Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Previous Next
Index
Configure the user name, password, and other information that allow IBM® to communicate
with the integrated hardware server.
Read Planning for the service processor connection for information required to configure
the IMM.
You need the BladeCenter or System x service processor to complete this task.
This process picks up from any of the screens after signon on the IMM web browser
interface.
Note
If you are signing into the IMM service processor for the first time, you might need to
configure the IP address and DHCP settings. See Configuring the IMM IP address and
https://www.ibm.com/support/knowledgecenter/pt-br/ssw_ibm_i_71/rzahq/configimm.htm 1/4
4/25/2019 Configuring the IMM
g g g g
DHCP settings .
1. Open a Web browser. In the address field, type the IP address of the IMM to which you
want to connect. The Enter Password window opens.
2. Use the default login ID value of USERIDand password value of PASSW0RD(with a zero
instead of O) to sign on.
3. Select Login Profiles from the navigation pane on the left side of the screen.
4. From the list of login IDs pane, select Add User . The Login Profile window is displayed
a. Change the Login ID (work sheet item XSP7 ) and enter values for the
Password (work sheet item XSP8 ) and Confirm password fields based on the
information entered in the BladeCenter or System x service processor work
sheet .
c. Click Save .
6. Log off and log back on using the new Login ID and Password.
7. Select Login Profiles from the navigation pane on the left side of the screen.
8. From the list of login IDs pane select user ID USERID. At the next pane select Clear
Login Profile to delete this default.
9. On the navigation pane on the left side of the window, select Network Interfaces under
IMM Control to start the configuration.
10. Use the values in the BladeCenter or System x service processor to complete the
following steps:
b. From the DHCP list, select and set one of the following (work sheet item XSP3
):
ii. Enabled - Obtain IP config from DHCP server . This option requires a
DHCP server when you install the operating system.
c. Enter a name for this IMM in the Hostname (work sheet item XSP2 ) field.
d. Enter the value for the following fields under the Static IP Configuration
heading if the Disabled - Use static IP configuration value was selected for the
DHCP field:
Subnet mask - type in the subnet mask (work sheet item XSP5 ).
Gateway address - type in the gateway address (work sheet item XSP6 ).
11. Select System Settings in the navigation pane on the left side of the window.
12. On the same window, under the heading IMM Date and Time , click Set IMM Date and
Time .
13. On the next window, set the current date and time (using a 24-hour clock) and use the
GMT offset list to select the appropriate time zone. Also, select the box to automatically
adjust for daylight saving time, if necessary. Click Save to complete.
14. When all updates and configuration steps are complete, select Restart IMM on the
navigation pane to restart the Integrated Management Module.
15. Click OK to confirm that you want to restart the Integrated Management Module. A
window is displayed advising that the browser window will be closed. Click OK to
continue.
Parent topic:
Updating firmware and configuring System x IMM
Related reference
Integrated server installation road map
Related topics:
https://www.ibm.com/support/knowledgecenter/pt-br/ssw_ibm_i_71/rzahq/configimm.htm 3/4
4/25/2019 Configuring the IMM
Configure IMM
Abra um chamado e faça o download de correções no Portal de Suporte IBMOpen a call and download
fixes from the IBM Support Portal
Localize uma melhor prática para integrar tecnologias no IBM RedRed booksbooks
Portuguese
https://www.ibm.com/support/knowledgecenter/pt-br/ssw_ibm_i_71/rzahq/configimm.htm 4/4