is used constant load torque.
12. What are the advantages and disadvantage of solid state drive methods?
UNIT 5
UNIT-1
1. Explain the role of Alarm in SCADA?
2. Differentiate between “INDUSTRIAL CONTROLLER” and “DOMESTIC CONTROLLER”
with suitable point.
3. What do you mean by "SCADA" system? Also mention its advantages and disadvantages over
P.M.U systems?
4. List the various types of automation with example?
5. What do you mean by the term ‘communication channel’? Give the list of various communication
channels used in SCADA system?
6. What do you mean by the term ‘Automation’? Explain briefly types of ‘automation’?
7. What do you mean by the term ‘SCADA’? Explain Data acquisition modes?
8. What is the difference between Sensor & Transducer?
9. Sketch & Explain the block diagram of SCADA?
10. Mention some of the application areas of SCADA.
11. What is CIMPLICITY?
12. What is SCADA? Give any four editors available in SCADA package
13. What is the significance of DCS?
14. What is LCU?
UNIT-2
1. Explain the following :-
(i) On/Off control of lines
(ii) Data disturbance collection and analysis' Explain Data acquisition modes?
2. Explain Briefly ‘Role of SCADA in industrial automation’?
3. Explain the List of various function & features of SCADA?
4. What do you mean by Regulatory Functions,' in "SCADA" systems? Also mention its
significances.
5. Explain Centralized Control & Multi control center system?
6. Discuss the general power system hierarchical structure? Also rnention its importances.
7. Explain the following :-
(i) Power line carrier
(ii) Microwaves
(iii) Fiber optical channels and Satellites
8. What do you mean by regulatory function used in SCADA?
9. Explain the factor which is used in Selection of RTU’S?
10. Explain the role of alarms used in SCADA?
11. Sketch & explain the structure of Local control System?
12. Explain Dual Redundant Controller System/ Processor?
13. What are the basic functions of computer aided process control system?
14. List the functionalities of SCADA.
UNIT-3
UNIT-4
2. Explain EMS and network data basis. Also give the details of EMS systems.
3. What are different types of SCADA configuration?
4. Explain Dual Redundant Controller System/ Processor?
5. What are the basic components of programming language?
6. Explain the energy- management center. Also discuss the advantages and limitations of energy
management center.
7. Discuss the distributed centers and power pool management. Also mention their advantages and
disadvantages.
8. Discuss the functions performed at a centralized management center in power system
environments.
9. Explain the production control and load management economic dispatch in power system
environments. Enlist the advantages and disadvantages of load management economic dispatch in
systems.
10. What do you mean by SCADA/EMS/DMS Architectures? Discuss objective & function of EMS?
11. What are the objectives of Automation Generation Control (AGC)?
12. Give the name of sub functions which are performed under power system monitoring.